Re: [ovirt-users] OVirt Node / RHEV-H and Multiple NICs/bond

2016-02-26 Thread Christopher Young
I should note that I was able to slowly work through this by adding the node to the engine, running the hosted-engine setup from within the node, removing the node via the Engine's WebUI when the conflict messages comes up, letting the hosted-engine setup finish. That's not ideal, but it works.

Re: [ovirt-users] OVirt Node / RHEV-H and Multiple NICs/bond

2016-02-26 Thread Christopher Young
Thanks for the advice. This DID work, however I've run into more (what I consider to be) ridiculousness: Running hosted-engine setup seems to assume that the host is not already added to the Default cluster (had an issue previously where I had renamed the cluster and that messed up the

Re: [ovirt-users] OVirt Node / RHEV-H and Multiple NICs/bond

2016-02-24 Thread Fabian Deutsch
Hey Christopher, On Tue, Feb 23, 2016 at 8:29 PM, Christopher Young wrote: > So, I have what I think should be a standard setup where I have > dedicated NICs (to be bonded via LACP for storage) and well are NICs > for various VLANS, etc. > > As typical, I have the main

[ovirt-users] OVirt Node / RHEV-H and Multiple NICs/bond

2016-02-23 Thread Christopher Young
So, I have what I think should be a standard setup where I have dedicated NICs (to be bonded via LACP for storage) and well are NICs for various VLANS, etc. As typical, I have the main system interfaces for the usual system IPs (em1 in this case). A couple of observations (and a "chicken and the