I must say, I removed the network from the host but the VM's still
have it on their nics and that is the issue and stop me from changing
the networkname. In my opinion nothing affects changing the name when
it's only on the VM and the VM is down.
I hope we can work something out on
Yes I saw it's not ideal to do this using the DB.
It would be nice if it's possible to change it if the using VM's are down.
2017-02-19 14:10 GMT+01:00 Alona Kaplan :
> Hi Matt,
> It won't work.
> The name is the key for the sync operation. So it cannot
It won't work.
The name is the key for the sync operation. So it cannot be out of sync.
If you change the name via the db (which is highly not recommended!), the
network will be considered as a new one.
You will end up (after refreshing the capabilities) with unmanaged network
OK, thanks for this, but what if I change them in the Database and
resync ? As ovirtmgmt is seperate it should be able to control the
I'm curious about that as I think that should work.
2017-02-19 10:30 GMT+01:00 Michael Burman :
> Hi again
This can't be changed.
When the network attached to host, it is used by vdsm and has a
vdsm-'network-name' which in use.
When it used by a VM, virsh using this name, so you can't change it, unless
removing and detaching the network from VM and host.
On Fri, Feb 17, 2017
OK, I just found out that it's not possible to change the network name
when the network is attached to VM's as well. I wonder why that is
because for VM's it's only DB stuff being done.
Can't this be changed ?
2017-02-16 13:58 GMT+01:00 Matt . :
OK good to know. Why would it not be possible to change the name as
well ? I think it's not that difficult in the same command ?
2017-02-16 13:54 GMT+01:00 Michael Burman :
> Hi Matt
> Are you trying to change the network's name? if this is the case, then
Are you trying to change the network's name? if this is the case, then it
doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while
it is attached to multiple hosts. I will report a bug for this issue.
I trying pro process the change the issue is that I still get the
message (with some variable bug in it) that some hosts have the
logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical
Thanks! it looks like it's what I need, checking out!
Thank you very much!
2017-02-15 7:12 GMT+01:00 Michael Burman :
> Check this feature page as well)
Check this feature page as well)
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman wrote:
> Hello Matt
> Yes, there is a way, it can be done as part of our MultiHost Network
Yes, there is a way, it can be done as part of our MultiHost Network
If you have the same logical network attached to multiple hosts in your DC,
you can update their vlan IDs via the 'Networks' main tab and this will
send a setup networks command through all of your
Is there a way to change Vlan ID's which are connected to the Hosts
when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can
perform some process which allows me to hammer my hosts with the new
vlan ID's for their bridges.
I hope someone has
Mail list logo