On 4/2/2018 6:55 AM, Alex K wrote:
First issue with fencing is solved per an earlier reply.
Second issue has also been solved earlier the way you outlined but I'm
wondering why oVirt can't use br0 as the ovirtmgmt interface instead?
What specific settings on br0 does it NOT like? Is there any
Hi,
you need a second host so as power management to work.
Since you verified it with command line then adding a second host should
resolve this issue.
In regards to the interface, you need to remove the bridge interface as
instructed (make it a simple interface) then leave ovirt to configure it
On Thu, Mar 29, 2018 at 7:24 AM, TomK wrote:
> Hey Guy's,
>
> I've tested my ILO2 fence from the ovirt engine CLI and that works:
>
> fence_ilo2 -a 192.168.0.37 -l --password="" --ssl-insecure
> --tls1.0 -v -o status
>
You are using additional options on command line, please add below to the
O
- Original Message -
> From: "Eriks Goodwin"
> To: "Eli Mesika"
> Sent: Tuesday, December 29, 2015 4:13:11 AM
> Subject: Re: [ovirt-users] iLO2
>
> [root@n001 ~]# /usr/sbin/fence_ipmilan --ip=10.0.1.104 --username=ovirtmgmt
> --password=REDA
- Original Message -
> From: "Eriks Goodwin"
> To: "users"
> Sent: Tuesday, December 22, 2015 11:08:15 AM
> Subject: [ovirt-users] iLO2
>
> I have been tinkering with various settings and configurations trying to get
> power management working properly--but it keeps giving me "Fail:" (
Hello,
we also had a lot of issues using ILOs of older DL360 hosts. We
ended up using "ipmilan" with options "lanplus=1,power_wait=4".
Assuming of course you are able to access the management module/port
from the network your ovirt nodes are running in.
regards,
--
Dominique Taffin
Systemadmi
6 matches
Mail list logo
