Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
On Fri, Jul 8, 2016 at 4:41 PM, Dewey Du wrote: > on Host-01 > > [root@localhost ~]# hostname > localhost.localdomain OK, the issue is here ^^^ Please use an uniquely resolvable hostname for your host. > on Engine VM > > [root@engine ~]# hostname > engine.ovirt.hscloud > > [root@engine ~]# engine-setup > > > --== CONFIGURATION PREVIEW ==-- > > Bridge interface : em1 > Engine FQDN: engine.ovirt.hscloud > Bridge name: ovirtmgmt > Host address : localhost.localdomain > SSH daemon port: 22 > Gateway address: 10.0.100.2 > Host name for web application : hosted_engine_1 > Storage Domain type: glusterfs > Host ID: 1 > Image size GB : 10 > GlusterFS Share Name : hosted_engine_glusterfs > GlusterFS Brick Provisioning : False > Storage connection : 10.0.100.17:/ovirt-engine > Console type : vnc > Memory size MB : 16384 > MAC address: 00:16:3e:1b:0f:e2 > Boot type : disk > Number of CPUs : 4 > OVF archive (for disk boot): > /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-3.6-20160623.1.el7.centos.ova > CPU Type : model_Haswell-noTSX > > > > On Fri, Jul 8, 2016 at 8:36 PM, Simone Tiraboschi > wrote: >> >> On Thu, Jul 7, 2016 at 5:44 PM, Dewey Du wrote: >> > "PermitRootLogin without-password" is disabled. Is this a MUST? I am >> > following the steps from the link below, and there is no steps needed to >> > enable "PermitRootLogin without-password". >> >> No, it's not. >> The engine will connect using a key deployed on the host by >> hosted-engine-setup. >> >> > >> > http://blogs-ramesh.blogspot.jp/2016/01/ovirt-and-gluster-hyperconvergence.html >> > >> > Do you have anyother instructions to setup >> > ovirt-and-gluster-hyperconvergence? >> > >> > By the way, the "localhost.localdomain" in the engine.log "Failed to >> > authenticate session with host 'hosted_engine_1': SSH authentication to >> > 'root@localhost.localdomain' failed." means the engine VM or Host-01? >> >> It means the engine and the issue is just there. >> Can you please check the hostname of your host? >> We had a bug in past about that but now hosted-engine-setup should >> refuse to deploy, which version are you using? >> >> > On Thu, Jul 7, 2016 at 4:11 PM, Ramesh Nachimuthu >> > wrote: >> >> >> >> Hi Dewey, >> >> >> >> Looks like SSH login from Engine VM to 'Host-01' is failing. Can you >> >> confirm that "PermitRootLogin without-password" is enabled on 'Host-01' >> >> where you are running " hosted-engine --deploy " >> >> >> >> >> >> Regards, >> >> Ramesh >> >> >> >> - Original Message - >> >> > From: "Dewey Du" >> >> > To: "Scott" >> >> > Cc: "users" >> >> > Sent: Thursday, July 7, 2016 1:11:14 PM >> >> > Subject: Re: [ovirt-users] Fail to setup Hyperconverged >> >> > Infrastructure >> >> > using oVirt and Gluster >> >> > >> >> > On Engine VM, the command " engine-setup " is executed successfully. >> >> > >> >> > On Host-01 which running the command " hosted-engine --deploy " >> >> > always display the following message: >> >> > >> >> > Make a selection from the options below: >> >> > (1) Continue setup - oVirt-Engine installation is ready and >> >> > ovirt-engine >> >> > service is up >> >> > (2) Abort setup >> >> > (3) Power off and restart the VM >> >> > (4) Destroy VM and abort setup >> >> > (1, 2, 3, 4)[1]: 1 >> >> > >> >> > My engine.log on Engine VM is attached below >> >> > >> >> > 2016-07-05 15:55:54,086 ERROR >> >> > [org.ovirt.engin
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
on Host-01 [root@localhost ~]# hostname localhost.localdomain on Engine VM [root@engine ~]# hostname engine.ovirt.hscloud [root@engine ~]# engine-setup --== CONFIGURATION PREVIEW ==-- Bridge interface : em1 Engine FQDN: engine.ovirt.hscloud Bridge name: ovirtmgmt * Host address : localhost.localdomain* SSH daemon port: 22 Gateway address: 10.0.100.2 Host name for web application : hosted_engine_1 Storage Domain type: glusterfs Host ID: 1 Image size GB : 10 GlusterFS Share Name : hosted_engine_glusterfs GlusterFS Brick Provisioning : False Storage connection : 10.0.100.17:/ovirt-engine Console type : vnc Memory size MB : 16384 MAC address: 00:16:3e:1b:0f:e2 Boot type : disk Number of CPUs : 4 OVF archive (for disk boot): /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-3.6-20160623.1.el7.centos.ova CPU Type : model_Haswell-noTSX On Fri, Jul 8, 2016 at 8:36 PM, Simone Tiraboschi wrote: > On Thu, Jul 7, 2016 at 5:44 PM, Dewey Du wrote: > > "PermitRootLogin without-password" is disabled. Is this a MUST? I am > > following the steps from the link below, and there is no steps needed to > > enable "PermitRootLogin without-password". > > No, it's not. > The engine will connect using a key deployed on the host by > hosted-engine-setup. > > > > http://blogs-ramesh.blogspot.jp/2016/01/ovirt-and-gluster-hyperconvergence.html > > > > Do you have anyother instructions to setup > > ovirt-and-gluster-hyperconvergence? > > > > By the way, the "localhost.localdomain" in the engine.log "Failed to > > authenticate session with host 'hosted_engine_1': SSH authentication to > > 'root@localhost.localdomain' failed." means the engine VM or Host-01? > > It means the engine and the issue is just there. > Can you please check the hostname of your host? > We had a bug in past about that but now hosted-engine-setup should > refuse to deploy, which version are you using? > > > On Thu, Jul 7, 2016 at 4:11 PM, Ramesh Nachimuthu > > wrote: > >> > >> Hi Dewey, > >> > >> Looks like SSH login from Engine VM to 'Host-01' is failing. Can you > >> confirm that "PermitRootLogin without-password" is enabled on 'Host-01' > >> where you are running " hosted-engine --deploy " > >> > >> > >> Regards, > >> Ramesh > >> > >> - Original Message - > >> > From: "Dewey Du" > >> > To: "Scott" > >> > Cc: "users" > >> > Sent: Thursday, July 7, 2016 1:11:14 PM > >> > Subject: Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure > >> > using oVirt and Gluster > >> > > >> > On Engine VM, the command " engine-setup " is executed successfully. > >> > > >> > On Host-01 which running the command " hosted-engine --deploy " > >> > always display the following message: > >> > > >> > Make a selection from the options below: > >> > (1) Continue setup - oVirt-Engine installation is ready and > ovirt-engine > >> > service is up > >> > (2) Abort setup > >> > (3) Power off and restart the VM > >> > (4) Destroy VM and abort setup > >> > (1, 2, 3, 4)[1]: 1 > >> > > >> > My engine.log on Engine VM is attached below > >> > > >> > 2016-07-05 15:55:54,086 ERROR > >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > >> > [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': > >> > SSH > >> > authentication to 'root@localhost.localdomain' failed. Please verify > >> > provided credentials. Make sure key is authorized at host > >> > 2016-07-05 15:55:54,086 WARN > >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > >> > [77e52cbc] CanDoAction of action 'AddVds' failed for user > >> > admin@internal. > >> &g
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
On Thu, Jul 7, 2016 at 5:44 PM, Dewey Du wrote: > "PermitRootLogin without-password" is disabled. Is this a MUST? I am > following the steps from the link below, and there is no steps needed to > enable "PermitRootLogin without-password". No, it's not. The engine will connect using a key deployed on the host by hosted-engine-setup. > http://blogs-ramesh.blogspot.jp/2016/01/ovirt-and-gluster-hyperconvergence.html > > Do you have anyother instructions to setup > ovirt-and-gluster-hyperconvergence? > > By the way, the "localhost.localdomain" in the engine.log "Failed to > authenticate session with host 'hosted_engine_1': SSH authentication to > 'root@localhost.localdomain' failed." means the engine VM or Host-01? It means the engine and the issue is just there. Can you please check the hostname of your host? We had a bug in past about that but now hosted-engine-setup should refuse to deploy, which version are you using? > On Thu, Jul 7, 2016 at 4:11 PM, Ramesh Nachimuthu > wrote: >> >> Hi Dewey, >> >> Looks like SSH login from Engine VM to 'Host-01' is failing. Can you >> confirm that "PermitRootLogin without-password" is enabled on 'Host-01' >> where you are running " hosted-engine --deploy " >> >> >> Regards, >> Ramesh >> >> ----- Original Message - >> > From: "Dewey Du" >> > To: "Scott" >> > Cc: "users" >> > Sent: Thursday, July 7, 2016 1:11:14 PM >> > Subject: Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure >> > using oVirt and Gluster >> > >> > On Engine VM, the command " engine-setup " is executed successfully. >> > >> > On Host-01 which running the command " hosted-engine --deploy " >> > always display the following message: >> > >> > Make a selection from the options below: >> > (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine >> > service is up >> > (2) Abort setup >> > (3) Power off and restart the VM >> > (4) Destroy VM and abort setup >> > (1, 2, 3, 4)[1]: 1 >> > >> > My engine.log on Engine VM is attached below >> > >> > 2016-07-05 15:55:54,086 ERROR >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) >> > [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': >> > SSH >> > authentication to 'root@localhost.localdomain' failed. Please verify >> > provided credentials. Make sure key is authorized at host >> > 2016-07-05 15:55:54,086 WARN >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) >> > [77e52cbc] CanDoAction of action 'AddVds' failed for user >> > admin@internal. >> > Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server >> > localhost.localdomain,VDS_CANNOT_AUTHENTICATE_TO_SERVER >> > 2016-07-05 15:55:54,098 ERROR >> > [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default >> > task-17) [] Operation Failed: [Cannot add Host. SSH authentication >> > failed, >> > verify authentication parameters are correct (Username/Password, >> > public-key >> > etc.) You may refer to the engine.log file for further details.] >> > >> > On Sun, Jul 3, 2016 at 11:27 PM, Scott < romra...@gmail.com > wrote: >> > >> > >> > >> > Do you have root logins disabled in SSH? If I remember right, oVirt will >> > use >> > SSH keys once configured so you need "PermitRootLogin without-password" >> > at a >> > minimum. >> > >> > The engine log and your auth/secure log on the host should probably give >> > you >> > some idea of what happened. >> > >> > Scott >> > >> > On Sun, Jul 3, 2016 at 10:13 AM Dewey Du < dewe...@gmail.com > wrote: >> > >> > >> > >> > oVirt 3.6 >> > >> > # hosted-engine --deploy >> > >> > [ ERROR ] Cannot automatically add the host to cluster Default: Cannot >> > add >> > Host. SSH authentication failed, verify authentication parameters are >> > correct (Username/Password, public-key etc.) You may refer to the >> > engine.log >> > file for further details. >> > >> > Has anyone encountered this issue before? Thx. >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > >> > >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
"PermitRootLogin without-password" is disabled. Is this a MUST? I am following the steps from the link below, and there is no steps needed to enable "PermitRootLogin without-password". http://blogs-ramesh.blogspot.jp/2016/01/ovirt-and-gluster-hyperconvergence.html Do you have anyother instructions to setup ovirt-and-gluster-hyperconvergence? By the way, the "localhost.localdomain" in the engine.log "Failed to authenticate session with host 'hosted_engine_1': SSH authentication to 'root@localhost.localdomain' failed." means the engine VM or Host-01? On Thu, Jul 7, 2016 at 4:11 PM, Ramesh Nachimuthu wrote: > Hi Dewey, > > Looks like SSH login from Engine VM to 'Host-01' is failing. Can you > confirm that "PermitRootLogin without-password" is enabled on 'Host-01' > where you are running " hosted-engine --deploy " > > > Regards, > Ramesh > > - Original Message ----- > > From: "Dewey Du" > > To: "Scott" > > Cc: "users" > > Sent: Thursday, July 7, 2016 1:11:14 PM > > Subject: Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure > using oVirt and Gluster > > > > On Engine VM, the command " engine-setup " is executed successfully. > > > > On Host-01 which running the command " hosted-engine --deploy " > > always display the following message: > > > > Make a selection from the options below: > > (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine > > service is up > > (2) Abort setup > > (3) Power off and restart the VM > > (4) Destroy VM and abort setup > > (1, 2, 3, 4)[1]: 1 > > > > My engine.log on Engine VM is attached below > > > > 2016-07-05 15:55:54,086 ERROR > > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > > [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': > SSH > > authentication to 'root@localhost.localdomain' failed. Please verify > > provided credentials. Make sure key is authorized at host > > 2016-07-05 15:55:54,086 WARN > > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > > [77e52cbc] CanDoAction of action 'AddVds' failed for user admin@internal. > > Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server > > localhost.localdomain,VDS_CANNOT_AUTHENTICATE_TO_SERVER > > 2016-07-05 15:55:54,098 ERROR > > [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default > > task-17) [] Operation Failed: [Cannot add Host. SSH authentication > failed, > > verify authentication parameters are correct (Username/Password, > public-key > > etc.) You may refer to the engine.log file for further details.] > > > > On Sun, Jul 3, 2016 at 11:27 PM, Scott < romra...@gmail.com > wrote: > > > > > > > > Do you have root logins disabled in SSH? If I remember right, oVirt will > use > > SSH keys once configured so you need "PermitRootLogin without-password" > at a > > minimum. > > > > The engine log and your auth/secure log on the host should probably give > you > > some idea of what happened. > > > > Scott > > > > On Sun, Jul 3, 2016 at 10:13 AM Dewey Du < dewe...@gmail.com > wrote: > > > > > > > > oVirt 3.6 > > > > # hosted-engine --deploy > > > > [ ERROR ] Cannot automatically add the host to cluster Default: Cannot > add > > Host. SSH authentication failed, verify authentication parameters are > > correct (Username/Password, public-key etc.) You may refer to the > engine.log > > file for further details. > > > > Has anyone encountered this issue before? Thx. > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
Hi Dewey, Looks like SSH login from Engine VM to 'Host-01' is failing. Can you confirm that "PermitRootLogin without-password" is enabled on 'Host-01' where you are running " hosted-engine --deploy " Regards, Ramesh - Original Message - > From: "Dewey Du" > To: "Scott" > Cc: "users" > Sent: Thursday, July 7, 2016 1:11:14 PM > Subject: Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using > oVirt and Gluster > > On Engine VM, the command " engine-setup " is executed successfully. > > On Host-01 which running the command " hosted-engine --deploy " > always display the following message: > > Make a selection from the options below: > (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine > service is up > (2) Abort setup > (3) Power off and restart the VM > (4) Destroy VM and abort setup > (1, 2, 3, 4)[1]: 1 > > My engine.log on Engine VM is attached below > > 2016-07-05 15:55:54,086 ERROR > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': SSH > authentication to 'root@localhost.localdomain' failed. Please verify > provided credentials. Make sure key is authorized at host > 2016-07-05 15:55:54,086 WARN > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > [77e52cbc] CanDoAction of action 'AddVds' failed for user admin@internal. > Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server > localhost.localdomain,VDS_CANNOT_AUTHENTICATE_TO_SERVER > 2016-07-05 15:55:54,098 ERROR > [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default > task-17) [] Operation Failed: [Cannot add Host. SSH authentication failed, > verify authentication parameters are correct (Username/Password, public-key > etc.) You may refer to the engine.log file for further details.] > > On Sun, Jul 3, 2016 at 11:27 PM, Scott < romra...@gmail.com > wrote: > > > > Do you have root logins disabled in SSH? If I remember right, oVirt will use > SSH keys once configured so you need "PermitRootLogin without-password" at a > minimum. > > The engine log and your auth/secure log on the host should probably give you > some idea of what happened. > > Scott > > On Sun, Jul 3, 2016 at 10:13 AM Dewey Du < dewe...@gmail.com > wrote: > > > > oVirt 3.6 > > # hosted-engine --deploy > > [ ERROR ] Cannot automatically add the host to cluster Default: Cannot add > Host. SSH authentication failed, verify authentication parameters are > correct (Username/Password, public-key etc.) You may refer to the engine.log > file for further details. > > Has anyone encountered this issue before? Thx. > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
On Engine VM, the command " *engine-setup *" is executed successfully. On Host-01 which running the command " *hosted-engine --deploy *" always display the following message: Make a selection from the options below: (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine service is up (2) Abort setup (3) Power off and restart the VM (4) Destroy VM and abort setup (1, 2, 3, 4)[1]: 1 My engine.log on Engine VM is attached below 2016-07-05 15:55:54,086 ERROR [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': SSH authentication to 'root@localhost.localdomain' failed. Please verify provided credentials. Make sure key is authorized at host 2016-07-05 15:55:54,086 WARN [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) [77e52cbc] CanDoAction of action 'AddVds' failed for user admin@internal. Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server localhost.localdomain,VDS_CANNOT_AUTHENTICATE_TO_SERVER 2016-07-05 15:55:54,098 ERROR [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default task-17) [] Operation Failed: [Cannot add Host. SSH authentication failed, verify authentication parameters are correct (Username/Password, public-key etc.) You may refer to the engine.log file for further details.] On Sun, Jul 3, 2016 at 11:27 PM, Scott wrote: > Do you have root logins disabled in SSH? If I remember right, oVirt will > use SSH keys once configured so you need "PermitRootLogin without-password" > at a minimum. > > The engine log and your auth/secure log on the host should probably give > you some idea of what happened. > > Scott > > On Sun, Jul 3, 2016 at 10:13 AM Dewey Du wrote: > >> oVirt 3.6 >> >> # hosted-engine --deploy >> >> [ ERROR ] Cannot automatically add the host to cluster Default: Cannot >> add Host. SSH authentication failed, verify authentication parameters are >> correct (Username/Password, public-key etc.) You may refer to the >> engine.log file for further details. >> >> Has anyone encountered this issue before? Thx. >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
Do you have root logins disabled in SSH? If I remember right, oVirt will use SSH keys once configured so you need "PermitRootLogin without-password" at a minimum. The engine log and your auth/secure log on the host should probably give you some idea of what happened. Scott On Sun, Jul 3, 2016 at 10:13 AM Dewey Du wrote: > oVirt 3.6 > > # hosted-engine --deploy > > [ ERROR ] Cannot automatically add the host to cluster Default: Cannot add > Host. SSH authentication failed, verify authentication parameters are > correct (Username/Password, public-key etc.) You may refer to the > engine.log file for further details. > > Has anyone encountered this issue before? Thx. > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Fail to setup Hyperconverged Infrastructure using oVirt and Gluster
oVirt 3.6 # hosted-engine --deploy [ ERROR ] Cannot automatically add the host to cluster Default: Cannot add Host. SSH authentication failed, verify authentication parameters are correct (Username/Password, public-key etc.) You may refer to the engine.log file for further details. Has anyone encountered this issue before? Thx. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users