Re: [Users] Adding Gluster support after the fact.

2013-10-29 Thread Itamar Heim 

On 10/29/2013 02:43 PM, Gabi C wrote:

Hello!

Sorry, I was unclear about my instalation: so my management node is
Fedora 19 with Ovirt-stables and ovirt-updates-testing repos enabled
installed with 'Both' - to be sure I 'grep' ed in ovirt-engine-setup
'ApplicationMode' and got  'select
fn_db_add_config_value('ApplicationMode','255','general');' ; my 2 hosts
(nodes) are virt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso.
and the problem is as described in my previous message.


hmmm, I'm not sure if ovirt-node has gluster in it out of the box or 
not. can you try a regular fedora/centos/rhel host?


thanks,
   Itamar




On Tue, Oct 29, 2013 at 2:16 PM, Sven Kieske mailto:s.kie...@mittwald.de>> wrote:

Hi,

no, when talking about "both" mode the ovirt-engine (management node)
setup was the targeted installation.
if you did not install the engine in "both" mode, you need to tweak the
DB or reinstall.

HTH

Am 29.10.2013 09:36, schrieb Gabi C:
 > Hello!
 >
 > I have installed from iso
 > ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in "
Both " mode.
 > When I try to check the gluster checkbox on the cluster edit
page, then put
 > the node in mainenance mode an try to Reinstall I get
 > "There are no ISO versions that are compatible with the Host's
current
 > version."


--
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100 
F: +49-5772-293-333 
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad
Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad
Oeynhausen
___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Adding Gluster support after the fact.

2013-10-29 Thread Gabi C 
Hello!

Sorry, I was unclear about my instalation: so my management node is Fedora
19 with Ovirt-stables and ovirt-updates-testing repos enabled installed
with 'Both' - to be sure I 'grep' ed in ovirt-engine-setup
'ApplicationMode' and got  'select
fn_db_add_config_value('ApplicationMode','255','general');' ; my 2 hosts
(nodes) are virt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso. and
the problem is as described in my previous message.


On Tue, Oct 29, 2013 at 2:16 PM, Sven Kieske  wrote:

> Hi,
>
> no, when talking about "both" mode the ovirt-engine (management node)
> setup was the targeted installation.
> if you did not install the engine in "both" mode, you need to tweak the
> DB or reinstall.
>
> HTH
>
> Am 29.10.2013 09:36, schrieb Gabi C:
> > Hello!
> >
> > I have installed from iso
> > ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both "
> mode.
> > When I try to check the gluster checkbox on the cluster edit page, then
> put
> > the node in mainenance mode an try to Reinstall I get
> > "There are no ISO versions that are compatible with the Host's current
> > version."
>
>
> --
> Mit freundlichen Grüßen / Regards
>
> Sven Kieske
>
> Systemadministrator
> Mittwald CM Service GmbH & Co. KG
> Königsberger Straße 6
> 32339 Espelkamp
> T: +49-5772-293-100
> F: +49-5772-293-333
> https://www.mittwald.de
> Geschäftsführer: Robert Meyer
> St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
> Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Adding Gluster support after the fact.

2013-10-29 Thread Sven Kieske 
Hi,

no, when talking about "both" mode the ovirt-engine (management node)
setup was the targeted installation.
if you did not install the engine in "both" mode, you need to tweak the
DB or reinstall.

HTH

Am 29.10.2013 09:36, schrieb Gabi C:
> Hello!
> 
> I have installed from iso
> ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both " mode.
> When I try to check the gluster checkbox on the cluster edit page, then put
> the node in mainenance mode an try to Reinstall I get
> "There are no ISO versions that are compatible with the Host's current
> version."


-- 
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Adding Gluster support after the fact.

2013-10-29 Thread Gabi C 
Hello!

I have installed from iso
ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both " mode.
When I try to check the gluster checkbox on the cluster edit page, then put
the node in mainenance mode an try to Reinstall I get
"There are no ISO versions that are compatible with the Host's current
version."


On Tue, Oct 29, 2013 at 5:54 AM, Kanagaraj  wrote:

> On 10/29/2013 02:54 AM, Joop wrote:
>
>> Rob Abshear wrote:
>>
>>> I initially installed oVirt without Gluster management support.  Now I
>>> want to add it in.  What is the best method for doing this?  I tried
>>> running engine-cleanup and then engine-setup to add it in that way.  But
>>> the only thing I accomplished was to hose my install.  Now that I have
>>> recovered from that, I still want to add this.  Any help would be
>>> appreciated.
>>>
>>
> Recommended way is to select 'Both' for 'ApplicationMode' during
> engine-setup.
>
> But if you want to do this after engine-setup, you need to tweak a
> database entry. You could find an option_name called 'ApplicationMode' in
> the vdc_options table, change the value of the field to 255, then restart
> ovirt-engine service. Now you should able to manage both virt and gluster
> in oVirt.
>
>
>  Just set check the gluster checkbox on the cluster edit page, put the
>> node/host into maintenance and reinstall it. It will install the gluster
>> bits and you'll be able to add volumes.
>>
>>
> This is possible only if oVirt is installed in 'Both' (Virt+Gluster) mode.
>
> Thanks,
> Kanagaraj
>
>
>  Joop
>>
>>
>>
>> __**_
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/**mailman/listinfo/users
>>
>
> __**_
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/**mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Adding Gluster support after the fact.

2013-10-28 Thread Kanagaraj 

On 10/29/2013 02:54 AM, Joop wrote:

Rob Abshear wrote:
I initially installed oVirt without Gluster management support.  Now 
I want to add it in.  What is the best method for doing this?  I 
tried running engine-cleanup and then engine-setup to add it in that 
way.  But the only thing I accomplished was to hose my install.  Now 
that I have recovered from that, I still want to add this.  Any help 
would be appreciated.


Recommended way is to select 'Both' for 'ApplicationMode' during 
engine-setup.


But if you want to do this after engine-setup, you need to tweak a 
database entry. You could find an option_name called 'ApplicationMode' 
in the vdc_options table, change the value of the field to 255, then 
restart ovirt-engine service. Now you should able to manage both virt 
and gluster in oVirt.


Just set check the gluster checkbox on the cluster edit page, put the 
node/host into maintenance and reinstall it. It will install the 
gluster bits and you'll be able to add volumes.




This is possible only if oVirt is installed in 'Both' (Virt+Gluster) mode.

Thanks,
Kanagaraj


Joop



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Adding Gluster support after the fact.

2013-10-28 Thread Joop 

Rob Abshear wrote:
I initially installed oVirt without Gluster management support.  Now I 
want to add it in.  What is the best method for doing this?  I tried 
running engine-cleanup and then engine-setup to add it in that way.  
But the only thing I accomplished was to hose my install.  Now that I 
have recovered from that, I still want to add this.  Any help would be 
appreciated.
Just set check the gluster checkbox on the cluster edit page, put the 
node/host into maintenance and reinstall it. It will install the gluster 
bits and you'll be able to add volumes.


Joop



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Adding Gluster support after the fact.

2013-10-28 Thread Rob Abshear 
I initially installed oVirt without Gluster management support.  Now I 
want to add it in.  What is the best method for doing this?  I tried 
running engine-cleanup and then engine-setup to add it in that way.  But 
the only thing I accomplished was to hose my install.  Now that I have 
recovered from that, I still want to add this.  Any help would be 
appreciated.




--


*NADA Convention & Expo*:  January 24-27, 2014 - New Orleans, LA - Booth 
5001


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users