Re: [ovirt-users] oVirt Power Management with Cisco UCS C220 M4S

2017-05-21 Thread Mahdi Adnan 
Thank you very much, i've been searching for this for so long.


--

Respectfully
Mahdi A. Mahdi


From: users-boun...@ovirt.org <users-boun...@ovirt.org> on behalf of Abi 
Askushi <rightkickt...@gmail.com>
Sent: Saturday, May 20, 2017 4:14:46 PM
To: users
Subject: [ovirt-users] oVirt Power Management with Cisco UCS C220 M4S

Hi All,

For anyone that might stumble on a Cisco UCS C220 M4S and wondering how to 
configure power management. below are the steps to configure it, as it took me 
some hours to figure it out...

1. enable IPMI on server. (Cisco has this documented)

2. at ovirt GUI, edit host -> power management, then select "ipmilan" and add 
lanplus=1 as an option. (the bold one was the tricky part)

To test from command line:
 ipmitool -I lanplus -H  -U admin -P somepass -v chassis power status
It will give the response: "Chassis Power is on"

Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Power Management with Cisco UCS C220 M4S

2017-05-20 Thread Abi Askushi 
Hi All,

For anyone that might stumble on a Cisco UCS C220 M4S and wondering how to
configure power management. below are the steps to configure it, as it took
me some hours to figure it out...

1. enable IPMI on server. (Cisco has this documented)

2. at ovirt GUI, edit host -> power management, then select "ipmilan" and
add *lanplus=1* as an option. (the bold one was the tricky part)

To test from command line:
 ipmitool -I lanplus -H  -U admin -P somepass -v chassis power
status
It will give the response: "Chassis Power is on"

Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users