[ovirt-users] HE multipath problem.

2016-02-03 Thread gflwqs gflwqs
Hi List, I have installed the hosted engine over iscsi but have a problem getting it to install over the multipath, even though i can see the multipath device from the host with multipath -ll. When i get to the point in the HE installer where i should choose the disk i only see the underlying

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread Elad Ben Aharon
Hi, Deployment over more than one path is currently not supported. There is a request for it: https://bugzilla.redhat.com/show_bug.cgi?id=1193961 I can't think of a way for manually change to dual paths and keep the VM running without interruptions. Adding Simone and Nir who might have an idea.

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread Elad Ben Aharon
The scenario of manually connecting the hosted-engine host to several paths wasn't tested before, but by theory it should work. As you said, the host should be set to global maintenance, disconnected from the single iSCSI session [1] and reconnected to the dual paths [2]. Then host re-activation.

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread Elad Ben Aharon
Yes, you're right. # The following are used only for iSCSI storage iqn= portal= user= password= port= Simone, what do you think, will it be possible to add targets in hosted-engine.conf as a workaround? On Wed, Feb 3, 2016 at 2:46 PM, gflwqs gflwqs wrote: > Yes but i have

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread gflwqs gflwqs
Yes but i have to change the config for the HE in /etc/ovirt-hosted-engine/hosted-engine.conf so how should that look like? There is only one variable for storage and since there is dual pathing there is 2 ip:s so is there some other config for multipathing? storage=x.x.x.x 2016-02-03 13:17

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread gflwqs gflwqs
So does that mean i can change it if i put the HE into global maintenance and restart it? If that is possible then it is ok for me? /Christian 2016-02-03 11:07 GMT+01:00 Elad Ben Aharon : > Hi, > > Deployment over more than one path is currently not supported. There is a >

Re: [ovirt-users] HE multipath problem.

2016-02-03 Thread Simone Tiraboschi
On Wed, Feb 3, 2016 at 1:54 PM, Elad Ben Aharon wrote: > Yes, you're right. > > # The following are used only for iSCSI storage > iqn= > portal= > user= > password= > port= > > > Simone, what do you think, will it be possible to add targets in > hosted-engine.conf as a