On Thu, Dec 7, 2017 at 1:22 AM Gianluca Cecchi
wrote:
> On Wed, Dec 6, 2017 at 11:42 PM, Nir Soffer wrote:
>
>>
>>
>>>
>>> BTW: I notice that the disk seems preallocated even if original qcow2 is
>>> thin... is this expected?
>>> This obviously
On Wed, Dec 6, 2017 at 11:42 PM, Nir Soffer wrote:
>
>
>>
>> BTW: I notice that the disk seems preallocated even if original qcow2 is
>> thin... is this expected?
>> This obviously also impacts the time to upload (20Gb virtual disk with
>> actual 1.2Gb occupied needs the time
On Thu, Dec 7, 2017 at 12:33 AM Gianluca Cecchi
wrote:
> On Wed, Dec 6, 2017 at 5:23 PM, Paolo Margara
> wrote:
>
>> I think that it could be useful.
>>
>>
>> Greetings,
>>
>> Paolo
>>
>
> +1
>
> BTW: I notice that the disk seems
On Wed, Dec 6, 2017 at 5:23 PM, Paolo Margara
wrote:
> I think that it could be useful.
>
>
> Greetings,
>
> Paolo
>
+1
BTW: I notice that the disk seems preallocated even if original qcow2 is
thin... is this expected?
This obviously also impacts the time to upload
I think that it could be useful.
Greetings,
Paolo
Il 06/12/2017 13:22, Nir Soffer ha scritto:
> Thanks for sharing the solutions.
>
> Maybe we need to mention this in the documentation?
>
> On Wed, Dec 6, 2017 at 1:27 PM Gianluca Cecchi
>
Thanks for sharing the solutions.
Maybe we need to mention this in the documentation?
On Wed, Dec 6, 2017 at 1:27 PM Gianluca Cecchi
wrote:
> On Wed, Dec 6, 2017 at 9:03 AM, Paolo Margara
> wrote:
>
>> Hi Gianluca,
>>
>> if you execute
On Wed, Dec 6, 2017 at 9:03 AM, Paolo Margara
wrote:
> Hi Gianluca,
>
> if you execute "engine-config --get ImageProxyAddress" the value of that
> attribute is your engine's fqdn?
>
> I had a similar issue in the past with my setup and in my case the problem
> was the
Hi Gianluca,
if you execute "engine-config --get ImageProxyAddress" the value of that
attribute is your engine's fqdn?
I had a similar issue in the past with my setup and in my case the
problem was the wrong value of the attribute ImageProxyAddress, I hope
this could be useful also for you.
On Tue, Dec 5, 2017 at 10:22 PM, Gianluca Cecchi
wrote:
> Hello,
> I'm on oVirt 4.1.7, the latest in 4.1 right now.
> Initially in engine-setup when prompted I set Image I/O Proxy to false.
>
> Configure Image I/O Proxy : False
>
> Now instead I
Hello,
I'm on oVirt 4.1.7, the latest in 4.1 right now.
Initially in engine-setup when prompted I set Image I/O Proxy to false.
Configure Image I/O Proxy : False
Now instead I would like to enable it, but if I run engine-setup I can't
find a way to do it. I can only
10 matches
Mail list logo