Re: [ovirt-users] Problem to login virtengine on remote browser
On Thu, Nov 9, 2017 at 5:38 PM, Stephen Liu wrote: >> What do you mean by that? What error message do you get? >> Can you ssh from the engine machine to this address manually? >> If not, first solve this, then try again to add it. >> Perhaps it's the firewall blocking or something like that. > > Status - Install Failed > Nov 9, 2017 7:01:44 PM > Host ovirtnode.example.com installation failed. Command returned failure > code 1 during SSH session 'root@192.168.8.5'. > > Nov 9, 2017 7:01:43 PM > Failed to install Host ovirtnode.example.com. Failed to execute stage 'Setup > validation': Hardware does not support virtualization. OK. So it can be connected, but fails later on. > > Nov 9, 2017 7:01:43 PM > Host ovirtnode.example.com installation in progress . Machine does not > support constant timestamp counter, this may effect performance. Perhaps you want to check that too, but can be done later. > > > On Host Terminal: > $ ssh root@192.168.8.5 (ovirt node IP) > The authenticity of host '192.168.8.5 (192.168.8.5)' can't be established. > ECDSA key fingerprint is SHA256:J2gMI1fvZj5dNC36YClUjAGHQrnszQ23y46xjNcJnYw. > Are you sure you want to continue connecting (yes/no)? > > Whether I have to proceed here first, connecting "ovirt note"? > > $ egrep -c '(vmx|svm)' /proc/cpuinfo > 8 > > $ uname -m > x86_64 > > $ kvm-ok > INFO: /dev/kvm exists > KVM acceleration can be used Please check/share the host-deploy log. You can find it on the engine machine, under /var/log/ovirt-engine/host-deploy. Search there for 'Hardware does not support virtualization' and look at the checks before that line. Or just upload the file somewhere and share a link. Thanks, > > Regards > SL > > > > > > On Thursday, November 9, 2017, 11:18:06 PM GMT+8, Yedidyah Bar David > wrote: > > > On Thu, Nov 9, 2017 at 5:03 PM, Stephen Liu wrote: if running; 192.168.8.8 (IP of vm1) I can connect 'oVirt Open Virtualization Manager' but I can't login with following warning: 'The client is not authorized to request an authorization. It's required to access the system using FQDN.' >> >>> Indeed, see the other thread. >> >>> If this isn't enough, please provide more details - the name you provided >>> as engine FQDN during engine-setup, whether you fixed name resolution - >>> by updating the dns or the hosts file, etc. >> >> Hi, >> >> I solved the problem with following steps:- >> >> # nano /etc/ovirt-engine/engine.conf.d/11-setup-sso.conf >> >> Change: >> SSO_ALTERNATE_ENGINE_FQDNS="" >> To: >> SSO_ALTERNATE_ENGINE_FQDNS="192.168.8.8" (ovirtengine IP) >> >> # systemctl restart ovirt-engine.service >> >> Now I can remote login ovirtengine on Host's browser running: >> http://ovirtengine.example.com >> >> On ovirtengine >> $ cat /etc/hosts >> 127.0.0.1 localhost localhost.localdomain localhost4 >> localhost4.localdomain4 >> ::1localhost localhost.localdomain localhost6 >> localhost6.localdomain6 >> >> 192.168.8.8 ovirtengine.example.com >> 192.168.8.5 ovirtnode.example.com >> [/end] >> >> Now I encounter another problem in "Add oVirt Node (ovirtnode.example) to >> ovirt engine from Web Administrator Portal", failure to add new host >> "ovirt >> node". >> >> To connect/login "ovirt node" on Host I must run; >> 192.168.8.5:9090 >> >> Adding 192.168.8.5 to the new host, "ovirt node" can't be connected. > > What do you mean by that? What error message do you get? > Can you ssh from the engine machine to this address manually? > If not, first solve this, then try again to add it. > Perhaps it's the firewall blocking or something like that. > > >> But >> I'm not allowed adding "192.168.8.5:9090" to Address there. >> >> Please advise is there any solution to delete ":9090"? >> >> Thanks >> >> Regards >> SL >> >> >> On Thursday, November 9, 2017, 8:34:30 PM GMT+8, Yedidyah Bar David >> wrote: >> >> >> On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu wrote: >>> Hi all, >>> >>> Problem to login virtengine on remote browser >>> client is not authorized to request an authorization >> >> Please check recent thread on this list, with subject "[ovirt-users] >> engine FQDN". >> >>> >>> vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) >>> vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) >>> Host - Ubuntu 16.04 Gnome desktop >>> KVM >>> >>> vm1 >>> === >>> on Firefox running; >>> ovirtengine.example.com >>> I can login 'oVirt Open Virtualization Manager' >>> >>> on Firefox running; >>> 192.168.8.5:9090 (ovirt node IP) >>> I can login ovirt node as root >>> >>> Host >>> >>> on Firefox running; >>> ovirtengine.example.com >>> Server not found >>> (Firewall of vm1 already stopped running; >>> # systemctl stop firewalld ) >> >> "Server not found" is usually unrelated to the firewall, but is a result >> of bad/missing name resolution. >> >>> >>> if running; >>> 192.168.8.8 (IP of vm1) >>> I can connect 'oVirt Open Virtualization Manager' but I can't login with >>> following warning: >>> '
Re: [ovirt-users] Problem to login virtengine on remote browser
> What do you mean by that? What error message do you get? > Can you ssh from the engine machine to this address manually? > If not, first solve this, then try again to add it. > Perhaps it's the firewall blocking or something like that. Status - Install Failed Nov 9, 2017 7:01:44 PM Host ovirtnode.example.com installation failed. Command returned failure code 1 during SSH session 'root@192.168.8.5'. Nov 9, 2017 7:01:43 PM Failed to install Host ovirtnode.example.com. Failed to execute stage 'Setup validation': Hardware does not support virtualization. Nov 9, 2017 7:01:43 PM Host ovirtnode.example.com installation in progress . Machine does not support constant timestamp counter, this may effect performance. On Host Terminal: $ ssh root@192.168.8.5 (ovirt node IP) The authenticity of host '192.168.8.5 (192.168.8.5)' can't be established. ECDSA key fingerprint is SHA256:J2gMI1fvZj5dNC36YClUjAGHQrnszQ23y46xjNcJnYw. Are you sure you want to continue connecting (yes/no)? Whether I have to proceed here first, connecting "ovirt note"? $ egrep -c '(vmx|svm)' /proc/cpuinfo 8 $ uname -m x86_64 $ kvm-ok INFO: /dev/kvm existsKVM acceleration can be used RegardsSL On Thursday, November 9, 2017, 11:18:06 PM GMT+8, Yedidyah Bar David wrote: On Thu, Nov 9, 2017 at 5:03 PM, Stephen Liu wrote: >>> if running; >>> 192.168.8.8 (IP of vm1) >>> I can connect 'oVirt Open Virtualization Manager' but I can't login with >>> following warning: >>>'The client is not authorized to request an authorization. It's required >>> to >>>access the system using FQDN.' > >> Indeed, see the other thread. > >> If this isn't enough, please provide more details - the name you provided >> as engine FQDN during engine-setup, whether you fixed name resolution - >> by updating the dns or the hosts file, etc. > > Hi, > > I solved the problem with following steps:- > > # nano /etc/ovirt-engine/engine.conf.d/11-setup-sso.conf > > Change: > SSO_ALTERNATE_ENGINE_FQDNS="" > To: > SSO_ALTERNATE_ENGINE_FQDNS="192.168.8.8" (ovirtengine IP) > > # systemctl restart ovirt-engine.service > > Now I can remote login ovirtengine on Host's browser running: > http://ovirtengine.example.com > > On ovirtengine > $ cat /etc/hosts > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > > 192.168.8.8 ovirtengine.example.com > 192.168.8.5 ovirtnode.example.com > [/end] > > Now I encounter another problem in "Add oVirt Node (ovirtnode.example) to > ovirt engine from Web Administrator Portal", failure to add new host "ovirt > node". > > To connect/login "ovirt node" on Host I must run; > 192.168.8.5:9090 > > Adding 192.168.8.5 to the new host, "ovirt node" can't be connected. What do you mean by that? What error message do you get? Can you ssh from the engine machine to this address manually? If not, first solve this, then try again to add it. Perhaps it's the firewall blocking or something like that. > But > I'm not allowed adding "192.168.8.5:9090" to Address there. > > Please advise is there any solution to delete ":9090"? > > Thanks > > Regards > SL > > > On Thursday, November 9, 2017, 8:34:30 PM GMT+8, Yedidyah Bar David > wrote: > > > On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu wrote: >> Hi all, >> >> Problem to login virtengine on remote browser >> client is not authorized to request an authorization > > Please check recent thread on this list, with subject "[ovirt-users] > engine FQDN". > >> >> vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) >> vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) >> Host - Ubuntu 16.04 Gnome desktop >> KVM >> >> vm1 >> === >> on Firefox running; >> ovirtengine.example.com >> I can login 'oVirt Open Virtualization Manager' >> >> on Firefox running; >> 192.168.8.5:9090 (ovirt node IP) >> I can login ovirt node as root >> >> Host >> >> on Firefox running; >> ovirtengine.example.com >> Server not found >> (Firewall of vm1 already stopped running; >> # systemctl stop firewalld ) > > "Server not found" is usually unrelated to the firewall, but is a result > of bad/missing name resolution. > >> >> if running; >> 192.168.8.8 (IP of vm1) >> I can connect 'oVirt Open Virtualization Manager' but I can't login with >> following warning: >> 'The client is not authorized to request an authorization. It's required >> to >> access the system using FQDN.' > > Indeed, see the other thread. > > If this isn't enough, please provide more details - the name you provided > as engine FQDN during engine-setup, whether you fixed name resolution - > by updating the dns or the hosts file, etc. > > Regards, > > >> >> on Firefox running; >> 192.168.8.5:9090 (ovirt node IP) >> I can login ovirt node as root >> >> >> Please help. Thanks in advice. >> >> >> Regards >> SL > >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http:/
Re: [ovirt-users] Problem to login virtengine on remote browser
On Thu, Nov 9, 2017 at 5:03 PM, Stephen Liu wrote: >>> if running; >>> 192.168.8.8 (IP of vm1) >>> I can connect 'oVirt Open Virtualization Manager' but I can't login with >>> following warning: >>>'The client is not authorized to request an authorization. It's required >>> to >>>access the system using FQDN.' > >> Indeed, see the other thread. > >> If this isn't enough, please provide more details - the name you provided >> as engine FQDN during engine-setup, whether you fixed name resolution - >> by updating the dns or the hosts file, etc. > > Hi, > > I solved the problem with following steps:- > > # nano /etc/ovirt-engine/engine.conf.d/11-setup-sso.conf > > Change: > SSO_ALTERNATE_ENGINE_FQDNS="" > To: > SSO_ALTERNATE_ENGINE_FQDNS="192.168.8.8" (ovirtengine IP) > > # systemctl restart ovirt-engine.service > > Now I can remote login ovirtengine on Host's browser running: > http://ovirtengine.example.com > > On ovirtengine > $ cat /etc/hosts > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > > 192.168.8.8 ovirtengine.example.com > 192.168.8.5 ovirtnode.example.com > [/end] > > Now I encounter another problem in "Add oVirt Node (ovirtnode.example) to > ovirt engine from Web Administrator Portal", failure to add new host "ovirt > node". > > To connect/login "ovirt node" on Host I must run; > 192.168.8.5:9090 > > Adding 192.168.8.5 to the new host, "ovirt node" can't be connected. What do you mean by that? What error message do you get? Can you ssh from the engine machine to this address manually? If not, first solve this, then try again to add it. Perhaps it's the firewall blocking or something like that. > But > I'm not allowed adding "192.168.8.5:9090" to Address there. > > Please advise is there any solution to delete ":9090"? > > Thanks > > Regards > SL > > > On Thursday, November 9, 2017, 8:34:30 PM GMT+8, Yedidyah Bar David > wrote: > > > On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu wrote: >> Hi all, >> >> Problem to login virtengine on remote browser >> client is not authorized to request an authorization > > Please check recent thread on this list, with subject "[ovirt-users] > engine FQDN". > >> >> vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) >> vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) >> Host - Ubuntu 16.04 Gnome desktop >> KVM >> >> vm1 >> === >> on Firefox running; >> ovirtengine.example.com >> I can login 'oVirt Open Virtualization Manager' >> >> on Firefox running; >> 192.168.8.5:9090 (ovirt node IP) >> I can login ovirt node as root >> >> Host >> >> on Firefox running; >> ovirtengine.example.com >> Server not found >> (Firewall of vm1 already stopped running; >> # systemctl stop firewalld ) > > "Server not found" is usually unrelated to the firewall, but is a result > of bad/missing name resolution. > >> >> if running; >> 192.168.8.8 (IP of vm1) >> I can connect 'oVirt Open Virtualization Manager' but I can't login with >> following warning: >> 'The client is not authorized to request an authorization. It's required >> to >> access the system using FQDN.' > > Indeed, see the other thread. > > If this isn't enough, please provide more details - the name you provided > as engine FQDN during engine-setup, whether you fixed name resolution - > by updating the dns or the hosts file, etc. > > Regards, > > >> >> on Firefox running; >> 192.168.8.5:9090 (ovirt node IP) >> I can login ovirt node as root >> >> >> Please help. Thanks in advice. >> >> >> Regards >> SL > >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > > > -- > Didi > -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem to login virtengine on remote browser
>> if running; >> 192.168.8.8 (IP of vm1) >> I can connect 'oVirt Open Virtualization Manager' but I can't login with >> following warning: >>'The client is not authorized to request an authorization. It's required to >>access the system using FQDN.' > Indeed, see the other thread. > If this isn't enough, please provide more details - the name you provided > as engine FQDN during engine-setup, whether you fixed name resolution - > by updating the dns or the hosts file, etc. Hi, I solved the problem with following steps:- # nano /etc/ovirt-engine/engine.conf.d/11-setup-sso.conf Change:SSO_ALTERNATE_ENGINE_FQDNS="" To: SSO_ALTERNATE_ENGINE_FQDNS="192.168.8.8" (ovirtengine IP) # systemctl restart ovirt-engine.service Now I can remote login ovirtengine on Host's browser running:http://ovirtengine.example.com On ovirtengine$ cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.8.8 ovirtengine.example.com 192.168.8.5 ovirtnode.example.com [/end] Now I encounter another problem in "Add oVirt Node (ovirtnode.example) to ovirt engine from Web Administrator Portal", failure to add new host "ovirt node". To connect/login "ovirt node" on Host I must run;192.168.8.5:9090 Adding 192.168.8.5 to the new host, "ovirt node" can't be connected. But I'm not allowed adding "192.168.8.5:9090" to Address there. Please advise is there any solution to delete ":9090"? Thanks RegardsSL On Thursday, November 9, 2017, 8:34:30 PM GMT+8, Yedidyah Bar David wrote: On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu wrote: > Hi all, > > Problem to login virtengine on remote browser > client is not authorized to request an authorization Please check recent thread on this list, with subject "[ovirt-users] engine FQDN". > > vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) > vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) > Host - Ubuntu 16.04 Gnome desktop > KVM > > vm1 > === > on Firefox running; > ovirtengine.example.com > I can login 'oVirt Open Virtualization Manager' > > on Firefox running; > 192.168.8.5:9090 (ovirt node IP) > I can login ovirt node as root > > Host > > on Firefox running; > ovirtengine.example.com > Server not found > (Firewall of vm1 already stopped running; > # systemctl stop firewalld ) "Server not found" is usually unrelated to the firewall, but is a result of bad/missing name resolution. > > if running; > 192.168.8.8 (IP of vm1) > I can connect 'oVirt Open Virtualization Manager' but I can't login with > following warning: > 'The client is not authorized to request an authorization. It's required to > access the system using FQDN.' Indeed, see the other thread. If this isn't enough, please provide more details - the name you provided as engine FQDN during engine-setup, whether you fixed name resolution - by updating the dns or the hosts file, etc. Regards, > > on Firefox running; > 192.168.8.5:9090 (ovirt node IP) > I can login ovirt node as root > > > Please help. Thanks in advice. > > > Regards > SL > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem to login virtengine on remote browser
On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu wrote: > Hi all, > > Problem to login virtengine on remote browser > client is not authorized to request an authorization Please check recent thread on this list, with subject "[ovirt-users] engine FQDN". > > vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) > vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) > Host - Ubuntu 16.04 Gnome desktop > KVM > > vm1 > === > on Firefox running; > ovirtengine.example.com > I can login 'oVirt Open Virtualization Manager' > > on Firefox running; > 192.168.8.5:9090 (ovirt node IP) > I can login ovirt node as root > > Host > > on Firefox running; > ovirtengine.example.com > Server not found > (Firewall of vm1 already stopped running; > # systemctl stop firewalld ) "Server not found" is usually unrelated to the firewall, but is a result of bad/missing name resolution. > > if running; > 192.168.8.8 (IP of vm1) > I can connect 'oVirt Open Virtualization Manager' but I can't login with > following warning: > 'The client is not authorized to request an authorization. It's required to > access the system using FQDN.' Indeed, see the other thread. If this isn't enough, please provide more details - the name you provided as engine FQDN during engine-setup, whether you fixed name resolution - by updating the dns or the hosts file, etc. Regards, > > on Firefox running; > 192.168.8.5:9090 (ovirt node IP) > I can login ovirt node as root > > > Please help. Thanks in advice. > > > Regards > SL > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Problem to login virtengine on remote browser
Hi all, Problem to login virtengine on remote browser client is not authorized to request an authorization vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) Host - Ubuntu 16.04 Gnome desktop KVM vm1 === on Firefox running; ovirtengine.example.com I can login 'oVirt Open Virtualization Manager' on Firefox running; 192.168.8.5:9090 (ovirt node IP) I can login ovirt node as root Host on Firefox running; ovirtengine.example.com Server not found (Firewall of vm1 already stopped running; # systemctl stop firewalld ) if running; 192.168.8.8 (IP of vm1) I can connect 'oVirt Open Virtualization Manager' but I can't login with following warning: 'The client is not authorized to request an authorization. It's required to access the system using FQDN.' on Firefox running; 192.168.8.5:9090 (ovirt node IP) I can login ovirt node as root Please help. Thanks in advice. Regards SL ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
