[ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage

2023-08-29 Thread matthew.st...@fujitsu.com
Upload the iso to one of the data domains you use for your VMs. -Original Message- From: Mikhail Po Sent: Tuesday, August 29, 2023 12:22 AM To: users@ovirt.org Subject: [ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage For the initial installation of the operating

[ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage

2023-08-28 Thread matthew.st...@fujitsu.com
I'm not sure what you mean by your "example", nor why you would need a dedicated ISO Storage Domain, when that practice was ended a while ago. I have several "datacenters", all using iSCSI and FC SAN storage, but I keep an NFS storage domain available to copy ISO's and templates, and to move

[ovirt-users] Re: Expand the disk space of the hosting engine

2023-01-02 Thread matthew.st...@fujitsu.com
You allocated a 100G storage domain. Within that storage domain, you allocated a 50G disk to hold the disk image. Just like any other storage domain, you can create additional disks. I have seen warnings, for going over 80% allocated within this storage domain. When building the

[ovirt-users] Re: Expand the disk space of the hosting engine

2022-12-30 Thread matthew.st...@fujitsu.com
ease it... Em qui., 29 de dez. de 2022 às 18:53, matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> mailto:matthew.st...@fujitsu.com>> escreveu: If you used the default image for your self-hosted-engine, it will create the disk of the size you specified, (50GB) but only al

[ovirt-users] Re: Expand the disk space of the hosting engine

2022-12-30 Thread matthew.st...@fujitsu.com
sk is only 58GB and I can't increase it... Em qui., 29 de dez. de 2022 às 18:53, matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> mailto:matthew.st...@fujitsu.com>> escreveu: If you used the default image for your self-hosted-engine, it will create the disk of the siz

[ovirt-users] Re: Expand the disk space of the hosting engine

2022-12-29 Thread matthew.st...@fujitsu.com
If you used the default image for your self-hosted-engine, it will create the disk of the size you specified, (50GB) but only allocate the space it actually requires. This means the remaining space on the allocated disk, is there, unused. Since it setup with LVM, you can use 'fdisk' to

[ovirt-users] Re: ovirt node Emulex network

2022-12-19 Thread matthew.st...@fujitsu.com
Elrepo also has packages for the drivers that RedHat decided to remove. Of course, you could just purchase some supported Network Interface Cards. -Original Message- From: Darrell Budic Sent: Monday, December 19, 2022 5:41 PM To: parallax Cc: users Subject: [ovirt-users] Re: ovirt

[ovirt-users] Re: Recombining disks under a single VM

2022-12-10 Thread matthew.st...@fujitsu.com
Scratch this query. It appears we had two identical images. It wouldn't permit importing due to matching disk id's. From: matthew.st...@fujitsu.com Sent: Saturday, December 10, 2022 10:24 PM To: users@ovirt.org Subject: [ovirt-users] Recombining disks under a single VM Up until now, we've

[ovirt-users] Recombining disks under a single VM

2022-12-10 Thread matthew.st...@fujitsu.com
drive as an un-importable VM on the NFS storage partition, mounted on datacenter TWO. Any hints on how I "merge" these two, back into one function VM? == matthew.st...@fujitsu.com ___ Users mailing list -- users@ovirt.org To unsubscribe sen

[ovirt-users] Re: Moving SelfHosted Engine

2022-08-31 Thread matthew.st...@fujitsu.com
Assuming your are using SAN or NAS storage, have you considered just collapsing everything into the Default cluster? -Original Message- From: murat.cel...@dbpro.com.tr Sent: Wednesday, August 31, 2022 9:41 AM To: users@ovirt.org Subject: [ovirt-users] Moving SelfHosted Engine Hello We

[ovirt-users] Re: Lost space in /var/log

2022-06-22 Thread matthew.st...@fujitsu.com
Deleted some files to "clean up" /var/log, but the space was not recovered? Space for deleted files are only recovered when all references to that space are removed. This includes the directory reference, and any open file-handles to the file. The is a popular trick for a self-deleting

[ovirt-users] Re: Migrate Hosted-Engine from one NFS mount to another NFS mount

2022-02-23 Thread matthew.st...@fujitsu.com
I’ve always been told that migrating self-hosted-engine storage was a backup, shutdown, and rebuild from backup procedure. In my iscsi environment it has never worked. (More due to the history of my environment, than the procedure itself.) Since we have too many hosts in a datacenter, we’ve

[ovirt-users] Re: ovirtmgmt VLAN and IP Change

2022-02-19 Thread matthew.st...@fujitsu.com
iSCSI environment. -Original Message- From: Abe E Sent: Saturday, February 19, 2022 2:09 PM To: users@ovirt.org Subject: [ovirt-users] Re: ovirtmgmt VLAN and IP Change How did you do this if the host had a gluster volume on it though? Mine does not let me remove due to that.

[ovirt-users] Re: ovirtmgmt VLAN and IP Change

2022-02-19 Thread matthew.st...@fujitsu.com
I had to do this for a number of hosts last year. I put the host into maintenance, and then removed it. I used 'nmtui' to change the hostname. (Changing hostname suffix from two digits to three digits) (Probably could have used hostnamectl) I change directory to

[ovirt-users] Need help in dumping a table

2022-01-05 Thread matthew.st...@fujitsu.com
I'm planning a re-organization of my oVirt environment. I need a Postgres command-line to dump a listing of VMs/disks/storage_domains. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: about the password of the engine host and worker KVM hosts

2021-09-17 Thread matthew.st...@fujitsu.com
My understanding, is that OLVM/oVirt use the root password to push it's SSH credentials at first login. Once that is done, all other SSH access is though those credentials. You should be able to change the root password without issue. From: Tommy Sway Sent: Friday, September 17, 2021 4:12 AM

[ovirt-users] Re: oVirt 4.3 DWH with Grafana

2021-09-15 Thread matthew.st...@fujitsu.com
does not exist" message:"pq: column "count_threads_as_cores" does not exist" Many of the other reports worked fine, with only a few similar errors. Is this caused by version incompatibility? After all, 4.4 in the original document was replaced with 4.3 before the import. From

[ovirt-users] Re: 2-node with FC Storage

2021-09-15 Thread matthew.st...@fujitsu.com
One path per controller though its own switch is usually enough. I install multiple links between storage and switches, to increase the bandwidth of that link. But I've never done that between switches and hosts. Link A from host to Switch A to Storage Controller A Link B from host to Switch

[ovirt-users] Re: oVirt 4.3 DWH with Grafana

2021-09-14 Thread matthew.st...@fujitsu.com
The instructions to modify the json files are missing. (Using find and sed to change all instances of v4_4_ to v4_3_ before importing them into Grafana) This is from an Oracle Blog on the doing this with OLVM 4.3 (which is basically a repackaged oVirt 4.3) Build Grafana Dashboard for Oracle

[ovirt-users] Re: Q: Node Upgrade Path

2021-07-08 Thread matthew.st...@fujitsu.com
yum install https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.0-1.el7.noarch.rpm On 7/8/21 8:41 PM, matthew.st...@fujitsu.com wrote: > If the hardware is old, and won't support EL8, the best option is to update > to oVirt 4.3.10 and update CentOS to 7u9. >

[ovirt-users] Re: Q: Node Upgrade Path

2021-07-08 Thread matthew.st...@fujitsu.com
Some of my systems have megaraid sas2 raid controllers, which Red Hat have stopped supporting "under EL8", and all the variants have followed suit. -Original Message----- From: matthew.st...@fujitsu.com Sent: Thursday, July 8, 2021 12:42 PM To: Andrei Verovski ; users@ovirt.o

[ovirt-users] Re: Q: Node Upgrade Path

2021-07-08 Thread matthew.st...@fujitsu.com
If the hardware is old, and won't support EL8, the best option is to update to oVirt 4.3.10 and update CentOS to 7u9. Some of my systems have megaraid sas2 raid controllers, which Red Hat have stopped supporting, and all the variant have followed suit. I have tried the Elrepo DUD's to work

[ovirt-users] Re: Changing the ovirtmgmt IP address

2021-05-10 Thread matthew.st...@fujitsu.com
Found the answer: Update /var/lib/vdsm/persistence/netconf/nets/ovritmgmt and reboot. From: matthew.st...@fujitsu.com Sent: Monday, May 10, 2021 3:18 PM To: users@ovirt.org Subject: [ovirt-users] Changing the ovirtmgmt IP address Version: 4.3.10 I'm attempting to change the IP address

[ovirt-users] Changing the ovirtmgmt IP address

2021-05-10 Thread matthew.st...@fujitsu.com
Version: 4.3.10 I'm attempting to change the IP address, netmask and gateway of the ovirtmgmt NIC of a host, but everytime I reboot the host, the old address/netmask/gateway re-assert themselves. Where do I need to make the changes, so they will be permanent? I've modified

[ovirt-users] Re: hosted-engine /var full

2021-05-09 Thread matthew.st...@fujitsu.com
Appliance hosted-engine on block storage (fc,iscsi). Have you checked that you are not wasting space on the disk itself? When I setup my hosted-engine, I created a 100GB lun, and told the setup routine to make a 85GB disk, which it did, however the appliance only used 30GB of that, leaving

[ovirt-users] Re: Unable to provide network acces to second cluster in DC

2021-04-29 Thread matthew.st...@fujitsu.com
If you assigned the network to the cluster, they should be available in the new VM dialog, once you selected the cluster. -Original Message- From: Miguel Garcia Sent: Thursday, April 29, 2021 1:28 PM To: users@ovirt.org Subject: [ovirt-users] Re: Unable to provide network acces to

[ovirt-users] Re: Unable to provide network acces to second cluster in DC

2021-04-28 Thread matthew.st...@fujitsu.com
Compute > Clusters > "Name" > Logical Network > Manage Networks -Original Message- From: Miguel Garcia Sent: Wednesday, April 28, 2021 12:20 PM To: users@ovirt.org Subject: [ovirt-users] Unable to provide network acces to second cluster in DC I have created the following DC and cluster

[ovirt-users] Re: Ansible ovirt.ovirt_vm nics

2021-04-26 Thread matthew.st...@fujitsu.com
the entry in [virtualmachines:vars] with the value of 2 (default is 1) and then in the other classes, I assigned a value of 3. Now the variable in [class:vars] will override the variables in [virtualmachines:vars]. Of course the host level can still override all. From: matthew.st...@fujitsu.com

[ovirt-users] Re: Attempting to detach a storage domain

2021-04-26 Thread matthew.st...@fujitsu.com
then undeployed it; then patched it; and finally deployed it. Its back up and running and taking VMs, and no more 'Duplicate keys' errors. -Original Message- From: matthew.st...@fujitsu.com Sent: Monday, April 26, 2021 7:18 PM To: Nir Soffer Cc: users@ovirt.org Subject: [ovirt-users

[ovirt-users] Re: Attempting to detach a storage domain

2021-04-26 Thread matthew.st...@fujitsu.com
-Original Message- From: Nir Soffer Sent: Monday, April 26, 2021 5:12 PM To: Stier, Matthew Cc: Benny Zlotnik ; users@ovirt.org Subject: Re: [ovirt-users] Re: Attempting to detach a storage domain On Tue, Apr 27, 2021 at 12:48 AM matthew.st...@fujitsu.com wrote: >

[ovirt-users] Re: Attempting to detach a storage domain

2021-04-26 Thread matthew.st...@fujitsu.com
: [ovirt-users] Attempting to detach a storage domain I think engine.log would be a good place to start, it would likely tell us on which host there's a problem (if there is one) On Sun, Apr 25, 2021 at 10:22 AM matthew.st...@fujitsu.com wrote: > > Which logs, on which hosts should I be l

[ovirt-users] Re: Attempting to detach a storage domain

2021-04-25 Thread matthew.st...@fujitsu.com
] Attempting to detach a storage domain What do the logs say? This usually means that not all hosts were able to disconnect from it On Sun, Apr 25, 2021 at 9:45 AM matthew.st...@fujitsu.com wrote: > > Ovirt: 4.3.10 > > Storage: iSCSI > > > > Problem: Attempting to place storage

[ovirt-users] Attempting to detach a storage domain

2021-04-25 Thread matthew.st...@fujitsu.com
Ovirt: 4.3.10 Storage: iSCSI Problem: Attempting to place storage domain into 'maintenance' in preparation for detachment and destruction, has left it hung in a 'Preparation for maintenance' state. I have three storage domain I need to put into maintenance, detach and delete. When I placed

[ovirt-users] Re: Ansible ovirt.ovirt_vm nics

2021-04-22 Thread matthew.st...@fujitsu.com
ovirt_vm module from oVirt Ansible Collection which contains newer versions than the ovirt_vm module included in Ansible 2.9? https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_vm_module.html Thanks, Martin On Thu, Apr 22, 2021 at 9:28 AM matthew.st...@fujitsu.com

[ovirt-users] Ansible ovirt.ovirt_vm nics

2021-04-22 Thread matthew.st...@fujitsu.com
The 'nics' section of ovirt_vm is vague and with nearly no examples. My playbook is based upon https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-manager-olvm I've made several modifications, (more default) and added a few lines, which I believe is supposed to assign vnic

[ovirt-users] Re: How to detach FC Storage Domain

2021-04-09 Thread matthew.st...@fujitsu.com
If you destroyed, no. To migrate the storage, intact, you need to shutdown the VMs, place the storage domain into maintenance, then detach, and remove the storage domain. And then do an attach on the new DC. I've been doing this iSCSI to migrate VMs from an existing DC to a new DC to

[ovirt-users] Re: Small SAN suggestions?

2021-02-17 Thread matthew.st...@fujitsu.com
Disks + Linux + iSCSI target (Need I say more) -Original Message- From: Chris Adams Sent: Wednesday, February 17, 2021 12:26 PM To: users@ovirt.org Subject: [ovirt-users] Small SAN suggestions? I have an oVirt cluster with a significantly oversized SAN for storage (iSCSI, have 30TB

[ovirt-users] Using VNC console on new cluster

2021-02-11 Thread matthew.st...@fujitsu.com
I'm running OLVM 4.3.6 (Consider it oVIrt 4.3.6). When I created my second cluster, I could not access the hosts on the second cluster using VNC (haven't tried to get html5 working). Since I was forced to power off everything, (power outage), I've had no issue with accessing the console on any

[ovirt-users] Re: Newer kernel for oVirt Node NG

2021-02-09 Thread matthew.st...@fujitsu.com
9, 2021 at 3:42 PM matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> mailto:matthew.st...@fujitsu.com>> wrote: Elrepo.org From: Shantur Rathore mailto:rathor...@gmail.com>> Sent: Tuesday, February 9, 2021 9:28 AM To: users mailto:users@ovirt.org>> Subject: [o

[ovirt-users] Using Ansible ovirt_vm

2021-01-14 Thread matthew.st...@fujitsu.com
Over this weekend, I need to shutdown and restart 1500 VMs while I do work. Modifying an Ansible playbook I have, to accomplish that, seems easy enough. Last weekend I used the web gui and edited each Virtual Machine and changed the 'cluster' to the one I wanted to assign it too. Now I would

[ovirt-users] Re: VM console does not work with new cluster.

2021-01-14 Thread matthew.st...@fujitsu.com
1 ~]# firewall-cmd --list-all public (active) > target: default > icmp-block-inversion: no > interfaces: bond0 ovirtmgmt > sources: > services: cockpit dhcpv6-client libvirt-tls ovirt-imageio ovirt- > vmconsole snmp ssh vdsm > ports: 22/tcp 6081/udp > protocols

[ovirt-users] Re: VM console does not work with new cluster.

2021-01-12 Thread matthew.st...@fujitsu.com
cluster. Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them.. Eric Evans Digital Data Services LLC. 304.660.9080 -Original Message- From: matthew.st...@fujitsu.com

[ovirt-users] Re: VM console does not work with new cluster.

2021-01-12 Thread matthew.st...@fujitsu.com
Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted. -Original Message- From: Strahil Nikolov Sent: Sunday, January 10, 2021 10:57 PM

[ovirt-users] Breaking up a oVirt cluster on storage domain boundary.

2020-12-30 Thread matthew.st...@fujitsu.com
Is it possible to break up an oVirt cluster into multiple clusters? I have an Oracle Linux Virtualization Manager 4.3.6 cluster (think oVirt 4.3.6) that is hosting four different classes of VM's. I have acquired some additional hosts, and instead of adding them to my "default" cluster, I want

[ovirt-users] Re: what difference between enterprise Linux hosts and oVirt Nodes ?

2020-12-07 Thread matthew.st...@fujitsu.com
Nothing much really. It is two ways to get to the same result. Use a CentOS minimal OS install, plus the oVirt packages from the repository. Or an oVirt Node ISO with all of the necessary package included. Patchable and upgradable from the respective repositories. From: tommy Sent: Monday,

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

2020-11-10 Thread matthew.st...@fujitsu.com
Define ‘proxy’ with /etc/yum.conf. From: Simon Coter Sent: Tuesday, November 10, 2020 9:59 AM To: Matteo Bonardi Cc: Strahil Nikolov ; users Subject: [ovirt-users] Re: Deploy oVirt Engine fail behind proxy Hi Matteo, this one is the solution we’ve applied on OLVM that should also work for

[ovirt-users] Re: setting routing rules for guests?

2020-11-10 Thread matthew.st...@fujitsu.com
I had a need for this on one of my clusters. Spun up a VM to host, installed and configured the software. -Original Message- From: yam yam Sent: Tuesday, November 10, 2020 12:08 AM To: users@ovirt.org Subject: [ovirt-users] Re: setting routing rules for guests? Thanks for the reply!

[ovirt-users] Migrate hosted-engine to new storage domain

2020-11-02 Thread matthew.st...@fujitsu.com
I've migrated my iSCSI storage to a new array, and the only thing remaining is to migrate the hosted-engine. Any directions on how I should proceed. I understand that I will need to back-up the existing, create a new hosted-engine on the new storage, specifying the backup a reference. I

[ovirt-users] Re: oVirt 4.3.10 RHEL 7.9 support

2020-10-30 Thread matthew.st...@fujitsu.com
I'm running Oracle Linux Virtualization Manager 4.3.6 (ie oVirt 4.3.6) on Oracle Linux 7u9 with their UEK6 kernel. Only issue was with V2V migration (VMware to OLVM) and that was due to a missing package (qemu-block-curl). [Pulling the missing package from Oracle's developer repository, as

[ovirt-users] Remove VM that failed being built from template

2020-10-21 Thread matthew.st...@fujitsu.com
oVirt 4.3.6 Attempted to build 10 VMs from a template, concurrently, and apparently overloaded the 1GB link to the iSCSI storage. I now have four VMs hung in the Locked connection on the display, and no means to cancel, remove them. The all have 'Failed to complete VM creation.' log

[ovirt-users] Need assistance in migrating between iSCSI arrays.

2020-10-21 Thread matthew.st...@fujitsu.com
To get a project going, I used an iSCSI SAN array of limited storage, while waiting to obtain, and make operational another iSCSI SAN of considerably more storage. I've attached the new iSCSI array to my cluster of hosts, attached a number of LUNs as additional storage domains, and move my

[ovirt-users] Re: CEPH - Opinions and ROI

2020-09-30 Thread matthew.st...@fujitsu.com
If you can’t go direct, how about round about, with an iSCSI gateway. From: Jeremey Wise Sent: Wednesday, September 30, 2020 11:33 PM To: users Subject: [ovirt-users] CEPH - Opinions and ROI I have for many years used gluster because..well. 3 nodes.. and so long as I can pull a drive out..

[ovirt-users] oVirt networking.

2020-09-27 Thread matthew.st...@fujitsu.com
oVirt newbie starting with 4.4.2. Any good documentation on setting up networking? I want to bond my two network interfaces. The native interface will be uses for management. All other traffic will be over tagged vlans. ___ Users mailing list --

[ovirt-users] Re: Populating ISO storage domain

2020-09-26 Thread matthew.st...@fujitsu.com
It is being mounted under /rhev/data-center/mnt/ on the hosts, but is not being self-hosted engine. From: matthew.st...@fujitsu.com Sent: Saturday, September 26, 2020 4:17 PM To: Edward Berger Cc: users@ovirt.org Subject: [ovirt-users] Re: Populating ISO storage domain I setup the folder

[ovirt-users] Re: Populating ISO storage domain

2020-09-26 Thread matthew.st...@fujitsu.com
domain If its in an NFS folder, make sure the ownership is vdsm:kvm (36:36) On Sat, Sep 26, 2020 at 2:57 PM matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> mailto:matthew.st...@fujitsu.com>> wrote: I’ve created and ISO storage domain, and placed ISO’s in the export path do

[ovirt-users] Populating ISO storage domain

2020-09-26 Thread matthew.st...@fujitsu.com
I've created and ISO storage domain, and placed ISO's in the export path do not show up under Storage > Storage Domains > iso > images; nor as available images which creating a new VM. Haven't located method get them noticed. There is a greyed out 'scan disk' option. What is the proper

[ovirt-users] Re: Recreating ISO storage domain

2020-09-26 Thread matthew.st...@fujitsu.com
Got this fixed. Ignore. From: matthew.st...@fujitsu.com Sent: Saturday, September 26, 2020 1:39 PM To: users@ovirt.org Subject: [ovirt-users] Recreating ISO storage domain I have created a three host oVirt cluster using 4.4.2. I created an ISO storage domain to hold my collection of ISO