subject:"\\\\\\\[ovirt\\\\\\\-users\\\\\\\] Network configuration validation error"

Re: [ovirt-users] Network configuration validation error

2018-02-13 Thread Michael Burman

Thanks for the input,

It's weird that you see this bug
https://bugzilla.redhat.com/show_bug.cgi?id=1528906 on 4.2.1.6 because it
was already tested and verified on 4.2.1.1
I will check this again..

On Tue, Feb 13, 2018 at 3:09 PM,  wrote:

>
> I did not see I had to enable another repo to get this update, so I was
> sure I had the latest version available !
> After adding it, things went a lot better and I was able to update the
> engine and all the nodes flawlessly to version 4.2.1.6-1.el7.centos
> Thanks a lot for your help !
>
> The "no default route error" has disappeared indeed.
>
> But I still couldn't validate network setup modifications on one node as I
> still had the following error in the GUI :
>
>- must match "^b((25[0-5]|2[0-4]d|[01]dd|d?d)_){3}(25[0-5]|2[0-4]d|[01]
>dd|d?d)"
>- Attribute: ipConfiguration.iPv4Addresses[0].gateway
>
> So I tried a dummy thing : I put a value in the gateway field for the NIC
> which doesn't need one (NFS), was able to validate. Then I edited it again,
> removed the value and was able to validate again !
>
> Regards
>
>
> Le 12-Feb-2018 10:42:30 +0100, mbur...@redhat.com a écrit:
>
> "no default route" bug was fixed only on 4.2.1
> Your current version doesn't have the fix
>
> On Mon, Feb 12, 2018 at 11:09 AM,  wrote:
>
>>
>>
>>
>>
>> Le 12-Feb-2018 08:06:43 +0100, jbe...@redhat.com a écrit:
>>
>> > This option relevant only for the upgrade from 3.6 to 4.0(engine had
>> > different OS major versions), it all other cases the upgrade flow very
>> > similar to upgrade flow of standard engine environment.
>> >
>> >
>> > 1. Put hosted-engine environment to GlobalMaintenance(you can do it via
>> > UI)
>> > 2. Update engine packages(# yum update -y)
>> > 3. Run engine-setup
>> > 4. Disable GlobalMaintenance
>> >
>>
>>
>> So I followed these steps connected in the engine VM and didn't get any
>> error message. But the version showed in the GUI is
>> still 4.2.0.2-1.el7.centos. Yum had no newer packages to install. And I
>> still have the "no default route" and network validation problems.
>> Regards
>>
>> > Could someone explain me at least what "Cluster PROD is at version 4.2
>> which
>> > is not supported by this upgrade flow. Please fix it before upgrading."
>> > means ? As far as I know 4.2 is the most recent branch available, isn't
>> it ?
>>
>> I have no idea where did you get
>>
>> "Cluster PROD is at version 4.2 which is not supported by this upgrade
>> flow. Please fix it before upgrading."
>>
>> Please do not cut output and provide exact one.
>>
>> IIUC you should do 'yum update ovirt*setup*' and then 'engine-setup'
>> and only after it would finish successfully you would do 'yum -y update'.
>> Maybe that's your problem?
>>
>> Jiri
>>
>> --
>> FreeMail powered by mail.fr
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> 
>
> mbur...@redhat.comM: 0545355725 IM: mburman
>
>
>
> --
> FreeMail powered by mail.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat



mbur...@redhat.comM: 0545355725 IM: mburman

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-13 Thread spfma . tech

I did not see I had to enable another repo to get this update, so I was sure I 
had the latest version available !
 After adding it, things went a lot better and I was able to update the engine 
and all the nodes flawlessly to version 4.2.1.6-1.el7.centos Thanks a lot for 
your help !   The "no default route error" has disappeared indeed.   But I 
still couldn't validate network setup modifications on one node as I still had 
the following error in the GUI :  

* must match 
"^b((25[0-5]|2[0-4]d|[01]dd|d?d)_){3}(25[0-5]|2[0-4]d|[01]dd|d?d)"
* Attribute: ipConfiguration.iPv4Addresses[0].gateway

 So I tried a dummy thing : I put a value in the gateway field for the NIC 
which doesn't need one (NFS), was able to validate. Then I edited it again, 
removed the value and was able to validate again !Regards 

 Le 12-Feb-2018 10:42:30 +0100, mbur...@redhat.com a crit: 
  "no default route" bug was fixed only on 4.2.1 Your current version doesn't 
have the fix 
 On Mon, Feb 12, 2018 at 11:09 AM,  wrote:

 Le 12-Feb-2018 08:06:43 +0100, jbe...@redhat.com a crit: 
> This option relevant only for the upgrade from 3.6 to 4.0(engine had
 > different OS major versions), it all other cases the upgrade flow very
 > similar to upgrade flow of standard engine environment.
 > 
 > 
 > 1. Put hosted-engine environment to GlobalMaintenance(you can do it via
 > UI)
 > 2. Update engine packages(# yum update -y)
 > 3. Run engine-setup
 > 4. Disable GlobalMaintenance
 >   So I followed these steps connected in the engine VM and didn't get any 
 > error message. But the version showed in the GUI is  still 
 > 4.2.0.2-1.el7.centos. Yum had no newer packages to install. And I still have 
 > the "no default route" and network validation problems. Regards   
 > Could someone explain me at least what "Cluster PROD is at version 4.2 which
 > is not supported by this upgrade flow. Please fix it before upgrading."
 > means ? As far as I know 4.2 is the most recent branch available, isn't it ?

 I have no idea where did you get

 "Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."

 Please do not cut output and provide exact one.

 IIUC you should do 'yum update ovirt*setup*' and then 'engine-setup'
 and only after it would finish successfully you would do 'yum -y update'.
 Maybe that's your problem?

 Jiri 

-
FreeMail powered by mail.fr  
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-12 Thread Michael Burman

"no default route" bug was fixed only on 4.2.1
Your current version doesn't have the fix

On Mon, Feb 12, 2018 at 11:09 AM,  wrote:

>
>
>
>
> Le 12-Feb-2018 08:06:43 +0100, jbe...@redhat.com a écrit:
>
> > This option relevant only for the upgrade from 3.6 to 4.0(engine had
> > different OS major versions), it all other cases the upgrade flow very
> > similar to upgrade flow of standard engine environment.
> >
> >
> > 1. Put hosted-engine environment to GlobalMaintenance(you can do it via
> > UI)
> > 2. Update engine packages(# yum update -y)
> > 3. Run engine-setup
> > 4. Disable GlobalMaintenance
> >
>
>
> So I followed these steps connected in the engine VM and didn't get any
> error message. But the version showed in the GUI is
> still 4.2.0.2-1.el7.centos. Yum had no newer packages to install. And I
> still have the "no default route" and network validation problems.
> Regards
>
> > Could someone explain me at least what "Cluster PROD is at version 4.2
> which
> > is not supported by this upgrade flow. Please fix it before upgrading."
> > means ? As far as I know 4.2 is the most recent branch available, isn't
> it ?
>
> I have no idea where did you get
>
> "Cluster PROD is at version 4.2 which is not supported by this upgrade
> flow. Please fix it before upgrading."
>
> Please do not cut output and provide exact one.
>
> IIUC you should do 'yum update ovirt\*setup\*' and then 'engine-setup'
> and only after it would finish successfully you would do 'yum -y update'.
> Maybe that's your problem?
>
> Jiri
>
> --
> FreeMail powered by mail.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat



mbur...@redhat.comM: 0545355725 IM: mburman

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-12 Thread spfma . tech

Le 12-Feb-2018 08:06:43 +0100, jbe...@redhat.com a crit: 
> This option relevant only for the upgrade from 3.6 to 4.0(engine had
 > different OS major versions), it all other cases the upgrade flow very
 > similar to upgrade flow of standard engine environment.
 > 
 > 
 > 1. Put hosted-engine environment to GlobalMaintenance(you can do it via
 > UI)
 > 2. Update engine packages(# yum update -y)
 > 3. Run engine-setup
 > 4. Disable GlobalMaintenance
 >   So I followed these steps connected in the engine VM and didn't get any 
 > error message. But the version showed in the GUI is  still 
 > 4.2.0.2-1.el7.centos. Yum had no newer packages to install. And I still have 
 > the "no default route" and network validation problems. Regards   
 > Could someone explain me at least what "Cluster PROD is at version 4.2 which
 > is not supported by this upgrade flow. Please fix it before upgrading."
 > means ? As far as I know 4.2 is the most recent branch available, isn't it ?

 I have no idea where did you get

 "Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."

 Please do not cut output and provide exact one.

 IIUC you should do 'yum update ovirt\*setup\*' and then 'engine-setup'
 and only after it would finish successfully you would do 'yum -y update'.
 Maybe that's your problem?

 Jiri 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-12 Thread spfma . tech

Hi, This is the whole message. Here you get the whole output of the process. I 
runned these commands on the node hosting the engine vm. But if there is a more 
efficient workflow, I am interrested in it !   # yum -y update Modules 
complmentaires chargs : fastestmirror
base | 3.6 kB 00:00:00 
centos-sclo-rh-release | 2.9 kB 00:00:00 
extras | 3.4 kB 00:00:00 
ovirt-4.2 | 3.0 kB 00:00:00 
ovirt-4.2-centos-gluster312 | 2.9 kB 00:00:00 
ovirt-4.2-centos-opstools | 2.9 kB 00:00:00 
ovirt-4.2-centos-ovirt42 | 2.9 kB 00:00:00 
ovirt-4.2-centos-qemu-ev | 2.9 kB 00:00:00 
ovirt-4.2-epel/x86_64/metalink | 26 kB 00:00:00 
ovirt-4.2-virtio-win-latest | 3.0 kB 00:00:00 
updates | 3.4 kB 00:00:00 
Loading mirror speeds from cached hostfile
 * base: fr.mirror.babylon.network
 * extras: ftp.ciril.fr
 * ovirt-4.2: mirror.slu.cz
 * ovirt-4.2-epel: mirror.uv.es
 * updates: mirror.plusserver.com
No packages marked for update
# hosted-engine --upgrade-appliance 
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
 During customization use CTRL-D to abort.

 
==
 Welcome to the oVirt Self Hosted Engine setup/Upgrade tool.

 Please refer to the oVirt install guide:
 https://www.ovirt.org/documentation/how-to/hosted-engine/#fresh-install
 Please refer to the oVirt upgrade guide:
 https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine
 
==
 Continuing will upgrade the engine VM running on this hosts deploying and 
configuring a new appliance.
 If your engine VM is already based on el7 you can also simply upgrade the 
engine there.
 This procedure will create a new disk on the hosted-engine storage domain and 
it will backup there the content of your current engine VM disk.
 The new el7 based appliance will be deployed over the existing disk destroying 
its content; at any time you will be able to rollback using the content of the 
backup disk.
 You will be asked to take a backup of the running engine and copy it to this 
host.
 The engine backup will be automatically injected and recovered on the new 
appliance.
 Are you sure you want to continue? (Yes, No)[Yes]: Yes
 Configuration files: []
 Log file: 
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180212090846-pse285.log
 Version: otopi-1.7.5 (otopi-1.7.5-1.el7.centos)
[ INFO ] Detecting available oVirt engine appliances
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Checking maintenance mode
[ INFO ] The engine VM is running on this host
[ INFO ] Stage: Environment customization

 --== STORAGE CONFIGURATION ==--

[ INFO ] Answer file successfully loaded
[ INFO ] Acquiring internal CA cert from the engine
[ INFO ] The following CA certificate is going to be used, please immediately 
interrupt if not correct:
[ INFO ] Issuer: C=US, O=pfm-ad.pfm.loc, 
CN=pfm-ovirt-engine.pfm-ad.pfm.loc.60769, Subject: C=US, O=pfm-ad.pfm.loc, 
CN=pfm-ovirt-engine.pfm-ad.pfm.loc.60769, Fingerprint (SHA-1): 
2815C0CB4D6E05B7503917173F0D65B452C9D3DC

 --== HOST NETWORK CONFIGURATION ==--

[ INFO ] Checking SPM status on this host
[ INFO ] Connecting to Engine
 Enter engine admin username [admin@internal]: 
 Enter engine admin password: 
[ INFO ] Connecting to Engine
[ INFO ] This upgrade tool is running on the SPM host
[ INFO ] Bridge ovirtmgmt already created
[WARNING] Unable to uniquely detect the interface where Bridge ovirtmgmt has 
been created on, [u'bond0', u'vnet0', u'vnet1', u'vnet2'] appear to be valid 
alternatives

 --== VM CONFIGURATION ==--

 The following appliance have been found on your system:
 [1] - The oVirt Engine Appliance image (OVA) - 4.2-20171219.1.el7.centos
 [2] - Directly select an OVA file
 Please select an appliance (1, 2) [1]: 1
[ INFO ] Verifying its sha1sum
[ INFO ] Checking OVF archive content (could take a few minutes depending on 
archive size)
[ INFO ] Checking OVF XML content (could take a few minutes depending on 
archive size)
 Please specify the size of the VM disk in GB: [50]: 
[ INFO ] Connecting to Engine
[ INFO ] The hosted-engine storage domain has enough free space to contain a 
new backup disk.
[ INFO ] Checking version requirements
[ INFO ] Checking metadata area
[ INFO ] Hosted-engine configuration is at a compatible level
[ INFO ] Connecting to Engine
[ ERROR ] Cluster PROD is at version 4.2 which is not supported by this upgrade 
flow. Please fix it before upgrading.
[ ERROR ] Failed to execute stage 'Environment customization': Unsupported 
cluster level
[ INFO ] Stage: Clean up
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine upgrade failed

 Le 12-Feb-2018 08:06:43 +0100, jbe...@redhat.com a crit: 
> This option relevant only for the upgrade from 3.6 to 4.0(engine had
 > different OS major versions), it all other cases the

Re: [ovirt-users] Network configuration validation error

2018-02-11 Thread Jiri Belka

> This option relevant only for the upgrade from 3.6 to 4.0(engine had
> different OS major versions), it all other cases the upgrade flow very
> similar to upgrade flow of standard engine environment.
> 
> 
> 1. Put hosted-engine environment to GlobalMaintenance(you can do it via
> UI)
> 2. Update engine packages(# yum update -y)
> 3. Run engine-setup
> 4. Disable GlobalMaintenance
>
> Could someone explain me at least what "Cluster PROD is at version 4.2 which
> is not supported by this upgrade flow. Please fix it before upgrading."
> means ? As far as I know 4.2 is the most recent branch available, isn't it ?

I have no idea where did you get

"Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."

Please do not cut output and provide exact one.

IIUC you should do 'yum update ovirt\*setup\*' and then 'engine-setup'
and only after it would finish successfully you would do 'yum -y update'.
Maybe that's your problem?

Jiri
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-11 Thread Artyom Lukianov

This option relevant only for the upgrade from 3.6 to 4.0(engine had
different OS major versions), it all other cases the upgrade flow very
similar to upgrade flow of standard engine environment.

   1. Put hosted-engine environment to GlobalMaintenance(you can do it via
   UI)
   2. Update engine packages(# yum update -y)
   3. Run engine-setup
   4. Disable GlobalMaintenance

Best Regards

On Fri, Feb 9, 2018 at 1:21 PM,  wrote:

> Hi,
> Could someone explain me at least what "Cluster PROD is at version 4.2
> which is not supported by this upgrade flow. Please fix it before
> upgrading." means ? As far as I know 4.2 is the most recent branch
> available, isn't it ?
> Regards
>
>
>
> Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a écrit:
>
> Not sure i understand from which version you trying to upgrade and what is
> the exact upgrade flow, if i got it correctly, it is seems that you
> upgraded the hosts to 4.2, but engine still 4.1?
> What exactly the upgrade steps, please explain the flow., what have you
> done after upgrading the hosts? to what version?
>
> Cheers)
>
> On Wed, Feb 7, 2018 at 3:00 PM,  wrote:
>
>> Hi,
>> Thanks a lot for your answer.
>>
>> I applied some updates at node level, but I forgot to upgrade the engine !
>>
>> When I try to do so I get a strange error : "Cluster PROD is at version
>> 4.2 which is not supported by this upgrade flow. Please fix it before
>> upgrading."
>>
>> Here are the installed packets on my nodes :
>> python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
>> ovirt-imageio-common-1.2.0-1.el7.centos.noarch
>> ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
>> ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
>> ovirt-setup-lib-1.1.4-1.el7.centos.noarch
>> ovirt-release42-4.2.0-1.el7.centos.noarch
>> ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
>> ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
>> ovirt-host-4.2.0-1.el7.centos.x86_64
>> ovirt-host-deploy-1.7.0-1.el7.centos.noarch
>> ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
>> ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
>> ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
>> ovirt-vmconsole-host-1.0.4-1.el7.noarch
>> cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
>> ovirt-vmconsole-1.0.4-1.el7.noarch
>>
>> What I am supposed to do ? I see no newer packages available.
>>
>> Regards
>>
>>
>>
>> Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a écrit:
>>
>> Hi
>>
>> This is a bug and it was already fixed in 4.2.1.1-0.1.el7 -
>> https://bugzilla.redhat.com/show_bug.cgi?id=1528906
>>
>> The no default route bug was fixed in - https://bugzilla.redhat.com/
>> show_bug.cgi?id=1477589
>>
>> Thanks,
>>
>> On Wed, Feb 7, 2018 at 1:15 PM,  wrote:
>>
>>>
>>> Hi,
>>> I am experiencing a new problem : when I try to modify something in the
>>> network setup on the second node (added to the cluster after installing the
>>> engine on the other one) using the Engine GUI, I get the following error
>>> when validating :
>>>
>>> must match "^\b((25[0-5]|2[0-4]\d|[01]\d\
>>> d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
>>> Attribut : ipConfiguration.iPv4Addresses[0].gateway
>>>
>>> Moreover, on the general status of ther server, I have a "Host has no
>>> default route" alert.
>>>
>>> The ovirtmgmt network has a defined gateway of course, and the storage
>>> network has none because it is not required. Both server have the same
>>> setup, with different addresses of course :-)
>>>
>>> I have not been able to find anything useful in the logs.
>>>
>>> Is this a bug or am I doing something wrong ?
>>>
>>> Regards
>>>
>>> --
>>> FreeMail powered by mail.fr
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>>
>> --
>>
>> Michael Burman
>>
>> Senior Quality engineer - rhv network - redhat israel
>>
>> Red Hat
>>
>> 
>>
>> mbur...@redhat.comM: 0545355725 IM: mburman
>>
>>
>>
>> --
>> FreeMail powered by mail.fr
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> 
>
> mbur...@redhat.comM: 0545355725 IM: mburman
>
>
>
> --
> FreeMail powered by mail.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-11 Thread Michael Burman

Jiri, can you maybe assist the user with his upgrade problem?

I'm not familiar with the error and not sure how could it be that he is
already has a cluster version 4.2 prior upgrading the engine to 4.2..unless
i didn't understood it completely..

Thanks,

On Fri, Feb 9, 2018 at 1:21 PM,  wrote:

> Hi,
> Could someone explain me at least what "Cluster PROD is at version 4.2
> which is not supported by this upgrade flow. Please fix it before
> upgrading." means ? As far as I know 4.2 is the most recent branch
> available, isn't it ?
> Regards
>
>
>
> Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a écrit:
>
> Not sure i understand from which version you trying to upgrade and what is
> the exact upgrade flow, if i got it correctly, it is seems that you
> upgraded the hosts to 4.2, but engine still 4.1?
> What exactly the upgrade steps, please explain the flow., what have you
> done after upgrading the hosts? to what version?
>
> Cheers)
>
> On Wed, Feb 7, 2018 at 3:00 PM,  wrote:
>
>> Hi,
>> Thanks a lot for your answer.
>>
>> I applied some updates at node level, but I forgot to upgrade the engine !
>>
>> When I try to do so I get a strange error : "Cluster PROD is at version
>> 4.2 which is not supported by this upgrade flow. Please fix it before
>> upgrading."
>>
>> Here are the installed packets on my nodes :
>> python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
>> ovirt-imageio-common-1.2.0-1.el7.centos.noarch
>> ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
>> ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
>> ovirt-setup-lib-1.1.4-1.el7.centos.noarch
>> ovirt-release42-4.2.0-1.el7.centos.noarch
>> ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
>> ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
>> ovirt-host-4.2.0-1.el7.centos.x86_64
>> ovirt-host-deploy-1.7.0-1.el7.centos.noarch
>> ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
>> ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
>> ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
>> ovirt-vmconsole-host-1.0.4-1.el7.noarch
>> cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
>> ovirt-vmconsole-1.0.4-1.el7.noarch
>>
>> What I am supposed to do ? I see no newer packages available.
>>
>> Regards
>>
>>
>>
>> Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a écrit:
>>
>> Hi
>>
>> This is a bug and it was already fixed in 4.2.1.1-0.1.el7 -
>> https://bugzilla.redhat.com/show_bug.cgi?id=1528906
>>
>> The no default route bug was fixed in - https://bugzilla.redhat.com/
>> show_bug.cgi?id=1477589
>>
>> Thanks,
>>
>> On Wed, Feb 7, 2018 at 1:15 PM,  wrote:
>>
>>>
>>> Hi,
>>> I am experiencing a new problem : when I try to modify something in the
>>> network setup on the second node (added to the cluster after installing the
>>> engine on the other one) using the Engine GUI, I get the following error
>>> when validating :
>>>
>>> must match "^\b((25[0-5]|2[0-4]\d|[01]\d\
>>> d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
>>> Attribut : ipConfiguration.iPv4Addresses[0].gateway
>>>
>>> Moreover, on the general status of ther server, I have a "Host has no
>>> default route" alert.
>>>
>>> The ovirtmgmt network has a defined gateway of course, and the storage
>>> network has none because it is not required. Both server have the same
>>> setup, with different addresses of course :-)
>>>
>>> I have not been able to find anything useful in the logs.
>>>
>>> Is this a bug or am I doing something wrong ?
>>>
>>> Regards
>>>
>>> --
>>> FreeMail powered by mail.fr
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>>
>> --
>>
>> Michael Burman
>>
>> Senior Quality engineer - rhv network - redhat israel
>>
>> Red Hat
>>
>> 
>>
>> mbur...@redhat.comM: 0545355725 IM: mburman
>>
>>
>>
>> --
>> FreeMail powered by mail.fr
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> 
>
> mbur...@redhat.comM: 0545355725 IM: mburman
>
>
>
> --
> FreeMail powered by mail.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat



mbur...@redhat.comM: 0545355725 IM: mburman

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-09 Thread spfma . tech

Hi, Could someone explain me at least what "Cluster PROD is at version 4.2 
which is not supported by this upgrade flow. Please fix it before upgrading." 
means ? As far as I know 4.2 is the most recent branch available, isn't it ? 
Regards 

 Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a crit: 
   Not sure i understand from which version you trying to upgrade and what is 
the exact upgrade flow, if i got it correctly, it is seems that you upgraded 
the hosts to 4.2, but engine still 4.1?  What exactly the upgrade steps, please 
explain the flow., what have you done after upgrading the hosts? to what 
version?

 Cheers) 
 On Wed, Feb 7, 2018 at 3:00 PM,  wrote:

 Hi, Thanks a lot for your answer.I applied some updates at node level, but 
I forgot to upgrade the engine !   When I try to do so I get a strange error : 
"Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."   Here are the installed packets on my nodes : 
python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
ovirt-imageio-common-1.2.0-1.el7.centos.noarch
ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
ovirt-release42-4.2.0-1.el7.centos.noarch
ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
ovirt-host-4.2.0-1.el7.centos.x86_64
ovirt-host-deploy-1.7.0-1.el7.centos.noarch
ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
ovirt-vmconsole-host-1.0.4-1.el7.noarch
cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
ovirt-vmconsole-1.0.4-1.el7.noarch   What I am supposed to do ? I see no newer 
packages available.   Regards   

 Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a crit: 
Hi

 This is a bug and it was already fixed in 4.2.1.1-0.1.el7 - 
https://bugzilla.redhat.com/show_bug.cgi?id=1528906

 The no default route bug was fixed in - 
https://bugzilla.redhat.com/show_bug.cgi?id=1477589

 Thanks, 
 On Wed, Feb 7, 2018 at 1:15 PM,  wrote:

   Hi, I am experiencing a new problem : when I try to modify something in the 
network setup on the second node (added to the cluster after installing the 
engine on the other one) using the Engine GUI, I get the following error when 
validating :must match 
"^\b((25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
 Attribut : ipConfiguration.iPv4Addresses[0].gateway   Moreover, on the general 
status of ther server, I have a "Host has no default route" alert.   The 
ovirtmgmt network has a defined gateway of course, and the storage network has 
none because it is not required. Both server have the same setup, with 
different addresses of course :-)   I have not been able to find anything 
useful in the logs.   Is this a bug or am I doing something wrong ?   Regards 

-
FreeMail powered by mail.fr 
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr  
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-08 Thread spfma . tech

In fact I don't know what flow should be followed. I have found several 
documentations, but most deal with older version so I am not sure I am doing 
right.
 Is there a working documented procedure somewhere ? 

 Le 08-Feb-2018 11:17:06 +0100, mbur...@redhat.com a crit: 
  Thanks, I'm not so familiar with the hosted-engine --upgrade-appliance flow, 
can someone from the list that is familiar with such flow assist?  
 On Thu, Feb 8, 2018 at 12:10 PM,  wrote:

 Hi,   I installed my nodes with the latest packages available in repositories. 
Then I installed the self-hosted engine on one of them, created the cluster and 
added the second node.   When I encountered these network config problems and 
saw your answer, I thougt it was time to update some packages to get 
corrections.   So I just runned a "yum update" on the nodes and rebooted them.  
 Then I put the engine in global maintenance mode and tried "hosted-engine 
--upgrade-appliance" on the node hosting it.   But it failed returning me this 
cluster version error.   The engine's about windows says "Software 
Version:4.2.0.2-1.el7.centos"   And for the hosts :OS Version:RHEL - 7 
- 4.1708.el7.centos OS Description:CentOS Linux 7 (Core) Kernel 
Version:3.10.0 - 693.17.1.el7.x86_64 KVM Version:2.9.0 - 16.el7_4.13.1  
   LIBVIRT Version:libvirt-3.2.0-14.el7_4.7 VDSM 
Version:vdsm-4.20.9.3-1.el7.centos SPICE Version:0.12.8 - 2.el7.1   
  GlusterFS Version:[N/A] CEPH Version:librbd1-0.94.5-2.el7  
Regards 

 Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a crit: 
   Not sure i understand from which version you trying to upgrade and what is 
the exact upgrade flow, if i got it correctly, it is seems that you upgraded 
the hosts to 4.2, but engine still 4.1? What exactly the upgrade steps, please 
explain the flow., what have you done after upgrading the hosts? to what 
version?

 Cheers) 
 On Wed, Feb 7, 2018 at 3:00 PM,  wrote:

 Hi, Thanks a lot for your answer.I applied some updates at node level, but 
I forgot to upgrade the engine !   When I try to do so I get a strange error : 
"Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."   Here are the installed packets on my nodes : 
python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
ovirt-imageio-common-1.2.0-1.el7.centos.noarch
ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
ovirt-release42-4.2.0-1.el7.centos.noarch
ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
ovirt-host-4.2.0-1.el7.centos.x86_64
ovirt-host-deploy-1.7.0-1.el7.centos.noarch
ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
ovirt-vmconsole-host-1.0.4-1.el7.noarch
cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
ovirt-vmconsole-1.0.4-1.el7.noarch   What I am supposed to do ? I see no newer 
packages available.   Regards   

 Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a crit: 
Hi

 This is a bug and it was already fixed in 4.2.1.1-0.1.el7 - 
https://bugzilla.redhat.com/show_bug.cgi?id=1528906

 The no default route bug was fixed in - 
https://bugzilla.redhat.com/show_bug.cgi?id=1477589

 Thanks, 
 On Wed, Feb 7, 2018 at 1:15 PM,  wrote:

   Hi, I am experiencing a new problem : when I try to modify something in the 
network setup on the second node (added to the cluster after installing the 
engine on the other one) using the Engine GUI, I get the following error when 
validating :must match 
"^\b((25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
 Attribut : ipConfiguration.iPv4Addresses[0].gateway   Moreover, on the general 
status of ther server, I have a "Host has no default route" alert.   The 
ovirtmgmt network has a defined gateway of course, and the storage network has 
none because it is not required. Both server have the same setup, with 
different addresses of course :-)   I have not been able to find anything 
useful in the logs.   Is this a bug or am I doing something wrong ?   Regards 

-
FreeMail powered by mail.fr 
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr  
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel

Re: [ovirt-users] Network configuration validation error

2018-02-08 Thread Michael Burman

Thanks,
I'm not so familiar with the hosted-engine --upgrade-appliance flow, can
someone from the list that is familiar with such flow assist?

On Thu, Feb 8, 2018 at 12:10 PM,  wrote:

> Hi,
>
> I installed my nodes with the latest packages available in repositories.
> Then I installed the self-hosted engine on one of them, created the cluster
> and added the second node.
>
> When I encountered these network config problems and saw your answer, I
> thougt it was time to update some packages to get corrections.
>
> So I just runned a "yum update" on the nodes and rebooted them.
>
> Then I put the  engine in global maintenance mode and tried "hosted-engine
> --upgrade-appliance" on the node hosting it.
>
> But it failed returning me this cluster version error.
>
> The engine's about windows says "Software Version:4.2.0.2-1.el7.centos"
>
> And for the hosts :
> OS Version:RHEL - 7 - 4.1708.el7.centos
> OS Description:CentOS Linux 7 (Core)
> Kernel Version:3.10.0 - 693.17.1.el7.x86_64
> KVM Version:2.9.0 - 16.el7_4.13.1
> LIBVIRT Version:libvirt-3.2.0-14.el7_4.7
> VDSM Version:vdsm-4.20.9.3-1.el7.centos
> SPICE Version:0.12.8 - 2.el7.1
> GlusterFS Version:[N/A]
> CEPH Version:librbd1-0.94.5-2.el7
>
> Regards
>
>
>
>
> Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a écrit:
>
> Not sure i understand from which version you trying to upgrade and what is
> the exact upgrade flow, if i got it correctly, it is seems that you
> upgraded the hosts to 4.2, but engine still 4.1?
> What exactly the upgrade steps, please explain the flow., what have you
> done after upgrading the hosts? to what version?
>
> Cheers)
>
> On Wed, Feb 7, 2018 at 3:00 PM,  wrote:
>
>> Hi,
>> Thanks a lot for your answer.
>>
>> I applied some updates at node level, but I forgot to upgrade the engine !
>>
>> When I try to do so I get a strange error : "Cluster PROD is at version
>> 4.2 which is not supported by this upgrade flow. Please fix it before
>> upgrading."
>>
>> Here are the installed packets on my nodes :
>> python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
>> ovirt-imageio-common-1.2.0-1.el7.centos.noarch
>> ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
>> ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
>> ovirt-setup-lib-1.1.4-1.el7.centos.noarch
>> ovirt-release42-4.2.0-1.el7.centos.noarch
>> ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
>> ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
>> ovirt-host-4.2.0-1.el7.centos.x86_64
>> ovirt-host-deploy-1.7.0-1.el7.centos.noarch
>> ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
>> ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
>> ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
>> ovirt-vmconsole-host-1.0.4-1.el7.noarch
>> cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
>> ovirt-vmconsole-1.0.4-1.el7.noarch
>>
>> What I am supposed to do ? I see no newer packages available.
>>
>> Regards
>>
>>
>>
>> Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a écrit:
>>
>> Hi
>>
>> This is a bug and it was already fixed in 4.2.1.1-0.1.el7 -
>> https://bugzilla.redhat.com/show_bug.cgi?id=1528906
>>
>> The no default route bug was fixed in - https://bugzilla.redhat.com/
>> show_bug.cgi?id=1477589
>>
>> Thanks,
>>
>> On Wed, Feb 7, 2018 at 1:15 PM,  wrote:
>>
>>>
>>> Hi,
>>> I am experiencing a new problem : when I try to modify something in the
>>> network setup on the second node (added to the cluster after installing the
>>> engine on the other one) using the Engine GUI, I get the following error
>>> when validating :
>>>
>>> must match "^\b((25[0-5]|2[0-4]\d|[01]\d\
>>> d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
>>> Attribut : ipConfiguration.iPv4Addresses[0].gateway
>>>
>>> Moreover, on the general status of ther server, I have a "Host has no
>>> default route" alert.
>>>
>>> The ovirtmgmt network has a defined gateway of course, and the storage
>>> network has none because it is not required. Both server have the same
>>> setup, with different addresses of course :-)
>>>
>>> I have not been able to find anything useful in the logs.
>>>
>>> Is this a bug or am I doing something wrong ?
>>>
>>> Regards
>>>
>>> --
>>> FreeMail powered by mail.fr
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>>
>> --
>>
>> Michael Burman
>>
>> Senior Quality engineer - rhv network - redhat israel
>>
>> Red Hat
>>
>> 
>>
>> mbur...@redhat.comM: 0545355725 IM: mburman
>>
>>
>>
>> --
>> FreeMail powered by mail.fr
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> 
>
> mbur...@redhat.comM:

Re: [ovirt-users] Network configuration validation error

2018-02-08 Thread spfma . tech

Hi,   I installed my nodes with the latest packages available in repositories. 
Then I installed the self-hosted engine on one of them, created the cluster and 
added the second node.   When I encountered these network config problems and 
saw your answer, I thougt it was time to update some packages to get 
corrections.   So I just runned a "yum update" on the nodes and rebooted them.  
 Then I put the engine in global maintenance mode and tried "hosted-engine 
--upgrade-appliance" on the node hosting it.   But it failed returning me this 
cluster version error.   The engine's about windows says "Software 
Version:4.2.0.2-1.el7.centos"   And for the hosts :OS Version:RHEL - 7 
- 4.1708.el7.centos OS Description:CentOS Linux 7 (Core) Kernel 
Version:3.10.0 - 693.17.1.el7.x86_64 KVM Version:2.9.0 - 16.el7_4.13.1  
   LIBVIRT Version:libvirt-3.2.0-14.el7_4.7 VDSM 
Version:vdsm-4.20.9.3-1.el7.centos SPICE Version:0.12.8 - 2.el7.1   
  GlusterFS Version:[N/A] CEPH Version:librbd1-0.94.5-2.el7  
Regards   

 Le 08-Feb-2018 09:59:32 +0100, mbur...@redhat.com a crit: 
   Not sure i understand from which version you trying to upgrade and what is 
the exact upgrade flow, if i got it correctly, it is seems that you upgraded 
the hosts to 4.2, but engine still 4.1?  What exactly the upgrade steps, please 
explain the flow., what have you done after upgrading the hosts? to what 
version?

 Cheers) 
 On Wed, Feb 7, 2018 at 3:00 PM,  wrote:

 Hi, Thanks a lot for your answer.I applied some updates at node level, but 
I forgot to upgrade the engine !   When I try to do so I get a strange error : 
"Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."   Here are the installed packets on my nodes : 
python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
ovirt-imageio-common-1.2.0-1.el7.centos.noarch
ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
ovirt-release42-4.2.0-1.el7.centos.noarch
ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
ovirt-host-4.2.0-1.el7.centos.x86_64
ovirt-host-deploy-1.7.0-1.el7.centos.noarch
ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
ovirt-vmconsole-host-1.0.4-1.el7.noarch
cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
ovirt-vmconsole-1.0.4-1.el7.noarch   What I am supposed to do ? I see no newer 
packages available.   Regards   

 Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a crit: 
Hi

 This is a bug and it was already fixed in 4.2.1.1-0.1.el7 - 
https://bugzilla.redhat.com/show_bug.cgi?id=1528906

 The no default route bug was fixed in - 
https://bugzilla.redhat.com/show_bug.cgi?id=1477589

 Thanks, 
 On Wed, Feb 7, 2018 at 1:15 PM,  wrote:

   Hi, I am experiencing a new problem : when I try to modify something in the 
network setup on the second node (added to the cluster after installing the 
engine on the other one) using the Engine GUI, I get the following error when 
validating :must match 
"^\b((25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
 Attribut : ipConfiguration.iPv4Addresses[0].gateway   Moreover, on the general 
status of ther server, I have a "Host has no default route" alert.   The 
ovirtmgmt network has a defined gateway of course, and the storage network has 
none because it is not required. Both server have the same setup, with 
different addresses of course :-)   I have not been able to find anything 
useful in the logs.   Is this a bug or am I doing something wrong ?   Regards 

-
FreeMail powered by mail.fr 
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr  
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-08 Thread Michael Burman

Not sure i understand from which version you trying to upgrade and what is
the exact upgrade flow, if i got it correctly, it is seems that you
upgraded the hosts to 4.2, but engine still 4.1?
What exactly the upgrade steps, please explain the flow., what have you
done after upgrading the hosts? to what version?

Cheers)

On Wed, Feb 7, 2018 at 3:00 PM,  wrote:

> Hi,
> Thanks a lot for your answer.
>
> I applied some updates at node level, but I forgot to upgrade the engine !
>
> When I try to do so I get a strange error : "Cluster PROD is at version
> 4.2 which is not supported by this upgrade flow. Please fix it before
> upgrading."
>
> Here are the installed packets on my nodes :
> python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
> ovirt-imageio-common-1.2.0-1.el7.centos.noarch
> ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
> ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
> ovirt-setup-lib-1.1.4-1.el7.centos.noarch
> ovirt-release42-4.2.0-1.el7.centos.noarch
> ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
> ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
> ovirt-host-4.2.0-1.el7.centos.x86_64
> ovirt-host-deploy-1.7.0-1.el7.centos.noarch
> ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
> ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
> ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
> ovirt-vmconsole-host-1.0.4-1.el7.noarch
> cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
> ovirt-vmconsole-1.0.4-1.el7.noarch
>
> What I am supposed to do ? I see no newer packages available.
>
> Regards
>
>
>
> Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a écrit:
>
> Hi
>
> This is a bug and it was already fixed in 4.2.1.1-0.1.el7 -
> https://bugzilla.redhat.com/show_bug.cgi?id=1528906
>
> The no default route bug was fixed in - https://bugzilla.redhat.com/
> show_bug.cgi?id=1477589
>
> Thanks,
>
> On Wed, Feb 7, 2018 at 1:15 PM,  wrote:
>
>>
>> Hi,
>> I am experiencing a new problem : when I try to modify something in the
>> network setup on the second node (added to the cluster after installing the
>> engine on the other one) using the Engine GUI, I get the following error
>> when validating :
>>
>> must match "^\b((25[0-5]|2[0-4]\d|[01]\d\
>> d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
>> Attribut : ipConfiguration.iPv4Addresses[0].gateway
>>
>> Moreover, on the general status of ther server, I have a "Host has no
>> default route" alert.
>>
>> The ovirtmgmt network has a defined gateway of course, and the storage
>> network has none because it is not required. Both server have the same
>> setup, with different addresses of course :-)
>>
>> I have not been able to find anything useful in the logs.
>>
>> Is this a bug or am I doing something wrong ?
>>
>> Regards
>>
>> --
>> FreeMail powered by mail.fr
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> 
>
> mbur...@redhat.comM: 0545355725 IM: mburman
>
>
>
> --
> FreeMail powered by mail.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat



mbur...@redhat.comM: 0545355725 IM: mburman

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-07 Thread spfma . tech

Hi, Thanks a lot for your answer.I applied some updates at node level, but 
I forgot to upgrade the engine !   When I try to do so I get a strange error : 
"Cluster PROD is at version 4.2 which is not supported by this upgrade flow. 
Please fix it before upgrading."   Here are the installed packets on my nodes : 
python-ovirt-engine-sdk4-4.2.2-2.el7.centos.x86_64
ovirt-imageio-common-1.2.0-1.el7.centos.noarch
ovirt-hosted-engine-setup-2.2.3-1.el7.centos.noarch
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
ovirt-release42-4.2.0-1.el7.centos.noarch
ovirt-imageio-daemon-1.2.0-1.el7.centos.noarch
ovirt-host-dependencies-4.2.0-1.el7.centos.x86_64
ovirt-host-4.2.0-1.el7.centos.x86_64
ovirt-host-deploy-1.7.0-1.el7.centos.noarch
ovirt-hosted-engine-ha-2.2.2-1.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.2-1.el7.centos.noarch
ovirt-engine-appliance-4.2-20171219.1.el7.centos.noarch
ovirt-vmconsole-host-1.0.4-1.el7.noarch
cockpit-ovirt-dashboard-0.11.3-0.1.el7.centos.noarch
ovirt-vmconsole-1.0.4-1.el7.noarch   What I am supposed to do ? I see no newer 
packages available.   Regards 

 Le 07-Feb-2018 13:23:43 +0100, mbur...@redhat.com a crit: 
Hi

 This is a bug and it was already fixed in 4.2.1.1-0.1.el7 - 
https://bugzilla.redhat.com/show_bug.cgi?id=1528906

 The no default route bug was fixed in - 
https://bugzilla.redhat.com/show_bug.cgi?id=1477589

 Thanks,  
 On Wed, Feb 7, 2018 at 1:15 PM,  wrote:

   Hi, I am experiencing a new problem : when I try to modify something in the 
network setup on the second node (added to the cluster after installing the 
engine on the other one) using the Engine GUI, I get the following error when 
validating :must match 
"^\b((25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
 Attribut : ipConfiguration.iPv4Addresses[0].gateway   Moreover, on the general 
status of ther server, I have a "Host has no default route" alert.   The 
ovirtmgmt network has a defined gateway of course, and the storage network has 
none because it is not required. Both server have the same setup, with 
different addresses of course :-)   I have not been able to find anything 
useful in the logs.   Is this a bug or am I doing something wrong ?   Regards 

-
FreeMail powered by mail.fr 
___
 Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 

Michael Burman 

Senior Quality engineer - rhv network - redhat israel 

Red Hat 

 mbur...@redhat.com  M: 0545355725 IM: mburman 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

2018-02-07 Thread Michael Burman

Hi

This is a bug and it was already fixed in 4.2.1.1-0.1.el7 -
https://bugzilla.redhat.com/show_bug.cgi?id=1528906

The no default route bug was fixed in -
https://bugzilla.redhat.com/show_bug.cgi?id=1477589

Thanks,

On Wed, Feb 7, 2018 at 1:15 PM,  wrote:

>
> Hi,
> I am experiencing a new problem : when I try to modify something in the
> network setup on the second node (added to the cluster after installing the
> engine on the other one) using the Engine GUI, I get the following error
> when validating :
>
> must match "^\b((25[0-5]|2[0-4]\d|[01]\d\
> d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
> Attribut : ipConfiguration.iPv4Addresses[0].gateway
>
> Moreover, on the general status of ther server, I have a "Host has no
> default route" alert.
>
> The ovirtmgmt network has a defined gateway of course, and the storage
> network has none because it is not required. Both server have the same
> setup, with different addresses of course :-)
>
> I have not been able to find anything useful in the logs.
>
> Is this a bug or am I doing something wrong ?
>
> Regards
>
> --
> FreeMail powered by mail.fr
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat



mbur...@redhat.comM: 0545355725 IM: mburman

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Network configuration validation error

2018-02-07 Thread spfma . tech

Hi, I am experiencing a new problem : when I try to modify something in the 
network setup on the second node (added to the cluster after installing the 
engine on the other one) using the Engine GUI, I get the following error when 
validating :must match 
"^\b((25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)\_){3}(25[0-5]|2[0-4]\d|[01]\d\d|\d?\d)"
 Attribut : ipConfiguration.iPv4Addresses[0].gateway   Moreover, on the general 
status of ther server, I have a "Host has no default route" alert.   The 
ovirtmgmt network has a defined gateway of course, and the storage network has 
none because it is not required. Both server have the same setup, with 
different addresses of course :-)   I have not been able to find anything 
useful in the logs.   Is this a bug or am I doing something wrong ?   Regards 

-
FreeMail powered by mail.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

Re: [ovirt-users] Network configuration validation error

[ovirt-users] Network configuration validation error

16 matches

Site Navigation

Mail list logo

Footer information