On 5/30/20 3:48 PM, Jp wrote:
> I'm running oVirt + Gluster in HCI config and had similar questions
> as you when building it out.
I think it would be nice to have some (best practice) design guides...
but there are so many possibilities how to build a oVirt cluster... This
time I try to build
On 5/29/20 5:27 PM, Jayme wrote:
> Also, I can't think of the limit off the top of my head. I believe it's
> either 75 or 100Gb. If the engine volume is set any lower the
> installation will fail. There is a minimum size requirement.
thanks for reply. Meantime I was looking into RHV 4.4 beta docs
I'm running oVirt + Gluster in HCI config and had similar questions as you when
building it out.
>- single point of failure in this router (not really - just in case oVirt is
>badly broken and I need to access internal vlans to recover it)
There is no SPOF if you're doing 3x HCI nodes. I
Last time I used oVirt to deploy my gluster, cockpit was using thick LVs
instead of thin LVM.
I think that thin LVM is way more suitable for the task. Then you can set the
size to anything needed.
На 29 май 2020 г. 18:27:59 GMT+03:00, Jayme написа:
Also, I can't think of the limit off the top of my head. I believe it's
either 75 or 100Gb. If the engine volume is set any lower the installation
will fail. There is a minimum size requirement.
On Fri, May 29, 2020 at 12:09 PM Jayme wrote:
> Regarding Gluster question. The volumes would be
Regarding Gluster question. The volumes would be provisioned with LVM on
the same block device. I believe 100Gb is recommended for the engine
volume. The other volumes such as data would be created on another logical
volume and you can use up the rest of the available space there. Ex. 100gb
Mail list logo