Re: [Users] Upgrading ovirt-engine from Centos dre repo

2013-01-02 Thread Ricky Schneberger 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Yes I understand that, and hopefully someone can help me. I have sent
email to the maintainer for the rpms and hopefully :-)

My WMs is running but they live on the edge.

Regards //Ricky

On 2013-01-02 21:32, Itamar Heim wrote:
> On 01/02/2013 08:47 PM, Ricky Schneberger wrote: Finally.
> 
> After some major issues that comes and goes I end up in a
> situation where I am unable to upgrade my oVirt.
> 
>> I hope someone can help, but since you are using rpms which we
>> have no idea which patches they include, etc, it is a bit hard. 
>> (i.e., iiuc, its from a specific distro, maintaining backports
>> of patches on its own)
> 
> 
> I think this is the base of my problem and if I cannot solve this
> I will have strange issues for the rest
> 
> Its seems to be exact same problem as in this thread 
> http://lists.ovirt.org/pipermail/users/2012-August/008799.html.
> 
> I run an "engine-upgrade" and got
> 
> Loaded plugins: fastestmirror, versionlock Checking for updates...
> (This may take several minutes) Loading mirror speeds from cached
> hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras:
> ftp.availo.se * updates: ftp.availo.se 11 Updates available: *
> ovirt-engine-3.1.0-3.19.el6.noarch *
> ovirt-engine-backend-3.1.0-3.19.el6.noarch *
> ovirt-engine-config-3.1.0-3.19.el6.noarch *
> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch *
> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch *
> ovirt-engine-notification-service-3.1.0-3.19.el6.noarch *
> ovirt-engine-restapi-3.1.0-3.19.el6.noarch *
> ovirt-engine-setup-3.1.0-3.19.el6.noarch *
> ovirt-engine-tools-common-3.1.0-3.19.el6.noarch *
> ovirt-engine-userportal-3.1.0-3.19.el6.noarch *
> ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
> 
> Error: New ovirt-engine-setup rpm available via yum. Please execute
> `yum update ovirt-engine-setup`, then re-execute 
> 'ovirt-engine-upgrade'. To use the current ovirt-engine-setup rpm,
> execute 'ovirt-engine-upgrade --force-current-setup-rpm'.
> 
> So I did.
> 
> [root@ovirt ~]# yum update ovirt-engine-setup Loaded plugins:
> fastestmirror, versionlock Loading mirror speeds from cached
> hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras:
> ftp.availo.se * updates: ftp.availo.se Setting up Update Process No
> Packages marked for Update
> 
> I also checked which version i have.
> 
> [root@ovirt ~]# rpm -q ovirt-engine-setup 
> ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64
> 
> Then I start
> 
> Becuase the installed package was missing in repos I did...
> 
> [root@ovirt ~]# engine-upgrade --force-current-setup-rpm 
> --no-yum-rollback Loaded plugins: fastestmirror, versionlock 
> Checking for updates... (This may take several minutes) Loading
> mirror speeds from cached hostfile * base: ftp.availo.se * epel:
> mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 
> 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch *
> ovirt-engine-backend-3.1.0-3.19.el6.noarch *
> ovirt-engine-config-3.1.0-3.19.el6.noarch *
> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch *
> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch *
> ovirt-engine-notification-service-3.1.0-3.19.el6.noarch *
> ovirt-engine-restapi-3.1.0-3.19.el6.noarch *
> ovirt-engine-setup-3.1.0-3.19.el6.noarch *
> ovirt-engine-tools-common-3.1.0-3.19.el6.noarch *
> ovirt-engine-userportal-3.1.0-3.19.el6.noarch *
> ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
> 
> During the upgrade process, oVirt-Engine  will not be accessible. 
> All existing running virtual machines will continue but you will
> not be able to start or stop any new virtual machines during the
> process.
> 
> Would you like to proceed? (yes|no): yes Stopping JBoss Service...
> [ DONE ] Backing Up Database...   [
> DONE ] Rename Database...   [
> DONE ] Updating rpms... [
> DONE ] Updating Database... [
> DONE ] Restore Database name... [
> DONE ] Running post install configuration...[
> DONE ] Starting JBoss...[
> DONE ]
> 
> oVirt-Engine upgrade completed successfully!
> 
> To complete the upgrade (last line) I have to restart jboss-as
> service in another session.
> 
> I then repeat the first step and got this...
> 
> [root@ovirt ~]# engine-upgrade Loaded plugins: fastestmirror,
> versionlock Checking for updates... (This may take several
> minutes) Loading mirror speeds from cached hostfile * base:
> ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se *
> updates: ftp.availo.se 11 Updates available: *
> ovirt-engine-3.1.0-3.19.el6.noarch *
> ovirt-engine-backend-3.1.0-3.19.el6.noarch *
> ovirt-engine-config-3.1.0-3.19.el6.noarch *
> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch *
> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch *
> ovirt-engine-notificati

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2013-01-02 Thread Itamar Heim 

On 01/02/2013 08:47 PM, Ricky Schneberger wrote:

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Finally.

After some major issues that comes and goes I end up in a situation
where I am unable to upgrade my oVirt.


I hope someone can help, but since you are using rpms which we have no 
idea which patches they include, etc, it is a bit hard.
(i.e., iiuc, its from a specific distro, maintaining backports of 
patches on its own)




I think this is the base of my problem and if I cannot solve this I
will have strange issues for the rest

Its seems to be exact same problem as in this thread
http://lists.ovirt.org/pipermail/users/2012-August/008799.html.

I run an "engine-upgrade" and got

Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
  * base: ftp.availo.se
  * epel: mirror.nsc.liu.se
  * extras: ftp.availo.se
  * updates: ftp.availo.se
11 Updates available:
  * ovirt-engine-3.1.0-3.19.el6.noarch
  * ovirt-engine-backend-3.1.0-3.19.el6.noarch
  * ovirt-engine-config-3.1.0-3.19.el6.noarch
  * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
  * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
  * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-setup-3.1.0-3.19.el6.noarch
  * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
  * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
  * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'ovirt-engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute
'ovirt-engine-upgrade --force-current-setup-rpm'.

So I did.

[root@ovirt ~]# yum update ovirt-engine-setup
Loaded plugins: fastestmirror, versionlock
Loading mirror speeds from cached hostfile
  * base: ftp.availo.se
  * epel: mirror.nsc.liu.se
  * extras: ftp.availo.se
  * updates: ftp.availo.se
Setting up Update Process
No Packages marked for Update

I also checked which version i have.

[root@ovirt ~]# rpm -q ovirt-engine-setup
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64

Then I start

Becuase the installed package was missing in repos I did...

[root@ovirt ~]# engine-upgrade --force-current-setup-rpm --no-yum-rollback
Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
  * base: ftp.availo.se
  * epel: mirror.nsc.liu.se
  * extras: ftp.availo.se
  * updates: ftp.availo.se
11 Updates available:
  * ovirt-engine-3.1.0-3.19.el6.noarch
  * ovirt-engine-backend-3.1.0-3.19.el6.noarch
  * ovirt-engine-config-3.1.0-3.19.el6.noarch
  * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
  * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
  * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-setup-3.1.0-3.19.el6.noarch
  * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
  * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
  * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

During the upgrade process, oVirt-Engine  will not be accessible.
All existing running virtual machines will continue but you will not
be able to
start or stop any new virtual machines during the process.

Would you like to proceed? (yes|no): yes
Stopping JBoss Service...[ DONE ]
Backing Up Database...   [ DONE ]
Rename Database...   [ DONE ]
Updating rpms... [ DONE ]
Updating Database... [ DONE ]
Restore Database name... [ DONE ]
Running post install configuration...[ DONE ]
Starting JBoss...[ DONE ]

oVirt-Engine upgrade completed successfully!

To complete the upgrade (last line) I have to restart jboss-as service
  in another session.

I then repeat the first step and got this...

[root@ovirt ~]# engine-upgrade
Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
  * base: ftp.availo.se
  * epel: mirror.nsc.liu.se
  * extras: ftp.availo.se
  * updates: ftp.availo.se
11 Updates available:
  * ovirt-engine-3.1.0-3.19.el6.noarch
  * ovirt-engine-backend-3.1.0-3.19.el6.noarch
  * ovirt-engine-config-3.1.0-3.19.el6.noarch
  * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
  * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
  * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
  * ovirt-engine-setup-3.1.0-3.19.el6.noarch
  * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
  * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
  * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

Error: New ovirt-engine-setup rpm available via

[Users] Upgrading ovirt-engine from Centos dre repo

2013-01-02 Thread Ricky Schneberger 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Finally.

After some major issues that comes and goes I end up in a situation
where I am unable to upgrade my oVirt.

I think this is the base of my problem and if I cannot solve this I
will have strange issues for the rest

Its seems to be exact same problem as in this thread
http://lists.ovirt.org/pipermail/users/2012-August/008799.html.

I run an "engine-upgrade" and got

Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
 * base: ftp.availo.se
 * epel: mirror.nsc.liu.se
 * extras: ftp.availo.se
 * updates: ftp.availo.se
11 Updates available:
 * ovirt-engine-3.1.0-3.19.el6.noarch
 * ovirt-engine-backend-3.1.0-3.19.el6.noarch
 * ovirt-engine-config-3.1.0-3.19.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-setup-3.1.0-3.19.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'ovirt-engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute
'ovirt-engine-upgrade --force-current-setup-rpm'.

So I did.

[root@ovirt ~]# yum update ovirt-engine-setup
Loaded plugins: fastestmirror, versionlock
Loading mirror speeds from cached hostfile
 * base: ftp.availo.se
 * epel: mirror.nsc.liu.se
 * extras: ftp.availo.se
 * updates: ftp.availo.se
Setting up Update Process
No Packages marked for Update

I also checked which version i have.

[root@ovirt ~]# rpm -q ovirt-engine-setup
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64

Then I start

Becuase the installed package was missing in repos I did...

[root@ovirt ~]# engine-upgrade --force-current-setup-rpm --no-yum-rollback
Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
 * base: ftp.availo.se
 * epel: mirror.nsc.liu.se
 * extras: ftp.availo.se
 * updates: ftp.availo.se
11 Updates available:
 * ovirt-engine-3.1.0-3.19.el6.noarch
 * ovirt-engine-backend-3.1.0-3.19.el6.noarch
 * ovirt-engine-config-3.1.0-3.19.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-setup-3.1.0-3.19.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

During the upgrade process, oVirt-Engine  will not be accessible.
All existing running virtual machines will continue but you will not
be able to
start or stop any new virtual machines during the process.

Would you like to proceed? (yes|no): yes
Stopping JBoss Service...[ DONE ]
Backing Up Database...   [ DONE ]
Rename Database...   [ DONE ]
Updating rpms... [ DONE ]
Updating Database... [ DONE ]
Restore Database name... [ DONE ]
Running post install configuration...[ DONE ]
Starting JBoss...[ DONE ]

oVirt-Engine upgrade completed successfully!

To complete the upgrade (last line) I have to restart jboss-as service
 in another session.

I then repeat the first step and got this...

[root@ovirt ~]# engine-upgrade
Loaded plugins: fastestmirror, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
 * base: ftp.availo.se
 * epel: mirror.nsc.liu.se
 * extras: ftp.availo.se
 * updates: ftp.availo.se
11 Updates available:
 * ovirt-engine-3.1.0-3.19.el6.noarch
 * ovirt-engine-backend-3.1.0-3.19.el6.noarch
 * ovirt-engine-config-3.1.0-3.19.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.19.el6.noarch
 * ovirt-engine-setup-3.1.0-3.19.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.19.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch

Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'ovirt-engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute
'ovirt-engine-upgrade --force-current-setup-rpm'.
[root@ovirt ~]# rpm -q ovirt-engine-setup
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64

Is there a proper way to recover from t

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-13 Thread Itamar Heim 

On 08/13/2012 07:06 PM, Neil wrote:

Hi Itamar,

Apologies for the late reply in coming back to you, below are the
details you requested.

On Fri, Aug 10, 2012 at 12:28 AM, Itamar Heim  wrote:

On 08/08/2012 01:04 PM, Neil wrote:


Hi everyone,

Sorry to re-post this, just not sure what to try next.

- Original Message -


On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
wrote:


you need to run the upgrade script since the setup locks the rpm's
to make
sure the code isn't updated without updating the db in sync



ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64


After running... "engine-upgrade --force-current-setup-rpm
--no-yum-rollback"
The upgrade goes through and completes, however at the end if I check
my rpm versions they are all still the same as what they were, as
above.
Seems like the script isn't picking up the later versions available in
the dre repo, I have also updated to the latest dre repo as well just
in case.



and without the force-current-setup?


I get the following...
12 Updates available:
  * ovirt-engine-3.1.0-3.16.el6.noarch
  * ovirt-engine-backend-3.1.0-3.16.el6.noarch
  * ovirt-engine-config-3.1.0-3.16.el6.noarch
  * ovirt-engine-dbscripts-3.1.0-3.16.el6.noarch
  * ovirt-engine-genericapi-3.1.0-3.16.el6.noarch
  * ovirt-engine-notification-service-3.1.0-3.16.el6.noarch
  * ovirt-engine-restapi-3.1.0-3.16.el6.noarch
  * ovirt-engine-setup-3.1.0-3.16.el6.noarch
  * ovirt-engine-tools-common-3.1.0-3.16.el6.noarch
  * ovirt-engine-userportal-3.1.0-3.16.el6.noarch
  * ovirt-engine-webadmin-portal-3.1.0-3.16.el6.noarch
  * vdsm-bootstrap-4.10.0-0.283.13.el6.noarch

Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute 'engine-upgrade
--force-current-setup-rpm'.


are the .x86_64 rpms the ones installed?


Yes


install log?


cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_13_17_48_44.log
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB host value
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB port value
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB admin value
2012-08-13 17:48:44::INFO::dellsysid::23::trace.libsmbios_c._common::
ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x15c91f0>, (), )
2012-08-13 17:48:44::INFO::_common::55::trace.libsmbios_c._common::
RAN CTYPES FUNCTION: sysinfo_get_dell_system_id
2012-08-13 17:48:44::INFO::_common::54::trace.libsmbios_c._common::
LEAVE _errorOnZeroFN --> 565

2012-08-13 17:48:44::DEBUG::engine-upgrade::290::root:: Yum list updates started
2012-08-13 17:48:44::DEBUG::engine-upgrade::261::root:: Yum unlock started
2012-08-13 17:48:44::DEBUG::engine-upgrade::273::root:: Yum unlock
completed successfully
2012-08-13 17:48:44::DEBUG::engine-upgrade::296::root:: Getting list
of packages to upgrade
2012-08-13 18:00:14::DEBUG::engine-upgrade::248::root:: Yum lock started
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-genericapi'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:: retcode = 0
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:: retcode = 0
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-backend'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:: retcode = 0
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
co

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-13 Thread Neil 
Hi Itamar,

Apologies for the late reply in coming back to you, below are the
details you requested.

On Fri, Aug 10, 2012 at 12:28 AM, Itamar Heim  wrote:
> On 08/08/2012 01:04 PM, Neil wrote:
>>
>> Hi everyone,
>>
>> Sorry to re-post this, just not sure what to try next.
>>
>> - Original Message -
>>>
>>> On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
>>> wrote:

 you need to run the upgrade script since the setup locks the rpm's
 to make
 sure the code isn't updated without updating the db in sync
>>
>>
>> ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
>> ovirt-engine-jbossas-1.2-2.fc16.x86_64
>> ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
>> ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
>> ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64
>>
>>
>> After running... "engine-upgrade --force-current-setup-rpm
>> --no-yum-rollback"
>> The upgrade goes through and completes, however at the end if I check
>> my rpm versions they are all still the same as what they were, as
>> above.
>> Seems like the script isn't picking up the later versions available in
>> the dre repo, I have also updated to the latest dre repo as well just
>> in case.
>
>
> and without the force-current-setup?

I get the following...
12 Updates available:
 * ovirt-engine-3.1.0-3.16.el6.noarch
 * ovirt-engine-backend-3.1.0-3.16.el6.noarch
 * ovirt-engine-config-3.1.0-3.16.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.16.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.16.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.16.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.16.el6.noarch
 * ovirt-engine-setup-3.1.0-3.16.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.16.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.16.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.16.el6.noarch
 * vdsm-bootstrap-4.10.0-0.283.13.el6.noarch

Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute 'engine-upgrade
--force-current-setup-rpm'.

> are the .x86_64 rpms the ones installed?

Yes

> install log?

cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_13_17_48_44.log
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB host value
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB port value
2012-08-13 17:48:44::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB admin value
2012-08-13 17:48:44::INFO::dellsysid::23::trace.libsmbios_c._common::
ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x15c91f0>, (), )
2012-08-13 17:48:44::INFO::_common::55::trace.libsmbios_c._common::
RAN CTYPES FUNCTION: sysinfo_get_dell_system_id
2012-08-13 17:48:44::INFO::_common::54::trace.libsmbios_c._common::
LEAVE _errorOnZeroFN --> 565

2012-08-13 17:48:44::DEBUG::engine-upgrade::290::root:: Yum list updates started
2012-08-13 17:48:44::DEBUG::engine-upgrade::261::root:: Yum unlock started
2012-08-13 17:48:44::DEBUG::engine-upgrade::273::root:: Yum unlock
completed successfully
2012-08-13 17:48:44::DEBUG::engine-upgrade::296::root:: Getting list
of packages to upgrade
2012-08-13 18:00:14::DEBUG::engine-upgrade::248::root:: Yum lock started
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-genericapi'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:: retcode = 0
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:: retcode = 0
2012-08-13 18:00:14::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-backend'
2012-08-13 18:00:14::DEBUG::common_utils::335::root:: output =
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64

2012-08-13 18:00:14::DEBUG::common_utils::336::root:: stderr =
2012-08-13 18:00:14::DEBUG::common_utils::337::root:

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-09 Thread Itamar Heim 

On 08/08/2012 01:04 PM, Neil wrote:

Hi everyone,

Sorry to re-post this, just not sure what to try next.

- Original Message -

On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
wrote:

you need to run the upgrade script since the setup locks the rpm's
to make
sure the code isn't updated without updating the db in sync


ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64


After running... "engine-upgrade --force-current-setup-rpm --no-yum-rollback"
The upgrade goes through and completes, however at the end if I check
my rpm versions they are all still the same as what they were, as
above.
Seems like the script isn't picking up the later versions available in
the dre repo, I have also updated to the latest dre repo as well just
in case.


and without the force-current-setup?
are the .x86_64 rpms the ones installed?
install log?



On a side note, during the upgrade script it says at the end,
"starting jboss-as..." and the script never completes. Only if I then
re-log in with another SSH session and restart the jboss-as service
does the upgrade script continue and complete, not sure if this is
perhaps a bug that's already been fixed in later versions? Not
critical though.

Thanks, any assistance is greatly appreciated.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-08 Thread Neil 
Hi everyone,

Sorry to re-post this, just not sure what to try next.

- Original Message -
> On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
> wrote:
> > you need to run the upgrade script since the setup locks the rpm's
> > to make
> > sure the code isn't updated without updating the db in sync

ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64


After running... "engine-upgrade --force-current-setup-rpm --no-yum-rollback"
The upgrade goes through and completes, however at the end if I check
my rpm versions they are all still the same as what they were, as
above.
Seems like the script isn't picking up the later versions available in
the dre repo, I have also updated to the latest dre repo as well just
in case.

On a side note, during the upgrade script it says at the end,
"starting jboss-as..." and the script never completes. Only if I then
re-log in with another SSH session and restart the jboss-as service
does the upgrade script continue and complete, not sure if this is
perhaps a bug that's already been fixed in later versions? Not
critical though.

Thanks, any assistance is greatly appreciated.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-06 Thread Neil 
On Mon, Aug 6, 2012 at 3:07 PM, Neil  wrote:
> Hi guys,
>
> I've finally got round to running the engine-upgrade and it seems I've
> encountered an issue...
>
> On Thu, Aug 2, 2012 at 10:45 PM, Justin Clift  wrote:
>> On 02/08/2012, at 4:47 PM, Neil wrote:
>> 
>>> We are running mission critical VM's on the install, so I can't risk
>>> something going wrong and the VM's stop running or access to them is
>>> lost.
>>
>> Ouch. :(
>>
>> I'm not all that in depth with oVirt, but do mess around with it a
>> bit for compatibility testing with Aeolus (a different project).
>>
>> From what I've seen so far, oVirt 3.0 is pretty stable, and I'd be
>> comfortable running VM's on that.
>>
>> oVirt 3.1 though... doesn't seem all that stable yet.  Wouldn't
>> (personally) dare running anything even close to important on it.
>>
>> Hope you figure out a way to make things work. :)
>>
>> Regards and best wishes,
>>
>> Justin Clift
>>
>> --
>> Aeolus Community Manager
>> http://www.aeolusproject.org
>>
>
>
> After eventually running "engine-upgrade --force-current-setup-rpm
> --no-yum-rollback" the upgrade script seems to have stopped at...
>
> Backing Up Database...   [ DONE ]
> Rename Database...   [ DONE ]
> Updating rpms... [ DONE ]
> Updating Database... [ DONE ]
> Restore Database name... [ DONE ]
> Running post install configuration...[ DONE ]
> Starting JBoss...
>
>
> Below is the log upgrade log.
>
> cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_06_14_41_17.log
> 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
> pgpass file, fetching DB host value
> 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
> pgpass file, fetching DB port value
> 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
> pgpass file, fetching DB admin value
> 2012-08-06 14:41:17::INFO::dellsysid::23::trace.libsmbios_c._common::
> ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x140c1f0>, (), )
> 2012-08-06 14:41:17::INFO::_common::55::trace.libsmbios_c._common::
> RAN CTYPES FUNCTION: sysinfo_get_dell_system_id
> 2012-08-06 14:41:17::INFO::_common::54::trace.libsmbios_c._common::
> LEAVE _errorOnZeroFN --> 565
>
> 2012-08-06 14:41:18::DEBUG::engine-upgrade::290::root:: Yum list updates 
> started
> 2012-08-06 14:41:18::DEBUG::engine-upgrade::261::root:: Yum unlock started
> 2012-08-06 14:41:18::DEBUG::engine-upgrade::273::root:: Yum unlock
> completed successfully
> 2012-08-06 14:41:18::DEBUG::engine-upgrade::296::root:: Getting list
> of packages to upgrade
> 2012-08-06 14:42:39::DEBUG::engine-upgrade::248::root:: Yum lock started
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine-genericapi'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine-backend'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine-jboss-deps'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine-webadmin-portal'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
> 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
> command --> '/bin/rpm -q ovirt-engine-userportal'
> 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
> ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
>
> 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
> 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode =

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-06 Thread Neil 
Hi guys,

I've finally got round to running the engine-upgrade and it seems I've
encountered an issue...

On Thu, Aug 2, 2012 at 10:45 PM, Justin Clift  wrote:
> On 02/08/2012, at 4:47 PM, Neil wrote:
> 
>> We are running mission critical VM's on the install, so I can't risk
>> something going wrong and the VM's stop running or access to them is
>> lost.
>
> Ouch. :(
>
> I'm not all that in depth with oVirt, but do mess around with it a
> bit for compatibility testing with Aeolus (a different project).
>
> From what I've seen so far, oVirt 3.0 is pretty stable, and I'd be
> comfortable running VM's on that.
>
> oVirt 3.1 though... doesn't seem all that stable yet.  Wouldn't
> (personally) dare running anything even close to important on it.
>
> Hope you figure out a way to make things work. :)
>
> Regards and best wishes,
>
> Justin Clift
>
> --
> Aeolus Community Manager
> http://www.aeolusproject.org
>


After eventually running "engine-upgrade --force-current-setup-rpm
--no-yum-rollback" the upgrade script seems to have stopped at...

Backing Up Database...   [ DONE ]
Rename Database...   [ DONE ]
Updating rpms... [ DONE ]
Updating Database... [ DONE ]
Restore Database name... [ DONE ]
Running post install configuration...[ DONE ]
Starting JBoss...


Below is the log upgrade log.

cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_06_14_41_17.log
2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB host value
2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB port value
2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing
pgpass file, fetching DB admin value
2012-08-06 14:41:17::INFO::dellsysid::23::trace.libsmbios_c._common::
ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x140c1f0>, (), )
2012-08-06 14:41:17::INFO::_common::55::trace.libsmbios_c._common::
RAN CTYPES FUNCTION: sysinfo_get_dell_system_id
2012-08-06 14:41:17::INFO::_common::54::trace.libsmbios_c._common::
LEAVE _errorOnZeroFN --> 565

2012-08-06 14:41:18::DEBUG::engine-upgrade::290::root:: Yum list updates started
2012-08-06 14:41:18::DEBUG::engine-upgrade::261::root:: Yum unlock started
2012-08-06 14:41:18::DEBUG::engine-upgrade::273::root:: Yum unlock
completed successfully
2012-08-06 14:41:18::DEBUG::engine-upgrade::296::root:: Getting list
of packages to upgrade
2012-08-06 14:42:39::DEBUG::engine-upgrade::248::root:: Yum lock started
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-genericapi'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-backend'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-jboss-deps'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-webadmin-portal'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-userportal'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64

2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr =
2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0
2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing
command --> '/bin/rpm -q ovirt-engine-restapi'
2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output =
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64

2012-0

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-02 Thread Itamar Heim 

On 08/02/2012 09:47 AM, Neil wrote:

Hi guys,

Thank you very much for all your input and assistance.


On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
wrote:

it seems that you're using a very old 3.1 build, which we never released
during the beta process (afair).

this build is a x86_64 build, which confuses the upgrade script (since new
rpms are noarch).

I can't guarantee it will work fine (although I can't think of any reason it
won't), but using the --force-setup... parameter is a good option.

Actually, we already fixed this bug upstream, but I'm not sure it will get
into 3.1.


I'll try the --force-setup today if I get a chance, in a worst case
scenario what could go wrong?
When I run the upgrade will it create a DB backup that can be manually
restored if I have to remove all ovirt-engine packages and start from
scratch?
Anyone have some steps on how to go about restoring from the backup
that the "engine-upgrade --force-setup" creates?

Currently I'm running a two node/hypervisor setup with a SAN as my
data storage, but I can't migrate VM's between the nodes due to what
appears to be a bug, which is the reason for wanting to update the
ovirt-engine. As previously mentioned my engine is installed directly
on one of the nodes/hypervisors.


though not directly related, that's not helping...



Would it perhaps be a better idea to install a new ovirt-engine onto a
different server and then migrate to the new engine rather than
updating the current one, or am I just being completely paranoid?

We are running mission critical VM's on the install, so I can't risk
something going wrong and the VM's stop running or access to them is
lost.


upgrade wasn't tested thourougly in these versions.
installing a new environment and moving VMs to it would be safer, but it 
will require you to have more nodes, and stop/export/import/launch your VMs.




Thank you very much.

Regards.

Neil Wilson
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Neil 
Hi guys,

Thank you very much for all your input and assistance.

> On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
> wrote:
>
> it seems that you're using a very old 3.1 build, which we never released
> during the beta process (afair).
>
> this build is a x86_64 build, which confuses the upgrade script (since new
> rpms are noarch).
>
> I can't guarantee it will work fine (although I can't think of any reason it
> won't), but using the --force-setup... parameter is a good option.
>
> Actually, we already fixed this bug upstream, but I'm not sure it will get
> into 3.1.

I'll try the --force-setup today if I get a chance, in a worst case
scenario what could go wrong?
When I run the upgrade will it create a DB backup that can be manually
restored if I have to remove all ovirt-engine packages and start from
scratch?
Anyone have some steps on how to go about restoring from the backup
that the "engine-upgrade --force-setup" creates?

Currently I'm running a two node/hypervisor setup with a SAN as my
data storage, but I can't migrate VM's between the nodes due to what
appears to be a bug, which is the reason for wanting to update the
ovirt-engine. As previously mentioned my engine is installed directly
on one of the nodes/hypervisors.

Would it perhaps be a better idea to install a new ovirt-engine onto a
different server and then migrate to the new engine rather than
updating the current one, or am I just being completely paranoid?

We are running mission critical VM's on the install, so I can't risk
something going wrong and the VM's stop running or access to them is
lost.

Thank you very much.

Regards.

Neil Wilson
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Robert Middleswarth 
That is actually the same as beta1.  Or the same version used on testing 
day.  To upgrade You have to.


Yum Remove ovirt-engine vdsm

After all the packages are installed.  Make sure you are using his the 
3.1 repo and not the devel one that is based on master but hasn't been 
updated recently.


Yum install ovirt-engine

Run the engine-upgrade and it should give you should tell you something 
about the version being the same but force-upgrade the setup.


Thanks
Robert


On 08/01/2012 03:11 PM, Ofer Schreiber wrote:

Once again- you have an unsupported version of ovirt-engine.

The reason engine-upgrade doesn't work is that 3.1.0_0001-1> 3.1.0-2



On 1 Aug 2012, at 21:32, Trey Dockendorf > wrote:


On Wed, Aug 1, 2012 at 10:17 AM, Ofer Schreiber > wrote:



- Original Message -

Hi all,

Thanks for coming back to me Ofer.

On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
mailto:oschr...@redhat.com>>

wrote:

can you please attach the log file?
(/var/log/ovirt-engine/engine-upgrade-DATE.log)


Attached is the log as requested.


it seems that you're using a very old 3.1 build, which we never 
released during the beta process (afair).
this build is a x86_64 build, which confuses the upgrade script 
(since new rpms are noarch).


I can't guarantee it will work fine (although I can't think of any 
reason it won't), but using the --force-setup... parameter is a good 
option.


Actually, we already fixed this bug upstream, but I'm not sure it 
will get into 3.1.





Much appreciated.

Regards.

Neil Wilson.


___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users



After seeing this thread I decided to attempt to reproduce the errors
and see if I could get my same version to upgrade...

This is what I have installed now,

# rpm -qa ovirt*
ovirt-engine-userportal-3.1.0_0001-1.8.el6.noarch
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.noarch
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.noarch
ovirt-engine-cli-3.1.0.2-1alpha.el6.noarch
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-log-collector-3.1.0-11alpha.el6.noarch
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.noarch
ovirt-engine-config-3.1.0_0001-1.8.el6.noarch
ovirt-engine-setup-3.1.0_0001-1.8.el6.noarch
ovirt-engine-backend-3.1.0_0001-1.8.el6.noarch
ovirt-engine-3.1.0_0001-1.8.el6.noarch
ovirt-iso-uploader-3.1.0-11alpha.el6.noarch
ovirt-image-uploader-3.1.0-11alpha.el6.noarch
ovirt-engine-jbossas711-1-0.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.noarch
ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.noarch
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.noarch

However when I run engine-check-upgrade no updates are found


# engine-check-update
Loaded plugins: fastestmirror, priorities, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net 
* epel: mirror.unl.edu 
* extras: dallas.tx.mirror.xygenhosting.com
* updates: mirrors.liquidweb.com 
No updates available

What's strange is if I disable the versionlock plugin and check
updates in yum , I only see 2 ovirt related items

# yum --disableplugin=versionlock check-update
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net 
* epel: mirror.unl.edu 
* extras: dallas.tx.mirror.xygenhosting.com
* updates: mirrors.liquidweb.com 


ovirt-engine-cli.noarch
   3.1.0.6-1.el6

  ovirt-dre
ovirt-engine-sdk.noarch
   3.1.0.4-1.el6

  ovirt-dre


Have already done a 'yum clean all', and ensured my repo files match
those posted on the website.  Any tips on how to do an upgrade?

Thanks
- Trey



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Thanks
Robert Middleswarth
@rmiddle (twitter/IRC)

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Ofer Schreiber 
Once again- you have an unsupported version of ovirt-engine.

The reason engine-upgrade doesn't work is that 3.1.0_0001-1> 3.1.0-2



On 1 Aug 2012, at 21:32, Trey Dockendorf  wrote:

> On Wed, Aug 1, 2012 at 10:17 AM, Ofer Schreiber  wrote:
>> 
>> 
>> - Original Message -
>>> Hi all,
>>> 
>>> Thanks for coming back to me Ofer.
>>> 
>>> On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
>>> wrote:
 can you please attach the log file?
 (/var/log/ovirt-engine/engine-upgrade-DATE.log)
>>> 
>>> Attached is the log as requested.
>> 
>> it seems that you're using a very old 3.1 build, which we never released 
>> during the beta process (afair).
>> this build is a x86_64 build, which confuses the upgrade script (since new 
>> rpms are noarch).
>> 
>> I can't guarantee it will work fine (although I can't think of any reason it 
>> won't), but using the --force-setup... parameter is a good option.
>> 
>> Actually, we already fixed this bug upstream, but I'm not sure it will get 
>> into 3.1.
>> 
>> 
>>> 
>>> Much appreciated.
>>> 
>>> Regards.
>>> 
>>> Neil Wilson.
>>> 
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> After seeing this thread I decided to attempt to reproduce the errors
> and see if I could get my same version to upgrade...
> 
> This is what I have installed now,
> 
> # rpm -qa ovirt*
> ovirt-engine-userportal-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-tools-common-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-genericapi-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-cli-3.1.0.2-1alpha.el6.noarch
> ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
> ovirt-log-collector-3.1.0-11alpha.el6.noarch
> ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-config-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-setup-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-backend-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-3.1.0_0001-1.8.el6.noarch
> ovirt-iso-uploader-3.1.0-11alpha.el6.noarch
> ovirt-image-uploader-3.1.0-11alpha.el6.noarch
> ovirt-engine-jbossas711-1-0.x86_64
> ovirt-engine-restapi-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.noarch
> ovirt-engine-notification-service-3.1.0_0001-1.8.el6.noarch
> 
> However when I run engine-check-upgrade no updates are found
> 
> 
> # engine-check-update
> Loaded plugins: fastestmirror, priorities, versionlock
> Checking for updates... (This may take several minutes)
> Loading mirror speeds from cached hostfile
> * base: centos.mirror.lstn.net
> * epel: mirror.unl.edu
> * extras: dallas.tx.mirror.xygenhosting.com
> * updates: mirrors.liquidweb.com
> No updates available
> 
> What's strange is if I disable the versionlock plugin and check
> updates in yum , I only see 2 ovirt related items
> 
> # yum --disableplugin=versionlock check-update
> Loaded plugins: fastestmirror, priorities
> Loading mirror speeds from cached hostfile
> * base: centos.mirror.lstn.net
> * epel: mirror.unl.edu
> * extras: dallas.tx.mirror.xygenhosting.com
> * updates: mirrors.liquidweb.com
> 
> 
> ovirt-engine-cli.noarch
>3.1.0.6-1.el6
> 
>   ovirt-dre
> ovirt-engine-sdk.noarch
>3.1.0.4-1.el6
> 
>   ovirt-dre
> 
> 
> Have already done a 'yum clean all', and ensured my repo files match
> those posted on the website.  Any tips on how to do an upgrade?
> 
> Thanks
> - Trey
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Trey Dockendorf 
On Wed, Aug 1, 2012 at 10:17 AM, Ofer Schreiber  wrote:
>
>
> - Original Message -
>> Hi all,
>>
>> Thanks for coming back to me Ofer.
>>
>> On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
>> wrote:
>> > can you please attach the log file?
>> > (/var/log/ovirt-engine/engine-upgrade-DATE.log)
>>
>> Attached is the log as requested.
>
> it seems that you're using a very old 3.1 build, which we never released 
> during the beta process (afair).
> this build is a x86_64 build, which confuses the upgrade script (since new 
> rpms are noarch).
>
> I can't guarantee it will work fine (although I can't think of any reason it 
> won't), but using the --force-setup... parameter is a good option.
>
> Actually, we already fixed this bug upstream, but I'm not sure it will get 
> into 3.1.
>
>
>>
>> Much appreciated.
>>
>> Regards.
>>
>> Neil Wilson.
>>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


After seeing this thread I decided to attempt to reproduce the errors
and see if I could get my same version to upgrade...

This is what I have installed now,

# rpm -qa ovirt*
ovirt-engine-userportal-3.1.0_0001-1.8.el6.noarch
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.noarch
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.noarch
ovirt-engine-cli-3.1.0.2-1alpha.el6.noarch
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-log-collector-3.1.0-11alpha.el6.noarch
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.noarch
ovirt-engine-config-3.1.0_0001-1.8.el6.noarch
ovirt-engine-setup-3.1.0_0001-1.8.el6.noarch
ovirt-engine-backend-3.1.0_0001-1.8.el6.noarch
ovirt-engine-3.1.0_0001-1.8.el6.noarch
ovirt-iso-uploader-3.1.0-11alpha.el6.noarch
ovirt-image-uploader-3.1.0-11alpha.el6.noarch
ovirt-engine-jbossas711-1-0.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.noarch
ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.noarch
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.noarch

However when I run engine-check-upgrade no updates are found


# engine-check-update
Loaded plugins: fastestmirror, priorities, versionlock
Checking for updates... (This may take several minutes)
Loading mirror speeds from cached hostfile
 * base: centos.mirror.lstn.net
 * epel: mirror.unl.edu
 * extras: dallas.tx.mirror.xygenhosting.com
 * updates: mirrors.liquidweb.com
No updates available

What's strange is if I disable the versionlock plugin and check
updates in yum , I only see 2 ovirt related items

# yum --disableplugin=versionlock check-update
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
 * base: centos.mirror.lstn.net
 * epel: mirror.unl.edu
 * extras: dallas.tx.mirror.xygenhosting.com
 * updates: mirrors.liquidweb.com


ovirt-engine-cli.noarch
3.1.0.6-1.el6

   ovirt-dre
ovirt-engine-sdk.noarch
3.1.0.4-1.el6

   ovirt-dre


Have already done a 'yum clean all', and ensured my repo files match
those posted on the website.  Any tips on how to do an upgrade?

Thanks
- Trey
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Ofer Schreiber 


- Original Message -
> Hi all,
> 
> Thanks for coming back to me Ofer.
> 
> On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber 
> wrote:
> > can you please attach the log file?
> > (/var/log/ovirt-engine/engine-upgrade-DATE.log)
> 
> Attached is the log as requested.

it seems that you're using a very old 3.1 build, which we never released during 
the beta process (afair).
this build is a x86_64 build, which confuses the upgrade script (since new rpms 
are noarch).

I can't guarantee it will work fine (although I can't think of any reason it 
won't), but using the --force-setup... parameter is a good option.

Actually, we already fixed this bug upstream, but I'm not sure it will get into 
3.1.


> 
> Much appreciated.
> 
> Regards.
> 
> Neil Wilson.
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-08-01 Thread Neil 
Hi all,

Thanks for coming back to me Ofer.

On Tue, Jul 31, 2012 at 5:48 PM, Ofer Schreiber  wrote:
> can you please attach the log file? 
> (/var/log/ovirt-engine/engine-upgrade-DATE.log)

Attached is the log as requested.

Much appreciated.

Regards.

Neil Wilson.
[root@node02 ~]# cat 
/var/log/ovirt-engine/ovirt-engine-upgrade_2012_07_31_17_19_35.log
2012-07-31 17:19:35::DEBUG::common_utils::576::root:: found existing pgpass 
file, fetching DB host value
2012-07-31 17:19:35::DEBUG::common_utils::576::root:: found existing pgpass 
file, fetching DB port value
2012-07-31 17:19:35::DEBUG::common_utils::576::root:: found existing pgpass 
file, fetching DB admin value
2012-07-31 17:19:36::INFO::dellsysid::23::trace.libsmbios_c._common:: ENTER 
_errorOnZeroFN(565, <_FuncPtr object at 0x29f81f0>, (), )
2012-07-31 17:19:36::INFO::_common::55::trace.libsmbios_c._common:: RAN CTYPES 
FUNCTION: sysinfo_get_dell_system_id
2012-07-31 17:19:36::INFO::_common::54::trace.libsmbios_c._common:: LEAVE 
_errorOnZeroFN --> 565

2012-07-31 17:19:36::DEBUG::engine-upgrade::290::root:: Yum list updates started
2012-07-31 17:19:36::DEBUG::engine-upgrade::261::root:: Yum unlock started
2012-07-31 17:19:36::DEBUG::engine-upgrade::273::root:: Yum unlock completed 
successfully
2012-07-31 17:19:36::DEBUG::engine-upgrade::296::root:: Getting list of 
packages to upgrade
2012-07-31 17:24:18::DEBUG::engine-upgrade::248::root:: Yum lock started
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-genericapi'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-backend'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-jboss-deps'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-webadmin-portal'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-userportal'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-restapi'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-config'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-tools-common'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::337::root:: retcode = 0
2012-07-31 17:24:18::DEBUG::common_utils::309::root:: Executing command --> 
'/bin/rpm -q ovirt-engine-notification-service'
2012-07-31 17:24:18::DEBUG::common_utils::335::root:: output = 
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64

2012-07-31 17:24:18::DEBUG::common_utils::336::root:: stderr =
2012-07-31 17:24:18::DEBUG::common_utils::3

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Ofer Schreiber 
can you please attach the log file? 
(/var/log/ovirt-engine/engine-upgrade-DATE.log)

- Original Message -
> On Tue, Jul 31, 2012 at 1:55 PM, Ofer Schreiber 
> wrote:
> 
> 
> >> you need to run the upgrade script since the setup locks the rpm's
> >> to
> >> make sure the code isn't updated without updating the db in sync
> >
> > we're using yum versionlock in order to prevent unintended
> > upgrades.
> > just run engine-upgrade.
> >
> 
> Hi again,
> 
> When running engine-upgrade I received the following message...
> 
> 12 Updates available:
>  * ovirt-engine-3.1.0-3.15.el6.noarch
>  * ovirt-engine-backend-3.1.0-3.15.el6.noarch
>  * ovirt-engine-config-3.1.0-3.15.el6.noarch
>  * ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch
>  * ovirt-engine-genericapi-3.1.0-3.15.el6.noarch
>  * ovirt-engine-notification-service-3.1.0-3.15.el6.noarch
>  * ovirt-engine-restapi-3.1.0-3.15.el6.noarch
>  * ovirt-engine-setup-3.1.0-3.15.el6.noarch
>  * ovirt-engine-tools-common-3.1.0-3.15.el6.noarch
>  * ovirt-engine-userportal-3.1.0-3.15.el6.noarch
>  * ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch
>  * vdsm-bootstrap-4.10.0-0.191.9.el6.noarch
> Error: New ovirt-engine-setup rpm available via yum.
> Please execute `yum update ovirt-engine-setup`, then re-execute
> 'engine-upgrade'.
> To use the current ovirt-engine-setup rpm, execute 'engine-upgrade
> --force-current-setup-rpm'.
> 
> ...I tried running yum update ovirt-engine-setup as it said, but this
> finds no package to upgrade, should I try running the 'engine-upgrade
> --force-current-setup-rpm' or is there something else I should rather
> do?
> 
> Any thoughts on this?
> 
> Thanks again.
> 
> Regards.
> 
> Neil Wilson.
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Neil 
On Tue, Jul 31, 2012 at 1:55 PM, Ofer Schreiber  wrote:


>> you need to run the upgrade script since the setup locks the rpm's to
>> make sure the code isn't updated without updating the db in sync
>
> we're using yum versionlock in order to prevent unintended upgrades.
> just run engine-upgrade.
>

Hi again,

When running engine-upgrade I received the following message...

12 Updates available:
 * ovirt-engine-3.1.0-3.15.el6.noarch
 * ovirt-engine-backend-3.1.0-3.15.el6.noarch
 * ovirt-engine-config-3.1.0-3.15.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.15.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.15.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.15.el6.noarch
 * ovirt-engine-setup-3.1.0-3.15.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.15.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.15.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch
 * vdsm-bootstrap-4.10.0-0.191.9.el6.noarch
Error: New ovirt-engine-setup rpm available via yum.
Please execute `yum update ovirt-engine-setup`, then re-execute
'engine-upgrade'.
To use the current ovirt-engine-setup rpm, execute 'engine-upgrade
--force-current-setup-rpm'.

...I tried running yum update ovirt-engine-setup as it said, but this
finds no package to upgrade, should I try running the 'engine-upgrade
--force-current-setup-rpm' or is there something else I should rather
do?

Any thoughts on this?

Thanks again.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Robert Middleswarth 

On 07/31/2012 08:17 AM, Ofer Schreiber wrote:


- Original Message -

On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
wrote:


you need to run the upgrade script since the setup locks the rpm's
to make
sure the code isn't updated without updating the db in sync

Thanks Itamar,

I see after running engine-check-update I get..

12 Updates available:
  * ovirt-engine-3.1.0-3.15.el6.noarch
  * ovirt-engine-backend-3.1.0-3.15.el6.noarch
  * ovirt-engine-config-3.1.0-3.15.el6.noarch
  * ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch
  * ovirt-engine-genericapi-3.1.0-3.15.el6.noarch
  * ovirt-engine-notification-service-3.1.0-3.15.el6.noarch
  * ovirt-engine-restapi-3.1.0-3.15.el6.noarch
  * ovirt-engine-setup-3.1.0-3.15.el6.noarch
  * ovirt-engine-tools-common-3.1.0-3.15.el6.noarch
  * ovirt-engine-userportal-3.1.0-3.15.el6.noarch
  * ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch
  * vdsm-bootstrap-4.10.0-0.191.9.el6.noarch

Can this update be done on a live system with multiple hosts running?

yes.


I'm currently running the engine on one of the nodes, which I know
isn't ideal.
I've searched a bit regarding the upgrade procedures from 3.1 to 3.1,
does the DB need backing up, are there any wiki pages on the correct
steps?

The upgrade should work fine between 3.1 to 3.1, although we never tested it.
the upgrade utility backup the entire DB before starting, feel free to backup 
the host before that, since you'll probably be the first to try 
it.recommandedrecommanded
I have used it several times.  The 1st time I tired it failed badly but 
I upgrade the wrong way.  AKA I uninstalled the old packages and 
installed new once when the format of the packages changed.  However 
since then I have done upgrade using engine-upgrade twice without issue.



Thanks very much.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Thanks
Robert Middleswarth
@rmiddle (twitter/IRC)

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Ofer Schreiber 


- Original Message -
> On Tue, Jul 31, 2012 at 2:17 PM, Ofer Schreiber 
> wrote:
> 
> > The upgrade should work fine between 3.1 to 3.1, although we never
> > tested it.
> > the upgrade utility backup the entire DB before starting, feel free
> > to backup the host before that, since you'll probably be the first
> > to > try it.
> 
> 
> Thank you Ofer,
> 
> I'm not sure what you mean by "...to backup the host before that."
>  in
> what way should I backup the host, and what do you refer to when you
> say host?

iiuc, the engine is inside a vm, so a simple disk snapshot would be optimal.
if not - any other method of backing up the host in which the engine is 
installed is enough (lvm snapshot for example).
You can backup only the db - it's just a matter of how critical is your 
environment (and the ease of revert)

> 
> Thank you, my apologies for the confusion.
> 
> Regards.
> 
> Neil Wilson.
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Neil 
On Tue, Jul 31, 2012 at 2:17 PM, Ofer Schreiber  wrote:

> The upgrade should work fine between 3.1 to 3.1, although we never tested it.
> the upgrade utility backup the entire DB before starting, feel free to backup 
> the host before that, since you'll probably be the first to > try it.


Thank you Ofer,

I'm not sure what you mean by "...to backup the host before that."  in
what way should I backup the host, and what do you refer to when you
say host?

Thank you, my apologies for the confusion.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Ofer Schreiber 


- Original Message -
> On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim 
> wrote:
> 
> > you need to run the upgrade script since the setup locks the rpm's
> > to make
> > sure the code isn't updated without updating the db in sync
> 
> Thanks Itamar,
> 
> I see after running engine-check-update I get..
> 
> 12 Updates available:
>  * ovirt-engine-3.1.0-3.15.el6.noarch
>  * ovirt-engine-backend-3.1.0-3.15.el6.noarch
>  * ovirt-engine-config-3.1.0-3.15.el6.noarch
>  * ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch
>  * ovirt-engine-genericapi-3.1.0-3.15.el6.noarch
>  * ovirt-engine-notification-service-3.1.0-3.15.el6.noarch
>  * ovirt-engine-restapi-3.1.0-3.15.el6.noarch
>  * ovirt-engine-setup-3.1.0-3.15.el6.noarch
>  * ovirt-engine-tools-common-3.1.0-3.15.el6.noarch
>  * ovirt-engine-userportal-3.1.0-3.15.el6.noarch
>  * ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch
>  * vdsm-bootstrap-4.10.0-0.191.9.el6.noarch
> 
> Can this update be done on a live system with multiple hosts running?

yes.

> I'm currently running the engine on one of the nodes, which I know
> isn't ideal.
> I've searched a bit regarding the upgrade procedures from 3.1 to 3.1,
> does the DB need backing up, are there any wiki pages on the correct
> steps?

The upgrade should work fine between 3.1 to 3.1, although we never tested it.
the upgrade utility backup the entire DB before starting, feel free to backup 
the host before that, since you'll probably be the first to try 
it.recommandedrecommanded

> 
> Thanks very much.
> 
> Regards.
> 
> Neil Wilson.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Neil 
On Tue, Jul 31, 2012 at 1:04 PM, Itamar Heim  wrote:

> you need to run the upgrade script since the setup locks the rpm's to make
> sure the code isn't updated without updating the db in sync

Thanks Itamar,

I see after running engine-check-update I get..

12 Updates available:
 * ovirt-engine-3.1.0-3.15.el6.noarch
 * ovirt-engine-backend-3.1.0-3.15.el6.noarch
 * ovirt-engine-config-3.1.0-3.15.el6.noarch
 * ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch
 * ovirt-engine-genericapi-3.1.0-3.15.el6.noarch
 * ovirt-engine-notification-service-3.1.0-3.15.el6.noarch
 * ovirt-engine-restapi-3.1.0-3.15.el6.noarch
 * ovirt-engine-setup-3.1.0-3.15.el6.noarch
 * ovirt-engine-tools-common-3.1.0-3.15.el6.noarch
 * ovirt-engine-userportal-3.1.0-3.15.el6.noarch
 * ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch
 * vdsm-bootstrap-4.10.0-0.191.9.el6.noarch

Can this update be done on a live system with multiple hosts running?
I'm currently running the engine on one of the nodes, which I know
isn't ideal.
I've searched a bit regarding the upgrade procedures from 3.1 to 3.1,
does the DB need backing up, are there any wiki pages on the correct
steps?

Thanks very much.

Regards.

Neil Wilson.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Ofer Schreiber 


- Original Message -
> On 07/31/2012 09:42 AM, Neil wrote:
> > Hi guys,
> >
> > I'm running an older version of ovirt-engine on Centos 6.2 and I'd
> > like to upgrade ovirt-engine and the other corresponding packages
> >
> > ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
> > ovirt-engine-jbossas-1.2-2.fc16.x86_64
> > ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
> > ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
> > ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64
> >
> > Using yum even if I do a yum update ovirt-engine* the only updates
> > I get are...
> >
> >   ovirt-engine-clinoarch
> >  3.1.0.6-1.el6  ovirt31-dre
> > 144 k
> >   ovirt-engine-sdknoarch
> >  3.1.0.4-1.el6  ovirt31-dre
> > 222 k
> >
> > and yet I can see there are newer ovirt-engine packages available
> > than
> > the ones I'm running, I've checked that the repo is enabled...
> >
> > [ovirt-dre]
> > name=oVirt engine repo
> > baseurl=http://www.dreyou.org/ovirt/ovirt-engine/
> > http://www1.dreyou.org/ovirt/ovirt-engine/
> > enabled=1
> > gpgcheck=0
> >
> > [ovirt31-dre]
> > name=oVirt 3.1 engine repo
> > baseurl=http://www.dreyou.org/ovirt/ovirt-engine31/
> > http://www1.dreyou.org/ovirt/ovirt-engine31/
> > enabled=1
> > gpgcheck=0
> >
> > ...and browsing the repo manually through a browser I see the
> > following packages under ovirt-engine31/
> >
> > ovirt-engine-3.1.0-3.11.el6.noarch.rpm
> > ovirt-engine-3.1.0-3.11.el6.src.rpm
> >
> > and under the ovirt-engine/ directory I see the following
> > versions...
> >
> > ovirt-engine-3.1.0-3.15.el6.noarch.rpm
> > ovirt-engine-3.1.0-3.15.el6.src.rpm
> >
> > Anyone have any ideas why yum won't find the newer versions?
> >
> > Thank you.
> >
> > Regards.
> >
> > Neil.
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> 
> you need to run the upgrade script since the setup locks the rpm's to
> make sure the code isn't updated without updating the db in sync

we're using yum versionlock in order to prevent unintended upgrades.
just run engine-upgrade.

> 
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Upgrading ovirt-engine from Centos dre repo

2012-07-31 Thread Itamar Heim 

On 07/31/2012 09:42 AM, Neil wrote:

Hi guys,

I'm running an older version of ovirt-engine on Centos 6.2 and I'd
like to upgrade ovirt-engine and the other corresponding packages

ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64

Using yum even if I do a yum update ovirt-engine* the only updates I get are...

  ovirt-engine-clinoarch
 3.1.0.6-1.el6  ovirt31-dre
144 k
  ovirt-engine-sdknoarch
 3.1.0.4-1.el6  ovirt31-dre
222 k

and yet I can see there are newer ovirt-engine packages available than
the ones I'm running, I've checked that the repo is enabled...

[ovirt-dre]
name=oVirt engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine/
http://www1.dreyou.org/ovirt/ovirt-engine/
enabled=1
gpgcheck=0

[ovirt31-dre]
name=oVirt 3.1 engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine31/
http://www1.dreyou.org/ovirt/ovirt-engine31/
enabled=1
gpgcheck=0

...and browsing the repo manually through a browser I see the
following packages under ovirt-engine31/

ovirt-engine-3.1.0-3.11.el6.noarch.rpm
ovirt-engine-3.1.0-3.11.el6.src.rpm

and under the ovirt-engine/ directory I see the following versions...

ovirt-engine-3.1.0-3.15.el6.noarch.rpm
ovirt-engine-3.1.0-3.15.el6.src.rpm

Anyone have any ideas why yum won't find the newer versions?

Thank you.

Regards.

Neil.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



you need to run the upgrade script since the setup locks the rpm's to 
make sure the code isn't updated without updating the db in sync


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Upgrading ovirt-engine from Centos dre repo

2012-07-30 Thread Neil 
Hi guys,

I'm running an older version of ovirt-engine on Centos 6.2 and I'd
like to upgrade ovirt-engine and the other corresponding packages

ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64

Using yum even if I do a yum update ovirt-engine* the only updates I get are...

 ovirt-engine-clinoarch
3.1.0.6-1.el6  ovirt31-dre
   144 k
 ovirt-engine-sdknoarch
3.1.0.4-1.el6  ovirt31-dre
   222 k

and yet I can see there are newer ovirt-engine packages available than
the ones I'm running, I've checked that the repo is enabled...

[ovirt-dre]
name=oVirt engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine/
http://www1.dreyou.org/ovirt/ovirt-engine/
enabled=1
gpgcheck=0

[ovirt31-dre]
name=oVirt 3.1 engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine31/
http://www1.dreyou.org/ovirt/ovirt-engine31/
enabled=1
gpgcheck=0

...and browsing the repo manually through a browser I see the
following packages under ovirt-engine31/

ovirt-engine-3.1.0-3.11.el6.noarch.rpm
ovirt-engine-3.1.0-3.11.el6.src.rpm

and under the ovirt-engine/ directory I see the following versions...

ovirt-engine-3.1.0-3.15.el6.noarch.rpm
ovirt-engine-3.1.0-3.15.el6.src.rpm

Anyone have any ideas why yum won't find the newer versions?

Thank you.

Regards.

Neil.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users