[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-27 Thread Simone Tiraboschi
On Tue, Nov 27, 2018 at 8:45 AM Edward Haas  wrote:

> Where did you managed to get a 4.1 version from?
> I would recommend using a supported version (4.2).
>
> On Mon, Nov 26, 2018 at 1:20 PM gregor  wrote:
>
>> During installation the firewall was enable or changed therefore I get
>> an "NoRouteToHostException" from the Engine to the Host.
>> After disabling the firewall on the Host the Data Center and VM's are up
>> and running.
>>
>> regards
>> gregor
>>
>> Am 26.11.18 um 07:50 schrieb gregor:
>> > The Engine is up but the host stucks in NonResponsive.
>> >
>> > The Webinterface stuck in "hanlding non respsonsive host". "Validating"
>> > is green and "Executing" is spinning.
>> >
>> > Can anybody help?
>> > I found no errors in the logs under /var/log/ovirt-hosted-engine-ha and
>> > journalclt
>> >
>> > regards
>> > gregor
>> >
>> >
>> > Am 26.11.18 um 07:35 schrieb gregor:
>> >> I was able to change the maintenance state in the database to finish
>> the
>> >> upgrade with engine-setup.
>> >>
>> >> these are the lines:
>> >>
>> >> select vds_id,ha_global_maintenance from vds_statistics where vds_id =
>> >> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>> >> update vds_statistics set ha_global_maintenance = 't' where vds_id =
>> >> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>> >>
>> >> Now it's time to wait if the host and engine can reboot and start the
>> vm's.
>> >>
>> >> regards
>> >> gregor
>> >>
>> >> Am 26.11.18 um 06:07 schrieb gregor:
>> >>> Hello,
>> >>>
>> >>> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
>> >>> problem with another host, in another network, where the Global
>> >>> Maintenance mode is not recognized by engine-setup.
>>
>> >>> Is there a way to force the setup or set the maintenance mode inside
>> the
>> >>> database?
>>
>>
Global maintenance is an hosted-engine specific concept.
Are you using hosted-engine?
Did you really set the global maintenace?



> >>> One problem can be that an the host was accidentally upgraded to 4.1
>> >>> before I upgraded the engine.
>> >>>
>> >>> kind regards
>> >>> gregor
>> >>> ___
>> >>> Users mailing list -- users@ovirt.org
>> >>> To unsubscribe send an email to users-le...@ovirt.org
>> >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> >>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> >>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
>> >>>
>> >> ___
>> >> Users mailing list -- users@ovirt.org
>> >> To unsubscribe send an email to users-le...@ovirt.org
>> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> >> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> >> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/
>> >>
>> > ___
>> > Users mailing list -- users@ovirt.org
>> > To unsubscribe send an email to users-le...@ovirt.org
>> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> > oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7M2HF3S6UHCLR7QK2AU2GZBN7DGPEHBF/
>> >
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/P2EVD5IRRG7YUXD36KKJ74YXFXMKX4RG/
>>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZMOAUEFF33KNJSCMCPCJAZGWBNC267WP/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LRNSH5NKJR2EB6JOY6PJXTCHPBSLZ6G6/


[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-26 Thread Edward Haas
Where did you managed to get a 4.1 version from?
I would recommend using a supported version (4.2).

On Mon, Nov 26, 2018 at 1:20 PM gregor  wrote:

> During installation the firewall was enable or changed therefore I get
> an "NoRouteToHostException" from the Engine to the Host.
> After disabling the firewall on the Host the Data Center and VM's are up
> and running.
>
> regards
> gregor
>
> Am 26.11.18 um 07:50 schrieb gregor:
> > The Engine is up but the host stucks in NonResponsive.
> >
> > The Webinterface stuck in "hanlding non respsonsive host". "Validating"
> > is green and "Executing" is spinning.
> >
> > Can anybody help?
> > I found no errors in the logs under /var/log/ovirt-hosted-engine-ha and
> > journalclt
> >
> > regards
> > gregor
> >
> >
> > Am 26.11.18 um 07:35 schrieb gregor:
> >> I was able to change the maintenance state in the database to finish the
> >> upgrade with engine-setup.
> >>
> >> these are the lines:
> >>
> >> select vds_id,ha_global_maintenance from vds_statistics where vds_id =
> >> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
> >> update vds_statistics set ha_global_maintenance = 't' where vds_id =
> >> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
> >>
> >> Now it's time to wait if the host and engine can reboot and start the
> vm's.
> >>
> >> regards
> >> gregor
> >>
> >> Am 26.11.18 um 06:07 schrieb gregor:
> >>> Hello,
> >>>
> >>> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
> >>> problem with another host, in another network, where the Global
> >>> Maintenance mode is not recognized by engine-setup.
> >>>
> >>> Is there a way to force the setup or set the maintenance mode inside
> the
> >>> database?
> >>>
> >>> One problem can be that an the host was accidentally upgraded to 4.1
> >>> before I upgraded the engine.
> >>>
> >>> kind regards
> >>> gregor
> >>> ___
> >>> Users mailing list -- users@ovirt.org
> >>> To unsubscribe send an email to users-le...@ovirt.org
> >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> >>> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> >>> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
> >>>
> >> ___
> >> Users mailing list -- users@ovirt.org
> >> To unsubscribe send an email to users-le...@ovirt.org
> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> >> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/
> >>
> > ___
> > Users mailing list -- users@ovirt.org
> > To unsubscribe send an email to users-le...@ovirt.org
> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7M2HF3S6UHCLR7QK2AU2GZBN7DGPEHBF/
> >
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/P2EVD5IRRG7YUXD36KKJ74YXFXMKX4RG/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZMOAUEFF33KNJSCMCPCJAZGWBNC267WP/


[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-26 Thread gregor
During installation the firewall was enable or changed therefore I get
an "NoRouteToHostException" from the Engine to the Host.
After disabling the firewall on the Host the Data Center and VM's are up
and running.

regards
gregor

Am 26.11.18 um 07:50 schrieb gregor:
> The Engine is up but the host stucks in NonResponsive.
> 
> The Webinterface stuck in "hanlding non respsonsive host". "Validating"
> is green and "Executing" is spinning.
> 
> Can anybody help?
> I found no errors in the logs under /var/log/ovirt-hosted-engine-ha and
> journalclt
> 
> regards
> gregor
> 
> 
> Am 26.11.18 um 07:35 schrieb gregor:
>> I was able to change the maintenance state in the database to finish the
>> upgrade with engine-setup.
>>
>> these are the lines:
>>
>> select vds_id,ha_global_maintenance from vds_statistics where vds_id =
>> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>> update vds_statistics set ha_global_maintenance = 't' where vds_id =
>> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>>
>> Now it's time to wait if the host and engine can reboot and start the vm's.
>>
>> regards
>> gregor
>>
>> Am 26.11.18 um 06:07 schrieb gregor:
>>> Hello,
>>>
>>> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
>>> problem with another host, in another network, where the Global
>>> Maintenance mode is not recognized by engine-setup.
>>>
>>> Is there a way to force the setup or set the maintenance mode inside the
>>> database?
>>>
>>> One problem can be that an the host was accidentally upgraded to 4.1
>>> before I upgraded the engine.
>>>
>>> kind regards
>>> gregor
>>> ___
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct: 
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives: 
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
>>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/
>>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7M2HF3S6UHCLR7QK2AU2GZBN7DGPEHBF/
> 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/P2EVD5IRRG7YUXD36KKJ74YXFXMKX4RG/


[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-26 Thread gregor
After a reboot the complete installation was gone. No automounts, no
engine nothing. Luckily the files where there.

Now I reinstall the whole host + engine fresh and import the existend
vm's :-(

Am 26.11.18 um 07:50 schrieb gregor:
> The Engine is up but the host stucks in NonResponsive.
> 
> The Webinterface stuck in "hanlding non respsonsive host". "Validating"
> is green and "Executing" is spinning.
> 
> Can anybody help?
> I found no errors in the logs under /var/log/ovirt-hosted-engine-ha and
> journalclt
> 
> regards
> gregor
> 
> 
> Am 26.11.18 um 07:35 schrieb gregor:
>> I was able to change the maintenance state in the database to finish the
>> upgrade with engine-setup.
>>
>> these are the lines:
>>
>> select vds_id,ha_global_maintenance from vds_statistics where vds_id =
>> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>> update vds_statistics set ha_global_maintenance = 't' where vds_id =
>> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
>>
>> Now it's time to wait if the host and engine can reboot and start the vm's.
>>
>> regards
>> gregor
>>
>> Am 26.11.18 um 06:07 schrieb gregor:
>>> Hello,
>>>
>>> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
>>> problem with another host, in another network, where the Global
>>> Maintenance mode is not recognized by engine-setup.
>>>
>>> Is there a way to force the setup or set the maintenance mode inside the
>>> database?
>>>
>>> One problem can be that an the host was accidentally upgraded to 4.1
>>> before I upgraded the engine.
>>>
>>> kind regards
>>> gregor
>>> ___
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct: 
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives: 
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
>>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/
>>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7M2HF3S6UHCLR7QK2AU2GZBN7DGPEHBF/
> 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RCOUHMNJH7AGIBZYKWIMISX5FTVMBDPU/


[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-25 Thread gregor
The Engine is up but the host stucks in NonResponsive.

The Webinterface stuck in "hanlding non respsonsive host". "Validating"
is green and "Executing" is spinning.

Can anybody help?
I found no errors in the logs under /var/log/ovirt-hosted-engine-ha and
journalclt

regards
gregor


Am 26.11.18 um 07:35 schrieb gregor:
> I was able to change the maintenance state in the database to finish the
> upgrade with engine-setup.
> 
> these are the lines:
> 
> select vds_id,ha_global_maintenance from vds_statistics where vds_id =
> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
> update vds_statistics set ha_global_maintenance = 't' where vds_id =
> '706599d5-2dbc-400c-b9da-5b5906de6dbd';
> 
> Now it's time to wait if the host and engine can reboot and start the vm's.
> 
> regards
> gregor
> 
> Am 26.11.18 um 06:07 schrieb gregor:
>> Hello,
>>
>> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
>> problem with another host, in another network, where the Global
>> Maintenance mode is not recognized by engine-setup.
>>
>> Is there a way to force the setup or set the maintenance mode inside the
>> database?
>>
>> One problem can be that an the host was accidentally upgraded to 4.1
>> before I upgraded the engine.
>>
>> kind regards
>> gregor
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
>>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/
> 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7M2HF3S6UHCLR7QK2AU2GZBN7DGPEHBF/


[ovirt-users] Re: Upgrade 4.0 to 4.1: Global Maintenance Mode not recognized

2018-11-25 Thread gregor
I was able to change the maintenance state in the database to finish the
upgrade with engine-setup.

these are the lines:

select vds_id,ha_global_maintenance from vds_statistics where vds_id =
'706599d5-2dbc-400c-b9da-5b5906de6dbd';
update vds_statistics set ha_global_maintenance = 't' where vds_id =
'706599d5-2dbc-400c-b9da-5b5906de6dbd';

Now it's time to wait if the host and engine can reboot and start the vm's.

regards
gregor

Am 26.11.18 um 06:07 schrieb gregor:
> Hello,
> 
> I upgraded one host from 4.0 to 4.1 without problems. Now I have a
> problem with another host, in another network, where the Global
> Maintenance mode is not recognized by engine-setup.
> 
> Is there a way to force the setup or set the maintenance mode inside the
> database?
> 
> One problem can be that an the host was accidentally upgraded to 4.1
> before I upgraded the engine.
> 
> kind regards
> gregor
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQOX7YHHW3GTYEOP5YMG6NF2OD4BHUC7/
> 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TLXT24MHJHSPQDI7ENVVJO2WVOBHHLB4/