Re: [ovirt-users] Glusterfs HA with Ovirt
I was never able to achieve a stable system that could survive the loss of a single node with glusterfs. I attempted to use replica 2 across 3 nodes (which required 2 bricks per node as the number of bricks must be a multiple of the replica, and you have to order them so the brick pairs span servers). I enabled server-side quorum, but found out later that client side quorum is based on 'sub volumes', which means that with a single node failure on replica 2, even though there were 3 nodes, it would go into a readonly state. After disabling client-side quorum (but keeping server side quorum) I thought the issue was fixed, but every once in a while, rebooting one of the nodes (after ensuring gluster was healed) would lead to i/o errors on the VM guest and essentially make it so it needed to be rebooted (which was successful and everything worked after even before bringing the downed node back up). My nodes were all combined glusterfs and ovirt nodes. I tried using both 'localhost' on the nodes as well as using a keepalived VIP. Its possible my issues were all due to client-side quorum not being enabled, but that would require replica 3 to be able to survive a single node failure, but I never pursued testing that theory. Also, heal times seemed a bit long for a single idle VM, it would consume 2 full cores of CPU for about 5 minutes for healing a single idle VM (granted, I was testing on a 1Gbps network, but that doesn't explain the CPU usage). -Brad On 7/4/14 1:29 AM, Andrew Lau wrote: As long as all your compute nodes are part of the gluster peer, localhost will work. Just remember, gluster will connect to any server, so even if you mount as localhost:/ it could be accessing the storage from another host in the gluster peer group. On Fri, Jul 4, 2014 at 3:26 PM, Punit Dambiwal wrote: Hi Andrew, Yes..both on the same node...but i have 4 nodes of this type in the same clusterSo it should work or not ?? 1. 4 physical nodes with 12 bricks each(distributed replicated)... 2. The same all 4 nodes use for the compute purpose also... Do i still require the VIP...or not ?? because i tested even the mount point node goes down...the VM will not pause and not affect... On Fri, Jul 4, 2014 at 1:18 PM, Andrew Lau wrote: Or just localhost as your computer and storage are on the same box. On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal wrote: Hi Andrew, Thanks for the updatethat means HA can not work without VIP in the gluster,so better to use the glusterfs with the VIP to take over the ip...in case of any storage node failure... On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau wrote: Don't forget to take into consideration quroum, that's something people often forget The reason you're having the current happen, is gluster only uses the initial IP address to get the volume details. After that it'll connect directly to ONE of the servers, so with your 2 storage server case, 50% chance it won't go to paused state. For the VIP, you could consider CTDB or keepelived, or even just using localhost (as your storage and compute are all on the same machine). For CTDB, checkout http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ I have a BZ open regarding gluster VMs going into paused state and not being resumable, so it's something you should also consider. My case, switch dies, gluster volume goes away, VMs go into paused state but can't be resumed. If you lose one server out of a cluster is a different story though. https://bugzilla.redhat.com/show_bug.cgi?id=1058300 HTH On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal wrote: Hi, Thanks...can you suggest me any good how to/article for the glusterfs with ovirt... One strange thing is if i will try both (compute & storage) on the same node...the below quote not happen - Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there. - Even the 10.10.10.2 goes down...i can still access the gluster mounts and no VM pausei can access the VM via ssh...no connection failure.the connection drop only in case of SPM goes down and the another node will elect as SPM(All the running VM's pause in this condition). On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic wrote: You need to setup a virtual IP to use as the mount point, most people use keepalived to provide a virtual ip via vrrp for this. Setup something like 10.10.10.10 and use that for your mounts. Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there. If the SPM goes down, it the other hypervisor hosts will elect a new one (under control of the ovirt engine). Same scenar
Re: [ovirt-users] Glusterfs HA with Ovirt
As long as all your compute nodes are part of the gluster peer, localhost will work. Just remember, gluster will connect to any server, so even if you mount as localhost:/ it could be accessing the storage from another host in the gluster peer group. On Fri, Jul 4, 2014 at 3:26 PM, Punit Dambiwal wrote: > Hi Andrew, > > Yes..both on the same node...but i have 4 nodes of this type in the same > clusterSo it should work or not ?? > > 1. 4 physical nodes with 12 bricks each(distributed replicated)... > 2. The same all 4 nodes use for the compute purpose also... > > Do i still require the VIP...or not ?? because i tested even the mount point > node goes down...the VM will not pause and not affect... > > > On Fri, Jul 4, 2014 at 1:18 PM, Andrew Lau wrote: >> >> Or just localhost as your computer and storage are on the same box. >> >> >> On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal wrote: >> > Hi Andrew, >> > >> > Thanks for the updatethat means HA can not work without VIP in the >> > gluster,so better to use the glusterfs with the VIP to take over the >> > ip...in >> > case of any storage node failure... >> > >> > >> > On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau >> > wrote: >> >> >> >> Don't forget to take into consideration quroum, that's something >> >> people often forget >> >> >> >> The reason you're having the current happen, is gluster only uses the >> >> initial IP address to get the volume details. After that it'll connect >> >> directly to ONE of the servers, so with your 2 storage server case, >> >> 50% chance it won't go to paused state. >> >> >> >> For the VIP, you could consider CTDB or keepelived, or even just using >> >> localhost (as your storage and compute are all on the same machine). >> >> For CTDB, checkout >> >> http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ >> >> >> >> I have a BZ open regarding gluster VMs going into paused state and not >> >> being resumable, so it's something you should also consider. My case, >> >> switch dies, gluster volume goes away, VMs go into paused state but >> >> can't be resumed. If you lose one server out of a cluster is a >> >> different story though. >> >> https://bugzilla.redhat.com/show_bug.cgi?id=1058300 >> >> >> >> HTH >> >> >> >> On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal >> >> wrote: >> >> > Hi, >> >> > >> >> > Thanks...can you suggest me any good how to/article for the glusterfs >> >> > with >> >> > ovirt... >> >> > >> >> > One strange thing is if i will try both (compute & storage) on the >> >> > same >> >> > node...the below quote not happen >> >> > >> >> > - >> >> > >> >> > Right now, if 10.10.10.2 goes away, all your gluster mounts go away >> >> > and >> >> > your >> >> > VMs get paused because the hypervisors can’t access the storage. Your >> >> > gluster storage is still fine, but ovirt can’t talk to it because >> >> > 10.10.10.2 >> >> > isn’t there. >> >> > - >> >> > >> >> > Even the 10.10.10.2 goes down...i can still access the gluster mounts >> >> > and no >> >> > VM pausei can access the VM via ssh...no connection >> >> > failure.the >> >> > connection drop only in case of SPM goes down and the another node >> >> > will >> >> > elect as SPM(All the running VM's pause in this condition). >> >> > >> >> > >> >> > >> >> > On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic >> >> > >> >> > wrote: >> >> >> >> >> >> You need to setup a virtual IP to use as the mount point, most >> >> >> people >> >> >> use >> >> >> keepalived to provide a virtual ip via vrrp for this. Setup >> >> >> something >> >> >> like >> >> >> 10.10.10.10 and use that for your mounts. >> >> >> >> >> >> Right now, if 10.10.10.2 goes away, all your gluster mounts go away >> >> >> and >> >> >> your VMs get paused because the hypervisors can’t access the >> >> >> storage. >> >> >> Your >> >> >> gluster storage is still fine, but ovirt can’t talk to it because >> >> >> 10.10.10.2 >> >> >> isn’t there. >> >> >> >> >> >> If the SPM goes down, it the other hypervisor hosts will elect a new >> >> >> one >> >> >> (under control of the ovirt engine). >> >> >> >> >> >> Same scenarios if storage & compute are on the same server, you >> >> >> still >> >> >> need >> >> >> a vip address for the storage portion to serve as the mount point so >> >> >> it’s >> >> >> not dependent on any one server. >> >> >> >> >> >> -Darrell >> >> >> >> >> >> On Jul 3, 2014, at 1:14 AM, Punit Dambiwal >> >> >> wrote: >> >> >> >> >> >> Hi, >> >> >> >> >> >> I have some HA related concern about glusterfs with Ovirt...let say >> >> >> i >> >> >> have >> >> >> 4 storage node with gluster bricks as below :- >> >> >> >> >> >> 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have >> >> >> distributed >> >> >> replicated architecture... >> >> >> 2. Now attached this gluster storge to ovrit-engine with the >> >> >> following >> >> >> mount point 10.10.10.2/vol1 >> >> >> 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to >
Re: [ovirt-users] Glusterfs HA with Ovirt
Hi Andrew, Yes..both on the same node...but i have 4 nodes of this type in the same clusterSo it should work or not ?? 1. 4 physical nodes with 12 bricks each(distributed replicated)... 2. The same all 4 nodes use for the compute purpose also... Do i still require the VIP...or not ?? because i tested even the mount point node goes down...the VM will not pause and not affect... On Fri, Jul 4, 2014 at 1:18 PM, Andrew Lau wrote: > Or just localhost as your computer and storage are on the same box. > > > On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal wrote: > > Hi Andrew, > > > > Thanks for the updatethat means HA can not work without VIP in the > > gluster,so better to use the glusterfs with the VIP to take over the > ip...in > > case of any storage node failure... > > > > > > On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau > wrote: > >> > >> Don't forget to take into consideration quroum, that's something > >> people often forget > >> > >> The reason you're having the current happen, is gluster only uses the > >> initial IP address to get the volume details. After that it'll connect > >> directly to ONE of the servers, so with your 2 storage server case, > >> 50% chance it won't go to paused state. > >> > >> For the VIP, you could consider CTDB or keepelived, or even just using > >> localhost (as your storage and compute are all on the same machine). > >> For CTDB, checkout > >> http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ > >> > >> I have a BZ open regarding gluster VMs going into paused state and not > >> being resumable, so it's something you should also consider. My case, > >> switch dies, gluster volume goes away, VMs go into paused state but > >> can't be resumed. If you lose one server out of a cluster is a > >> different story though. > >> https://bugzilla.redhat.com/show_bug.cgi?id=1058300 > >> > >> HTH > >> > >> On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal > wrote: > >> > Hi, > >> > > >> > Thanks...can you suggest me any good how to/article for the glusterfs > >> > with > >> > ovirt... > >> > > >> > One strange thing is if i will try both (compute & storage) on the > same > >> > node...the below quote not happen > >> > > >> > - > >> > > >> > Right now, if 10.10.10.2 goes away, all your gluster mounts go away > and > >> > your > >> > VMs get paused because the hypervisors can’t access the storage. Your > >> > gluster storage is still fine, but ovirt can’t talk to it because > >> > 10.10.10.2 > >> > isn’t there. > >> > - > >> > > >> > Even the 10.10.10.2 goes down...i can still access the gluster mounts > >> > and no > >> > VM pausei can access the VM via ssh...no connection > failure.the > >> > connection drop only in case of SPM goes down and the another node > will > >> > elect as SPM(All the running VM's pause in this condition). > >> > > >> > > >> > > >> > On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic > >> > > >> > wrote: > >> >> > >> >> You need to setup a virtual IP to use as the mount point, most people > >> >> use > >> >> keepalived to provide a virtual ip via vrrp for this. Setup something > >> >> like > >> >> 10.10.10.10 and use that for your mounts. > >> >> > >> >> Right now, if 10.10.10.2 goes away, all your gluster mounts go away > and > >> >> your VMs get paused because the hypervisors can’t access the storage. > >> >> Your > >> >> gluster storage is still fine, but ovirt can’t talk to it because > >> >> 10.10.10.2 > >> >> isn’t there. > >> >> > >> >> If the SPM goes down, it the other hypervisor hosts will elect a new > >> >> one > >> >> (under control of the ovirt engine). > >> >> > >> >> Same scenarios if storage & compute are on the same server, you still > >> >> need > >> >> a vip address for the storage portion to serve as the mount point so > >> >> it’s > >> >> not dependent on any one server. > >> >> > >> >> -Darrell > >> >> > >> >> On Jul 3, 2014, at 1:14 AM, Punit Dambiwal > wrote: > >> >> > >> >> Hi, > >> >> > >> >> I have some HA related concern about glusterfs with Ovirt...let say i > >> >> have > >> >> 4 storage node with gluster bricks as below :- > >> >> > >> >> 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed > >> >> replicated architecture... > >> >> 2. Now attached this gluster storge to ovrit-engine with the > following > >> >> mount point 10.10.10.2/vol1 > >> >> 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to > 10.10.10.7) > >> >> SPM > >> >> is on 10.10.10.5... > >> >> 4. What happen if 10.10.10.2 will goes down.can hypervisior host > >> >> can > >> >> still access the storage ?? > >> >> 5. What happen if SPM goes down ??? > >> >> > >> >> Note :- What happen for point 4 &5 ,If storage and Compute both > working > >> >> on > >> >> the same server. > >> >> > >> >> Thanks, > >> >> Punit > >> >> ___ > >> >> Users mailing list > >> >> Users@ovirt.org > >> >> http://lists.ovirt.org/mailman/listinfo/user
Re: [ovirt-users] Glusterfs HA with Ovirt
Or just localhost as your computer and storage are on the same box. On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal wrote: > Hi Andrew, > > Thanks for the updatethat means HA can not work without VIP in the > gluster,so better to use the glusterfs with the VIP to take over the ip...in > case of any storage node failure... > > > On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau wrote: >> >> Don't forget to take into consideration quroum, that's something >> people often forget >> >> The reason you're having the current happen, is gluster only uses the >> initial IP address to get the volume details. After that it'll connect >> directly to ONE of the servers, so with your 2 storage server case, >> 50% chance it won't go to paused state. >> >> For the VIP, you could consider CTDB or keepelived, or even just using >> localhost (as your storage and compute are all on the same machine). >> For CTDB, checkout >> http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ >> >> I have a BZ open regarding gluster VMs going into paused state and not >> being resumable, so it's something you should also consider. My case, >> switch dies, gluster volume goes away, VMs go into paused state but >> can't be resumed. If you lose one server out of a cluster is a >> different story though. >> https://bugzilla.redhat.com/show_bug.cgi?id=1058300 >> >> HTH >> >> On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal wrote: >> > Hi, >> > >> > Thanks...can you suggest me any good how to/article for the glusterfs >> > with >> > ovirt... >> > >> > One strange thing is if i will try both (compute & storage) on the same >> > node...the below quote not happen >> > >> > - >> > >> > Right now, if 10.10.10.2 goes away, all your gluster mounts go away and >> > your >> > VMs get paused because the hypervisors can’t access the storage. Your >> > gluster storage is still fine, but ovirt can’t talk to it because >> > 10.10.10.2 >> > isn’t there. >> > - >> > >> > Even the 10.10.10.2 goes down...i can still access the gluster mounts >> > and no >> > VM pausei can access the VM via ssh...no connection failure.the >> > connection drop only in case of SPM goes down and the another node will >> > elect as SPM(All the running VM's pause in this condition). >> > >> > >> > >> > On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic >> > >> > wrote: >> >> >> >> You need to setup a virtual IP to use as the mount point, most people >> >> use >> >> keepalived to provide a virtual ip via vrrp for this. Setup something >> >> like >> >> 10.10.10.10 and use that for your mounts. >> >> >> >> Right now, if 10.10.10.2 goes away, all your gluster mounts go away and >> >> your VMs get paused because the hypervisors can’t access the storage. >> >> Your >> >> gluster storage is still fine, but ovirt can’t talk to it because >> >> 10.10.10.2 >> >> isn’t there. >> >> >> >> If the SPM goes down, it the other hypervisor hosts will elect a new >> >> one >> >> (under control of the ovirt engine). >> >> >> >> Same scenarios if storage & compute are on the same server, you still >> >> need >> >> a vip address for the storage portion to serve as the mount point so >> >> it’s >> >> not dependent on any one server. >> >> >> >> -Darrell >> >> >> >> On Jul 3, 2014, at 1:14 AM, Punit Dambiwal wrote: >> >> >> >> Hi, >> >> >> >> I have some HA related concern about glusterfs with Ovirt...let say i >> >> have >> >> 4 storage node with gluster bricks as below :- >> >> >> >> 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed >> >> replicated architecture... >> >> 2. Now attached this gluster storge to ovrit-engine with the following >> >> mount point 10.10.10.2/vol1 >> >> 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) >> >> SPM >> >> is on 10.10.10.5... >> >> 4. What happen if 10.10.10.2 will goes down.can hypervisior host >> >> can >> >> still access the storage ?? >> >> 5. What happen if SPM goes down ??? >> >> >> >> Note :- What happen for point 4 &5 ,If storage and Compute both working >> >> on >> >> the same server. >> >> >> >> Thanks, >> >> Punit >> >> ___ >> >> Users mailing list >> >> Users@ovirt.org >> >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> > >> > >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Glusterfs HA with Ovirt
Hi Andrew, Thanks for the updatethat means HA can not work without VIP in the gluster,so better to use the glusterfs with the VIP to take over the ip...in case of any storage node failure... On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau wrote: > Don't forget to take into consideration quroum, that's something > people often forget > > The reason you're having the current happen, is gluster only uses the > initial IP address to get the volume details. After that it'll connect > directly to ONE of the servers, so with your 2 storage server case, > 50% chance it won't go to paused state. > > For the VIP, you could consider CTDB or keepelived, or even just using > localhost (as your storage and compute are all on the same machine). > For CTDB, checkout > http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ > > I have a BZ open regarding gluster VMs going into paused state and not > being resumable, so it's something you should also consider. My case, > switch dies, gluster volume goes away, VMs go into paused state but > can't be resumed. If you lose one server out of a cluster is a > different story though. > https://bugzilla.redhat.com/show_bug.cgi?id=1058300 > > HTH > > On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal wrote: > > Hi, > > > > Thanks...can you suggest me any good how to/article for the glusterfs > with > > ovirt... > > > > One strange thing is if i will try both (compute & storage) on the same > > node...the below quote not happen > > > > - > > > > Right now, if 10.10.10.2 goes away, all your gluster mounts go away and > your > > VMs get paused because the hypervisors can’t access the storage. Your > > gluster storage is still fine, but ovirt can’t talk to it because > 10.10.10.2 > > isn’t there. > > - > > > > Even the 10.10.10.2 goes down...i can still access the gluster mounts > and no > > VM pausei can access the VM via ssh...no connection failure.the > > connection drop only in case of SPM goes down and the another node will > > elect as SPM(All the running VM's pause in this condition). > > > > > > > > On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic > > > wrote: > >> > >> You need to setup a virtual IP to use as the mount point, most people > use > >> keepalived to provide a virtual ip via vrrp for this. Setup something > like > >> 10.10.10.10 and use that for your mounts. > >> > >> Right now, if 10.10.10.2 goes away, all your gluster mounts go away and > >> your VMs get paused because the hypervisors can’t access the storage. > Your > >> gluster storage is still fine, but ovirt can’t talk to it because > 10.10.10.2 > >> isn’t there. > >> > >> If the SPM goes down, it the other hypervisor hosts will elect a new one > >> (under control of the ovirt engine). > >> > >> Same scenarios if storage & compute are on the same server, you still > need > >> a vip address for the storage portion to serve as the mount point so > it’s > >> not dependent on any one server. > >> > >> -Darrell > >> > >> On Jul 3, 2014, at 1:14 AM, Punit Dambiwal wrote: > >> > >> Hi, > >> > >> I have some HA related concern about glusterfs with Ovirt...let say i > have > >> 4 storage node with gluster bricks as below :- > >> > >> 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed > >> replicated architecture... > >> 2. Now attached this gluster storge to ovrit-engine with the following > >> mount point 10.10.10.2/vol1 > >> 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) > SPM > >> is on 10.10.10.5... > >> 4. What happen if 10.10.10.2 will goes down.can hypervisior host can > >> still access the storage ?? > >> 5. What happen if SPM goes down ??? > >> > >> Note :- What happen for point 4 &5 ,If storage and Compute both working > on > >> the same server. > >> > >> Thanks, > >> Punit > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > >> > > > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Glusterfs HA with Ovirt
Don't forget to take into consideration quroum, that's something people often forget The reason you're having the current happen, is gluster only uses the initial IP address to get the volume details. After that it'll connect directly to ONE of the servers, so with your 2 storage server case, 50% chance it won't go to paused state. For the VIP, you could consider CTDB or keepelived, or even just using localhost (as your storage and compute are all on the same machine). For CTDB, checkout http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ I have a BZ open regarding gluster VMs going into paused state and not being resumable, so it's something you should also consider. My case, switch dies, gluster volume goes away, VMs go into paused state but can't be resumed. If you lose one server out of a cluster is a different story though. https://bugzilla.redhat.com/show_bug.cgi?id=1058300 HTH On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal wrote: > Hi, > > Thanks...can you suggest me any good how to/article for the glusterfs with > ovirt... > > One strange thing is if i will try both (compute & storage) on the same > node...the below quote not happen > > - > > Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your > VMs get paused because the hypervisors can’t access the storage. Your > gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 > isn’t there. > - > > Even the 10.10.10.2 goes down...i can still access the gluster mounts and no > VM pausei can access the VM via ssh...no connection failure.the > connection drop only in case of SPM goes down and the another node will > elect as SPM(All the running VM's pause in this condition). > > > > On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic > wrote: >> >> You need to setup a virtual IP to use as the mount point, most people use >> keepalived to provide a virtual ip via vrrp for this. Setup something like >> 10.10.10.10 and use that for your mounts. >> >> Right now, if 10.10.10.2 goes away, all your gluster mounts go away and >> your VMs get paused because the hypervisors can’t access the storage. Your >> gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 >> isn’t there. >> >> If the SPM goes down, it the other hypervisor hosts will elect a new one >> (under control of the ovirt engine). >> >> Same scenarios if storage & compute are on the same server, you still need >> a vip address for the storage portion to serve as the mount point so it’s >> not dependent on any one server. >> >> -Darrell >> >> On Jul 3, 2014, at 1:14 AM, Punit Dambiwal wrote: >> >> Hi, >> >> I have some HA related concern about glusterfs with Ovirt...let say i have >> 4 storage node with gluster bricks as below :- >> >> 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed >> replicated architecture... >> 2. Now attached this gluster storge to ovrit-engine with the following >> mount point 10.10.10.2/vol1 >> 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) SPM >> is on 10.10.10.5... >> 4. What happen if 10.10.10.2 will goes down.can hypervisior host can >> still access the storage ?? >> 5. What happen if SPM goes down ??? >> >> Note :- What happen for point 4 &5 ,If storage and Compute both working on >> the same server. >> >> Thanks, >> Punit >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Glusterfs HA with Ovirt
Hi, Thanks...can you suggest me any good how to/article for the glusterfs with ovirt... One strange thing is if i will try both (compute & storage) on the same node...the below quote not happen - Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there. - Even the 10.10.10.2 goes down...i can still access the gluster mounts and no VM pausei can access the VM via ssh...no connection failure.the connection drop only in case of SPM goes down and the another node will elect as SPM(All the running VM's pause in this condition). On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic wrote: > You need to setup a virtual IP to use as the mount point, most people use > keepalived to provide a virtual ip via vrrp for this. Setup something like > 10.10.10.10 and use that for your mounts. > > Right now, if 10.10.10.2 goes away, all your gluster mounts go away and > your VMs get paused because the hypervisors can’t access the storage. Your > gluster storage is still fine, but ovirt can’t talk to it because > 10.10.10.2 isn’t there. > > If the SPM goes down, it the other hypervisor hosts will elect a new one > (under control of the ovirt engine). > > Same scenarios if storage & compute are on the same server, you still need > a vip address for the storage portion to serve as the mount point so it’s > not dependent on any one server. > > -Darrell > > On Jul 3, 2014, at 1:14 AM, Punit Dambiwal wrote: > > Hi, > > I have some HA related concern about glusterfs with Ovirt...let say i have > 4 storage node with gluster bricks as below :- > > 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed > replicated architecture... > 2. Now attached this gluster storge to ovrit-engine with the following > mount point 10.10.10.2/vol1 > 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) SPM > is on 10.10.10.5... > 4. What happen if 10.10.10.2 will goes down.can hypervisior host can > still access the storage ?? > 5. What happen if SPM goes down ??? > > Note :- What happen for point 4 &5 ,If storage and Compute both working on > the same server. > > Thanks, > Punit > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Glusterfs HA with Ovirt
You need to setup a virtual IP to use as the mount point, most people use keepalived to provide a virtual ip via vrrp for this. Setup something like 10.10.10.10 and use that for your mounts. Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there. If the SPM goes down, it the other hypervisor hosts will elect a new one (under control of the ovirt engine). Same scenarios if storage & compute are on the same server, you still need a vip address for the storage portion to serve as the mount point so it’s not dependent on any one server. -Darrell On Jul 3, 2014, at 1:14 AM, Punit Dambiwal wrote: > Hi, > > I have some HA related concern about glusterfs with Ovirt...let say i have 4 > storage node with gluster bricks as below :- > > 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed > replicated architecture... > 2. Now attached this gluster storge to ovrit-engine with the following mount > point 10.10.10.2/vol1 > 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) SPM is > on 10.10.10.5... > 4. What happen if 10.10.10.2 will goes down.can hypervisior host can > still access the storage ?? > 5. What happen if SPM goes down ??? > > Note :- What happen for point 4 &5 ,If storage and Compute both working on > the same server. > > Thanks, > Punit > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Glusterfs HA with Ovirt
Hi, I have some HA related concern about glusterfs with Ovirt...let say i have 4 storage node with gluster bricks as below :- 1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed replicated architecture... 2. Now attached this gluster storge to ovrit-engine with the following mount point 10.10.10.2/vol1 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) SPM is on 10.10.10.5... 4. What happen if 10.10.10.2 will goes down.can hypervisior host can still access the storage ?? 5. What happen if SPM goes down ??? Note :- What happen for point 4 &5 ,If storage and Compute both working on the same server. Thanks, Punit ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
