Re: [Users] Storage domain mount options
- Original Message - > From: "Shu Ming" > To: "Alexandru Vladulescu" > Cc: "users" > Sent: Tuesday, January 8, 2013 3:48:06 PM > Subject: Re: [Users] Storage domain mount options > > Alexandru Vladulescu : > > > > Dear Shu, > > > > > > Exactly what I was saying, in that section we can only change in > > the > > Advanced Parameters the NFS version, the Retransmissions and the > > Timeout. > Sorry, was not seeing these. I am afraid you can not append other > options, for neither ovirt engine nor VDSM accepts other options than > Retransmissions and the Timeout. Hi, first, please open an RFE for it: https://bugzilla.redhat.com/enter_bug.cgi?product=oVirt second, you can set it in vdsm.conf configuration file (/etc/vdsm/vdsm.conf). as for how to do it, check out sample config file distributed with the rpm: /usr/share/doc/vdsm-4.9.6/vdsm.conf.sample make sure to restart vdsmd service on each hypervisor afterwards. Haim > > > > > Therefore I see exactly no field for additional mount options. > > > > As I know there is a thread on the mailing list about the new > > features > > that should be included in the 3.2 version release. I think would > > be > > useful to include this one too to the GUI, but again my question, > > how > > could this be modified in the stable 3.1 release ? > > > > > > Alex > > > > > > On 01/08/2013 03:31 PM, Shu Ming wrote: > >> Alexandru Vladulescu: > >>> > >>> Hello Guys, > >>> > >>> > >>> I would like to ask you help for the following problem I am > >>> facing > >>> right now. > >>> > >>> As we know, on the Storage tab we can configure storage domains > >>> in > >>> many types. I am using NFS, and when configuring a such export on > >>> the Advanced Parameters section we can only adjust the NFS > >>> version, > >>> Retrans and Timeout. > >>> > >>> After a successful configuration setup, on all hypervisors I have > >>> the mount share declared attached. The result of mount for the > >>> share > >>> datastore looks like below: > >>> > >>> nas01.net:/datastore01/nas01.ISO on > >>> /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs > >>> (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) > >>> > >>> > >>> All good and sound but how can I tune the NFS mounting command, > >>> for > >>> example let's say adding noatime value to the mount option list ? > >> New domain ---> Advanced Parameters. > >> > >>> > >>> > >>> Many thanks, > >>> Alex. > >>> ___ > >>> Users mailing list > >>> Users@ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >> > >> > > > > > -- > --- > 舒明 Shu Ming > Open Virtualization Engineerning; CSTL, IBM Corp. > Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or > shum...@linux.vnet.ibm.com > Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian > District, Beijing 100193, PRC > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain mount options
Alexandru Vladulescu : Dear Shu, Exactly what I was saying, in that section we can only change in the Advanced Parameters the NFS version, the Retransmissions and the Timeout. Sorry, was not seeing these. I am afraid you can not append other options, for neither ovirt engine nor VDSM accepts other options than Retransmissions and the Timeout. Therefore I see exactly no field for additional mount options. As I know there is a thread on the mailing list about the new features that should be included in the 3.2 version release. I think would be useful to include this one too to the GUI, but again my question, how could this be modified in the stable 3.1 release ? Alex On 01/08/2013 03:31 PM, Shu Ming wrote: Alexandru Vladulescu: Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? New domain ---> Advanced Parameters. Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain mount options
Dear Shu, Exactly what I was saying, in that section we can only change in the Advanced Parameters the NFS version, the Retransmissions and the Timeout. Therefore I see exactly no field for additional mount options. As I know there is a thread on the mailing list about the new features that should be included in the 3.2 version release. I think would be useful to include this one too to the GUI, but again my question, how could this be modified in the stable 3.1 release ? Alex On 01/08/2013 03:31 PM, Shu Ming wrote: Alexandru Vladulescu: Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? New domain ---> Advanced Parameters. Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain mount options
Alexandru Vladulescu: Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? New domain ---> Advanced Parameters. Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Storage domain mount options
Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users