Fixed. Thanks for the help! This is specific to our CSP, but some thoughts that
might help:
- Utilities like tcpdump were helpful in analysis. It ultimately ended up being
network issues (rather than SSL or something in the oVirt setup).
- In my environment, the host had two NICs, and the FQDN of
If it helps, I had to create a network called ovirtmgmt.
This was my network setup
Configure 2 nics to be in a bond.
Configure a bond with the bridge being ovirtmgmt
Configure a bridge called ovirtmgmt with a static up.
Make sure ovirtmgmt is DEFROUTE=Yes
Sent from my iPhone
> On 3 May 2021,
Some new information: I found that the VDSM traffic (anything not SSH) was
being blocked by the default network security rules (not on the host).
After fixing this, I am still unable to add a host though.
If I try
vdsm-client -a Host getCapabilities
I get this error:
[SSL: CERTIFICATE_VERIFY_FAIL
I'll research this. Could you give me some more details on what to do?
Can I use vdsm-client -a to test this as well?
On Mon, May 3, 2021 at 2:26 AM Ales Musil wrote:
> I can see some ssl handshake: SSLError.
>
> I would recommend reinstalling certificates from the engine.
>
> Regards,
> Ales
I can see some ssl handshake: SSLError.
I would recommend reinstalling certificates from the engine.
Regards,
Ales
On Sun, May 2, 2021 at 2:50 PM Alan Daniels wrote:
> Logs can be found here:
> https://www.dropbox.com/s/vdvkj7kp0d4d73v/vdsmlogs.tar.gz?dl=0
>
> Couldn't attach them directly due
Logs can be found here:
https://www.dropbox.com/s/vdvkj7kp0d4d73v/vdsmlogs.tar.gz?dl=0
Couldn't attach them directly due to size limits.
Thanks!
- Alan
On Fri, Apr 30, 2021 at 3:06 AM Ales Musil wrote:
>
>
> On Wed, Apr 28, 2021 at 3:09 PM wrote:
>
>> oVirt version: 4.3
>> - ovirt-engine-appl
On Wed, Apr 28, 2021 at 3:09 PM wrote:
> oVirt version: 4.3
> - ovirt-engine-appliance.x86_64 4.3-20200603.1.0.2.el7
> vdsm version: 4.30.46-1.0.3.el7
>
> I can connect to the host manually. If I supply invalid SSH args when
> adding the host, it fails immediately rather than running for
oVirt version: 4.3
- ovirt-engine-appliance.x86_64 4.3-20200603.1.0.2.el7
vdsm version: 4.30.46-1.0.3.el7
I can connect to the host manually. If I supply invalid SSH args when adding
the host, it fails immediately rather than running for a while and failing
later.
___
On Wed, Apr 28, 2021 at 7:16 AM wrote:
> I am using Oracle Linux Virtualization Manager, following this guide:
> https://docs.oracle.com/en/virtualization/oracle-linux-virtualization-manager/getstart/manager-install.html
>
> After adding a host to the engine, the host becomes non responsive due t
9 matches
Mail list logo