[ovirt-users] Re: Controller recomandation - LSI2008/9265
At least , based on spec I would prefer LSI9265-8i as it supports hot spare, SSD support , cache and set it up in Raid 0 - but only in a replica 3 or replica 3 arbiter 1 volumes. Best Regards,Strahil Nikolov В петък, 5 април 2019 г., 9:20:57 ч. Гринуич+3, Leo David написа: Thank you Strahil for that. On Fri, Apr 5, 2019, 06:45 Strahil wrote: Adding Gluster users' mail list. On Apr 5, 2019 06:02, Leo David wrote: Hi Everyone,Any thoughts on this ? On Wed, Apr 3, 2019, 17:02 Leo David wrote: Hi Everyone,For a hyperconverged setup started with 3 nodes and going up in time up to 12 nodes, I have to choose between LSI2008 ( jbod ) and LSI9265 (raid).Perc h710 ( raid ) might be an option too, but on a different chassis.There will not be many disk installed on each node, so the replication will be replica 3 replicated-distribute volumes across the nodes as:node1/disk1 node2/disk1 node3/disk1node1/disk2 node2/disk2 node3/disk2and so on... As i will add nodes to the cluster , I intend expand the volumes using the same rule.What would it be a better way, to used jbod cards ( no cache ) or raid card and create raid0 arrays ( one for each disk ) and therefore have a bit of raid cache ( 512Mb ) ?Is raid caching a benefit to have it underneath ovirt/gluster as long as I go for "Jbod" installation anyway ?Thank you very much ! -- Best regards, Leo David ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STI7U7LTOXSSH6WUNHX63WDIF2LZ46K/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VPQXXCANJNLY7NSBCPBGAL6EITRM5BO6/
[ovirt-users] Re: Controller recomandation - LSI2008/9265
Thank you Strahil for that. On Fri, Apr 5, 2019, 06:45 Strahil wrote: > Adding Gluster users' mail list. > On Apr 5, 2019 06:02, Leo David wrote: > > Hi Everyone, > Any thoughts on this ? > > > On Wed, Apr 3, 2019, 17:02 Leo David wrote: > > Hi Everyone, > For a hyperconverged setup started with 3 nodes and going up in time up to > 12 nodes, I have to choose between LSI2008 ( jbod ) and LSI9265 (raid). > Perc h710 ( raid ) might be an option too, but on a different chassis. > There will not be many disk installed on each node, so the replication > will be replica 3 replicated-distribute volumes across the nodes as: > node1/disk1 node2/disk1 node3/disk1 > node1/disk2 node2/disk2 node3/disk2 > and so on... > As i will add nodes to the cluster , I intend expand the volumes using > the same rule. > What would it be a better way, to used jbod cards ( no cache ) or raid > card and create raid0 arrays ( one for each disk ) and therefore have a bit > of raid cache ( 512Mb ) ? > Is raid caching a benefit to have it underneath ovirt/gluster as long as I > go for "Jbod" installation anyway ? > Thank you very much ! > -- > Best regards, Leo David > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STI7U7LTOXSSH6WUNHX63WDIF2LZ46K/
[ovirt-users] Re: Controller recomandation - LSI2008/9265
Adding Gluster users' mail list.On Apr 5, 2019 06:02, Leo David wrote: > > Hi Everyone, > Any thoughts on this ? > > > On Wed, Apr 3, 2019, 17:02 Leo David wrote: >> >> Hi Everyone, >> For a hyperconverged setup started with 3 nodes and going up in time up to >> 12 nodes, I have to choose between LSI2008 ( jbod ) and LSI9265 (raid). >> Perc h710 ( raid ) might be an option too, but on a different chassis. >> There will not be many disk installed on each node, so the replication will >> be replica 3 replicated-distribute volumes across the nodes as: >> node1/disk1 node2/disk1 node3/disk1 >> node1/disk2 node2/disk2 node3/disk2 >> and so on... >> As i will add nodes to the cluster , I intend expand the volumes using the >> same rule. >> What would it be a better way, to used jbod cards ( no cache ) or raid card >> and create raid0 arrays ( one for each disk ) and therefore have a bit of >> raid cache ( 512Mb ) ? >> Is raid caching a benefit to have it underneath ovirt/gluster as long as I >> go for "Jbod" installation anyway ? >> Thank you very much ! >> -- >> Best regards, Leo David___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGNB4NMSXZ6MQU6IJUUO3KUTUXB4GO6Y/
[ovirt-users] Re: Controller recomandation - LSI2008/9265
Hi Everyone, Any thoughts on this ? On Wed, Apr 3, 2019, 17:02 Leo David wrote: > Hi Everyone, > For a hyperconverged setup started with 3 nodes and going up in time up to > 12 nodes, I have to choose between LSI2008 ( jbod ) and LSI9265 (raid). > Perc h710 ( raid ) might be an option too, but on a different chassis. > There will not be many disk installed on each node, so the replication > will be replica 3 replicated-distribute volumes across the nodes as: > node1/disk1 node2/disk1 node3/disk1 > node1/disk2 node2/disk2 node3/disk2 > and so on... > As i will add nodes to the cluster , I intend expand the volumes using > the same rule. > What would it be a better way, to used jbod cards ( no cache ) or raid > card and create raid0 arrays ( one for each disk ) and therefore have a bit > of raid cache ( 512Mb ) ? > Is raid caching a benefit to have it underneath ovirt/gluster as long as I > go for "Jbod" installation anyway ? > Thank you very much ! > -- > Best regards, Leo David > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LVFAIC3GSJ7V5VVTIITXTZHRIVSO7UW3/
