Re: [ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
On Fri, Apr 15, 2016 at 2:33 PM, Paul Groeneweg | Pazion wrote:
> Thanks for the help!
>
> I managed to fix it :-)
>
> I made a device from the hosted engine file with losetup and for the LVM
> again.
> From there I was able to fsck my partition. And answered a lot of y to the
> list of inconsistences.
> I removed the loop back devices.
> I turned off maintenance mode and hosted engine started :-)
> Few hours later , restore of the pgsql db and scratching my head, very happy
> it is running again without any VMS being offline meanwhile :)
>
> I will defintely save the way to start hosted-engine with cd iso, as this
> seems less error sensitive and easier to do.
>
It was recently mentioned [1] here that in 3.6, you can't start the
vm when you are in maintenance. Was this changed? Adding also Martin.
[1] http://lists.ovirt.org/pipermail/users/2016-January/036993.html
Best,
>
>
> Thanks!
>
>
> Op vr 15 apr. 2016 om 11:35 schreef Simone Tiraboschi :
>>
>> On Fri, Apr 15, 2016 at 11:02 AM, Paul Groeneweg | Pazion
>> wrote:
>> > Thanks!
>> >
>> > I managed to get the console through:
>> >
>> > hosted-engine --add-console-password
>> > /bin/remote-viewer vnc://localhost:5900
>> >
>> > Turns out, there seems to be some corruption on the partition:
>> > http://screencast.com/t/6iR0U3QuI
>> >
>> > Is there a way to boot from CD, so I can start rescue mode?
>>
>> Yes,
>> you have to set global maintenance mode to avoid VM start attempts on
>> other hosts.
>>
>> You have to poweroff the engine VM with:
>> hosted-engine --vm-shutdown/--vm-poweroff (probably the second one in
>> your case)
>> Then you have to create a copy of
>> /var/run/ovirt-hosted-engine-ha/vm.conf and you have to manually edit
>> it in order to attach the ISO image and change the boot order.
>> At that point you can start the engine VM with your custom configuration
>> with:
>> hosted-engine --vm-start --vm-conf=my_custom_vm.conf
>>
>> Good luck!
>>
>> > Op vr 15 apr. 2016 om 10:58 schreef Martin Sivak :
>> >>
>> >> Hi,
>> >>
>> >> you can access the console using vnc or use virsh to get access to the
>> >> serial console.
>> >>
>> >> Check the following commands on the host where the VM is currently
>> >> running:
>> >>
>> >> virsh -r list
>> >> virsh -r console HostedEngine
>> >> virsh -r vncdisplay HostedEngine
>> >>
>> >> Those should give you enough pointers to connect to the VM.
>> >>
>> >> Regards
>> >>
>> >> Martin Sivak
>> >>
>> >>
>> >>
>> >> On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
>> >> wrote:
>> >> >
>> >> > Tonight my server with NFS hosted-engine mount crashed.
>> >> > Now all is back online ,except the hosted engine. I can't ping or
>> >> > ssh
>> >> > the
>> >> > machine
>> >> >
>> >> > when I do hosted-engine --vm-status, I get:
>> >> >
>> >> > ..
>> >> > --== Host 2 status ==--
>> >> >
>> >> > Status up-to-date : True
>> >> > Hostname : geisha-3.pazion.nl
>> >> > Host ID: 2
>> >> > Engine status : {"reason": "failed liveliness
>> >> > check",
>> >> > "health": "bad", "vm": "up", "detail": "up"}
>> >> > Score : 3400
>> >> > stopped: False
>> >> > Local maintenance : False
>> >> > crc32 : d71d7c6b
>> >> > Host timestamp : 4404
>> >> >
>> >> >
>> >> > I tried restarting all services/nfs mounts, start hosted engine on
>> >> > other
>> >> > hosts, but all the same host up, but liveliness failed and unable to
>> >> > access
>> >> > the network/IP.
>> >> >
>> >> > I imagine it is stuck at the console requiring a fsck check maybe?
>> >> > Is there a way to access the boot display directly?
>> >> >
>> >> > Any help is highly appreciated!
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > ___
>> >> > Users mailing list
>> >> > Users@ovirt.org
>> >> > http://lists.ovirt.org/mailman/listinfo/users
>> >> >
>> >
>> >
>> > ___
>> > Users mailing list
>> > Users@ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
Thanks for the help!
I managed to fix it :-)
I made a device from the hosted engine file with losetup and for the LVM
again.
>From there I was able to fsck my partition. And answered a lot of y to the
list of inconsistences.
I removed the loop back devices.
I turned off maintenance mode and hosted engine started :-)
Few hours later , restore of the pgsql db and scratching my head, very
happy it is running again without any VMS being offline meanwhile :)
I will defintely save the way to start hosted-engine with cd iso, as this
seems less error sensitive and easier to do.
Thanks!
Op vr 15 apr. 2016 om 11:35 schreef Simone Tiraboschi :
> On Fri, Apr 15, 2016 at 11:02 AM, Paul Groeneweg | Pazion
> wrote:
> > Thanks!
> >
> > I managed to get the console through:
> >
> > hosted-engine --add-console-password
> > /bin/remote-viewer vnc://localhost:5900
> >
> > Turns out, there seems to be some corruption on the partition:
> > http://screencast.com/t/6iR0U3QuI
> >
> > Is there a way to boot from CD, so I can start rescue mode?
>
> Yes,
> you have to set global maintenance mode to avoid VM start attempts on
> other hosts.
>
> You have to poweroff the engine VM with:
> hosted-engine --vm-shutdown/--vm-poweroff (probably the second one in
> your case)
> Then you have to create a copy of
> /var/run/ovirt-hosted-engine-ha/vm.conf and you have to manually edit
> it in order to attach the ISO image and change the boot order.
> At that point you can start the engine VM with your custom configuration
> with:
> hosted-engine --vm-start --vm-conf=my_custom_vm.conf
>
> Good luck!
>
> > Op vr 15 apr. 2016 om 10:58 schreef Martin Sivak :
> >>
> >> Hi,
> >>
> >> you can access the console using vnc or use virsh to get access to the
> >> serial console.
> >>
> >> Check the following commands on the host where the VM is currently
> >> running:
> >>
> >> virsh -r list
> >> virsh -r console HostedEngine
> >> virsh -r vncdisplay HostedEngine
> >>
> >> Those should give you enough pointers to connect to the VM.
> >>
> >> Regards
> >>
> >> Martin Sivak
> >>
> >>
> >>
> >> On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
> >> wrote:
> >> >
> >> > Tonight my server with NFS hosted-engine mount crashed.
> >> > Now all is back online ,except the hosted engine. I can't ping or ssh
> >> > the
> >> > machine
> >> >
> >> > when I do hosted-engine --vm-status, I get:
> >> >
> >> > ..
> >> > --== Host 2 status ==--
> >> >
> >> > Status up-to-date : True
> >> > Hostname : geisha-3.pazion.nl
> >> > Host ID: 2
> >> > Engine status : {"reason": "failed liveliness
> >> > check",
> >> > "health": "bad", "vm": "up", "detail": "up"}
> >> > Score : 3400
> >> > stopped: False
> >> > Local maintenance : False
> >> > crc32 : d71d7c6b
> >> > Host timestamp : 4404
> >> >
> >> >
> >> > I tried restarting all services/nfs mounts, start hosted engine on
> other
> >> > hosts, but all the same host up, but liveliness failed and unable to
> >> > access
> >> > the network/IP.
> >> >
> >> > I imagine it is stuck at the console requiring a fsck check maybe?
> >> > Is there a way to access the boot display directly?
> >> >
> >> > Any help is highly appreciated!
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > ___
> >> > Users mailing list
> >> > Users@ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/users
> >> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
On Fri, Apr 15, 2016 at 11:02 AM, Paul Groeneweg | Pazion
wrote:
> Thanks!
>
> I managed to get the console through:
>
> hosted-engine --add-console-password
> /bin/remote-viewer vnc://localhost:5900
>
> Turns out, there seems to be some corruption on the partition:
> http://screencast.com/t/6iR0U3QuI
>
> Is there a way to boot from CD, so I can start rescue mode?
Yes,
you have to set global maintenance mode to avoid VM start attempts on
other hosts.
You have to poweroff the engine VM with:
hosted-engine --vm-shutdown/--vm-poweroff (probably the second one in
your case)
Then you have to create a copy of
/var/run/ovirt-hosted-engine-ha/vm.conf and you have to manually edit
it in order to attach the ISO image and change the boot order.
At that point you can start the engine VM with your custom configuration with:
hosted-engine --vm-start --vm-conf=my_custom_vm.conf
Good luck!
> Op vr 15 apr. 2016 om 10:58 schreef Martin Sivak :
>>
>> Hi,
>>
>> you can access the console using vnc or use virsh to get access to the
>> serial console.
>>
>> Check the following commands on the host where the VM is currently
>> running:
>>
>> virsh -r list
>> virsh -r console HostedEngine
>> virsh -r vncdisplay HostedEngine
>>
>> Those should give you enough pointers to connect to the VM.
>>
>> Regards
>>
>> Martin Sivak
>>
>>
>>
>> On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
>> wrote:
>> >
>> > Tonight my server with NFS hosted-engine mount crashed.
>> > Now all is back online ,except the hosted engine. I can't ping or ssh
>> > the
>> > machine
>> >
>> > when I do hosted-engine --vm-status, I get:
>> >
>> > ..
>> > --== Host 2 status ==--
>> >
>> > Status up-to-date : True
>> > Hostname : geisha-3.pazion.nl
>> > Host ID: 2
>> > Engine status : {"reason": "failed liveliness
>> > check",
>> > "health": "bad", "vm": "up", "detail": "up"}
>> > Score : 3400
>> > stopped: False
>> > Local maintenance : False
>> > crc32 : d71d7c6b
>> > Host timestamp : 4404
>> >
>> >
>> > I tried restarting all services/nfs mounts, start hosted engine on other
>> > hosts, but all the same host up, but liveliness failed and unable to
>> > access
>> > the network/IP.
>> >
>> > I imagine it is stuck at the console requiring a fsck check maybe?
>> > Is there a way to access the boot display directly?
>> >
>> > Any help is highly appreciated!
>> >
>> >
>> >
>> >
>> >
>> >
>> > ___
>> > Users mailing list
>> > Users@ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
Thanks!
I managed to get the console through:
hosted-engine --add-console-password
/bin/remote-viewer vnc://localhost:5900
Turns out, there seems to be some corruption on the partition:
http://screencast.com/t/6iR0U3QuI
Is there a way to boot from CD, so I can start rescue mode?
Op vr 15 apr. 2016 om 10:58 schreef Martin Sivak :
> Hi,
>
> you can access the console using vnc or use virsh to get access to the
> serial console.
>
> Check the following commands on the host where the VM is currently running:
>
> virsh -r list
> virsh -r console HostedEngine
> virsh -r vncdisplay HostedEngine
>
> Those should give you enough pointers to connect to the VM.
>
> Regards
>
> Martin Sivak
>
>
>
> On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
> wrote:
> >
> > Tonight my server with NFS hosted-engine mount crashed.
> > Now all is back online ,except the hosted engine. I can't ping or ssh
> the
> > machine
> >
> > when I do hosted-engine --vm-status, I get:
> >
> > ..
> > --== Host 2 status ==--
> >
> > Status up-to-date : True
> > Hostname : geisha-3.pazion.nl
> > Host ID: 2
> > Engine status : {"reason": "failed liveliness
> check",
> > "health": "bad", "vm": "up", "detail": "up"}
> > Score : 3400
> > stopped: False
> > Local maintenance : False
> > crc32 : d71d7c6b
> > Host timestamp : 4404
> >
> >
> > I tried restarting all services/nfs mounts, start hosted engine on other
> > hosts, but all the same host up, but liveliness failed and unable to
> access
> > the network/IP.
> >
> > I imagine it is stuck at the console requiring a fsck check maybe?
> > Is there a way to access the boot display directly?
> >
> > Any help is highly appreciated!
> >
> >
> >
> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
Hi,
you can access the console using vnc or use virsh to get access to the
serial console.
Check the following commands on the host where the VM is currently running:
virsh -r list
virsh -r console HostedEngine
virsh -r vncdisplay HostedEngine
Those should give you enough pointers to connect to the VM.
Regards
Martin Sivak
On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
wrote:
>
> Tonight my server with NFS hosted-engine mount crashed.
> Now all is back online ,except the hosted engine. I can't ping or ssh the
> machine
>
> when I do hosted-engine --vm-status, I get:
>
> ..
> --== Host 2 status ==--
>
> Status up-to-date : True
> Hostname : geisha-3.pazion.nl
> Host ID: 2
> Engine status : {"reason": "failed liveliness check",
> "health": "bad", "vm": "up", "detail": "up"}
> Score : 3400
> stopped: False
> Local maintenance : False
> crc32 : d71d7c6b
> Host timestamp : 4404
>
>
> I tried restarting all services/nfs mounts, start hosted engine on other
> hosts, but all the same host up, but liveliness failed and unable to access
> the network/IP.
>
> I imagine it is stuck at the console requiring a fsck check maybe?
> Is there a way to access the boot display directly?
>
> Any help is highly appreciated!
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
Tonight my server with NFS hosted-engine mount crashed.
Now all is back online ,except the hosted engine. I can't ping or ssh the
machine
when I do hosted-engine --vm-status, I get:
..
--== Host 2 status ==--
Status up-to-date : True
Hostname : geisha-3.pazion.nl
Host ID: 2
Engine status : {"reason": "failed liveliness check",
"health": "bad", "vm": "up", "detail": "up"}
Score : 3400
stopped: False
Local maintenance : False
crc32 : d71d7c6b
Host timestamp : 4404
I tried restarting all services/nfs mounts, start hosted engine on other
hosts, but all the same host up, but liveliness failed and unable to access
the network/IP.
I imagine it is stuck at the console requiring a fsck check maybe?
Is there a way to access the boot display directly?
Any help is highly appreciated!
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
