hi all, i ve 4 nodes running with current ovirt. I ve only a problem on one host even after a fresh installation . I ve installed the latest image. Than I add the node to the cluster Everything is working good. After this I configure the network. BUT, after a restart the host does not come up again. I got this error: blk_cloned_rq_check_limits: over max size limit every 5 seconds
I can continue with control-D or I can login with root password to fix the problem. but i dont know what is the problem and where does it came from I ve also changed the sas disk to nvme storage, but I ve changed this on every host. And this problem exists only on one host i found this https://lists.centos.org/pipermail/centos/2017-December/167727.html the output is [root@kvm380 ~]# ./test.sh Sys Block Node : Device max_sectors_kb max_hw_sectors_kb /sys/block/dm-0 : onn_kvm380-pool00_tmeta 256 4096 /sys/block/dm-1 : onn_kvm380-pool00_tdata 256 4096 /sys/block/dm-10 : onn_kvm380-var 256 4096 /sys/block/dm-11 : onn_kvm380-tmp 256 4096 /sys/block/dm-12 : onn_kvm380-home 256 4096 /sys/block/dm-13 : onn_kvm380-var_crash 256 4096 /sys/block/dm-2 : onn_kvm380-pool00-tpool 256 4096 /sys/block/dm-3 : onn_kvm380-ovirt--node--ng--4.3.7--0.20191121.0+1 256 4096 /sys/block/dm-4 : onn_kvm380-swap 256 4096 /sys/block/dm-5 : eui.0025385991b1e27a 512 2048 /sys/block/dm-6 : eui.0025385991b1e27a1 512 2048 /sys/block/dm-7 : onn_kvm380-pool00 256 4096 /sys/block/dm-8 : onn_kvm380-var_log_audit 256 4096 /sys/block/dm-9 : onn_kvm380-var_log 256 4096 cat: /sys/block/nvme0n1/device/vendor: Datei oder Verzeichnis nicht gefunden /sys/block/nvme0n1: Samsung SSD 970 EVO 1TB 512 2048 /sys/block/sda : HP LOGICAL VOLUME 256 4096 is the nvme not starting correct [root@kvm380 ~]# systemctl status multipathd ● multipathd.service - Device-Mapper Multipath Device Controller Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; vendor preset: enabled) Active: active (running) since Di 2019-12-31 16:16:32 CET; 31min ago Process: 1919 ExecStart=/sbin/multipathd (code=exited, status=0/SUCCESS) Process: 1916 ExecStartPre=/sbin/multipath -A (code=exited, status=0/SUCCESS) Process: 1911 ExecStartPre=/sbin/modprobe dm-multipath (code=exited, status=0/SUCCESS) Main PID: 1921 (multipathd) Tasks: 7 CGroup: /system.slice/multipathd.service └─1921 /sbin/multipathd Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: 259:0: reinstated Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: queue_if_no_path enabled Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Recovered to normal mode Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 1 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 why is it marked as failed? if i create a new volume with cockpit and use it for bricks for gluster, every thing is fine. until reboot maybe some one can point me the direction _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MHHFFWAY5T5BVTD5TAMW2R6PC6SMGGA2/
