Re: [ovirt-users] howto change hosted-engine config memory

2016-02-04 Thread Paul Groeneweg | Pazion
Hi Simone,


Op do 4 feb. 2016 om 09:26 schreef Simone Tiraboschi :

> On Thu, Feb 4, 2016 at 9:11 AM, Paul Groeneweg | Pazion 
> wrote:
>
>> What can I expect? webinterface of 3.5 Hosts will remain broken?
>>
>
> Just to clarify,
> Paul, feel free to correct me, the engine is already at 3.6, the hosts are
> still at 3.5 so the cluster compatibility level is still at 3.5 and so no
> auto-import. In order to gain auto-import and other 3.6 feature you need to
> upgrade all of you hosts to 3.6 (and this requires el7).
>
> I have upgrade all components as far as possible. Engine and hosts are
updated with release 3.6 All Hosts and hosted engine run Centos 6. I
understood VDSM is not updated on Centos 6 anymore, so yes cluster
compatibility is on 3.5


> On 3.5 hosts you manually edited  /etc/ovirt-hosted-engine/vm.conf on each
> host to move from 4G to 8G; the agent from 3.5 correctly restarted the
> engine VM at 8G, you find 8G on the VM but 3.6 engine is still showing it
> as an external VM with just 4G. Is this the issue?
>

This is correct.
I also reported the fact Guest info of VMs ( centos 5,6 and 7 ) is not
showing, maybe this is related?



>
>> Or will there be an update which fixes this ( with autoimport? )?
>>
>> Would you strongly advise to upgrade Hosts to RHEL/Centos 7?
>>
>> Op wo 3 feb. 2016 om 23:39 schreef Michal Skrivanek > >:
>>
>>>
>>>
>>> On 03 Feb 2016, at 12:02, Paul Groeneweg | Pazion 
>>> wrote:
>>>
>>> That is correct.
>>> Hosted engine was installed on 3.4 and upgrade several times.
>>>
>>> Let me know if you need any additional info.
>>>
>>> Op wo 3 feb. 2016 om 12:00 schreef Simone Tiraboschi <
>>> stira...@redhat.com>:
>>>
 On Wed, Feb 3, 2016 at 11:27 AM, Michal Skrivanek 
 wrote:

>
> On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion 
> wrote:
>
> I checked again and hosted engine still says 4096.
>
> I also see "Graphics protocol" says SPICE, but I connect through VNC…
>
>
> that might be similar issue as below, unless it’s an upgrade from 3.5.
> in which case bug 1297404 might be relevant for the console part
>
>
>
>
> Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion <
> p...@pazion.nl>:
>
>> Allright.
>> Still old value.
>> I'll keep an eye and report back tomorrow if it is still old value.
>>
>> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi <
>> stira...@redhat.com>:
>>
>>> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion <
>>> p...@pazion.nl> wrote:
>>>
 Hi Simone,

 I have exactly as you stated, but found maybe a problem/bug.

 1. I put hosted engine to maintenance and powered it off
 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to
 memSize=8192
 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
 /etc/init.d/ovirt-ha-broker
 restart && /etc/init.d/ovirt-ha-agent restart
 4. I started hosted-engine and turned off global maintenance.

 The hostedengine webinterface still says 4096MB

 Now I logged on with ssh and ran the command "free -m"
 This command shows:

 Mem:  7870   ...
 So, I believe my hostedengine was updated, but the webinterface is
 showing incorrect values: http://screencast.com/t/Bg5xU0Ja

 Any idea why web interface is not showing correct value under
 Defined or Physical memory?

>>>
>>> You are not the first that reports that: it seams that it's just a
>>> timeout/refresh issue and you have just to wait. Adding Michal here.
>>>
>>
> doesn’t sound likely, i would more suspect the import HE 3.6 feature,
> adding Roy
> originally there were no further config updates to external VMs once
> it was added
>
>
 He said that 'I am running oVirt 3.6 with CentOS 6 Hosts with hosted
 engine on nfs3',
 so the hosts are still at 3.5 and so the cluster compatibility level
 and so no auto-import at all.

>>>
>>> Ah ok, then the latter sentence applies:) there are no further updates
>>> to the HE VM configuration. And most of the values(including console) are
>>> just made up
>>> That's what 3.6 autoimport is improving(again, I'm not sure about the
>>> updates later on)
>>>
>>>
>>>

>
>
>>>

 Regards,
 Paul





 Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
 p...@pazion.nl>:

> Hi Simone,
>
> Thanks!
> I think I did not restart broker and agent before going out of
> maintenance mode.
> I will try these steps and let you know.
>
> Regards,
> Paul

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-04 Thread Simone Tiraboschi
On Thu, Feb 4, 2016 at 9:11 AM, Paul Groeneweg | Pazion 
wrote:

> What can I expect? webinterface of 3.5 Hosts will remain broken?
>

Just to clarify,
Paul, feel free to correct me, the engine is already at 3.6, the hosts are
still at 3.5 so the cluster compatibility level is still at 3.5 and so no
auto-import. In order to gain auto-import and other 3.6 feature you need to
upgrade all of you hosts to 3.6 (and this requires el7).

On 3.5 hosts you manually edited  /etc/ovirt-hosted-engine/vm.conf on each
host to move from 4G to 8G; the agent from 3.5 correctly restarted the
engine VM at 8G, you find 8G on the VM but 3.6 engine is still showing it
as an external VM with just 4G. Is this the issue?


> Or will there be an update which fixes this ( with autoimport? )?
>
> Would you strongly advise to upgrade Hosts to RHEL/Centos 7?
>
> Op wo 3 feb. 2016 om 23:39 schreef Michal Skrivanek :
>
>>
>>
>> On 03 Feb 2016, at 12:02, Paul Groeneweg | Pazion  wrote:
>>
>> That is correct.
>> Hosted engine was installed on 3.4 and upgrade several times.
>>
>> Let me know if you need any additional info.
>>
>> Op wo 3 feb. 2016 om 12:00 schreef Simone Tiraboschi > >:
>>
>>> On Wed, Feb 3, 2016 at 11:27 AM, Michal Skrivanek 
>>> wrote:
>>>

 On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion 
 wrote:

 I checked again and hosted engine still says 4096.

 I also see "Graphics protocol" says SPICE, but I connect through VNC…


 that might be similar issue as below, unless it’s an upgrade from 3.5.
 in which case bug 1297404 might be relevant for the console part




 Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion <
 p...@pazion.nl>:

> Allright.
> Still old value.
> I'll keep an eye and report back tomorrow if it is still old value.
>
> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi <
> stira...@redhat.com>:
>
>> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion <
>> p...@pazion.nl> wrote:
>>
>>> Hi Simone,
>>>
>>> I have exactly as you stated, but found maybe a problem/bug.
>>>
>>> 1. I put hosted engine to maintenance and powered it off
>>> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to
>>> memSize=8192
>>> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
>>> /etc/init.d/ovirt-ha-broker
>>> restart && /etc/init.d/ovirt-ha-agent restart
>>> 4. I started hosted-engine and turned off global maintenance.
>>>
>>> The hostedengine webinterface still says 4096MB
>>>
>>> Now I logged on with ssh and ran the command "free -m"
>>> This command shows:
>>>
>>> Mem:  7870   ...
>>> So, I believe my hostedengine was updated, but the webinterface is
>>> showing incorrect values: http://screencast.com/t/Bg5xU0Ja
>>>
>>> Any idea why web interface is not showing correct value under
>>> Defined or Physical memory?
>>>
>>
>> You are not the first that reports that: it seams that it's just a
>> timeout/refresh issue and you have just to wait. Adding Michal here.
>>
>
 doesn’t sound likely, i would more suspect the import HE 3.6 feature,
 adding Roy
 originally there were no further config updates to external VMs once it
 was added


>>> He said that 'I am running oVirt 3.6 with CentOS 6 Hosts with hosted
>>> engine on nfs3',
>>> so the hosts are still at 3.5 and so the cluster compatibility level and
>>> so no auto-import at all.
>>>
>>
>> Ah ok, then the latter sentence applies:) there are no further updates to
>> the HE VM configuration. And most of the values(including console) are just
>> made up
>> That's what 3.6 autoimport is improving(again, I'm not sure about the
>> updates later on)
>>
>>
>>
>>>


>>
>>>
>>> Regards,
>>> Paul
>>>
>>>
>>>
>>>
>>>
>>> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
>>> p...@pazion.nl>:
>>>
 Hi Simone,

 Thanks!
 I think I did not restart broker and agent before going out of
 maintenance mode.
 I will try these steps and let you know.

 Regards,
 Paul

 Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <
 stira...@redhat.com>:

> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <
> p...@pazion.nl> wrote:
>
>> I am trying to change memory of my hosted engine.
>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on
>> nfs3
>>
>
> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
> basically your hosts are still with oVirt 3.5.
>
> In order to edit the hosted-engine VM on oVirt 3.5, you have 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-03 Thread Simone Tiraboschi
On Wed, Feb 3, 2016 at 11:27 AM, Michal Skrivanek 
wrote:

>
> On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion  wrote:
>
> I checked again and hosted engine still says 4096.
>
> I also see "Graphics protocol" says SPICE, but I connect through VNC…
>
>
> that might be similar issue as below, unless it’s an upgrade from 3.5.
> in which case bug 1297404 might be relevant for the console part
>
>
>
>
> Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion  >:
>
>> Allright.
>> Still old value.
>> I'll keep an eye and report back tomorrow if it is still old value.
>>
>> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi > >:
>>
>>> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion 
>>> wrote:
>>>
 Hi Simone,

 I have exactly as you stated, but found maybe a problem/bug.

 1. I put hosted engine to maintenance and powered it off
 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
 /etc/init.d/ovirt-ha-broker
 restart && /etc/init.d/ovirt-ha-agent restart
 4. I started hosted-engine and turned off global maintenance.

 The hostedengine webinterface still says 4096MB

 Now I logged on with ssh and ran the command "free -m"
 This command shows:

 Mem:  7870   ...
 So, I believe my hostedengine was updated, but the webinterface is
 showing incorrect values: http://screencast.com/t/Bg5xU0Ja

 Any idea why web interface is not showing correct value under Defined
 or Physical memory?

>>>
>>> You are not the first that reports that: it seams that it's just a
>>> timeout/refresh issue and you have just to wait. Adding Michal here.
>>>
>>
> doesn’t sound likely, i would more suspect the import HE 3.6 feature,
> adding Roy
> originally there were no further config updates to external VMs once it
> was added
>
>
He said that 'I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine
on nfs3',
so the hosts are still at 3.5 and so the cluster compatibility level and so
no auto-import at all.


>
>
>>>

 Regards,
 Paul





 Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
 p...@pazion.nl>:

> Hi Simone,
>
> Thanks!
> I think I did not restart broker and agent before going out of
> maintenance mode.
> I will try these steps and let you know.
>
> Regards,
> Paul
>
> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <
> stira...@redhat.com>:
>
>> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <
>> p...@pazion.nl> wrote:
>>
>>> I am trying to change memory of my hosted engine.
>>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>>>
>>
>> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
>> basically your hosts are still with oVirt 3.5.
>>
>> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
>> 1. set global-maintenance mode
>> 2. shutdown the engine VM
>> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host
>> (keeping ti coherent is up to you, take a backup)
>> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
>> 5. exits global maintenance mode
>>
>> Updating to oVirt 3.6 you will be able to edit some parameters of the
>> engine VM from the engine itself.
>>
>>
>>>
>>> 1. I put hosted-engine to maintenance, shutdown vm
>>> 2. update /etc/ovirt-hosted-engine/vm.conf
>>> 3. restart vm disable maintenance
>>>
>>> Memory is still old value.
>>> How can I change the hosted engine VM?
>>>
>>> I did found:
>>> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>>>
>>> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
>>> "conf_volume_UUID" entry.
>>>
>>> Do I need to create a shared config volume entry ( conf_volume_UUID
>>> ), so I can edit hosted engine VM? If so, how can this be done?
>>>
>>> I did try to rerun engine-setup, but this did not trigger anything.
>>>
>>> Kind regards,
>>>
>>> Paul Groeneweg
>>> Pazion
>>>
>>>  ***disclaimer***
>>> "This e-mail and any attachments thereto may contain information
>>> which is confidential and/or protected by intellectual property rights 
>>> and
>>> are intended for the sole use of the recipient(s) named above. Any use 
>>> of
>>> the information contained herein (including, but not limited to, total 
>>> or
>>> partial reproduction, communication or distribution in any form) by 
>>> persons
>>> other than the designated recipient(s) is prohibited. If you have 
>>> received
>>> this e-mail in error, please notify the sender 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-03 Thread Michal Skrivanek

> On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion  wrote:
> 
> I checked again and hosted engine still says 4096.
> 
> I also see "Graphics protocol" says SPICE, but I connect through VNC…

that might be similar issue as below, unless it’s an upgrade from 3.5.
in which case bug 1297404 might be relevant for the console part

> 
> 
> 
> Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion  >:
> Allright.
> Still old value.
> I'll keep an eye and report back tomorrow if it is still old value.
> 
> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi  >:
> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion  > wrote:
> Hi Simone,
> 
> I have exactly as you stated, but found maybe a problem/bug.
> 
> 1. I put hosted engine to maintenance and powered it off
> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
> /etc/init.d/ovirt-ha-broker restart && /etc/init.d/ovirt-ha-agent restart
> 4. I started hosted-engine and turned off global maintenance.
> 
> The hostedengine webinterface still says 4096MB
> 
> Now I logged on with ssh and ran the command "free -m"
> This command shows:
> Mem:  7870   ...
> 
> So, I believe my hostedengine was updated, but the webinterface is showing 
> incorrect values: http://screencast.com/t/Bg5xU0Ja 
> 
> 
> Any idea why web interface is not showing correct value under Defined or 
> Physical memory?
> 
> You are not the first that reports that: it seams that it's just a 
> timeout/refresh issue and you have just to wait. Adding Michal here.

doesn’t sound likely, i would more suspect the import HE 3.6 feature, adding Roy
originally there were no further config updates to external VMs once it was 
added


>  
> 
> Regards,
> Paul
> 
> 
> 
> 
> 
> 
> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion  >:
> Hi Simone,
> 
> Thanks!
> I think I did not restart broker and agent before going out of maintenance 
> mode.
> I will try these steps and let you know.
> 
> Regards,
> Paul
> 
> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi  >:
> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion  > wrote:
> I am trying to change memory of my hosted engine.
> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
> 
> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so basically 
> your hosts are still with oVirt 3.5.
> 
> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
> 1. set global-maintenance mode
> 2. shutdown the engine VM
> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping ti 
> coherent is up to you, take a backup)
> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
> 5. exits global maintenance mode
> 
> Updating to oVirt 3.6 you will be able to edit some parameters of the engine 
> VM from the engine itself.
>  
> 
> 1. I put hosted-engine to maintenance, shutdown vm
> 2. update /etc/ovirt-hosted-engine/vm.conf 
> 3. restart vm disable maintenance
> 
> Memory is still old value.
> How can I change the hosted engine VM?
> 
> I did found: 
> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage 
> 
> 
> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no 
> "conf_volume_UUID" entry.
> 
> Do I need to create a shared config volume entry ( conf_volume_UUID ), so I 
> can edit hosted engine VM? If so, how can this be done?
> 
> I did try to rerun engine-setup, but this did not trigger anything.
> 
> Kind regards,
> 
> Paul Groeneweg
> Pazion
> 
>  ***disclaimer*** 
> "This e-mail and any attachments thereto may contain information which is 
> confidential and/or protected by intellectual property rights and are 
> intended for the sole use of the recipient(s) named above. Any use of the 
> information contained herein (including, but not limited to, total or partial 
> reproduction, communication or distribution in any form) by persons other 
> than the designated recipient(s) is prohibited. If you have received this 
> e-mail in error, please notify the sender either by telephone or by e-mail 
> and delete the material from any computer. Thank you for your cooperation."
> -- 
> Met vriendelijke groeten,
> 
> Paul Groeneweg
> Pazion
> Webdevelopment  -  Hosting  -  Apps
> 
> T +31 26 3020038 
> M +31 614 277 577
> E  p...@pazion.nl <>
> 
>  ***disclaimer*** 
> "This e-mail and any attachments thereto may contain information which is 
> confidential and/or protected by intellectual property rights and are 
> intended for the sole use 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-03 Thread Paul Groeneweg | Pazion
That is correct.
Hosted engine was installed on 3.4 and upgrade several times.

Let me know if you need any additional info.

Op wo 3 feb. 2016 om 12:00 schreef Simone Tiraboschi :

> On Wed, Feb 3, 2016 at 11:27 AM, Michal Skrivanek 
> wrote:
>
>>
>> On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion  wrote:
>>
>> I checked again and hosted engine still says 4096.
>>
>> I also see "Graphics protocol" says SPICE, but I connect through VNC…
>>
>>
>> that might be similar issue as below, unless it’s an upgrade from 3.5.
>> in which case bug 1297404 might be relevant for the console part
>>
>>
>>
>>
>> Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion <
>> p...@pazion.nl>:
>>
>>> Allright.
>>> Still old value.
>>> I'll keep an eye and report back tomorrow if it is still old value.
>>>
>>> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi <
>>> stira...@redhat.com>:
>>>
 On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion  wrote:

> Hi Simone,
>
> I have exactly as you stated, but found maybe a problem/bug.
>
> 1. I put hosted engine to maintenance and powered it off
> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
> /etc/init.d/ovirt-ha-broker
> restart && /etc/init.d/ovirt-ha-agent restart
> 4. I started hosted-engine and turned off global maintenance.
>
> The hostedengine webinterface still says 4096MB
>
> Now I logged on with ssh and ran the command "free -m"
> This command shows:
>
> Mem:  7870   ...
> So, I believe my hostedengine was updated, but the webinterface is
> showing incorrect values: http://screencast.com/t/Bg5xU0Ja
>
> Any idea why web interface is not showing correct value under Defined
> or Physical memory?
>

 You are not the first that reports that: it seams that it's just a
 timeout/refresh issue and you have just to wait. Adding Michal here.

>>>
>> doesn’t sound likely, i would more suspect the import HE 3.6 feature,
>> adding Roy
>> originally there were no further config updates to external VMs once it
>> was added
>>
>>
> He said that 'I am running oVirt 3.6 with CentOS 6 Hosts with hosted
> engine on nfs3',
> so the hosts are still at 3.5 and so the cluster compatibility level and
> so no auto-import at all.
>
>
>>
>>

>
> Regards,
> Paul
>
>
>
>
>
> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
> p...@pazion.nl>:
>
>> Hi Simone,
>>
>> Thanks!
>> I think I did not restart broker and agent before going out of
>> maintenance mode.
>> I will try these steps and let you know.
>>
>> Regards,
>> Paul
>>
>> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <
>> stira...@redhat.com>:
>>
>>> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <
>>> p...@pazion.nl> wrote:
>>>
 I am trying to change memory of my hosted engine.
 I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on
 nfs3

>>>
>>> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
>>> basically your hosts are still with oVirt 3.5.
>>>
>>> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
>>> 1. set global-maintenance mode
>>> 2. shutdown the engine VM
>>> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host
>>> (keeping ti coherent is up to you, take a backup)
>>> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
>>> 5. exits global maintenance mode
>>>
>>> Updating to oVirt 3.6 you will be able to edit some parameters of
>>> the engine VM from the engine itself.
>>>
>>>

 1. I put hosted-engine to maintenance, shutdown vm
 2. update /etc/ovirt-hosted-engine/vm.conf
 3. restart vm disable maintenance

 Memory is still old value.
 How can I change the hosted engine VM?

 I did found:
 http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage

 When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is
 no
 "conf_volume_UUID" entry.

 Do I need to create a shared config volume entry ( conf_volume_UUID
 ), so I can edit hosted engine VM? If so, how can this be done?

 I did try to rerun engine-setup, but this did not trigger anything.

 Kind regards,

 Paul Groeneweg
 Pazion

  ***disclaimer***
 "This e-mail and any attachments thereto may contain information
 which is confidential and/or protected by intellectual property rights 
 and
 are intended for the sole use of the 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-03 Thread Michal Skrivanek


> On 03 Feb 2016, at 12:02, Paul Groeneweg | Pazion  wrote:
> 
> That is correct. 
> Hosted engine was installed on 3.4 and upgrade several times.
> 
> Let me know if you need any additional info.
> 
> Op wo 3 feb. 2016 om 12:00 schreef Simone Tiraboschi :
>> On Wed, Feb 3, 2016 at 11:27 AM, Michal Skrivanek  
>> wrote:
>>> 
 On 03 Feb 2016, at 08:07, Paul Groeneweg | Pazion  wrote:
 
 I checked again and hosted engine still says 4096.
 
 I also see "Graphics protocol" says SPICE, but I connect through VNC…
>>> 
>>> that might be similar issue as below, unless it’s an upgrade from 3.5.
>>> in which case bug 1297404 might be relevant for the console part
>>> 
 
 
 
 Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion 
 :
> Allright.
> Still old value.
> I'll keep an eye and report back tomorrow if it is still old value.
> 
> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi 
> :
>> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion  
>> wrote:
>>> Hi Simone,
>>> 
>>> I have exactly as you stated, but found maybe a problem/bug.
>>> 
>>> 1. I put hosted engine to maintenance and powered it off
>>> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
>>> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
>>> /etc/init.d/ovirt-ha-broker restart && /etc/init.d/ovirt-ha-agent 
>>> restart
>>> 4. I started hosted-engine and turned off global maintenance.
>>> 
>>> The hostedengine webinterface still says 4096MB
>>> 
>>> Now I logged on with ssh and ran the command "free -m"
>>> This command shows:
>>> Mem:  7870   ...
>>> 
>>> So, I believe my hostedengine was updated, but the webinterface is 
>>> showing incorrect values: http://screencast.com/t/Bg5xU0Ja
>>> 
>>> Any idea why web interface is not showing correct value under Defined 
>>> or Physical memory?
>> 
>> You are not the first that reports that: it seams that it's just a 
>> timeout/refresh issue and you have just to wait. Adding Michal here.
>>> 
>>> doesn’t sound likely, i would more suspect the import HE 3.6 feature, 
>>> adding Roy
>>> originally there were no further config updates to external VMs once it was 
>>> added
>> 
>> He said that 'I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine 
>> on nfs3',
>> so the hosts are still at 3.5 and so the cluster compatibility level and so 
>> no auto-import at all.

Ah ok, then the latter sentence applies:) there are no further updates to the 
HE VM configuration. And most of the values(including console) are just made up
That's what 3.6 autoimport is improving(again, I'm not sure about the updates 
later on)

>>  
>>> 
>>  
>>> 
>>> Regards,
>>> Paul
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion 
>>> :
 Hi Simone,
 
 Thanks!
 I think I did not restart broker and agent before going out of 
 maintenance mode.
 I will try these steps and let you know.
 
 Regards,
 Paul
 
 Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi 
 :
> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion 
>  wrote:
>> I am trying to change memory of my hosted engine.
>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
> 
> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so 
> basically your hosts are still with oVirt 3.5.
> 
> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
> 1. set global-maintenance mode
> 2. shutdown the engine VM
> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host 
> (keeping ti coherent is up to you, take a backup)
> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
> 5. exits global maintenance mode
> 
> Updating to oVirt 3.6 you will be able to edit some parameters of the 
> engine VM from the engine itself.
>  
> 
>> 
>> 1. I put hosted-engine to maintenance, shutdown vm
>> 2. update /etc/ovirt-hosted-engine/vm.conf 
>> 3. restart vm disable maintenance
>> 
>> Memory is still old value.
>> How can I change the hosted engine VM?
>> 
>> I did found: 
>> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>> 
>> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no 
>> "conf_volume_UUID" entry.
>> 
>> Do I need to 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Simone Tiraboschi
On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion 
wrote:

> Hi Simone,
>
> I have exactly as you stated, but found maybe a problem/bug.
>
> 1. I put hosted engine to maintenance and powered it off
> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
> /etc/init.d/ovirt-ha-broker
> restart && /etc/init.d/ovirt-ha-agent restart
> 4. I started hosted-engine and turned off global maintenance.
>
> The hostedengine webinterface still says 4096MB
>
> Now I logged on with ssh and ran the command "free -m"
> This command shows:
>
> Mem:  7870   ...
> So, I believe my hostedengine was updated, but the webinterface is showing
> incorrect values: http://screencast.com/t/Bg5xU0Ja
>
> Any idea why web interface is not showing correct value under Defined or
> Physical memory?
>

You are not the first that reports that: it seams that it's just a
timeout/refresh issue and you have just to wait. Adding Michal here.


>
> Regards,
> Paul
>
>
>
>
>
> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion  >:
>
>> Hi Simone,
>>
>> Thanks!
>> I think I did not restart broker and agent before going out of
>> maintenance mode.
>> I will try these steps and let you know.
>>
>> Regards,
>> Paul
>>
>> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi > >:
>>
>>> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion >> > wrote:
>>>
 I am trying to change memory of my hosted engine.
 I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3

>>>
>>> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
>>> basically your hosts are still with oVirt 3.5.
>>>
>>> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
>>> 1. set global-maintenance mode
>>> 2. shutdown the engine VM
>>> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping
>>> ti coherent is up to you, take a backup)
>>> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
>>> 5. exits global maintenance mode
>>>
>>> Updating to oVirt 3.6 you will be able to edit some parameters of the
>>> engine VM from the engine itself.
>>>
>>>

 1. I put hosted-engine to maintenance, shutdown vm
 2. update /etc/ovirt-hosted-engine/vm.conf
 3. restart vm disable maintenance

 Memory is still old value.
 How can I change the hosted engine VM?

 I did found:
 http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage

 When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
 "conf_volume_UUID" entry.

 Do I need to create a shared config volume entry ( conf_volume_UUID ),
 so I can edit hosted engine VM? If so, how can this be done?

 I did try to rerun engine-setup, but this did not trigger anything.

 Kind regards,

 Paul Groeneweg
 Pazion

  ***disclaimer***
 "This e-mail and any attachments thereto may contain information which
 is confidential and/or protected by intellectual property rights and are
 intended for the sole use of the recipient(s) named above. Any use of the
 information contained herein (including, but not limited to, total or
 partial reproduction, communication or distribution in any form) by persons
 other than the designated recipient(s) is prohibited. If you have received
 this e-mail in error, please notify the sender either by telephone or by
 e-mail and delete the material from any computer. Thank you for your
 cooperation."
 --
 Met vriendelijke groeten,

 Paul Groeneweg
 Pazion
 Webdevelopment  -  Hosting  -  Apps

 T +31 26 3020038
 M +31 614 277 577
 E  p...@pazion.nl

  ***disclaimer***
 "This e-mail and any attachments thereto may contain information which
 is confidential and/or protected by intellectual property rights and are
 intended for the sole use of the recipient(s) named above. Any use of the
 information contained herein (including, but not limited to, total or
 partial reproduction, communication or distribution in any form) by persons
 other than the designated recipient(s) is prohibited. If you have received
 this e-mail in error, please notify the sender either by telephone or by
 e-mail and delete the material from any computer. Thank you for your
 cooperation."

 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


>>> --
>> Met vriendelijke groeten,
>>
>> Paul Groeneweg
>> Pazion
>> Webdevelopment  -  Hosting  -  Apps
>>
>> T +31 26 3020038
>> M +31 614 277 577
>> E  p...@pazion.nl
>>
>>  ***disclaimer***
>> "This e-mail and any attachments thereto may contain information which is
>> confidential and/or protected by intellectual 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Paul Groeneweg | Pazion
Hi Simone,

I have exactly as you stated, but found maybe a problem/bug.

1. I put hosted engine to maintenance and powered it off
2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
3. I restarted both ovirt-ha-agent and ovirt-ha-broker:
/etc/init.d/ovirt-ha-broker
restart && /etc/init.d/ovirt-ha-agent restart
4. I started hosted-engine and turned off global maintenance.

The hostedengine webinterface still says 4096MB

Now I logged on with ssh and ran the command "free -m"
This command shows:

Mem:  7870   ...
So, I believe my hostedengine was updated, but the webinterface is showing
incorrect values: http://screencast.com/t/Bg5xU0Ja

Any idea why web interface is not showing correct value under Defined or
Physical memory?

Regards,
Paul





Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion :

> Hi Simone,
>
> Thanks!
> I think I did not restart broker and agent before going out of maintenance
> mode.
> I will try these steps and let you know.
>
> Regards,
> Paul
>
> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi  >:
>
>> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion 
>> wrote:
>>
>>> I am trying to change memory of my hosted engine.
>>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>>>
>>
>> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
>> basically your hosts are still with oVirt 3.5.
>>
>> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
>> 1. set global-maintenance mode
>> 2. shutdown the engine VM
>> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping
>> ti coherent is up to you, take a backup)
>> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
>> 5. exits global maintenance mode
>>
>> Updating to oVirt 3.6 you will be able to edit some parameters of the
>> engine VM from the engine itself.
>>
>>
>>>
>>> 1. I put hosted-engine to maintenance, shutdown vm
>>> 2. update /etc/ovirt-hosted-engine/vm.conf
>>> 3. restart vm disable maintenance
>>>
>>> Memory is still old value.
>>> How can I change the hosted engine VM?
>>>
>>> I did found:
>>> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>>>
>>> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
>>> "conf_volume_UUID" entry.
>>>
>>> Do I need to create a shared config volume entry ( conf_volume_UUID ),
>>> so I can edit hosted engine VM? If so, how can this be done?
>>>
>>> I did try to rerun engine-setup, but this did not trigger anything.
>>>
>>> Kind regards,
>>>
>>> Paul Groeneweg
>>> Pazion
>>>
>>>  ***disclaimer***
>>> "This e-mail and any attachments thereto may contain information which
>>> is confidential and/or protected by intellectual property rights and are
>>> intended for the sole use of the recipient(s) named above. Any use of the
>>> information contained herein (including, but not limited to, total or
>>> partial reproduction, communication or distribution in any form) by persons
>>> other than the designated recipient(s) is prohibited. If you have received
>>> this e-mail in error, please notify the sender either by telephone or by
>>> e-mail and delete the material from any computer. Thank you for your
>>> cooperation."
>>> --
>>> Met vriendelijke groeten,
>>>
>>> Paul Groeneweg
>>> Pazion
>>> Webdevelopment  -  Hosting  -  Apps
>>>
>>> T +31 26 3020038
>>> M +31 614 277 577
>>> E  p...@pazion.nl
>>>
>>>  ***disclaimer***
>>> "This e-mail and any attachments thereto may contain information which
>>> is confidential and/or protected by intellectual property rights and are
>>> intended for the sole use of the recipient(s) named above. Any use of the
>>> information contained herein (including, but not limited to, total or
>>> partial reproduction, communication or distribution in any form) by persons
>>> other than the designated recipient(s) is prohibited. If you have received
>>> this e-mail in error, please notify the sender either by telephone or by
>>> e-mail and delete the material from any computer. Thank you for your
>>> cooperation."
>>>
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>> --
> Met vriendelijke groeten,
>
> Paul Groeneweg
> Pazion
> Webdevelopment  -  Hosting  -  Apps
>
> T +31 26 3020038
> M +31 614 277 577
> E  p...@pazion.nl
>
>  ***disclaimer***
> "This e-mail and any attachments thereto may contain information which is
> confidential and/or protected by intellectual property rights and are
> intended for the sole use of the recipient(s) named above. Any use of the
> information contained herein (including, but not limited to, total or
> partial reproduction, communication or distribution in any form) by persons
> other than the designated recipient(s) is prohibited. If you have received
> this e-mail in error, please notify the sender either by 

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Paul Groeneweg | Pazion
Allright.
Still old value.
I'll keep an eye and report back tomorrow if it is still old value.

Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi :

> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion 
> wrote:
>
>> Hi Simone,
>>
>> I have exactly as you stated, but found maybe a problem/bug.
>>
>> 1. I put hosted engine to maintenance and powered it off
>> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
>> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
>> /etc/init.d/ovirt-ha-broker
>> restart && /etc/init.d/ovirt-ha-agent restart
>> 4. I started hosted-engine and turned off global maintenance.
>>
>> The hostedengine webinterface still says 4096MB
>>
>> Now I logged on with ssh and ran the command "free -m"
>> This command shows:
>>
>> Mem:  7870   ...
>> So, I believe my hostedengine was updated, but the webinterface is
>> showing incorrect values: http://screencast.com/t/Bg5xU0Ja
>>
>> Any idea why web interface is not showing correct value under Defined or
>> Physical memory?
>>
>
> You are not the first that reports that: it seams that it's just a
> timeout/refresh issue and you have just to wait. Adding Michal here.
>
>
>>
>> Regards,
>> Paul
>>
>>
>>
>>
>>
>> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
>> p...@pazion.nl>:
>>
>>> Hi Simone,
>>>
>>> Thanks!
>>> I think I did not restart broker and agent before going out of
>>> maintenance mode.
>>> I will try these steps and let you know.
>>>
>>> Regards,
>>> Paul
>>>
>>> Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <
>>> stira...@redhat.com>:
>>>
 On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <
 p...@pazion.nl> wrote:

> I am trying to change memory of my hosted engine.
> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>

 We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
 basically your hosts are still with oVirt 3.5.

 In order to edit the hosted-engine VM on oVirt 3.5, you have to:
 1. set global-maintenance mode
 2. shutdown the engine VM
 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping
 ti coherent is up to you, take a backup)
 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
 5. exits global maintenance mode

 Updating to oVirt 3.6 you will be able to edit some parameters of the
 engine VM from the engine itself.


>
> 1. I put hosted-engine to maintenance, shutdown vm
> 2. update /etc/ovirt-hosted-engine/vm.conf
> 3. restart vm disable maintenance
>
> Memory is still old value.
> How can I change the hosted engine VM?
>
> I did found:
> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>
> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
> "conf_volume_UUID" entry.
>
> Do I need to create a shared config volume entry ( conf_volume_UUID
> ), so I can edit hosted engine VM? If so, how can this be done?
>
> I did try to rerun engine-setup, but this did not trigger anything.
>
> Kind regards,
>
> Paul Groeneweg
> Pazion
>
>  ***disclaimer***
> "This e-mail and any attachments thereto may contain information which
> is confidential and/or protected by intellectual property rights and are
> intended for the sole use of the recipient(s) named above. Any use of the
> information contained herein (including, but not limited to, total or
> partial reproduction, communication or distribution in any form) by 
> persons
> other than the designated recipient(s) is prohibited. If you have received
> this e-mail in error, please notify the sender either by telephone or by
> e-mail and delete the material from any computer. Thank you for your
> cooperation."
> --
> Met vriendelijke groeten,
>
> Paul Groeneweg
> Pazion
> Webdevelopment  -  Hosting  -  Apps
>
> T +31 26 3020038
> M +31 614 277 577
> E  p...@pazion.nl
>
>  ***disclaimer***
> "This e-mail and any attachments thereto may contain information which
> is confidential and/or protected by intellectual property rights and are
> intended for the sole use of the recipient(s) named above. Any use of the
> information contained herein (including, but not limited to, total or
> partial reproduction, communication or distribution in any form) by 
> persons
> other than the designated recipient(s) is prohibited. If you have received
> this e-mail in error, please notify the sender either by telephone or by
> e-mail and delete the material from any computer. Thank you for your
> cooperation."
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Simone Tiraboschi
On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion 
wrote:

> I am trying to change memory of my hosted engine.
> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>

We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
basically your hosts are still with oVirt 3.5.

In order to edit the hosted-engine VM on oVirt 3.5, you have to:
1. set global-maintenance mode
2. shutdown the engine VM
3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping ti
coherent is up to you, take a backup)
4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
5. exits global maintenance mode

Updating to oVirt 3.6 you will be able to edit some parameters of the
engine VM from the engine itself.


>
> 1. I put hosted-engine to maintenance, shutdown vm
> 2. update /etc/ovirt-hosted-engine/vm.conf
> 3. restart vm disable maintenance
>
> Memory is still old value.
> How can I change the hosted engine VM?
>
> I did found:
> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>
> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
> "conf_volume_UUID" entry.
>
> Do I need to create a shared config volume entry ( conf_volume_UUID ), so
> I can edit hosted engine VM? If so, how can this be done?
>
> I did try to rerun engine-setup, but this did not trigger anything.
>
> Kind regards,
>
> Paul Groeneweg
> Pazion
>
>  ***disclaimer***
> "This e-mail and any attachments thereto may contain information which is
> confidential and/or protected by intellectual property rights and are
> intended for the sole use of the recipient(s) named above. Any use of the
> information contained herein (including, but not limited to, total or
> partial reproduction, communication or distribution in any form) by persons
> other than the designated recipient(s) is prohibited. If you have received
> this e-mail in error, please notify the sender either by telephone or by
> e-mail and delete the material from any computer. Thank you for your
> cooperation."
> --
> Met vriendelijke groeten,
>
> Paul Groeneweg
> Pazion
> Webdevelopment  -  Hosting  -  Apps
>
> T +31 26 3020038
> M +31 614 277 577
> E  p...@pazion.nl
>
>  ***disclaimer***
> "This e-mail and any attachments thereto may contain information which is
> confidential and/or protected by intellectual property rights and are
> intended for the sole use of the recipient(s) named above. Any use of the
> information contained herein (including, but not limited to, total or
> partial reproduction, communication or distribution in any form) by persons
> other than the designated recipient(s) is prohibited. If you have received
> this e-mail in error, please notify the sender either by telephone or by
> e-mail and delete the material from any computer. Thank you for your
> cooperation."
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Paul Groeneweg | Pazion
Hi Simone,

Thanks!
I think I did not restart broker and agent before going out of maintenance
mode.
I will try these steps and let you know.

Regards,
Paul

Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi :

> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion 
> wrote:
>
>> I am trying to change memory of my hosted engine.
>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>>
>
> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
> basically your hosts are still with oVirt 3.5.
>
> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
> 1. set global-maintenance mode
> 2. shutdown the engine VM
> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping ti
> coherent is up to you, take a backup)
> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
> 5. exits global maintenance mode
>
> Updating to oVirt 3.6 you will be able to edit some parameters of the
> engine VM from the engine itself.
>
>
>>
>> 1. I put hosted-engine to maintenance, shutdown vm
>> 2. update /etc/ovirt-hosted-engine/vm.conf
>> 3. restart vm disable maintenance
>>
>> Memory is still old value.
>> How can I change the hosted engine VM?
>>
>> I did found:
>> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>>
>> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
>> "conf_volume_UUID" entry.
>>
>> Do I need to create a shared config volume entry ( conf_volume_UUID ),
>> so I can edit hosted engine VM? If so, how can this be done?
>>
>> I did try to rerun engine-setup, but this did not trigger anything.
>>
>> Kind regards,
>>
>> Paul Groeneweg
>> Pazion
>>
>>  ***disclaimer***
>> "This e-mail and any attachments thereto may contain information which is
>> confidential and/or protected by intellectual property rights and are
>> intended for the sole use of the recipient(s) named above. Any use of the
>> information contained herein (including, but not limited to, total or
>> partial reproduction, communication or distribution in any form) by persons
>> other than the designated recipient(s) is prohibited. If you have received
>> this e-mail in error, please notify the sender either by telephone or by
>> e-mail and delete the material from any computer. Thank you for your
>> cooperation."
>> --
>> Met vriendelijke groeten,
>>
>> Paul Groeneweg
>> Pazion
>> Webdevelopment  -  Hosting  -  Apps
>>
>> T +31 26 3020038
>> M +31 614 277 577
>> E  p...@pazion.nl
>>
>>  ***disclaimer***
>> "This e-mail and any attachments thereto may contain information which is
>> confidential and/or protected by intellectual property rights and are
>> intended for the sole use of the recipient(s) named above. Any use of the
>> information contained herein (including, but not limited to, total or
>> partial reproduction, communication or distribution in any form) by persons
>> other than the designated recipient(s) is prohibited. If you have received
>> this e-mail in error, please notify the sender either by telephone or by
>> e-mail and delete the material from any computer. Thank you for your
>> cooperation."
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
> --
Met vriendelijke groeten,

Paul Groeneweg
Pazion
Webdevelopment  -  Hosting  -  Apps

T +31 26 3020038
M +31 614 277 577
E  p...@pazion.nl

 ***disclaimer***
"This e-mail and any attachments thereto may contain information which is
confidential and/or protected by intellectual property rights and are
intended for the sole use of the recipient(s) named above. Any use of the
information contained herein (including, but not limited to, total or
partial reproduction, communication or distribution in any form) by persons
other than the designated recipient(s) is prohibited. If you have received
this e-mail in error, please notify the sender either by telephone or by
e-mail and delete the material from any computer. Thank you for your
cooperation."
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] howto change hosted-engine config memory

2016-02-02 Thread Paul Groeneweg | Pazion
I checked again and hosted engine still says 4096.

I also see "Graphics protocol" says SPICE, but I connect through VNC...



Op di 2 feb. 2016 om 21:02 schreef Paul Groeneweg | Pazion :

> Allright.
> Still old value.
> I'll keep an eye and report back tomorrow if it is still old value.
>
> Op di 2 feb. 2016 om 20:45 schreef Simone Tiraboschi  >:
>
>> On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion 
>> wrote:
>>
>>> Hi Simone,
>>>
>>> I have exactly as you stated, but found maybe a problem/bug.
>>>
>>> 1. I put hosted engine to maintenance and powered it off
>>> 2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
>>> 3. I restarted both ovirt-ha-agent and ovirt-ha-broker: 
>>> /etc/init.d/ovirt-ha-broker
>>> restart && /etc/init.d/ovirt-ha-agent restart
>>> 4. I started hosted-engine and turned off global maintenance.
>>>
>>> The hostedengine webinterface still says 4096MB
>>>
>>> Now I logged on with ssh and ran the command "free -m"
>>> This command shows:
>>>
>>> Mem:  7870   ...
>>> So, I believe my hostedengine was updated, but the webinterface is
>>> showing incorrect values: http://screencast.com/t/Bg5xU0Ja
>>>
>>> Any idea why web interface is not showing correct value under Defined or
>>> Physical memory?
>>>
>>
>> You are not the first that reports that: it seams that it's just a
>> timeout/refresh issue and you have just to wait. Adding Michal here.
>>
>>
>>>
>>> Regards,
>>> Paul
>>>
>>>
>>>
>>>
>>>
>>> Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <
>>> p...@pazion.nl>:
>>>
 Hi Simone,

 Thanks!
 I think I did not restart broker and agent before going out of
 maintenance mode.
 I will try these steps and let you know.

 Regards,
 Paul

 Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <
 stira...@redhat.com>:

> On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <
> p...@pazion.nl> wrote:
>
>> I am trying to change memory of my hosted engine.
>> I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3
>>
>
> We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so
> basically your hosts are still with oVirt 3.5.
>
> In order to edit the hosted-engine VM on oVirt 3.5, you have to:
> 1. set global-maintenance mode
> 2. shutdown the engine VM
> 3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host
> (keeping ti coherent is up to you, take a backup)
> 4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
> 5. exits global maintenance mode
>
> Updating to oVirt 3.6 you will be able to edit some parameters of the
> engine VM from the engine itself.
>
>
>>
>> 1. I put hosted-engine to maintenance, shutdown vm
>> 2. update /etc/ovirt-hosted-engine/vm.conf
>> 3. restart vm disable maintenance
>>
>> Memory is still old value.
>> How can I change the hosted engine VM?
>>
>> I did found:
>> http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage
>>
>> When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
>> "conf_volume_UUID" entry.
>>
>> Do I need to create a shared config volume entry ( conf_volume_UUID
>> ), so I can edit hosted engine VM? If so, how can this be done?
>>
>> I did try to rerun engine-setup, but this did not trigger anything.
>>
>> Kind regards,
>>
>> Paul Groeneweg
>> Pazion
>>
>>  ***disclaimer***
>> "This e-mail and any attachments thereto may contain information
>> which is confidential and/or protected by intellectual property rights 
>> and
>> are intended for the sole use of the recipient(s) named above. Any use of
>> the information contained herein (including, but not limited to, total or
>> partial reproduction, communication or distribution in any form) by 
>> persons
>> other than the designated recipient(s) is prohibited. If you have 
>> received
>> this e-mail in error, please notify the sender either by telephone or by
>> e-mail and delete the material from any computer. Thank you for your
>> cooperation."
>> --
>> Met vriendelijke groeten,
>>
>> Paul Groeneweg
>> Pazion
>> Webdevelopment  -  Hosting  -  Apps
>>
>> T +31 26 3020038
>> M +31 614 277 577
>> E  p...@pazion.nl
>>
>>  ***disclaimer***
>> "This e-mail and any attachments thereto may contain information
>> which is confidential and/or protected by intellectual property rights 
>> and
>> are intended for the sole use of the recipient(s) named above. Any use of
>> the information contained herein (including, but not limited to, total or
>> partial reproduction, communication or distribution in any form) by 
>> persons
>> other than the designated 

[ovirt-users] howto change hosted-engine config memory

2016-02-01 Thread Paul Groeneweg | Pazion
I am trying to change memory of my hosted engine.
I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3

1. I put hosted-engine to maintenance, shutdown vm
2. update /etc/ovirt-hosted-engine/vm.conf
3. restart vm disable maintenance

Memory is still old value.
How can I change the hosted engine VM?

I did found:
http://www.ovirt.org/Features/Hosted_Engine_configuration_on_shared_storage

When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no
"conf_volume_UUID" entry.

Do I need to create a shared config volume entry ( conf_volume_UUID ), so I
can edit hosted engine VM? If so, how can this be done?

I did try to rerun engine-setup, but this did not trigger anything.

Kind regards,

Paul Groeneweg
Pazion

 ***disclaimer***
"This e-mail and any attachments thereto may contain information which is
confidential and/or protected by intellectual property rights and are
intended for the sole use of the recipient(s) named above. Any use of the
information contained herein (including, but not limited to, total or
partial reproduction, communication or distribution in any form) by persons
other than the designated recipient(s) is prohibited. If you have received
this e-mail in error, please notify the sender either by telephone or by
e-mail and delete the material from any computer. Thank you for your
cooperation."
-- 
Met vriendelijke groeten,

Paul Groeneweg
Pazion
Webdevelopment  -  Hosting  -  Apps

T +31 26 3020038
M +31 614 277 577
E  p...@pazion.nl

 ***disclaimer***
"This e-mail and any attachments thereto may contain information which is
confidential and/or protected by intellectual property rights and are
intended for the sole use of the recipient(s) named above. Any use of the
information contained herein (including, but not limited to, total or
partial reproduction, communication or distribution in any form) by persons
other than the designated recipient(s) is prohibited. If you have received
this e-mail in error, please notify the sender either by telephone or by
e-mail and delete the material from any computer. Thank you for your
cooperation."
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users