subject:"\[Users\] Error installing self hosted engine"

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

2016-03-28 Thread Roy Golan

On Sat, Mar 26, 2016 at 4:13 AM, Modou Conteh  wrote:

> Thanks for your reponse, No I have not tried that but I was able use the
> iso image and install the vm but when the vm starts it does not have
> internet connection even after configuring eth0 with a valid ip address.  I
> decided to start over but there is no easy way to start over. Also the disk
> that was used for installing the VM could not be reused even though there
> is plenty of space on it.  It seems it says it could not be initialized, I
> had to use the delete the raid config and readd through the BOIS setup to
> be able to reuse the disk.
> I am trying again one more time and see.  I hope there is a way to make
> the disk available again after a failed setup instead of the above
> mentioned method.
>
> Thanks
> On Mar 25, 2016 04:01, "Simone Tiraboschi"  wrote:
>
>> On Wed, Mar 23, 2016 at 8:15 PM, Modou Conteh
>>  wrote:
>> >
>> > I am seeking some assistance installing Ovirt Self hosted Engine, but I
>> keep getting and error at the end "System not stable or unable to read
>> dev/mapper etc.  here is the log file from my last try.  I am testing this
>> for use at work as a test environment, there I have a single server to run
>> this on the reason I choose the Self Hosted Engine.  I guess the
>> instructions is not clear either, i.e when i try to disk install with Cento
>> OVA I get and error, and finally when I choose the cdrom it work fine until
>> the end and fail to initialize /dev/mapper, etc.
>> > Any assistance will be highly appreciated.
>> >
>>
>> Did you tried running
>>  yum install ovirt-engine-appliance
>> ?
>>
>
Strongly suggest to use the appliance, this will make the process easier,
quicker and less error prone. More than that, the install is geared for
that. if you have a reserved mac address which is resolved and the storage
space ready, you can get up and running in 15 minutes or so.

>
>> It will download a ready to use Centos base appliance with oVirt engine
>> on it.
>>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

2016-03-26 Thread Modou Conteh

Thanks for your reponse, No I have not tried that but I was able use the
iso image and install the vm but when the vm starts it does not have
internet connection even after configuring eth0 with a valid ip address.  I
decided to start over but there is no easy way to start over. Also the disk
that was used for installing the VM could not be reused even though there
is plenty of space on it.  It seems it says it could not be initialized, I
had to use the delete the raid config and readd through the BOIS setup to
be able to reuse the disk.
I am trying again one more time and see.  I hope there is a way to make the
disk available again after a failed setup instead of the above mentioned
method.

Thanks
On Mar 25, 2016 04:01, "Simone Tiraboschi"  wrote:

> On Wed, Mar 23, 2016 at 8:15 PM, Modou Conteh
>  wrote:
> >
> > I am seeking some assistance installing Ovirt Self hosted Engine, but I
> keep getting and error at the end "System not stable or unable to read
> dev/mapper etc.  here is the log file from my last try.  I am testing this
> for use at work as a test environment, there I have a single server to run
> this on the reason I choose the Self Hosted Engine.  I guess the
> instructions is not clear either, i.e when i try to disk install with Cento
> OVA I get and error, and finally when I choose the cdrom it work fine until
> the end and fail to initialize /dev/mapper, etc.
> > Any assistance will be highly appreciated.
> >
>
> Did you tried running
>  yum install ovirt-engine-appliance
> ?
>
> It will download a ready to use Centos base appliance with oVirt engine on
> it.
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

2016-03-25 Thread Simone Tiraboschi

On Wed, Mar 23, 2016 at 8:15 PM, Modou Conteh
 wrote:
>
> I am seeking some assistance installing Ovirt Self hosted Engine, but I keep 
> getting and error at the end "System not stable or unable to read dev/mapper 
> etc.  here is the log file from my last try.  I am testing this for use at 
> work as a test environment, there I have a single server to run this on the 
> reason I choose the Self Hosted Engine.  I guess the instructions is not 
> clear either, i.e when i try to disk install with Cento OVA I get and error, 
> and finally when I choose the cdrom it work fine until the end and fail to 
> initialize /dev/mapper, etc.
> Any assistance will be highly appreciated.
>

Did you tried running
 yum install ovirt-engine-appliance
?

It will download a ready to use Centos base appliance with oVirt engine on it.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Error installing self hosted engine

2014-04-04 Thread Sandro Bonazzola

Il 01/04/2014 16:15, Sandro Bonazzola ha scritto:
 Il 01/04/2014 15:38, ovirt-t...@arcor.de ha scritto:
 Hello,

 I'm new to this list and I need help installing a self hosted engine

 I've installed CentOS 6.5 and oVirt 3.4. The following repositories are 
 enabled:
 yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm
 yum localinstall 
 http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
 yum localinstall 
 http://mirrors.dotsrc.org/jpackage/6.0/generic/free/RPMS/jpackage-release-6-3.jpp6.noarch.rpm

 Just wanted to check out the self hosted feature. But I get this error:

 # hosted-engine --deploy
 [ INFO  ] Stage: Initializing
   Continuing will configure this host for serving as hypervisor and 
 create a VM where you have to install oVirt Engine afterwards.
   Are you sure you want to continue? (Yes, No)[Yes]: 
 [ INFO  ] Generating a temporary VNC password.
 [ INFO  ] Stage: Environment setup
   Configuration files: []
   Log file: 
 /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140401153028.log
   Version: otopi-1.2.0 (otopi-1.2.0-1.el6)
 [ INFO  ] Hardware supports virtualization
 [ INFO  ] Stage: Environment packages setup
 [ INFO  ] Stage: Programs detection
 [ INFO  ] Stage: Environment setup
 [ ERROR ] Failed to execute stage 'Environment setup': Fault 1: type 
 'exceptions.TypeError':cannot marshal None unless allow_none is enabled
 [ INFO  ] Stage: Clean up
 [ INFO  ] Stage: Pre-termination
 [ INFO  ] Stage: Termination

 It is not this error:
 http://lists.ovirt.org/pipermail/users/2014-March/022424.html

 In my logfile are the following errors:
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.executeRaw:366 execute: ('/sbin/service', 'vdsmd', 'status'), 
 executable='None', cwd='None', env=None
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.executeRaw:383 execute-result: ('/sbin/service', 'vdsmd', 'status'), 
 rc=0
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.execute:441 execute-output: ('/sbin/service', 'vdsmd', 'status') 
 stdout:
 VDS daemon server is running

 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.execute:446 execute-output: ('/sbin/service', 'vdsmd', 'status') 
 stderr:


 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel rhel.status:147 
 service vdsmd status True
 2014-04-01 15:30:32 DEBUG otopi.context context._executeMethod:152 method 
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in 
 _executeMethod
 method['method']()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
  line 157, in _late_setup
 self._connect()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
  line 78, in _connect
 hwinfo = serv.s.getVdsHardwareInfo()
   File /usr/lib64/python2.6/xmlrpclib.py, line 1199, in __call__
 return self.__send(self.__name, args)
   File /usr/lib64/python2.6/xmlrpclib.py, line 1489, in __request
 verbose=self.__verbose
   File /usr/lib64/python2.6/xmlrpclib.py, line 1253, in request
 return self._parse_response(h.getfile(), sock)
   File /usr/lib64/python2.6/xmlrpclib.py, line 1392, in _parse_response
 return u.close()
   File /usr/lib64/python2.6/xmlrpclib.py, line 838, in close
 raise Fault(**self._stack[0])
 Fault: Fault 1: type 'exceptions.TypeError':cannot marshal None unless 
 allow_none is enabled
 2014-04-01 15:30:32 ERROR otopi.context context._executeMethod:161 Failed to 
 execute stage 'Environment setup': Fault 1: type 
 'exceptions.TypeError':cannot marshal None unless allow_none is enabled
 2014-04-01 15:30:32 DEBUG otopi.context context.dumpEnvironment:468 
 ENVIRONMENT DUMP - BEGIN

Corresponding to the above call to getVdsHardwareInfo vdsm log shows:

Thread-22::DEBUG::2014-04-01 15:30:32,100::BindingXMLRPC::1067::vds::(wrapper) 
client [127.0.0.1]::call getHardwareInfo with () {}
Thread-22::DEBUG::2014-04-01 15:30:32,110::BindingXMLRPC::1074::vds::(wrapper) 
return getHardwareInfo with {'status': {'message': 'Done', 'code': 0},
'info': {'systemProductName': 'ProLiant DL380 G5', 'systemSerialNumber': 
'CZC6451JFR', 'systemFamily': None, 'systemVersion': 'Not Specified',
'systemUUID': '435a4336-3435-435a-4336-3435314a4652', 'systemManufacturer': 
'HP'}}

And corresponding supervdsm log:
MainProcess|Thread-22::DEBUG::2014-04-01 
15:30:32,109::supervdsmServer::96::SuperVdsm.ServerCallback::(wrapper) call 
getHardwareInfo with () {}
MainProcess|Thread-22::DEBUG::2014-04-01 
15:30:32,109::supervdsmServer::103::SuperVdsm.ServerCallback::(wrapper) return 
getHardwareInfo with
{'systemProductName': 'ProLiant DL380 G5', 'systemSerialNumber': 'CZC6451JFR', 
'systemFamily': None, 'systemVersion': 'Not Specified', 'systemUUID':

Re: [Users] Error installing self hosted engine

2014-04-04 Thread Dan Kenigsberg

On Fri, Apr 04, 2014 at 04:28:29PM +0200, Sandro Bonazzola wrote:
 Il 01/04/2014 16:15, Sandro Bonazzola ha scritto:
  Il 01/04/2014 15:38, ovirt-t...@arcor.de ha scritto:
  Hello,
 
  I'm new to this list and I need help installing a self hosted engine
 
  I've installed CentOS 6.5 and oVirt 3.4. The following repositories are 
  enabled:
  yum localinstall 
  http://resources.ovirt.org/releases/ovirt-release.noarch.rpm
  yum localinstall 
  http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
  yum localinstall 
  http://mirrors.dotsrc.org/jpackage/6.0/generic/free/RPMS/jpackage-release-6-3.jpp6.noarch.rpm
 
  Just wanted to check out the self hosted feature. But I get this error:
 
  # hosted-engine --deploy
  [ INFO  ] Stage: Initializing
Continuing will configure this host for serving as hypervisor 
  and create a VM where you have to install oVirt Engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]: 
  [ INFO  ] Generating a temporary VNC password.
  [ INFO  ] Stage: Environment setup
Configuration files: []
Log file: 
  /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140401153028.log
Version: otopi-1.2.0 (otopi-1.2.0-1.el6)
  [ INFO  ] Hardware supports virtualization
  [ INFO  ] Stage: Environment packages setup
  [ INFO  ] Stage: Programs detection
  [ INFO  ] Stage: Environment setup
  [ ERROR ] Failed to execute stage 'Environment setup': Fault 1: type 
  'exceptions.TypeError':cannot marshal None unless allow_none is enabled
  [ INFO  ] Stage: Clean up
  [ INFO  ] Stage: Pre-termination
  [ INFO  ] Stage: Termination
 
  It is not this error:
  http://lists.ovirt.org/pipermail/users/2014-March/022424.html
 
  In my logfile are the following errors:
  2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
  plugin.executeRaw:366 execute: ('/sbin/service', 'vdsmd', 'status'), 
  executable='None', cwd='None', env=None
  2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
  plugin.executeRaw:383 execute-result: ('/sbin/service', 'vdsmd', 
  'status'), rc=0
  2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
  plugin.execute:441 execute-output: ('/sbin/service', 'vdsmd', 'status') 
  stdout:
  VDS daemon server is running
 
  2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
  plugin.execute:446 execute-output: ('/sbin/service', 'vdsmd', 'status') 
  stderr:
 
 
  2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
  rhel.status:147 service vdsmd status True
  2014-04-01 15:30:32 DEBUG otopi.context context._executeMethod:152 method 
  exception
  Traceback (most recent call last):
File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in 
  _executeMethod
  method['method']()
File 
  /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
   line 157, in _late_setup
  self._connect()
File 
  /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
   line 78, in _connect
  hwinfo = serv.s.getVdsHardwareInfo()
File /usr/lib64/python2.6/xmlrpclib.py, line 1199, in __call__
  return self.__send(self.__name, args)
File /usr/lib64/python2.6/xmlrpclib.py, line 1489, in __request
  verbose=self.__verbose
File /usr/lib64/python2.6/xmlrpclib.py, line 1253, in request
  return self._parse_response(h.getfile(), sock)
File /usr/lib64/python2.6/xmlrpclib.py, line 1392, in _parse_response
  return u.close()
File /usr/lib64/python2.6/xmlrpclib.py, line 838, in close
  raise Fault(**self._stack[0])
  Fault: Fault 1: type 'exceptions.TypeError':cannot marshal None unless 
  allow_none is enabled
  2014-04-01 15:30:32 ERROR otopi.context context._executeMethod:161 Failed 
  to execute stage 'Environment setup': Fault 1: type 
  'exceptions.TypeError':cannot marshal None unless allow_none is enabled
  2014-04-01 15:30:32 DEBUG otopi.context context.dumpEnvironment:468 
  ENVIRONMENT DUMP - BEGIN
 
 Corresponding to the above call to getVdsHardwareInfo vdsm log shows:
 
 Thread-22::DEBUG::2014-04-01 
 15:30:32,100::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call 
 getHardwareInfo with () {}
 Thread-22::DEBUG::2014-04-01 
 15:30:32,110::BindingXMLRPC::1074::vds::(wrapper) return getHardwareInfo with 
 {'status': {'message': 'Done', 'code': 0},
 'info': {'systemProductName': 'ProLiant DL380 G5', 'systemSerialNumber': 
 'CZC6451JFR',

That's the culprit:

 'systemFamily': None,

Vdsm must never return None since it cannot be marshaled over standard
xmlrpc.

Please open an Vdsm bug on this!

 'systemVersion': 'Not Specified',
 'systemUUID': '435a4336-3435-435a-4336-3435314a4652', 'systemManufacturer': 
 'HP'}}
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Error installing self hosted engine

2014-04-01 Thread ovirt-test

Hello,

I'm new to this list and I need help installing a self hosted engine

I've installed CentOS 6.5 and oVirt 3.4. The following repositories are enabled:
yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm
yum localinstall 
http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
yum localinstall 
http://mirrors.dotsrc.org/jpackage/6.0/generic/free/RPMS/jpackage-release-6-3.jpp6.noarch.rpm

Just wanted to check out the self hosted feature. But I get this error:

# hosted-engine --deploy
[ INFO  ] Stage: Initializing
  Continuing will configure this host for serving as hypervisor and 
create a VM where you have to install oVirt Engine afterwards.
  Are you sure you want to continue? (Yes, No)[Yes]: 
[ INFO  ] Generating a temporary VNC password.
[ INFO  ] Stage: Environment setup
  Configuration files: []
  Log file: 
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140401153028.log
  Version: otopi-1.2.0 (otopi-1.2.0-1.el6)
[ INFO  ] Hardware supports virtualization
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup
[ ERROR ] Failed to execute stage 'Environment setup': Fault 1: type 
'exceptions.TypeError':cannot marshal None unless allow_none is enabled
[ INFO  ] Stage: Clean up
[ INFO  ] Stage: Pre-termination
[ INFO  ] Stage: Termination

It is not this error:
http://lists.ovirt.org/pipermail/users/2014-March/022424.html

In my logfile are the following errors:
2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
plugin.executeRaw:366 execute: ('/sbin/service', 'vdsmd', 'status'), 
executable='None', cwd='None', env=None
2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
plugin.executeRaw:383 execute-result: ('/sbin/service', 'vdsmd', 'status'), rc=0
2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:441 
execute-output: ('/sbin/service', 'vdsmd', 'status') stdout:
VDS daemon server is running

2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:446 
execute-output: ('/sbin/service', 'vdsmd', 'status') stderr:


2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel rhel.status:147 
service vdsmd status True
2014-04-01 15:30:32 DEBUG otopi.context context._executeMethod:152 method 
exception
Traceback (most recent call last):
  File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in 
_executeMethod
method['method']()
  File 
/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
 line 157, in _late_setup
self._connect()
  File 
/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
 line 78, in _connect
hwinfo = serv.s.getVdsHardwareInfo()
  File /usr/lib64/python2.6/xmlrpclib.py, line 1199, in __call__
return self.__send(self.__name, args)
  File /usr/lib64/python2.6/xmlrpclib.py, line 1489, in __request
verbose=self.__verbose
  File /usr/lib64/python2.6/xmlrpclib.py, line 1253, in request
return self._parse_response(h.getfile(), sock)
  File /usr/lib64/python2.6/xmlrpclib.py, line 1392, in _parse_response
return u.close()
  File /usr/lib64/python2.6/xmlrpclib.py, line 838, in close
raise Fault(**self._stack[0])
Fault: Fault 1: type 'exceptions.TypeError':cannot marshal None unless 
allow_none is enabled
2014-04-01 15:30:32 ERROR otopi.context context._executeMethod:161 Failed to 
execute stage 'Environment setup': Fault 1: type 
'exceptions.TypeError':cannot marshal None unless allow_none is enabled
2014-04-01 15:30:32 DEBUG otopi.context context.dumpEnvironment:468 ENVIRONMENT 
DUMP - BEGIN

Can anybody help me how to fix this problem?

Thank you
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Error installing self hosted engine

2014-04-01 Thread Sandro Bonazzola

Il 01/04/2014 15:38, ovirt-t...@arcor.de ha scritto:
 Hello,
 
 I'm new to this list and I need help installing a self hosted engine
 
 I've installed CentOS 6.5 and oVirt 3.4. The following repositories are 
 enabled:
 yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm
 yum localinstall 
 http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
 yum localinstall 
 http://mirrors.dotsrc.org/jpackage/6.0/generic/free/RPMS/jpackage-release-6-3.jpp6.noarch.rpm
 
 Just wanted to check out the self hosted feature. But I get this error:
 
 # hosted-engine --deploy
 [ INFO  ] Stage: Initializing
   Continuing will configure this host for serving as hypervisor and 
 create a VM where you have to install oVirt Engine afterwards.
   Are you sure you want to continue? (Yes, No)[Yes]: 
 [ INFO  ] Generating a temporary VNC password.
 [ INFO  ] Stage: Environment setup
   Configuration files: []
   Log file: 
 /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140401153028.log
   Version: otopi-1.2.0 (otopi-1.2.0-1.el6)
 [ INFO  ] Hardware supports virtualization
 [ INFO  ] Stage: Environment packages setup
 [ INFO  ] Stage: Programs detection
 [ INFO  ] Stage: Environment setup
 [ ERROR ] Failed to execute stage 'Environment setup': Fault 1: type 
 'exceptions.TypeError':cannot marshal None unless allow_none is enabled
 [ INFO  ] Stage: Clean up
 [ INFO  ] Stage: Pre-termination
 [ INFO  ] Stage: Termination
 
 It is not this error:
 http://lists.ovirt.org/pipermail/users/2014-March/022424.html
 
 In my logfile are the following errors:
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.executeRaw:366 execute: ('/sbin/service', 'vdsmd', 'status'), 
 executable='None', cwd='None', env=None
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.executeRaw:383 execute-result: ('/sbin/service', 'vdsmd', 'status'), 
 rc=0
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.execute:441 execute-output: ('/sbin/service', 'vdsmd', 'status') 
 stdout:
 VDS daemon server is running
 
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel 
 plugin.execute:446 execute-output: ('/sbin/service', 'vdsmd', 'status') 
 stderr:
 
 
 2014-04-01 15:30:32 DEBUG otopi.plugins.otopi.services.rhel rhel.status:147 
 service vdsmd status True
 2014-04-01 15:30:32 DEBUG otopi.context context._executeMethod:152 method 
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in 
 _executeMethod
 method['method']()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
  line 157, in _late_setup
 self._connect()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py,
  line 78, in _connect
 hwinfo = serv.s.getVdsHardwareInfo()
   File /usr/lib64/python2.6/xmlrpclib.py, line 1199, in __call__
 return self.__send(self.__name, args)
   File /usr/lib64/python2.6/xmlrpclib.py, line 1489, in __request
 verbose=self.__verbose
   File /usr/lib64/python2.6/xmlrpclib.py, line 1253, in request
 return self._parse_response(h.getfile(), sock)
   File /usr/lib64/python2.6/xmlrpclib.py, line 1392, in _parse_response
 return u.close()
   File /usr/lib64/python2.6/xmlrpclib.py, line 838, in close
 raise Fault(**self._stack[0])
 Fault: Fault 1: type 'exceptions.TypeError':cannot marshal None unless 
 allow_none is enabled
 2014-04-01 15:30:32 ERROR otopi.context context._executeMethod:161 Failed to 
 execute stage 'Environment setup': Fault 1: type 
 'exceptions.TypeError':cannot marshal None unless allow_none is enabled
 2014-04-01 15:30:32 DEBUG otopi.context context.dumpEnvironment:468 
 ENVIRONMENT DUMP - BEGIN
 
 Can anybody help me how to fix this problem?

Can you please attach also vdsm logs?




 
 Thank you
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

Re: [ovirt-users] Error Installing Self hosted Engine on Centos 7

Re: [Users] Error installing self hosted engine

Re: [Users] Error installing self hosted engine

[Users] Error installing self hosted engine

Re: [Users] Error installing self hosted engine

7 matches

Site Navigation

Mail list logo

Footer information