[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
I was hoping someone would know how to because I don't know python On Wed, Mar 20, 2019, 12:52 AM Strahil wrote: > Can't you make the script check if it windows or Linux and skip if it's > Linux? > > Best Regards, > Strahil Nikolov > On Mar 19, 2019 23:02, Darin Schmidt wrote: > > You also need to have this code hooked in: > cd /usr/libexec/vdsm/hooks/before_vm_start/ > vi 99_mask_kvm > > #!/usr/bin/python2 > > import hooking > domxml = hooking.read_domxml() > > hyperv = domxml.getElementsByTagName('hyperv')[0] > smm = domxml.createElement('vendor_id') > smm.setAttribute('state', 'on') > smm.setAttribute('value', '1234567890ab') > hyperv.appendChild(smm) > > features = domxml.getElementsByTagName('features')[0] > kvm = domxml.createElement('kvm') > hidden = domxml.createElement('hidden') > hidden.setAttribute('state', 'on') > kvm.appendChild(hidden) > features.appendChild(kvm) > > hooking.write_domxml(domxml) > > > only problem now is that I cant boot a linux VM with the vendor_is portion > there.. > > On Mon, Mar 18, 2019 at 3:30 PM Darin Schmidt > wrote: > > Seems that the system has to be running with bios Q35 UEFI. Standard bios > does not work. System is operational now. > > On Mon, Mar 18, 2019, 6:30 AM Darin Schmidt > wrote: > > Still no luck getting the gtx 1080 to enable inside the VM. I see the code > is being generated in the xml with the hook. But I still get error code 43. > Someone mentioned doing it with eufi bios and that worked for them. So when > I get back from work today, perhaps ill give that a try. > > On Mon, Mar 18, 2019, 6:10 AM Darin Schmidt > wrote: > > I have gotten the system to see the card, its in device manager. The > problem seems to be that I cannot use it in the VM because from what I have > been finding out is that it gets and error code 43. Nvidia drivers disable > the card if it detects that its being used in a VM. I have found some code > to use to hook it into the xml before_vm_starts. > > 99_mask_kvm > #!/usr/bin/python2 > > import hooking > domxml = hooking.read_domxml() > > hyperv = domxml.getElementsByTagName('hyperv')[0] > smm = domxml.createElement('vendor_id') > smm.setAttribute('state', 'on') > smm.setAttribute('value', '1234567890ab') > hyperv.appendChild(smm) > > features = domxml.getElementsByTagName('features')[0] > kvm = domxml.createElement('kvm') > hidden = domxml.createElement('hidden') > hidden.setAttribute('state', 'on') > kvm.appendChild(hidden) > features.appendChild(kvm) > > hooking.write_domxml(domxml) > > > I am currently reinstalling the drivers to see if this helps. > > kvm off and vender_id is now in the xml code that get generated when the > VM is started. Im going off of examples Im finding online. Perhaps I just > need to add the 10de to it instead of some generic # others are using. > > On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo wrote: > > Hi > > Vendor ID of Nvidia is usually 10de. > You can locate 'vendor ID: > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MHVEAMILIV66X3ORCO3G5OOZ5XZFZVG3/
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
Can't you make the script check if it windows or Linux and skip if it's Linux? Best Regards, Strahil NikolovOn Mar 19, 2019 23:02, Darin Schmidt wrote: > > You also need to have this code hooked in: > cd /usr/libexec/vdsm/hooks/before_vm_start/ > vi 99_mask_kvm > > #!/usr/bin/python2 > > import hooking > domxml = hooking.read_domxml() > > hyperv = domxml.getElementsByTagName('hyperv')[0] > smm = domxml.createElement('vendor_id') > smm.setAttribute('state', 'on') > smm.setAttribute('value', '1234567890ab') > hyperv.appendChild(smm) > > features = domxml.getElementsByTagName('features')[0] > kvm = domxml.createElement('kvm') > hidden = domxml.createElement('hidden') > hidden.setAttribute('state', 'on') > kvm.appendChild(hidden) > features.appendChild(kvm) > > hooking.write_domxml(domxml) > > > only problem now is that I cant boot a linux VM with the vendor_is portion > there.. > > On Mon, Mar 18, 2019 at 3:30 PM Darin Schmidt wrote: >> >> Seems that the system has to be running with bios Q35 UEFI. Standard bios >> does not work. System is operational now. >> >> On Mon, Mar 18, 2019, 6:30 AM Darin Schmidt wrote: >>> >>> Still no luck getting the gtx 1080 to enable inside the VM. I see the code >>> is being generated in the xml with the hook. But I still get error code 43. >>> Someone mentioned doing it with eufi bios and that worked for them. So when >>> I get back from work today, perhaps ill give that a try. >>> >>> On Mon, Mar 18, 2019, 6:10 AM Darin Schmidt wrote: I have gotten the system to see the card, its in device manager. The problem seems to be that I cannot use it in the VM because from what I have been finding out is that it gets and error code 43. Nvidia drivers disable the card if it detects that its being used in a VM. I have found some code to use to hook it into the xml before_vm_starts. 99_mask_kvm #!/usr/bin/python2 import hooking domxml = hooking.read_domxml() hyperv = domxml.getElementsByTagName('hyperv')[0] smm = domxml.createElement('vendor_id') smm.setAttribute('state', 'on') smm.setAttribute('value', '1234567890ab') hyperv.appendChild(smm) features = domxml.getElementsByTagName('features')[0] kvm = domxml.createElement('kvm') hidden = domxml.createElement('hidden') hidden.setAttribute('state', 'on') kvm.appendChild(hidden) features.appendChild(kvm) hooking.write_domxml(domxml) I am currently reinstalling the drivers to see if this helps. kvm off and vender_id is now in the xml code that get generated when the VM is started. Im going off of examples Im finding online. Perhaps I just need to add the 10de to it instead of some generic # others are using. On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo wrote: > > Hi > > Vendor ID of Nvidia is usually 10de. > You can locate 'vendor ID:___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH27ZEYJHUE5XQ72FPE26YLOQBNHIXW4/
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
You also need to have this code hooked in: cd /usr/libexec/vdsm/hooks/before_vm_start/ vi 99_mask_kvm #!/usr/bin/python2 import hooking domxml = hooking.read_domxml() hyperv = domxml.getElementsByTagName('hyperv')[0] smm = domxml.createElement('vendor_id') smm.setAttribute('state', 'on') smm.setAttribute('value', '1234567890ab') hyperv.appendChild(smm) features = domxml.getElementsByTagName('features')[0] kvm = domxml.createElement('kvm') hidden = domxml.createElement('hidden') hidden.setAttribute('state', 'on') kvm.appendChild(hidden) features.appendChild(kvm) hooking.write_domxml(domxml) only problem now is that I cant boot a linux VM with the vendor_is portion there.. On Mon, Mar 18, 2019 at 3:30 PM Darin Schmidt wrote: > Seems that the system has to be running with bios Q35 UEFI. Standard bios > does not work. System is operational now. > > On Mon, Mar 18, 2019, 6:30 AM Darin Schmidt > wrote: > >> Still no luck getting the gtx 1080 to enable inside the VM. I see the >> code is being generated in the xml with the hook. But I still get error >> code 43. Someone mentioned doing it with eufi bios and that worked for >> them. So when I get back from work today, perhaps ill give that a try. >> >> On Mon, Mar 18, 2019, 6:10 AM Darin Schmidt >> wrote: >> >>> I have gotten the system to see the card, its in device manager. The >>> problem seems to be that I cannot use it in the VM because from what I have >>> been finding out is that it gets and error code 43. Nvidia drivers disable >>> the card if it detects that its being used in a VM. I have found some code >>> to use to hook it into the xml before_vm_starts. >>> >>> 99_mask_kvm >>> #!/usr/bin/python2 >>> >>> import hooking >>> domxml = hooking.read_domxml() >>> >>> hyperv = domxml.getElementsByTagName('hyperv')[0] >>> smm = domxml.createElement('vendor_id') >>> smm.setAttribute('state', 'on') >>> smm.setAttribute('value', '1234567890ab') >>> hyperv.appendChild(smm) >>> >>> features = domxml.getElementsByTagName('features')[0] >>> kvm = domxml.createElement('kvm') >>> hidden = domxml.createElement('hidden') >>> hidden.setAttribute('state', 'on') >>> kvm.appendChild(hidden) >>> features.appendChild(kvm) >>> >>> hooking.write_domxml(domxml) >>> >>> >>> I am currently reinstalling the drivers to see if this helps. >>> >>> kvm off and vender_id is now in the xml code that get generated when the >>> VM is started. Im going off of examples Im finding online. Perhaps I just >>> need to add the 10de to it instead of some generic # others are using. >>> >>> On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo >>> wrote: >>> Hi Vendor ID of Nvidia is usually 10de. You can locate 'vendor ID:product ID' by running lspci command, for example: [root@intel-vfio ~]# lspci -Dnn | grep -i nvidia :03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL [Quadro K4200] [10de:11b4] (rev a1) :03:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio Controller [10de:0e0a] (rev a1) [root@intel-vfio ~]# In this example, the vendor ID of VGA controller is 10de and the product ID is 11b4 Please bare in mind that you need to enable IOMMU, add pci-stub (prevent the host driver for using GPU device) and disable the default nouveau driver on the host Kernel command line. to do that: 1. Edit host /etc/sysconfig/grub and add the next to GRUB_CMDLINE_LINUX: - intel_iommu=on or amd_iommu=on - pci-stub.ids=10de:11b4,10de:0e0a - rdblacklist=nouveau 2. Regenerate the boot loader configuration using grub2-mkconfig command: # grub2-mkconfig -o /etc/grub2.cfg 3. Reboot the host. 4. Verify configuration: [root@intel-vfio ~]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.10.0-957.5.1.el7.x86_64 root=/dev/mapper/vg0-lv_root ro crashkernel=auto rd.lvm.lv=vg0/lv_root rd.lvm.lv=vg0/lv_swap rhgb quiet pci-stub.ids=10de:11b4,10de:0e0a intel_iommu=on rdblacklist=nouveau LANG=en_US.UTF-8 [root@intel-vfio ~]# After running this, you should be able to passthrough GPU to VM. BTW, why are you using engine-config and not doing it from oVirt UI or using virsh edit command? Thanks On Mon, Mar 18, 2019 at 1:52 AM Darin Schmidt wrote: > Hello all, im trying to figure out how to configure the custom > properties to enable my NVIDIA card to work in the VM. Its my > understanding > that the drives dont work because it detects its in a VM.. > > Im trying to do something like this: > > engine-config -s > UserDefinedVMProperties="kvmhidden=^(true|false)$;{type=vendor_id;state={^(on|off)$;value=^([0-9])$}}" > > > But thats clearly not working. If I do this: > > engine-config -s > UserDefinedVMProperties="kvmhidden=^(true|false)$;vendor_id={state=^(on|off)$;value=^([0-9])$}"
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
Seems that the system has to be running with bios Q35 UEFI. Standard bios does not work. System is operational now. On Mon, Mar 18, 2019, 6:30 AM Darin Schmidt wrote: > Still no luck getting the gtx 1080 to enable inside the VM. I see the code > is being generated in the xml with the hook. But I still get error code 43. > Someone mentioned doing it with eufi bios and that worked for them. So when > I get back from work today, perhaps ill give that a try. > > On Mon, Mar 18, 2019, 6:10 AM Darin Schmidt > wrote: > >> I have gotten the system to see the card, its in device manager. The >> problem seems to be that I cannot use it in the VM because from what I have >> been finding out is that it gets and error code 43. Nvidia drivers disable >> the card if it detects that its being used in a VM. I have found some code >> to use to hook it into the xml before_vm_starts. >> >> 99_mask_kvm >> #!/usr/bin/python2 >> >> import hooking >> domxml = hooking.read_domxml() >> >> hyperv = domxml.getElementsByTagName('hyperv')[0] >> smm = domxml.createElement('vendor_id') >> smm.setAttribute('state', 'on') >> smm.setAttribute('value', '1234567890ab') >> hyperv.appendChild(smm) >> >> features = domxml.getElementsByTagName('features')[0] >> kvm = domxml.createElement('kvm') >> hidden = domxml.createElement('hidden') >> hidden.setAttribute('state', 'on') >> kvm.appendChild(hidden) >> features.appendChild(kvm) >> >> hooking.write_domxml(domxml) >> >> >> I am currently reinstalling the drivers to see if this helps. >> >> kvm off and vender_id is now in the xml code that get generated when the >> VM is started. Im going off of examples Im finding online. Perhaps I just >> need to add the 10de to it instead of some generic # others are using. >> >> On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo >> wrote: >> >>> Hi >>> >>> Vendor ID of Nvidia is usually 10de. >>> You can locate 'vendor ID:product ID' by running lspci command, for >>> example: >>> [root@intel-vfio ~]# lspci -Dnn | grep -i nvidia >>> :03:00.0 VGA compatible controller [0300]: NVIDIA Corporation >>> GK104GL [Quadro K4200] [10de:11b4] (rev a1) >>> :03:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio >>> Controller [10de:0e0a] (rev a1) >>> [root@intel-vfio ~]# >>> >>> In this example, the vendor ID of VGA controller is 10de and the product >>> ID is 11b4 >>> >>> Please bare in mind that you need to enable IOMMU, add pci-stub (prevent >>> the host driver for using GPU device) and disable the default nouveau >>> driver on the host Kernel command line. >>> to do that: >>> 1. Edit host /etc/sysconfig/grub and add the next to GRUB_CMDLINE_LINUX: >>> >>>- intel_iommu=on or amd_iommu=on >>>- pci-stub.ids=10de:11b4,10de:0e0a >>>- rdblacklist=nouveau >>> >>> 2. Regenerate the boot loader configuration using grub2-mkconfig command: >>> # grub2-mkconfig -o /etc/grub2.cfg >>> 3. Reboot the host. >>> 4. Verify configuration: >>> [root@intel-vfio ~]# cat /proc/cmdline >>> BOOT_IMAGE=/vmlinuz-3.10.0-957.5.1.el7.x86_64 >>> root=/dev/mapper/vg0-lv_root ro crashkernel=auto rd.lvm.lv=vg0/lv_root >>> rd.lvm.lv=vg0/lv_swap rhgb quiet pci-stub.ids=10de:11b4,10de:0e0a >>> intel_iommu=on rdblacklist=nouveau LANG=en_US.UTF-8 >>> [root@intel-vfio ~]# >>> >>> >>> After running this, you should be able to passthrough GPU to VM. >>> >>> BTW, why are you using engine-config and not doing it from oVirt UI or >>> using virsh edit command? >>> >>> Thanks >>> >>> >>> On Mon, Mar 18, 2019 at 1:52 AM Darin Schmidt >>> wrote: >>> Hello all, im trying to figure out how to configure the custom properties to enable my NVIDIA card to work in the VM. Its my understanding that the drives dont work because it detects its in a VM.. Im trying to do something like this: engine-config -s UserDefinedVMProperties="kvmhidden=^(true|false)$;{type=vendor_id;state={^(on|off)$;value=^([0-9])$}}" But thats clearly not working. If I do this: engine-config -s UserDefinedVMProperties="kvmhidden=^(true|false)$;vendor_id={state=^(on|off)$;value=^([0-9])$}" It works but, the options are messed up. Im not sure how to find out the correct syntax to get this to work. Would appreciate any advice. >>> >>> >>> -- >>> Nisim Simsolo >>> QE -Testing Engineer >>> IRC: nsimsolo >>> int phone - 8272305 >>> mobile - 054-4779934 >>> >> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4UBAZ6DATBEYEISWT2N3LKXWESWA77NH/
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
Still no luck getting the gtx 1080 to enable inside the VM. I see the code is being generated in the xml with the hook. But I still get error code 43. Someone mentioned doing it with eufi bios and that worked for them. So when I get back from work today, perhaps ill give that a try. On Mon, Mar 18, 2019, 6:10 AM Darin Schmidt wrote: > I have gotten the system to see the card, its in device manager. The > problem seems to be that I cannot use it in the VM because from what I have > been finding out is that it gets and error code 43. Nvidia drivers disable > the card if it detects that its being used in a VM. I have found some code > to use to hook it into the xml before_vm_starts. > > 99_mask_kvm > #!/usr/bin/python2 > > import hooking > domxml = hooking.read_domxml() > > hyperv = domxml.getElementsByTagName('hyperv')[0] > smm = domxml.createElement('vendor_id') > smm.setAttribute('state', 'on') > smm.setAttribute('value', '1234567890ab') > hyperv.appendChild(smm) > > features = domxml.getElementsByTagName('features')[0] > kvm = domxml.createElement('kvm') > hidden = domxml.createElement('hidden') > hidden.setAttribute('state', 'on') > kvm.appendChild(hidden) > features.appendChild(kvm) > > hooking.write_domxml(domxml) > > > I am currently reinstalling the drivers to see if this helps. > > kvm off and vender_id is now in the xml code that get generated when the > VM is started. Im going off of examples Im finding online. Perhaps I just > need to add the 10de to it instead of some generic # others are using. > > On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo wrote: > >> Hi >> >> Vendor ID of Nvidia is usually 10de. >> You can locate 'vendor ID:product ID' by running lspci command, for >> example: >> [root@intel-vfio ~]# lspci -Dnn | grep -i nvidia >> :03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL >> [Quadro K4200] [10de:11b4] (rev a1) >> :03:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio >> Controller [10de:0e0a] (rev a1) >> [root@intel-vfio ~]# >> >> In this example, the vendor ID of VGA controller is 10de and the product >> ID is 11b4 >> >> Please bare in mind that you need to enable IOMMU, add pci-stub (prevent >> the host driver for using GPU device) and disable the default nouveau >> driver on the host Kernel command line. >> to do that: >> 1. Edit host /etc/sysconfig/grub and add the next to GRUB_CMDLINE_LINUX: >> >>- intel_iommu=on or amd_iommu=on >>- pci-stub.ids=10de:11b4,10de:0e0a >>- rdblacklist=nouveau >> >> 2. Regenerate the boot loader configuration using grub2-mkconfig command: >> # grub2-mkconfig -o /etc/grub2.cfg >> 3. Reboot the host. >> 4. Verify configuration: >> [root@intel-vfio ~]# cat /proc/cmdline >> BOOT_IMAGE=/vmlinuz-3.10.0-957.5.1.el7.x86_64 >> root=/dev/mapper/vg0-lv_root ro crashkernel=auto rd.lvm.lv=vg0/lv_root >> rd.lvm.lv=vg0/lv_swap rhgb quiet pci-stub.ids=10de:11b4,10de:0e0a >> intel_iommu=on rdblacklist=nouveau LANG=en_US.UTF-8 >> [root@intel-vfio ~]# >> >> >> After running this, you should be able to passthrough GPU to VM. >> >> BTW, why are you using engine-config and not doing it from oVirt UI or >> using virsh edit command? >> >> Thanks >> >> >> On Mon, Mar 18, 2019 at 1:52 AM Darin Schmidt >> wrote: >> >>> Hello all, im trying to figure out how to configure the custom >>> properties to enable my NVIDIA card to work in the VM. Its my understanding >>> that the drives dont work because it detects its in a VM.. >>> >>> Im trying to do something like this: >>> >>> engine-config -s >>> UserDefinedVMProperties="kvmhidden=^(true|false)$;{type=vendor_id;state={^(on|off)$;value=^([0-9])$}}" >>> >>> >>> But thats clearly not working. If I do this: >>> >>> engine-config -s >>> UserDefinedVMProperties="kvmhidden=^(true|false)$;vendor_id={state=^(on|off)$;value=^([0-9])$}" >>> >>> >>> It works but, the options are messed up. Im not sure how to find out the >>> correct syntax to get this to work. Would appreciate any advice. >>> >> >> >> -- >> Nisim Simsolo >> QE -Testing Engineer >> IRC: nsimsolo >> int phone - 8272305 >> mobile - 054-4779934 >> > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F4RSJDPHOTCC7HW2BCNKAEMILB65W6DZ/
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
I have gotten the system to see the card, its in device manager. The problem seems to be that I cannot use it in the VM because from what I have been finding out is that it gets and error code 43. Nvidia drivers disable the card if it detects that its being used in a VM. I have found some code to use to hook it into the xml before_vm_starts. 99_mask_kvm #!/usr/bin/python2 import hooking domxml = hooking.read_domxml() hyperv = domxml.getElementsByTagName('hyperv')[0] smm = domxml.createElement('vendor_id') smm.setAttribute('state', 'on') smm.setAttribute('value', '1234567890ab') hyperv.appendChild(smm) features = domxml.getElementsByTagName('features')[0] kvm = domxml.createElement('kvm') hidden = domxml.createElement('hidden') hidden.setAttribute('state', 'on') kvm.appendChild(hidden) features.appendChild(kvm) hooking.write_domxml(domxml) I am currently reinstalling the drivers to see if this helps. kvm off and vender_id is now in the xml code that get generated when the VM is started. Im going off of examples Im finding online. Perhaps I just need to add the 10de to it instead of some generic # others are using. On Mon, Mar 18, 2019 at 6:02 AM Nisim Simsolo wrote: > Hi > > Vendor ID of Nvidia is usually 10de. > You can locate 'vendor ID:product ID' by running lspci command, for > example: > [root@intel-vfio ~]# lspci -Dnn | grep -i nvidia > :03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL > [Quadro K4200] [10de:11b4] (rev a1) > :03:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio > Controller [10de:0e0a] (rev a1) > [root@intel-vfio ~]# > > In this example, the vendor ID of VGA controller is 10de and the product > ID is 11b4 > > Please bare in mind that you need to enable IOMMU, add pci-stub (prevent > the host driver for using GPU device) and disable the default nouveau > driver on the host Kernel command line. > to do that: > 1. Edit host /etc/sysconfig/grub and add the next to GRUB_CMDLINE_LINUX: > >- intel_iommu=on or amd_iommu=on >- pci-stub.ids=10de:11b4,10de:0e0a >- rdblacklist=nouveau > > 2. Regenerate the boot loader configuration using grub2-mkconfig command: > # grub2-mkconfig -o /etc/grub2.cfg > 3. Reboot the host. > 4. Verify configuration: > [root@intel-vfio ~]# cat /proc/cmdline > BOOT_IMAGE=/vmlinuz-3.10.0-957.5.1.el7.x86_64 root=/dev/mapper/vg0-lv_root > ro crashkernel=auto rd.lvm.lv=vg0/lv_root rd.lvm.lv=vg0/lv_swap rhgb > quiet pci-stub.ids=10de:11b4,10de:0e0a intel_iommu=on rdblacklist=nouveau > LANG=en_US.UTF-8 > [root@intel-vfio ~]# > > > After running this, you should be able to passthrough GPU to VM. > > BTW, why are you using engine-config and not doing it from oVirt UI or > using virsh edit command? > > Thanks > > > On Mon, Mar 18, 2019 at 1:52 AM Darin Schmidt > wrote: > >> Hello all, im trying to figure out how to configure the custom properties >> to enable my NVIDIA card to work in the VM. Its my understanding that the >> drives dont work because it detects its in a VM.. >> >> Im trying to do something like this: >> >> engine-config -s >> UserDefinedVMProperties="kvmhidden=^(true|false)$;{type=vendor_id;state={^(on|off)$;value=^([0-9])$}}" >> >> >> But thats clearly not working. If I do this: >> >> engine-config -s >> UserDefinedVMProperties="kvmhidden=^(true|false)$;vendor_id={state=^(on|off)$;value=^([0-9])$}" >> >> >> It works but, the options are messed up. Im not sure how to find out the >> correct syntax to get this to work. Would appreciate any advice. >> > > > -- > Nisim Simsolo > QE -Testing Engineer > IRC: nsimsolo > int phone - 8272305 > mobile - 054-4779934 > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BNUKZSPXNJZSDKLX42EKTTPDOWRA362I/
[ovirt-users] Re: vender_id syntax UserDefinedVMProperties
Hi Vendor ID of Nvidia is usually 10de. You can locate 'vendor ID:product ID' by running lspci command, for example: [root@intel-vfio ~]# lspci -Dnn | grep -i nvidia :03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL [Quadro K4200] [10de:11b4] (rev a1) :03:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio Controller [10de:0e0a] (rev a1) [root@intel-vfio ~]# In this example, the vendor ID of VGA controller is 10de and the product ID is 11b4 Please bare in mind that you need to enable IOMMU, add pci-stub (prevent the host driver for using GPU device) and disable the default nouveau driver on the host Kernel command line. to do that: 1. Edit host /etc/sysconfig/grub and add the next to GRUB_CMDLINE_LINUX: - intel_iommu=on or amd_iommu=on - pci-stub.ids=10de:11b4,10de:0e0a - rdblacklist=nouveau 2. Regenerate the boot loader configuration using grub2-mkconfig command: # grub2-mkconfig -o /etc/grub2.cfg 3. Reboot the host. 4. Verify configuration: [root@intel-vfio ~]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.10.0-957.5.1.el7.x86_64 root=/dev/mapper/vg0-lv_root ro crashkernel=auto rd.lvm.lv=vg0/lv_root rd.lvm.lv=vg0/lv_swap rhgb quiet pci-stub.ids=10de:11b4,10de:0e0a intel_iommu=on rdblacklist=nouveau LANG=en_US.UTF-8 [root@intel-vfio ~]# After running this, you should be able to passthrough GPU to VM. BTW, why are you using engine-config and not doing it from oVirt UI or using virsh edit command? Thanks On Mon, Mar 18, 2019 at 1:52 AM Darin Schmidt wrote: > Hello all, im trying to figure out how to configure the custom properties > to enable my NVIDIA card to work in the VM. Its my understanding that the > drives dont work because it detects its in a VM.. > > Im trying to do something like this: > > engine-config -s > UserDefinedVMProperties="kvmhidden=^(true|false)$;{type=vendor_id;state={^(on|off)$;value=^([0-9])$}}" > > > But thats clearly not working. If I do this: > > engine-config -s > UserDefinedVMProperties="kvmhidden=^(true|false)$;vendor_id={state=^(on|off)$;value=^([0-9])$}" > > > It works but, the options are messed up. Im not sure how to find out the > correct syntax to get this to work. Would appreciate any advice. > -- Nisim Simsolo QE -Testing Engineer IRC: nsimsolo int phone - 8272305 mobile - 054-4779934 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3VN26COJRRIF7CGKY6DU5CURMQOK6X2Y/