[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-21 Thread Sandro Bonazzola 
Il giorno lun 19 ott 2020 alle ore 19:03 Edward Berger 
ha scritto:

> with those packages installed I was able to run the single node
> hyperconverged wizard,
> but it fails during deploy "Hosted Engine Deployment" with
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages]
> [ ERROR ] fatal: [localhost -> testvirt.bil.psc.edu]: FAILED! =>
> {"changed": false, "failures": [], "msg": "Depsolve Error occured: \n
> Problem: cannot install the best update candidate for package
> ovirt-engine-metrics-1.4.1.1-1.el8.noarch\n - nothing provides
> rhel-system-roles >= 1.0-19 needed by
> ovirt-engine-metrics-1.4.2-1.el8.noarch", "rc": 1, "results": []}
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files]
> [ INFO ] changed: [localhost -> testvirt.bil.psc.edu]
>
> I can 'virsh console HostedEngineLocal' and yum update there says
> [root@testvirt ~]# yum update
> Last metadata expiration check: 0:03:58 ago on Mon 19 Oct 2020 12:52:54 PM
> EDT.
> Error:
>  Problem: cannot install the best update candidate for package
> ovirt-engine-metrics-1.4.1.1-1.el8.noarch
>   - nothing provides rhel-system-roles >= 1.0-19 needed by
> ovirt-engine-metrics-1.4.2-1.el8.noarch
> (try to add '--skip-broken' to skip uninstallable packages or '--nobest'
> to use not only best candidate packages)
>

Confirmed, in order to get rhel-system-roles >= 1.0-19 you need
https://buildlogs.centos.org/centos/8/virt/x86_64/ovirt-44/ repo
since that package can be promoted to release only at 4.4.3 GA.
Lev, worth adding this to the release note / announce for RC6.




>
>
>
>
>
> On Mon, Oct 19, 2020 at 12:25 PM Edward Berger 
> wrote:
>
>> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
>> and gluster-ansible-roles RPMs aren't installed,
>> with the ovirt-cockpit which pulls other dependencies.
>>
>> This caused the cockpit hyperconverged installer to fail. It mentions the
>> roles rpm but not the glusterfs
>> with the role installed, failure comes up when it tries to setup the
>> firewall for non-existing glusterfs-server.
>>
>> It is similarly missing on 4.4.2-release.
>> (the quick installation instructions are missing this or its a bug)
>>
>>
>> On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde  wrote:
>>
>>> oVirt 4.4.3 Fifth Release Candidate is now available for testing
>>>
>>> The oVirt Project is pleased to announce the availability of oVirt 4.4.3
>>> Fifth Release Candidate for testing, as of October 16th, 2020.
>>>
>>> This update is the third in a series of stabilization updates to the 4.4
>>> series.
>>> How to prevent hosts entering emergency mode after upgrade from oVirt
>>> 4.4.1
>>>
>>> Note: Upgrading from 4.4.2 GA should not require re-doing these steps,
>>> if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only
>>> required to be done once.
>>>
>>> Due to Bug 1837864  -
>>> Host enter emergency mode after upgrading to latest build
>>>
>>> If you have your root file system on a multipath device on your hosts
>>> you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get
>>> your host entering emergency mode.
>>>
>>> In order to prevent this be sure to upgrade oVirt Engine first, then on
>>> your hosts:
>>>
>>>1.
>>>
>>>Remove the current lvm filter while still on 4.4.1, or in emergency
>>>mode (if rebooted).
>>>2.
>>>
>>>Reboot.
>>>3.
>>>
>>>Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3).
>>>4.
>>>
>>>Run vdsm-tool config-lvm-filter to confirm there is a new filter in
>>>place.
>>>5.
>>>
>>>Only if not using oVirt Node:
>>>- run "dracut --force --add multipath” to rebuild initramfs with the
>>>correct filter configuration
>>>6.
>>>
>>>Reboot.
>>>
>>> Documentation
>>>
>>>-
>>>
>>>If you want to try oVirt as quickly as possible, follow the
>>>instructions on the Download  page.
>>>-
>>>
>>>For complete installation, administration, and usage instructions,
>>>see the oVirt Documentation .
>>>-
>>>
>>>For upgrading from a previous version, see the oVirt Upgrade Guide
>>>.
>>>-
>>>
>>>For a general overview of oVirt, see About oVirt
>>>.
>>>
>>> Important notes before you try it
>>>
>>> Please note this is a pre-release build.
>>>
>>> The oVirt Project makes no guarantees as to its suitability or
>>> usefulness.
>>>
>>> This pre-release must not be used in production.
>>> Installation instructions
>>>
>>> For installation instructions and additional information please refer to:
>>>
>>> https://ovirt.org/documentation/
>>>
>>> This release is available now on x86_64 architecture for:
>>>
>>> * Red Hat Enterprise Linux 8.2 or newer
>>>
>>>

[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-21 Thread Sandro Bonazzola 
Il giorno lun 19 ott 2020 alle ore 18:29 Edward Berger 
ha scritto:

> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
> and gluster-ansible-roles RPMs aren't installed,
> with the ovirt-cockpit which pulls other dependencies.
>

Checked this and this is by design. The glusterfs-server and
gluster-ansible-roles RPMs are considered optional so not installed by
default.
They are installed by default within oVirt Node because oVirt Node must
ensure to be able to deploy an hyperconverged system without additional
software.
We should probably update the Hyperconverged Guide

if
this part is missing. Can you please go over it and open an issue

if
it's not covered?

Thanks,
-- 

Sandro Bonazzola

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com


*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*


* *
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D3ER3NTNEZQWWI44FQ6Y7ISEVWGU3GMT/

[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-20 Thread Edward Berger 
On the HostedEngineLocal VM

[root@testvirt ~]# yum repolist enabled
repo id
repo name
AppStream
CentOS-8 - AppStream
BaseOS
 CentOS-8 - Base
PowerTools
 CentOS-8 - PowerTools
extras
 CentOS-8 - Extras
ovirt-4.4
Latest oVirt 4.4 Release
ovirt-4.4-advanced-virtualization
Advanced Virtualization packages for x86_64
ovirt-4.4-centos-gluster7
CentOS-8 - Gluster 7
ovirt-4.4-centos-opstools
CentOS-8 - OpsTools - collectd
ovirt-4.4-centos-ovirt44
 CentOS-8 - oVirt 4.4
ovirt-4.4-copr:copr.fedorainfracloud.org:mdbarroso:ovsdbapp
Copr repo for ovsdbapp owned by mdbarroso
ovirt-4.4-copr:copr.fedorainfracloud.org:networkmanager:NetworkManager-1.22
Copr repo for NetworkManager-1.22 owned by networkmanager
ovirt-4.4-copr:copr.fedorainfracloud.org:nmstate:nmstate-0.2
 Copr repo for nmstate-stable owned by nmstate
ovirt-4.4-copr:copr.fedorainfracloud.org:sac:gluster-ansible
 Copr repo for gluster-ansible owned by sac
ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection
 Copr repo for EL8_collection owned by sbonazzo
ovirt-4.4-epel
 Extra Packages for Enterprise Linux 8 - x86_64
ovirt-4.4-pre
oVirt 4.4 Pre-Release
ovirt-4.4-virtio-win-latest
virtio-win builds roughly matching what will be shipped in upcoming RHEL


and on the Hypervisor

[root@n001 ~]# yum repolist enabled
repo id
repo name
AppStream
CentOS-8 - AppStream
BaseOS
 CentOS-8 - Base
PowerTools
 CentOS-8 - PowerTools
extras
 CentOS-8 - Extras
ovirt-4.4
Latest oVirt 4.4 Release
ovirt-4.4-advanced-virtualization
Advanced Virtualization packages for x86_64
ovirt-4.4-centos-gluster7
CentOS-8 - Gluster 7
ovirt-4.4-centos-opstools
CentOS-8 - OpsTools - collectd
ovirt-4.4-centos-ovirt44
 CentOS-8 - oVirt 4.4
ovirt-4.4-copr:copr.fedorainfracloud.org:mdbarroso:ovsdbapp
Copr repo for ovsdbapp owned by mdbarroso
ovirt-4.4-copr:copr.fedorainfracloud.org:networkmanager:NetworkManager-1.22
Copr repo for NetworkManager-1.22 owned by networkmanager
ovirt-4.4-copr:copr.fedorainfracloud.org:nmstate:nmstate-0.2
 Copr repo for nmstate-stable owned by nmstate
ovirt-4.4-copr:copr.fedorainfracloud.org:sac:gluster-ansible
 Copr repo for gluster-ansible owned by sac
ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection
 Copr repo for EL8_collection owned by sbonazzo
ovirt-4.4-epel
 Extra Packages for Enterprise Linux 8 - x86_64
ovirt-4.4-pre
oVirt 4.4 Pre-Release
ovirt-4.4-virtio-win-latest
virtio-win builds roughly matching what will be shipped in upcoming RHEL



On Tue, Oct 20, 2020 at 4:54 AM Sandro Bonazzola 
wrote:

>
>
> Il giorno lun 19 ott 2020 alle ore 19:03 Edward Berger <
> edwber...@gmail.com> ha scritto:
>
>> with those packages installed I was able to run the single node
>> hyperconverged wizard,
>> but it fails during deploy "Hosted Engine Deployment" with
>> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages]
>> [ INFO ] skipping: [localhost]
>> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages]
>> [ ERROR ] fatal: [localhost -> testvirt.bil.psc.edu]: FAILED! =>
>> {"changed": false, "failures": [], "msg": "Depsolve Error occured: \n
>> Problem: cannot install the best update candidate for package
>> ovirt-engine-metrics-1.4.1.1-1.el8.noarch\n - nothing provides
>> rhel-system-roles >= 1.0-19 needed by
>> ovirt-engine-metrics-1.4.2-1.el8.noarch", "rc": 1, "results": []}
>> [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files]
>> [ INFO ] changed: [localhost -> testvirt.bil.psc.edu]
>>
>> I can 'virsh console HostedEngineLocal' and yum update there says
>> [root@testvirt ~]# yum update
>> Last metadata expiration check: 0:03:58 ago on Mon 19 Oct 2020 12:52:54
>> PM EDT.
>> Error:
>>  Problem: cannot install the best update candidate for package
>> ovirt-engine-metrics-1.4.1.1-1.el8.noarch
>>   - nothing provides rhel-system-roles >= 1.0-19 needed by
>> ovirt-engine-metrics-1.4.2-1.el8.noarch
>> (try to add '--skip-broken' to skip uninstallable packages or '--nobest'
>> to use not only best candidate packages)
>>
>>
>>
> can you please provide output of: "yum repolist enabled" ?
> thanks
>
>
>
>
>
>>
>>
>>
>> On Mon, Oct 19, 2020 at 12:25 PM Edward Berger 
>> wrote:
>>
>>> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
>>> and gluster-ansible-roles RPMs aren't installed,
>>> with the ovirt-cockpit which pulls other dependencies.
>>>
>>> This caused the cockpit hyperconverged installer to fail. It mentions
>>> the roles rpm but not the glusterfs
>>> with the role installed, failure comes up when it tries to setup the
>>> firewall for non-existing glusterfs-server.
>>>
>>> It is similarly missing on 4.4.2-release.
>>> (the quick installation instructions are missing this or its a bug)
>>>
>>>
>>> On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde  wrote:
>>>
 oVirt 4.4.3 Fifth Release Candidate is now available for testing

 The oVirt Project is pleased to announce the availability of oVirt
 4.4.3 Fifth Release Candidate for testing, as of October 16th, 2020.

 This update is

[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-20 Thread Sandro Bonazzola 
Il giorno lun 19 ott 2020 alle ore 19:03 Edward Berger 
ha scritto:

> with those packages installed I was able to run the single node
> hyperconverged wizard,
> but it fails during deploy "Hosted Engine Deployment" with
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages]
> [ ERROR ] fatal: [localhost -> testvirt.bil.psc.edu]: FAILED! =>
> {"changed": false, "failures": [], "msg": "Depsolve Error occured: \n
> Problem: cannot install the best update candidate for package
> ovirt-engine-metrics-1.4.1.1-1.el8.noarch\n - nothing provides
> rhel-system-roles >= 1.0-19 needed by
> ovirt-engine-metrics-1.4.2-1.el8.noarch", "rc": 1, "results": []}
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files]
> [ INFO ] changed: [localhost -> testvirt.bil.psc.edu]
>
> I can 'virsh console HostedEngineLocal' and yum update there says
> [root@testvirt ~]# yum update
> Last metadata expiration check: 0:03:58 ago on Mon 19 Oct 2020 12:52:54 PM
> EDT.
> Error:
>  Problem: cannot install the best update candidate for package
> ovirt-engine-metrics-1.4.1.1-1.el8.noarch
>   - nothing provides rhel-system-roles >= 1.0-19 needed by
> ovirt-engine-metrics-1.4.2-1.el8.noarch
> (try to add '--skip-broken' to skip uninstallable packages or '--nobest'
> to use not only best candidate packages)
>
>
>
can you please provide output of: "yum repolist enabled" ?
thanks





>
>
>
> On Mon, Oct 19, 2020 at 12:25 PM Edward Berger 
> wrote:
>
>> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
>> and gluster-ansible-roles RPMs aren't installed,
>> with the ovirt-cockpit which pulls other dependencies.
>>
>> This caused the cockpit hyperconverged installer to fail. It mentions the
>> roles rpm but not the glusterfs
>> with the role installed, failure comes up when it tries to setup the
>> firewall for non-existing glusterfs-server.
>>
>> It is similarly missing on 4.4.2-release.
>> (the quick installation instructions are missing this or its a bug)
>>
>>
>> On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde  wrote:
>>
>>> oVirt 4.4.3 Fifth Release Candidate is now available for testing
>>>
>>> The oVirt Project is pleased to announce the availability of oVirt 4.4.3
>>> Fifth Release Candidate for testing, as of October 16th, 2020.
>>>
>>> This update is the third in a series of stabilization updates to the 4.4
>>> series.
>>> How to prevent hosts entering emergency mode after upgrade from oVirt
>>> 4.4.1
>>>
>>> Note: Upgrading from 4.4.2 GA should not require re-doing these steps,
>>> if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only
>>> required to be done once.
>>>
>>> Due to Bug 1837864  -
>>> Host enter emergency mode after upgrading to latest build
>>>
>>> If you have your root file system on a multipath device on your hosts
>>> you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get
>>> your host entering emergency mode.
>>>
>>> In order to prevent this be sure to upgrade oVirt Engine first, then on
>>> your hosts:
>>>
>>>1.
>>>
>>>Remove the current lvm filter while still on 4.4.1, or in emergency
>>>mode (if rebooted).
>>>2.
>>>
>>>Reboot.
>>>3.
>>>
>>>Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3).
>>>4.
>>>
>>>Run vdsm-tool config-lvm-filter to confirm there is a new filter in
>>>place.
>>>5.
>>>
>>>Only if not using oVirt Node:
>>>- run "dracut --force --add multipath” to rebuild initramfs with the
>>>correct filter configuration
>>>6.
>>>
>>>Reboot.
>>>
>>> Documentation
>>>
>>>-
>>>
>>>If you want to try oVirt as quickly as possible, follow the
>>>instructions on the Download  page.
>>>-
>>>
>>>For complete installation, administration, and usage instructions,
>>>see the oVirt Documentation .
>>>-
>>>
>>>For upgrading from a previous version, see the oVirt Upgrade Guide
>>>.
>>>-
>>>
>>>For a general overview of oVirt, see About oVirt
>>>.
>>>
>>> Important notes before you try it
>>>
>>> Please note this is a pre-release build.
>>>
>>> The oVirt Project makes no guarantees as to its suitability or
>>> usefulness.
>>>
>>> This pre-release must not be used in production.
>>> Installation instructions
>>>
>>> For installation instructions and additional information please refer to:
>>>
>>> https://ovirt.org/documentation/
>>>
>>> This release is available now on x86_64 architecture for:
>>>
>>> * Red Hat Enterprise Linux 8.2 or newer
>>>
>>> * CentOS Linux (or similar) 8.2 or newer
>>>
>>> This release supports Hypervisor Hosts on x86_64 and ppc64le
>>> architectures for:
>>>
>>> * Red Hat Enterprise Linux 8.2 or newer
>>>
>>> *

[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-19 Thread Edward Berger 
with those packages installed I was able to run the single node
hyperconverged wizard,
but it fails during deploy "Hosted Engine Deployment" with
[ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages]
[ ERROR ] fatal: [localhost -> testvirt.bil.psc.edu]: FAILED! =>
{"changed": false, "failures": [], "msg": "Depsolve Error occured: \n
Problem: cannot install the best update candidate for package
ovirt-engine-metrics-1.4.1.1-1.el8.noarch\n - nothing provides
rhel-system-roles >= 1.0-19 needed by
ovirt-engine-metrics-1.4.2-1.el8.noarch", "rc": 1, "results": []}
[ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files]
[ INFO ] changed: [localhost -> testvirt.bil.psc.edu]

I can 'virsh console HostedEngineLocal' and yum update there says
[root@testvirt ~]# yum update
Last metadata expiration check: 0:03:58 ago on Mon 19 Oct 2020 12:52:54 PM
EDT.
Error:
 Problem: cannot install the best update candidate for package
ovirt-engine-metrics-1.4.1.1-1.el8.noarch
  - nothing provides rhel-system-roles >= 1.0-19 needed by
ovirt-engine-metrics-1.4.2-1.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to
use not only best candidate packages)





On Mon, Oct 19, 2020 at 12:25 PM Edward Berger  wrote:

> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
> and gluster-ansible-roles RPMs aren't installed,
> with the ovirt-cockpit which pulls other dependencies.
>
> This caused the cockpit hyperconverged installer to fail. It mentions the
> roles rpm but not the glusterfs
> with the role installed, failure comes up when it tries to setup the
> firewall for non-existing glusterfs-server.
>
> It is similarly missing on 4.4.2-release.
> (the quick installation instructions are missing this or its a bug)
>
>
> On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde  wrote:
>
>> oVirt 4.4.3 Fifth Release Candidate is now available for testing
>>
>> The oVirt Project is pleased to announce the availability of oVirt 4.4.3
>> Fifth Release Candidate for testing, as of October 16th, 2020.
>>
>> This update is the third in a series of stabilization updates to the 4.4
>> series.
>> How to prevent hosts entering emergency mode after upgrade from oVirt
>> 4.4.1
>>
>> Note: Upgrading from 4.4.2 GA should not require re-doing these steps, if
>> already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only
>> required to be done once.
>>
>> Due to Bug 1837864  -
>> Host enter emergency mode after upgrading to latest build
>>
>> If you have your root file system on a multipath device on your hosts you
>> should be aware that after upgrading from 4.4.1 to 4.4.3 you may get your
>> host entering emergency mode.
>>
>> In order to prevent this be sure to upgrade oVirt Engine first, then on
>> your hosts:
>>
>>1.
>>
>>Remove the current lvm filter while still on 4.4.1, or in emergency
>>mode (if rebooted).
>>2.
>>
>>Reboot.
>>3.
>>
>>Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3).
>>4.
>>
>>Run vdsm-tool config-lvm-filter to confirm there is a new filter in
>>place.
>>5.
>>
>>Only if not using oVirt Node:
>>- run "dracut --force --add multipath” to rebuild initramfs with the
>>correct filter configuration
>>6.
>>
>>Reboot.
>>
>> Documentation
>>
>>-
>>
>>If you want to try oVirt as quickly as possible, follow the
>>instructions on the Download  page.
>>-
>>
>>For complete installation, administration, and usage instructions,
>>see the oVirt Documentation .
>>-
>>
>>For upgrading from a previous version, see the oVirt Upgrade Guide
>>.
>>-
>>
>>For a general overview of oVirt, see About oVirt
>>.
>>
>> Important notes before you try it
>>
>> Please note this is a pre-release build.
>>
>> The oVirt Project makes no guarantees as to its suitability or usefulness.
>>
>> This pre-release must not be used in production.
>> Installation instructions
>>
>> For installation instructions and additional information please refer to:
>>
>> https://ovirt.org/documentation/
>>
>> This release is available now on x86_64 architecture for:
>>
>> * Red Hat Enterprise Linux 8.2 or newer
>>
>> * CentOS Linux (or similar) 8.2 or newer
>>
>> This release supports Hypervisor Hosts on x86_64 and ppc64le
>> architectures for:
>>
>> * Red Hat Enterprise Linux 8.2 or newer
>>
>> * CentOS Linux (or similar) 8.2 or newer
>>
>> * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only)
>>
>> See the release notes [1] for installation instructions and a list of new
>> features and bugs fixed.
>>
>> Notes:
>>
>> - oVirt Appliance is already available for CentOS Linux 8
>>
>> -

[ovirt-users] Re: [ANN] oVirt 4.4.3 Fifth Release Candidate is now available for testing

2020-10-19 Thread Edward Berger 
 I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server
and gluster-ansible-roles RPMs aren't installed,
with the ovirt-cockpit which pulls other dependencies.

This caused the cockpit hyperconverged installer to fail. It mentions the
roles rpm but not the glusterfs
with the role installed, failure comes up when it tries to setup the
firewall for non-existing glusterfs-server.

It is similarly missing on 4.4.2-release.
(the quick installation instructions are missing this or its a bug)


On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde  wrote:

> oVirt 4.4.3 Fifth Release Candidate is now available for testing
>
> The oVirt Project is pleased to announce the availability of oVirt 4.4.3
> Fifth Release Candidate for testing, as of October 16th, 2020.
>
> This update is the third in a series of stabilization updates to the 4.4
> series.
> How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1
>
> Note: Upgrading from 4.4.2 GA should not require re-doing these steps, if
> already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only
> required to be done once.
>
> Due to Bug 1837864  -
> Host enter emergency mode after upgrading to latest build
>
> If you have your root file system on a multipath device on your hosts you
> should be aware that after upgrading from 4.4.1 to 4.4.3 you may get your
> host entering emergency mode.
>
> In order to prevent this be sure to upgrade oVirt Engine first, then on
> your hosts:
>
>1.
>
>Remove the current lvm filter while still on 4.4.1, or in emergency
>mode (if rebooted).
>2.
>
>Reboot.
>3.
>
>Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3).
>4.
>
>Run vdsm-tool config-lvm-filter to confirm there is a new filter in
>place.
>5.
>
>Only if not using oVirt Node:
>- run "dracut --force --add multipath” to rebuild initramfs with the
>correct filter configuration
>6.
>
>Reboot.
>
> Documentation
>
>-
>
>If you want to try oVirt as quickly as possible, follow the
>instructions on the Download  page.
>-
>
>For complete installation, administration, and usage instructions, see
>the oVirt Documentation .
>-
>
>For upgrading from a previous version, see the oVirt Upgrade Guide
>.
>-
>
>For a general overview of oVirt, see About oVirt
>.
>
> Important notes before you try it
>
> Please note this is a pre-release build.
>
> The oVirt Project makes no guarantees as to its suitability or usefulness.
>
> This pre-release must not be used in production.
> Installation instructions
>
> For installation instructions and additional information please refer to:
>
> https://ovirt.org/documentation/
>
> This release is available now on x86_64 architecture for:
>
> * Red Hat Enterprise Linux 8.2 or newer
>
> * CentOS Linux (or similar) 8.2 or newer
>
> This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
> for:
>
> * Red Hat Enterprise Linux 8.2 or newer
>
> * CentOS Linux (or similar) 8.2 or newer
>
> * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only)
>
> See the release notes [1] for installation instructions and a list of new
> features and bugs fixed.
>
> Notes:
>
> - oVirt Appliance is already available for CentOS Linux 8
>
> - oVirt Node NG is already available for CentOS Linux 8
>
> Additional Resources:
>
> * Read more about the oVirt 4.4.3 release highlights:
> http://www.ovirt.org/release/4.4.3/
>
> * Get more oVirt project updates on Twitter: https://twitter.com/ovirt
>
> * Check out the latest project news on the oVirt blog:
> http://www.ovirt.org/blog/
>
>
> [1] http://www.ovirt.org/release/4.4.3/
>
> [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/
>
> --
>
> Lev Veyde
>
> Senior Software Engineer, RHCE | RHCVA | MCITP
>
> Red Hat Israel
>
> 
>
> l...@redhat.com | lve...@redhat.com
> 
> TRIED. TESTED. TRUSTED. 
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/3CRWW4EMTGHRVGGJM6EY4DUEEM6QJKBI/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: