[ovirt-users] Re: hosted-engine and GlusterFS on Vlan help

2019-05-14 Thread Sahina Bose
On Tue, Oct 4, 2016 at 9:51 PM, Hanson  wrote:

> Running iperf3 between node1 & node2, I can achieve almost 10gbps without
> ever going out to the gateway...
>
> So switching between port to port on the switch is working properly on the
> vlan.
>
> This must be a problem in the gluster settings? Where do I start
> troubleshooting here?


Is it the gluster traffic that's routed via gateway?

By moving VM, did you mean migrating VM from one host to another? In this
case, there's no storage migration. Why do you think this is a problem in
gluster settings?



>
>
>
> On 10/04/2016 10:38 AM, Hanson wrote:
>
>> Hi Guys,
>>
>> I've converted my lab from using 802.3ad with bonding>bridged vlans to
>> one link with two vlan bridges and am now having traffic jumping to the
>> gateway when moving VM's/ISO/etc.
>>
>> 802.3ad = node1>switch1>node2
>> 801.1q = node1>switch1>gateway>switch1>node2
>>
>> I assume I've setup the same vlan style, though this time I used the gui
>> on the initial host install... setting up the vlans with their parent being
>> eth0.
>>
>> Hosted-engine on deploy then creates ovirtmgmt on top of eth0.11 ...
>>
>> Switch is tagged for vlans 10 & 11. Including a PVID of 11 for good
>> measure. (Gluster is vlan 11)
>>
>> I'd expect the traffic from node to node to be going from port to port
>> like it did in 802.3ad, what have I done wrong or is it using the gui
>> initially?
>>
>> This is how the current setup looks:
>>
>> /var/lib/vdsm/Persistent/netconf/nets/ovirtmgmt:
>> {
>> "ipv6autoconf": false,
>> "nameservers": [],
>> "nic": "eth0",
>> "vlan": 11,
>> "ipaddr": "10.0.3.11",
>> "switch": "legacy",
>> "mtu": 1500,
>> "netmask": "255.255.255.0",
>> "dhcpv6": false,
>> "stp": false,
>> "bridged": true,
>> "gateway": "10.0.3.1",
>> "defaultRoute": true
>> }
>>
>> /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt:
>> # Generated by VDSM version 4.18.13-1.el7.centos
>> DEVICE=ovirtmgmt
>> TYPE=Bridge
>> DELAY=0
>> STP=off
>> ONBOOT=yes
>> IPADDR=10.0.3.11
>> NETMASK=255.255.255.0
>> GATEWAY=10.0.3.1
>> BOOTPROTO=none
>> DEFROUTE=yes
>> NM_CONTROLLED=no
>> IPV6INIT=no
>> VLAN_ID=11
>> MTU=1500
>>
>> Thanks!!
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>

--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se



--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KBGZ3VPGNRJZLXVZ3MIZR6JSZ2JT4XMK/


[ovirt-users] Re: hosted-engine and GlusterFS on Vlan help

2019-05-14 Thread Hanson
Running iperf3 between node1 & node2, I can achieve almost 10gbps 
without ever going out to the gateway...


So switching between port to port on the switch is working properly on 
the vlan.


This must be a problem in the gluster settings? Where do I start 
troubleshooting here?



On 10/04/2016 10:38 AM, Hanson wrote:

Hi Guys,

I've converted my lab from using 802.3ad with bonding>bridged vlans to 
one link with two vlan bridges and am now having traffic jumping to 
the gateway when moving VM's/ISO/etc.


802.3ad = node1>switch1>node2
801.1q = node1>switch1>gateway>switch1>node2

I assume I've setup the same vlan style, though this time I used the 
gui on the initial host install... setting up the vlans with their 
parent being eth0.


Hosted-engine on deploy then creates ovirtmgmt on top of eth0.11 ...

Switch is tagged for vlans 10 & 11. Including a PVID of 11 for good 
measure. (Gluster is vlan 11)


I'd expect the traffic from node to node to be going from port to port 
like it did in 802.3ad, what have I done wrong or is it using the gui 
initially?


This is how the current setup looks:

/var/lib/vdsm/Persistent/netconf/nets/ovirtmgmt:
{
"ipv6autoconf": false,
"nameservers": [],
"nic": "eth0",
"vlan": 11,
"ipaddr": "10.0.3.11",
"switch": "legacy",
"mtu": 1500,
"netmask": "255.255.255.0",
"dhcpv6": false,
"stp": false,
"bridged": true,
"gateway": "10.0.3.1",
"defaultRoute": true
}

/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt:
# Generated by VDSM version 4.18.13-1.el7.centos
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
IPADDR=10.0.3.11
NETMASK=255.255.255.0
GATEWAY=10.0.3.1
BOOTPROTO=none
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=no
VLAN_ID=11
MTU=1500

Thanks!!

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se



--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HKKWE4RKO5J7RJTLKYRKPFZKKACSA55I/