Re: [ovirt-users] Ovirt 4.0 spice console attempting to connect to HV private IP

2016-12-16 Thread Edward Clay 
We just found the issue.  In the cluster logical networks it has a
display network that was pointing to the management netowrk(private not
accessible network).

system > data center > cluster > logical networks tab

I changed the display network to the public network. Now I'm able to
access the console on new vms.  That is after I restart them.

Thanks for taking some time to respond.


On 12/16/2016 12:51 PM, Michal Skrivanek wrote:
>> On 16 Dec 2016, at 19:57, Edward Clay  wrote:
>>
>> Hello,
>>
>> I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
>> that I'm not finding an explanation or solution to.  Currently when I
>> create a new VM and start it up and attempt to connect to the console I
>> get the following error.
>>
>> "Unable to connect to the graphic server Could not connect to 10.1.1.1:
>> Socket I/O timed out"
>>
>> If I attempt to launch a console for a VM created before the upgrade it
>> opens successfully. If I save the console.vv file I can see that the HV
>> public IP address is in this file.  If I do the same thing for the
>> failing vm and I see the HV private mgmnt network IP.  I'm not finding
>> where I can change which IP is used for console access or a difference
>> in how the VMs created before the upgrade are configured compared to the
>> new VMs.
>>
>> I should also note that I attempted to change the IP in the failing VMs
>> console.vv file and then use it with the remove-viewer spice client and
>> it fails to connect to the port.
>>
>> Any guidance on how to identify what's wrong is greatly appreciated.
> Hi,
> I wonder if you have anything special around resolving the hosts. Do
> you use names in engine? Are both engine and hosts using same dns? How
> does host's networking look like? What IP is the qemu procces bind to?
>
> You can also try to use Display IP Override in Host dialog
>
>
> Thanks,
> michal
>> --
>> Best regards,
>> Edward Clay
>> Systems Administrator
>> UK2 Group - US Operations
>> Phone: 1-800-222-2165
>> FAX: 435-755-3449
>> E-mail: edward.c...@uk2group.com
>>
>> Believe in Better Hosting
>> http://www.westhost.com
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>

-- 
Best regards,
Edward Clay
Systems Administrator
UK2 Group - US Operations
Phone: 1-800-222-2165
FAX: 435-755-3449
E-mail: edward.c...@uk2group.com
 
Believe in Better Hosting
http://www.westhost.com

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt 4.0 spice console attempting to connect to HV private IP

2016-12-16 Thread Cameron Christensen 
For the cluster that the VM is in check the logical networks and make sure
that the role display is set on the proper network interface.


On Fri, Dec 16, 2016 at 11:51 AM, Michal Skrivanek 
wrote:

> > On 16 Dec 2016, at 19:57, Edward Clay  wrote:
> >
> > Hello,
> >
> > I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
> > that I'm not finding an explanation or solution to.  Currently when I
> > create a new VM and start it up and attempt to connect to the console I
> > get the following error.
> >
> > "Unable to connect to the graphic server Could not connect to 10.1.1.1:
> > Socket I/O timed out"
> >
> > If I attempt to launch a console for a VM created before the upgrade it
> > opens successfully. If I save the console.vv file I can see that the HV
> > public IP address is in this file.  If I do the same thing for the
> > failing vm and I see the HV private mgmnt network IP.  I'm not finding
> > where I can change which IP is used for console access or a difference
> > in how the VMs created before the upgrade are configured compared to the
> > new VMs.
> >
> > I should also note that I attempted to change the IP in the failing VMs
> > console.vv file and then use it with the remove-viewer spice client and
> > it fails to connect to the port.
> >
> > Any guidance on how to identify what's wrong is greatly appreciated.
>
> Hi,
> I wonder if you have anything special around resolving the hosts. Do
> you use names in engine? Are both engine and hosts using same dns? How
> does host's networking look like? What IP is the qemu procces bind to?
>
> You can also try to use Display IP Override in Host dialog
>
>
> Thanks,
> michal
> >
> > --
> > Best regards,
> > Edward Clay
> > Systems Administrator
> > UK2 Group - US Operations
> > Phone: 1-800-222-2165
> > FAX: 435-755-3449
> > E-mail: edward.c...@uk2group.com
> >
> > Believe in Better Hosting
> > http://www.westhost.com
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Regards,

Cameron Christensen
Manager, Security and Infrastructure
UK2 Group
Phone: 1-800-222-2165
E-mail: cameron.christen...@uk2group.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt 4.0 spice console attempting to connect to HV private IP

2016-12-16 Thread Michal Skrivanek 
> On 16 Dec 2016, at 19:57, Edward Clay  wrote:
>
> Hello,
>
> I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
> that I'm not finding an explanation or solution to.  Currently when I
> create a new VM and start it up and attempt to connect to the console I
> get the following error.
>
> "Unable to connect to the graphic server Could not connect to 10.1.1.1:
> Socket I/O timed out"
>
> If I attempt to launch a console for a VM created before the upgrade it
> opens successfully. If I save the console.vv file I can see that the HV
> public IP address is in this file.  If I do the same thing for the
> failing vm and I see the HV private mgmnt network IP.  I'm not finding
> where I can change which IP is used for console access or a difference
> in how the VMs created before the upgrade are configured compared to the
> new VMs.
>
> I should also note that I attempted to change the IP in the failing VMs
> console.vv file and then use it with the remove-viewer spice client and
> it fails to connect to the port.
>
> Any guidance on how to identify what's wrong is greatly appreciated.

Hi,
I wonder if you have anything special around resolving the hosts. Do
you use names in engine? Are both engine and hosts using same dns? How
does host's networking look like? What IP is the qemu procces bind to?

You can also try to use Display IP Override in Host dialog


Thanks,
michal
>
> --
> Best regards,
> Edward Clay
> Systems Administrator
> UK2 Group - US Operations
> Phone: 1-800-222-2165
> FAX: 435-755-3449
> E-mail: edward.c...@uk2group.com
>
> Believe in Better Hosting
> http://www.westhost.com
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Ovirt 4.0 spice console attempting to connect to HV private IP

2016-12-16 Thread Edward Clay 
Hello,

I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
that I'm not finding an explanation or solution to.  Currently when I
create a new VM and start it up and attempt to connect to the console I
get the following error.

"Unable to connect to the graphic server Could not connect to 10.1.1.1:
Socket I/O timed out"

If I attempt to launch a console for a VM created before the upgrade it
opens successfully. If I save the console.vv file I can see that the HV
public IP address is in this file.  If I do the same thing for the
failing vm and I see the HV private mgmnt network IP.  I'm not finding
where I can change which IP is used for console access or a difference
in how the VMs created before the upgrade are configured compared to the
new VMs.

I should also note that I attempted to change the IP in the failing VMs
console.vv file and then use it with the remove-viewer spice client and
it fails to connect to the port.

Any guidance on how to identify what's wrong is greatly appreciated.

-- 
Best regards,
Edward Clay
Systems Administrator
UK2 Group - US Operations
Phone: 1-800-222-2165
FAX: 435-755-3449
E-mail: edward.c...@uk2group.com
 
Believe in Better Hosting
http://www.westhost.com

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users