> On Thu, Jun 8, 2017 at 6:28 AM, Leni Kadali Mutungi
> wrote:
>> I assigned the CentOS VM 3GB of RAM, so that could very well be the
>> problem. So the next step will be to increase the RAM of the VM to 4GB
>> and report back with my findings.
Results of the build. It managed to move on from the
On Thu, Jun 8, 2017 at 6:28 AM, Leni Kadali Mutungi
wrote:
> Results on trying a separate build on a CentOS VM are again a freeze
> at the same point as stated below:
>
> [INFO] weaveinfo Join point 'constructor-execution(void
> com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer.(com.google.gwt.dev.j
Results on trying a separate build on a CentOS VM are again a freeze
at the same point as stated below:
[INFO] weaveinfo Join point 'constructor-execution(void
com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer.(com.google.gwt.dev.jjs.ast.JProgram))'
in Type 'com.google.gwt.dev.jjs.impl.ControlFlowAn
On Wed, Jun 7, 2017 at 3:29 AM, Leni Kadali Mutungi
wrote:
> On 6/6/17, Yedidyah Bar David wrote:
>> On Tue, Jun 6, 2017 at 6:55 AM, Leni Kadali Mutungi
>> wrote:
>> So, did the engine also start successfully?
> Successfully ran
> `/home/user/ovirt_engine/share/ovirt-engine/services/ovirt-engine
On 6/6/17, Yedidyah Bar David wrote:
> On Tue, Jun 6, 2017 at 6:55 AM, Leni Kadali Mutungi
> wrote:
> So, did the engine also start successfully?
Successfully ran
`/home/user/ovirt_engine/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
start`
Unfortunately all I get is the home page. Try
On Tue, Jun 6, 2017 at 6:55 AM, Leni Kadali Mutungi
wrote:
> Setup was successful. Attached is the message I received. I didn't
> mind the firewalld bits since I don't have that installed. However all
> the ovn-* commands didn't work. I tried locating their equivalents,
> thinking that they could
Setup was successful. Attached is the message I received. I didn't
mind the firewalld bits since I don't have that installed. However all
the ovn-* commands didn't work. I tried locating their equivalents,
thinking that they could be in the ovirt_engine folder or something
along those lines. The `s
On Fri, Jun 2, 2017 at 7:07 AM, Leni Kadali Mutungi
wrote:
> On 6/1/17, Leni Kadali Mutungi wrote:
>> On 6/1/17, Yedidyah Bar David wrote:
>>> The message:
>>>
>>> No handlers could be found for logger
>>> "ovirt.engine.ovirt_engine.configfile"
>>>
>>> is ugly, but harmless. It almost always app
On 6/1/17, Yedidyah Bar David wrote:
> The message:
>
> No handlers could be found for logger
> "ovirt.engine.ovirt_engine.configfile"
>
> is ugly, but harmless. It almost always appears in the setup log file.
> You are welcome to open a bug about it, though.
>
> Not sure what's the problem with e
On Wed, May 31, 2017 at 6:17 AM, Leni Kadali Mutungi
wrote:
> On 5/30/17, Leni Kadali Mutungi wrote:
>> Managed to build successfully using a directory in home that the
>> non-root user can write to. However I when I ran the engine-setup, I
>> ran into the issue of specifying a fully qualified do
On 5/30/17, Leni Kadali Mutungi wrote:
> Managed to build successfully using a directory in home that the
> non-root user can write to. However I when I ran the engine-setup, I
> ran into the issue of specifying a fully qualified domain name. I
> tried the possible answers I could think of (hostna
Managed to build successfully using a directory in home that the
non-root user can write to. However I when I ran the engine-setup, I
ran into the issue of specifying a fully qualified domain name. I
tried the possible answers I could think of (hostname.example.com,
127.0.0.1) but they didn't seem
On Mon, May 29, 2017 at 9:32 AM, Yedidyah Bar David wrote:
> On Mon, May 29, 2017 at 6:52 AM, Leni Kadali Mutungi
> wrote:
>> I have read what is in the README.adoc and done all of it.
>> Unfortunately, even with BUILD_ALL_USER_AGENTS=0, my computer would
>> still freeze. I had to opt to not buil
On Mon, May 29, 2017 at 6:52 AM, Leni Kadali Mutungi
wrote:
> I have read what is in the README.adoc and done all of it.
> Unfortunately, even with BUILD_ALL_USER_AGENTS=0, my computer would
> still freeze. I had to opt to not build the gwt ui instead. I hope
> it's not too important :P.
It is, e
I have read what is in the README.adoc and done all of it.
Unfortunately, even with BUILD_ALL_USER_AGENTS=0, my computer would
still freeze. I had to opt to not build the gwt ui instead. I hope
it's not too important :P.
Build went on fine. Ran into this issue:
install: cannot create regular file
I have forgotten that you are doing it in debian. Maybe in case of debian
the error can there for some other reason so I leave it for others to
answer. But one more thing you can try is to decrease your swappiness value
to 10. If you have enough ram then this will at least make your system
freeze
On 5/25/17, shubham dubey wrote:
> Hi,
> I got the same problem once and it seems to be related to memory.
> So first thing is make sure you have at least 4 gb of ram because thats the
> minimum requirement for ovirt-engine to run.
> If with 4gb+ ram you still getting error like this then you must
On 5/25/17, Yedidyah Bar David wrote:
> On Thu, May 25, 2017 at 6:05 AM, Leni Kadali Mutungi
> wrote:
>> Ran `make clean install-dev` and the process freezes at:
>> [INFO] weaveinfo Join point 'constructor-execution(void
>> com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer.(com.google.gwt.dev.jjs.a
Hi,
I got the same problem once and it seems to be related to memory.
So first thing is make sure you have at least 4 gb of ram because thats the
minimum requirement for ovirt-engine to run.
If with 4gb+ ram you still getting error like this then you must have no
swap
memory turn on. In that case c
On Thu, May 25, 2017 at 6:05 AM, Leni Kadali Mutungi
wrote:
> Ran `make clean install-dev` and the process freezes at:
> [INFO] weaveinfo Join point 'constructor-execution(void
> com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer.(com.google.gwt.dev.jjs.ast.JProgram))'
> in Type 'com.google.gwt.dev.j
Ran `make clean install-dev` and the process freezes at:
[INFO] weaveinfo Join point 'constructor-execution(void
com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer.(com.google.gwt.dev.jjs.ast.JProgram))'
in Type 'com.google.gwt.dev.jjs.impl.ControlFlowAnalyzer'
(ControlFlowAnalyzer.java:905) advised b
21 matches
Mail list logo