[ovirt-users] hosted engine setup, iSCSI no LUNs shown

2019-08-20 Thread billyburly
I'm trying to setup the hosted engine on top of iSCSI storage. It successfully logs in and gets the target, however the process errors out claiming there are no LUNs. But if you look on the host, the disks were added to the system. [ INFO ] TASK [ovirt.hosted_engine_setup : iSCSI discover with

[ovirt-users] Hosted Engine setup issues

2018-08-21 Thread Jeremy Tourville
If I try to setup hosted engine with the option to use Ansible it eventually fails on me. See https://lists.ovirt.org/archives/list/users@ovirt.org/thread/LPK7OGFALSQFAN4UMEIHOION4BS2HJLN/ However if I run hosted-engine --deploy --noansible the setup does complete. There is further trouble

[ovirt-users] Hosted Engine Setup Issues on Ovirt Node 4.2.5.1

2018-08-20 Thread Jeremy Tourville
If I try to setup hosted engine with the option to use Ansible it eventually fails on me. See https://lists.ovirt.org/archives/list/users@ovirt.org/thread/LPK7OGFALSQFAN4UMEIHOION4BS2HJLN/ However if I run hosted-engine --deploy --noansible the setup does complete. There is further trouble

[ovirt-users] hosted engine setup error

2018-05-23 Thread dhy336
hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list

[ovirt-users] Hosted Engine Setup Erro

2018-05-23 Thread Sakhi Hadebe
Hi, I am new to ansible and tring to deploy an ovrt cluster with gluster. I am following this documentation https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/, although the screenshots are not exactly the same. Gluster successfully deployed. Below is what is

[ovirt-users] Hosted Engine Setup error (v4.2.3)

2018-05-17 Thread ovirt
Engine network config error Following this blog post: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ I get an error saying the hosted engine setup is "trying" to use vibr0 (192.168.xxx.x) even though I have the bridge interface set to "eno1"

[ovirt-users] Hosted Engine Setup error (oVirt v4.2.3)

2018-05-15 Thread ovirt
Engine network config error Following this blog post: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ I get an error saying the hosted engine setup is "trying" to use vibr0 (192.168.xxx.x) even though I have the bridge interface set to "eno1"

Re: [ovirt-users] Hosted engine setup question

2017-10-03 Thread Demeter Tibor
Dear Charles, Thank you for your reply. I don't want to make an another storage domain, I just want to do a detach-attach procedure with the existing. Also, I have an another question. Is it possible delete snapshots in 4.1 what were created in 3.5? How is safe this? I have some vm

Re: [ovirt-users] Hosted engine setup question

2017-10-02 Thread Charles Kozler
I did a 3.6 to 4.1 like this. I moved all of my VMs to a new storage domain (the other was hyperconverged gluster) and then took a full outage, shut down all of my VMs, detached from 3.6, and imported on 4.1. I had no issues other than expected mac address changes, but I think you can manually

Re: [ovirt-users] Hosted engine setup question

2017-10-02 Thread Demeter Tibor
Hi, Can anyone answer my questions? Thanks in advance, R, Tibor - 2017. szept.. 19., 8:31, Demeter Tibor írta: > - I have a productive ovirt cluster based on 3.5 series. This using a shared > nfs > storage. Is it possible to migrate VMs from 3.5 to 4.1 with

[ovirt-users] Hosted engine setup question

2017-09-19 Thread Demeter Tibor
Hi, I just installed a hosted engine based four nodes cluster to glustered storage. It seems to working fine, but I have some question about it. - I would like to make an own cluster and datacenter. Is it possible to remove a host and re-add to an another cluster while it is running the

Re: [ovirt-users] hosted engine setup with Gluster fail

2017-08-28 Thread Kasturi Narra
ately by e-mail if you have received this e-mail by > mistake, and delete this material. Thumbay Group accepts no liability for > errors or omissions in the contents of this message, which arise as a > result of e-mail transmission. > > > > *From:* Kasturi Narra [mailto:kna...@

Re: [ovirt-users] hosted engine setup with Gluster fail

2017-08-28 Thread Anzar Esmail Sainudeen
PM To: Anzar Esmail Sainudeen Cc: users Subject: Re: [ovirt-users] hosted engine setup with Gluster fail yes, you can create. I do not see any problems there. May i know how these vgs are created ? If they are not created using gdeploy then you will have to create bricks manually from th

Re: [ovirt-users] hosted engine setup with Gluster fail

2017-08-28 Thread Kasturi Narra
the sender immediately by e-mail if you have received this e-mail by > mistake, and delete this material. Thumbay Group accepts no liability for > errors or omissions in the contents of this message, which arise as a > result of e-mail transmission. > > > > *From:* Kasturi Narra

Re: [ovirt-users] hosted engine setup with Gluster fail

2017-08-28 Thread Anzar Esmail Sainudeen
r omissions in the contents of this message, which arise as a result of e-mail transmission. From: Kasturi Narra [mailto:kna...@redhat.com] Sent: Monday, August 28, 2017 9:48 AM To: Anzar Esmail Sainudeen Cc: users Subject: Re: [ovirt-users] hosted engine setup with Gluster fail Hi, If i unde

Re: [ovirt-users] hosted engine setup with Gluster fail

2017-08-27 Thread Kasturi Narra
Hi, If i understand right gdeploy script is failing at [1]. There could be two possible reasons why that would fail. 1) can you please check if the disks what would be used for brick creation does not have lables or any partitions on them ? 2) can you please check if the path [1] exists. If

[ovirt-users] hosted engine setup with Gluster fail

2017-08-27 Thread Anzar Esmail Sainudeen
Dear Team Ovirt, I am trying to deploy hosted engine setup with Gluster. Hosted engine setup was failed. Total number of host is 3 server PLAY [gluster_servers] * TASK [Run a shell script]

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-06-18 Thread Mike DePaulo
On Thu, May 18, 2017 at 10:03 AM, Sachidananda URS wrote: > Hi, > > On Thu, May 18, 2017 at 7:08 PM, Sahina Bose wrote: > >> >> >> On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo >> wrote: >> >>> Well, I tried both of the following: >>>

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-18 Thread Sachidananda URS
Hi, On Thu, May 18, 2017 at 7:08 PM, Sahina Bose wrote: > > > On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo > wrote: > >> Well, I tried both of the following: >> 1. Having only a boot partition and a PV for the OS that does not take >> up the entire

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-18 Thread Sahina Bose
On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo wrote: > Well, I tried both of the following: > 1. Having only a boot partition and a PV for the OS that does not take > up the entire disk, and then specifying "sda" in Hosted Engine Setup. > 2. Having not only a boot partition

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-18 Thread Mike DePaulo
Well, I tried both of the following: 1. Having only a boot partition and a PV for the OS that does not take up the entire disk, and then specifying "sda" in Hosted Engine Setup. 2. Having not only a boot partition and a PV for the OS, but also an empty (and not formatted) /dev/sda3 PV that I

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-09 Thread Mike DePaulo
On Mon, May 8, 2017 at 9:00 AM, knarra wrote: > On 05/07/2017 04:48 PM, Mike DePaulo wrote: >> >> Hi. I am trying to follow this guide. Is it possible to use part of my >> OS disk /dev/sda for the bricks? >> >>

Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-08 Thread knarra
On 05/07/2017 04:48 PM, Mike DePaulo wrote: Hi. I am trying to follow this guide. Is it possible to use part of my OS disk /dev/sda for the bricks? https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ I am using oVirt Node 4.1.1.1. I am aware of the manual

[ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

2017-05-07 Thread Mike DePaulo
Hi. I am trying to follow this guide. Is it possible to use part of my OS disk /dev/sda for the bricks? https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning requirements. I am guessing I have to

Re: [ovirt-users] Hosted engine setup shooting dirty pool

2017-04-13 Thread Sahina Bose
On Wed, Apr 12, 2017 at 11:15 PM, Jamie Lawrence wrote: > > > On Apr 12, 2017, at 1:31 AM, Evgenia Tokar wrote: > > > > Hi Jamie, > > > > Are you trying to setup hosted engine using the "hosted-engine --deploy" > command, or are you trying to

Re: [ovirt-users] Hosted engine setup shooting dirty pool

2017-04-12 Thread Jamie Lawrence
> On Apr 12, 2017, at 1:31 AM, Evgenia Tokar wrote: > > Hi Jamie, > > Are you trying to setup hosted engine using the "hosted-engine --deploy" > command, or are you trying to migrate existing he vm? > > For hosted engine setup you need to provide a clean storage domain,

Re: [ovirt-users] Hosted engine setup shooting dirty pool

2017-04-12 Thread Evgenia Tokar
Hi Jamie, Are you trying to setup hosted engine using the "hosted-engine --deploy" command, or are you trying to migrate existing he vm? For hosted engine setup you need to provide a clean storage domain, which is not a part of your 4.1 setup, this storage domain will be used for the hosted

[ovirt-users] Hosted engine setup shooting dirty pool

2017-04-11 Thread Jamie Lawrence
Or at least, refusing to mount a dirty pool. I have 4.1 set up, configured and functional, currently wired up with two VM hosts and three Gluster hosts. It is configured with a (temporary) NFS data storage domain, with the end-goal being two data domains on Gluster; one for the hosted engine,

[ovirt-users] Hosted engine setup shooting dirty pool

2017-04-11 Thread Jamie Lawrence
Or at least, refusing to mount a dirty pool. I’m having trouble getting the hosted engine installed. I have 4.1 set up, configured and functional, currently wired up with two VM hosts and three Gluster hosts. It is configured with a (temporary) NFS data storage domain, with the end-goal being

Re: [ovirt-users] hosted-Engine setup: hostname 'node01.example.com' doesn't uniquely match the interface selected for the management bridge

2016-07-14 Thread Yedidyah Bar David
On Tue, Jul 5, 2016 at 5:56 PM, mots wrote: > Hello, > > I'm trying to install Ovirt 4 on a new set of hosts. During "hosted-engine > --deploy" I get the following error: (personal information is replaced with > generic placeholders) > > [ INFO ] Stage: Setup validation > [

[ovirt-users] hosted-Engine setup: hostname 'node01.example.com' doesn't uniquely match the interface selected for the management bridge

2016-07-05 Thread mots
Hello, I'm trying to install Ovirt 4 on a new set of hosts. During "hosted-engine --deploy" I get the following error: (personal information is replaced with generic placeholders) [ INFO  ] Stage: Setup validation [ ERROR ] Failed to execute stage 'Setup validation': hostname

Re: [ovirt-users] Hosted engine setup fails - system unreliable

2016-05-22 Thread Yedidyah Bar David
On Sat, May 21, 2016 at 8:47 AM, Bill Bill wrote: > I’ve tried over & over on fresh installs to setup the hosted engine VM > however, each time, it fails. No clue as to what the problem is as it just > says “this system is unreliable”. Please post (a link to?) full logs.

[ovirt-users] Hosted engine setup fails - system unreliable

2016-05-20 Thread Bill Bill
I’ve tried over & over on fresh installs to setup the hosted engine VM however, each time, it fails. No clue as to what the problem is as it just says “this system is unreliable”. /// Log output: /// 2016-05-21 01:42:42 DEBUG otopi.context context.dumpEnvironment:510 ENV

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-03 Thread Langley, Robert
and working. I got past the storage configuration. From: Sahina Bose [mailto:sab...@redhat.com] Sent: Monday, May 2, 2016 11:24 PM To: Langley, Robert <robert.lang...@ventura.org>; users@ovirt.org Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute Command that failed to e

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-03 Thread Langley, Robert
Thank you Simone! -Original Message- From: Simone Tiraboschi [mailto:stira...@redhat.com] Sent: Tuesday, May 3, 2016 12:34 AM To: Langley, Robert <robert.lang...@ventura.org> Cc: users@ovirt.org Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute On Mon, May 2

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-03 Thread Simone Tiraboschi
On Mon, May 2, 2016 at 9:15 PM, Gianluca Cecchi wrote: > > > On Mon, May 2, 2016 at 8:39 PM, Gianluca Cecchi > wrote: >> >> On Mon, May 2, 2016 at 11:14 AM, Simone Tiraboschi >> wrote: >>> >>> >>> >>> >>> >>> Can you

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-03 Thread Simone Tiraboschi
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert wrote: > Hi Sahina, > > > > Thank you for your response. Let me know if you’ll need any of the log > before the Storage Configuration section. I looked at this earlier and I was > wondering why, after choosing to use

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-03 Thread Sahina Bose
Command that failed to execute from your hosted-engine node - "gluster volume info engine-vol --remote-host gsave0.engine.local" Can you check the glusterfs versions on the hosted-engine node and gsave0.engine.local node - are they the same? On 05/02/2016 11:08 PM, Langley, Robert wrote:

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-02 Thread Langley, Robert
Correction; I verified and on the Gluster Volume "engine-vol" nfs.disable is off. Not sure if that is significant or not. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-02 Thread Gianluca Cecchi
On Mon, May 2, 2016 at 8:39 PM, Gianluca Cecchi wrote: > On Mon, May 2, 2016 at 11:14 AM, Simone Tiraboschi > wrote: > >> >> >>> >> >>> Can you please check the entropy value on your host? >> >>> cat /proc/sys/kernel/random/entropy_avail >> >>>

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-02 Thread Gianluca Cecchi
On Mon, May 2, 2016 at 11:14 AM, Simone Tiraboschi wrote: > > >>> > >>> Can you please check the entropy value on your host? > >>> cat /proc/sys/kernel/random/entropy_avail > >>> > >> > >> I have not at hand now the server. I'll check soon and report > >> Do you mean

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-02 Thread Langley, Robert
Hi Sahina, Thank you for your response. Let me know if you'll need any of the log before the Storage Configuration section. I looked at this earlier and I was wondering why, after choosing to use GlusterFS, there is still reference to NFS (nfs.py)? I do believe NFS is disabled in my Gluster

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-02 Thread Simone Tiraboschi
On Mon, May 2, 2016 at 11:06 AM, Yedidyah Bar David wrote: > On Mon, May 2, 2016 at 11:48 AM, Gianluca Cecchi > wrote: >> On Mon, May 2, 2016 at 9:58 AM, Simone Tiraboschi wrote: >>> >>> >>> >>> hosted-engine-setup creates a fresh VM and inject a

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-02 Thread Yedidyah Bar David
On Mon, May 2, 2016 at 11:48 AM, Gianluca Cecchi wrote: > On Mon, May 2, 2016 at 9:58 AM, Simone Tiraboschi wrote: >> >> >> >> hosted-engine-setup creates a fresh VM and inject a cloud-init script >> to configure it and execute there engine-setup to configure the engine

Re: [ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-05-02 Thread Simone Tiraboschi
On Sat, Apr 30, 2016 at 10:59 PM, Gianluca Cecchi wrote: > Hello, > trying to deploy a self hosted engine on an Intel NUC6i5SYB with CentOS 7.2 > using oVirt 3.6.5 and appliance (picked up rpm is > ovirt-engine-appliance-3.6-20160420.1.el7.centos.noarch) > > Near the

Re: [ovirt-users] hosted-engine setup Gluster fails to execute

2016-05-01 Thread Sahina Bose
You will need to provide the hosted-engine setup log to see which gluster command failed to execute. On 04/30/2016 10:10 PM, Langley, Robert wrote: I’m attempting to host the engine within a GlusterFS Replica 3 storage volume. During setup, after entering the server and volume, I’m

[ovirt-users] hosted engine setup failed for 10 minutes delay.. engine seems alive

2016-04-30 Thread Gianluca Cecchi
Hello, trying to deploy a self hosted engine on an Intel NUC6i5SYB with CentOS 7.2 using oVirt 3.6.5 and appliance (picked up rpm is ovirt-engine-appliance-3.6-20160420.1.el7.centos.noarch) Near the end of the command hosted-engine --deploy I get ... |- [ INFO ] Initializing

[ovirt-users] hosted-engine setup Gluster fails to execute

2016-04-30 Thread Langley, Robert
I'm attempting to host the engine within a GlusterFS Replica 3 storage volume. During setup, after entering the server and volume, I'm receiving the message that '/sbin/gluster' failed to execute. Reviewing the gluster cmd log, it looks as though /sbin/gluster does execute. I can successfully

Re: [ovirt-users] [hosted-engine] Setup broke host's network

2016-03-19 Thread Simone Tiraboschi
On Thu, Mar 17, 2016 at 11:34 AM, Wee Sritippho wrote: > Hi, > > I setup the host's network while installing CentOS 7 (GUI), so the network > configuration is like this: > > eno1 --> bond0_slave1 --\ > |--> bond0 > eno2 --> bond0_slave2 --/ > > After

[ovirt-users] Hosted Engine setup - got " Failed to start service 'ovirt-ha-agent' "

2015-12-18 Thread Willard Dennis
Hi all, Did a hosted engine setup using a Gluster storage domain, it went well until the end, where I got this error: [ INFO ] Saving hosted-engine configuration on the shared storage domain [ INFO ] Shutting down the engine VM [ INFO ] Enabling and starting HA services [ ERROR ] Failed to

Re: [ovirt-users] Hosted Engine setup - got " Failed to start service 'ovirt-ha-agent' "

2015-12-18 Thread Will Dennis
I yum updated my hosts, and it did update ovirt-hosted-engine-ha on all to 1.3.3.5 (two of my hosts include the one I did the engine install on were previously 1.3.3.4, and the third one was 1.3.3.3 for some reason) Shortly thereafter, I began getting ovirt-hosted-engine state machine emails,

Re: [ovirt-users] Hosted Engine setup - got " Failed to start service 'ovirt-ha-agent' "

2015-12-18 Thread Simone Tiraboschi
On Fri, Dec 18, 2015 at 7:08 PM, Willard Dennis wrote: > Hi all, > > Did a hosted engine setup using a Gluster storage domain, it went well > until the end, where I got this error: > > [ INFO ] Saving hosted-engine configuration on the shared storage domain > [ INFO ]

[ovirt-users] Hosted engine setup using Gluster - what is proper param's for the storage domain names?

2015-12-17 Thread Willard Dennis
Hi all, Doing the hosted engine setup on Gluster; am at the point of configuring the storage domain / datacenter names, and not sure of what my best move is here… Here’s what I’m seeing: —— --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort.

Re: [ovirt-users] Hosted engine setup using Gluster - what is proper param's for the storage domain names?

2015-12-17 Thread Sahina Bose
On 12/17/2015 10:32 PM, Willard Dennis wrote: Hi all, Doing the hosted engine setup on Gluster; am at the point of configuring the storage domain / datacenter names, and not sure of what my best move is here… Here’s what I’m seeing: —— --== STORAGE CONFIGURATION ==--

[ovirt-users] Hosted-engine-setup

2015-11-19 Thread Budur Nagaraju
HI Getting below error while doing a hosted engine setup, OS is running on ESXi6.0 version. [root@he ~]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Continuing will configure this host for

Re: [ovirt-users] Hosted-engine-setup in an ESXi VM fails

2015-11-19 Thread Yedidyah Bar David
On Thu, Nov 19, 2015 at 11:55 AM, Budur Nagaraju wrote: > HI > > Getting below error while doing a hosted engine setup, OS is running on > ESXi6.0 version. > > > > > [root@he ~]# hosted-engine --deploy > [ INFO ] Stage: Initializing > [ INFO ] Generating a temporary VNC

Re: [ovirt-users] Hosted-engine-setup

2015-11-19 Thread Martin Sivak
Hello, hosted-engine has to be executed on a physical host (or a nested host with all the proper CPU flags) that supports KVM virtualization. That means linux kernel and the vmx flag in /proc/cpuinfo iirc. I am also adding Sandro who is the maintainer of the setup tool as he might have some

Re: [ovirt-users] Hosted-engine-setup

2015-11-19 Thread Simone Tiraboschi
On Thu, Nov 19, 2015 at 11:16 AM, Martin Sivak wrote: > Hello, > > hosted-engine has to be executed on a physical host (or a nested host > with all the proper CPU flags) that supports KVM virtualization. That > means linux kernel and the vmx flag in /proc/cpuinfo iirc. > > I

Re: [ovirt-users] Hosted-engine-setup

2015-11-19 Thread Sandro Bonazzola
On Thu, Nov 19, 2015 at 11:57 AM, Simone Tiraboschi wrote: > > > On Thu, Nov 19, 2015 at 11:16 AM, Martin Sivak wrote: > >> Hello, >> >> hosted-engine has to be executed on a physical host (or a nested host >> with all the proper CPU flags) that supports

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-27 Thread Yedidyah Bar David
is not present -Ursprüngliche Nachricht- Von: Yedidyah Bar David [mailto:d...@redhat.com] Gesendet: Montag, 27. April 2015 09:46 An: Sven Achtelik; Martin Sivak Cc: Roy Golan; users@ovirt.org Betreff: Re: AW: AW: [ovirt-users] Hosted Engine-Setup issue

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-27 Thread Sven Achtelik
An: Sven Achtelik Cc: Yedidyah Bar David; Roy Golan; users@ovirt.org Betreff: Re: AW: AW: AW: [ovirt-users] Hosted Engine-Setup issue additional host Uh this really is weird. The situation is clear though: Broker dies when it tries to initialize logging (missing /dev/stdout ???) Agent dies because

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-27 Thread Sven Achtelik
-Ursprüngliche Nachricht- Von: Yedidyah Bar David [mailto:d...@redhat.com] Gesendet: Montag, 27. April 2015 09:46 An: Sven Achtelik; Martin Sivak Cc: Roy Golan; users@ovirt.org Betreff: Re: AW: AW: [ovirt-users] Hosted Engine-Setup issue additional host - Original

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-27 Thread Yedidyah Bar David
- Original Message - From: Sven Achtelik sven.achte...@mailpool.us To: Roy Golan rgo...@redhat.com, users@ovirt.org, Yedidyah Bar David d...@redhat.com Sent: Sunday, April 26, 2015 6:57:06 PM Subject: AW: [ovirt-users] Hosted Engine-Setup issue additional host On the node

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-27 Thread Martin Sivak
An: Sven Achtelik; Martin Sivak Cc: Roy Golan; users@ovirt.org Betreff: Re: AW: AW: [ovirt-users] Hosted Engine-Setup issue additional host - Original Message - From: Sven Achtelik sven.achte...@mailpool.us To: Yedidyah Bar David d...@redhat.com Cc: Roy Golan rgo...@redhat.com

Re: [ovirt-users] Hosted-Engine Setup: Failed to setup networks

2015-04-26 Thread Yedidyah Bar David
- Original Message - From: Sven Achtelik sven.achte...@mailpool.us To: users@ovirt.org Sent: Thursday, April 23, 2015 10:58:15 AM Subject: Re: [ovirt-users] Hosted-Engine Setup: Failed to setup networks Hi All, fixed it, vdsm doesn’t like the PREFIX entry in the ifcfg

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-26 Thread Sven Achtelik
Golan Gesendet: Sonntag, 26. April 2015 16:59 An: users@ovirt.org; Yedidyah Bar David Betreff: Re: [ovirt-users] Hosted Engine-Setup issue additional host On 04/26/2015 05:38 PM, Sven Achtelik wrote: Hi All, after a successful setup of hosted-engine on the first node I'm having trouble completing

[ovirt-users] Hosted Engine-Setup issue additional host

2015-04-26 Thread Sven Achtelik
Hi All, after a successful setup of hosted-engine on the first node I'm having trouble completing it on an additional node. The Setup fails with: - [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes... [ INFO ]

Re: [ovirt-users] Hosted Engine-Setup issue additional host

2015-04-26 Thread Roy Golan
On 04/26/2015 05:38 PM, Sven Achtelik wrote: Hi All, after a successful setup of hosted-engine on the first node I’m having trouble completing it on an additional node. The Setup fails with: - [ INFO ] Waiting for the host to become operational in the

Re: [ovirt-users] Hosted-Engine Setup: Failed to setup networks

2015-04-23 Thread Sven Achtelik
-users] Hosted-Engine Setup: Failed to setup networks Hi Everyone, I tried to install oVirt 3.5 - hosted engine and it fails with some VDSM error while creating the ovirtmgmt bridge. The Host is running CentOS 7 and the interface I want to use is em1 and it's the parent interface from a vlan

[ovirt-users] Hosted-Engine Setup: Failed to setup networks

2015-04-22 Thread Sven Achtelik
Hi Everyone, I tried to install oVirt 3.5 - hosted engine and it fails with some VDSM error while creating the ovirtmgmt bridge. The Host is running CentOS 7 and the interface I want to use is em1 and it's the parent interface from a vlan. [ ERROR ] Failed to execute stage 'Misc

Re: [ovirt-users] Hosted Engine Setup

2015-02-02 Thread Uwe Laverenz
Hello Michael, Am 02.02.2015 um 00:55 schrieb Michael Schefczyk: - In the web interface of the hosted engine, however (Hosted Engine Network.pdf, page 3) the required network ovirtmgmt is initially not connected to bond0 (while it is in reality connected, as ifconfig shows). When dragging

Re: [ovirt-users] hosted-engine setup ovirtmgmt bridge

2015-01-26 Thread Uwe Laverenz
Hi, Am 26.01.2015 um 23:49 schrieb Mikola Rose: On a hosted-engine --deploy on a machine that has 2 network cards em1 192.168.0.178 General Network em2 192.168.1.151 Net that NFS server is on, no dns no gateway which one would I set as ovirtmgmt bridge Please indicate a nic to set

[ovirt-users] hosted-engine setup ovirtmgmt bridge

2015-01-26 Thread Mikola Rose
Hi there again list users; On a hosted-engine --deploy on a machine that has 2 network cards em1 192.168.0.178 General Network em2 192.168.1.151 Net that NFS server is on, no dns no gateway which one would I set as ovirtmgmt bridge Please indicate a nic to set ovirtmgmt bridge on: (em1,

[ovirt-users] hosted-engine setup/migration features for 3.6

2014-12-03 Thread Yedidyah Bar David
Hi all, We already have quite a lot of open ovirt-hosted-engine-setup bugs for 3.6 [1]. Yesterday I tried helping someone on irc who planned to migrate to hosted-engine manually, and without knowing (so it seems) that such a feature exists. He had an engine set up on a physical host, prepared a

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-24 Thread Jiri Moskovcak
stefan.wend...@tngtech.com, users@ovirt.org Sent: Wednesday, September 24, 2014 8:40:58 AM Subject: Re: [ovirt-users] hosted engine setup on second host fails - Original Message - From: Itamar Heim ih...@redhat.com To: Stefan Wendler stefan.wend...@tngtech.com Cc: Yedidyah Bar David ybard

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-24 Thread Stefan Wendler
Oh well. I think this is fixed. I upgraded to 3.4.4 and the message seems to be gone. the agents are running :) Thank you very much !!! :) On 09/24/2014 15:23, Stefan Wendler wrote: Okay, I'm truncating the previous mails here Davids hint was the solution. I had the ovirt hosts already

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-24 Thread Itamar Heim
Seems we should consider not adding the host if already there. Please open a bug. Though I really hope in 3.6 to see this done from the gui On Sep 24, 2014 4:23 PM, Stefan Wendler stefan.wend...@tngtech.com wrote: Okay, I'm truncating the previous mails here Davids hiOkay, I'm

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-23 Thread Stefan Wendler
On 09/22/2014 10:52, Stefan Wendler wrote: On 09/19/2014 15:58, Itamar Heim wrote: On 09/19/2014 03:32 PM, Stefan Wendler wrote: Hi there. I'm trying to install a hosted-engine on our second node (fist engine runs on node1). But I always get the message: [ ERROR ] Cannot automatically

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-23 Thread Itamar Heim
On 09/23/2014 05:17 PM, Stefan Wendler wrote: On 09/22/2014 10:52, Stefan Wendler wrote: On 09/19/2014 15:58, Itamar Heim wrote: On 09/19/2014 03:32 PM, Stefan Wendler wrote: Hi there. I'm trying to install a hosted-engine on our second node (fist engine runs on node1). But I always get the

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-23 Thread Stefan Wendler
On 09/23/2014 17:01, Itamar Heim wrote: On 09/23/2014 05:17 PM, Stefan Wendler wrote: On 09/22/2014 10:52, Stefan Wendler wrote: On 09/19/2014 15:58, Itamar Heim wrote: On 09/19/2014 03:32 PM, Stefan Wendler wrote: Hi there. I'm trying to install a hosted-engine on our second node (fist

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-23 Thread Itamar Heim
On Sep 23, 2014 7:03 PM, Stefan Wendler stefan.wend...@tngtech.com wrote: On 09/23/2014 17:01, Itamar Heim wrote: On 09/23/2014 05:17 PM, Stefan Wendler wrote: On 09/22/2014 10:52, Stefan Wendler wrote: On 09/19/2014 15:58, Itamar Heim wrote: On 09/19/2014 03:32 PM, Stefan Wendler

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-22 Thread Stefan Wendler
On 09/19/2014 15:58, Itamar Heim wrote: On 09/19/2014 03:32 PM, Stefan Wendler wrote: Hi there. I'm trying to install a hosted-engine on our second node (fist engine runs on node1). But I always get the message: [ ERROR ] Cannot automatically add the host to the Default cluster: Cannot

[ovirt-users] hosted engine setup on second host fails

2014-09-19 Thread Stefan Wendler
Hi there. I'm trying to install a hosted-engine on our second node (fist engine runs on node1). But I always get the message: [ ERROR ] Cannot automatically add the host to the Default cluster: Cannot add Host. Host with the same address already exists. I'm not entirely sure what I have to do

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-19 Thread Itamar Heim
On 09/19/2014 03:32 PM, Stefan Wendler wrote: Hi there. I'm trying to install a hosted-engine on our second node (fist engine runs on node1). But I always get the message: [ ERROR ] Cannot automatically add the host to the Default cluster: Cannot add Host. Host with the same address already