subject:"\[ovirt\-users\] oVirt 4 Hosted Engine deploy on fc storage \- \[ ERROR \] Failed to execute stage 'Misc configuration'\: \[Errno 101\] Network is unreachable"

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-27 Thread Dan Kenigsberg

On Wed, Jul 27, 2016 at 09:25:25AM +0200, Simone Tiraboschi wrote:
> On Wed, Jul 27, 2016 at 8:12 AM, Roy Golan  wrote:
> > Edi, danken, this is again the malfunctioning heuristics in the client for
> > handling ipv6. Is there a bug on this issue ?
> 
> https://bugzilla.redhat.com/show_bug.cgi?id=1350883

Please try applying this patch
https://gerrit.ovirt.org/#/c/61363/4/lib/vdsm/vdscli.py
it would be included in ovirt-4.0.2, but we'd apreciate as wide testing
as possible.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-27 Thread Roy Golan

Edi, danken, this is again the malfunctioning heuristics in the client for
handling ipv6. Is there a bug on this issue ?

On Jul 27, 2016 8:57 AM,  wrote:

> I enabled ipv6 for "lo" and "ovirtmgmt" interfaces and deployment process
> overt completed successfully.
>
> # cat /etc/sysctl.conf
>
> net.ipv6.conf.all.disable_ipv6 = 1
> net.ipv6.conf.default.disable_ipv6 = 1
> net.ipv6.conf.lo.disable_ipv6 = 0
> net.ipv6.conf.ovirtmgmt.disable_ipv6 = 0
>
> Thank you for your Help!
>
> 26.07.2016, 09:13, "Edward Haas" :
>
>
>
> On Mon, Jul 25, 2016 at 4:02 PM, Simone Tiraboschi 
> wrote:
>
> On Mon, Jul 25, 2016 at 2:38 PM,   wrote:
> > telnet kom-ad01-vm31.holding.com 54321 = success connection
> >
> > telnet ::1 54321
> > Trying ::1...
> > telnet: connect to address ::1: Network is unreachable
> >
> > (ipv6 on my server disabled)
>
> Ok, so the issue seams here: now by default vdsm binds on :: and its
> heuristc can end up using ipv6.
> See this one: https://bugzilla.redhat.com/show_bug.cgi?id=1350883
>
> Can you please try enabling ipv6 on your host or setting
>  management_ip = 0.0.0.0
> under the [address] section in /etc/vdsm/vdsm.conf
> and then restarting vdsm.
>
>
>
> Could you please also add the 'ip addr' output? Just interested to see how
> IPv6 was
> disabled on the host.
> It will be even better if you could apply the patch (
> https://gerrit.ovirt.org/#/c/60020) and check.
>
>
>
>
>
> > 25.07.2016, 15:35, "Simone Tiraboschi" :
> >> On Mon, Jul 25, 2016 at 2:15 PM,  wrote:
> >>>  # ss -plutn
> >>>
> >>>  Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
> >>>
> >>>  udp UNCONN 0 0 *:111 *:* users:(("rpcbind",pid=827,fd=6))
> >>>  udp UNCONN 0 0 *:161 *:* users:(("snmpd",pid=1609,fd=6))
> >>>  udp UNCONN 0 0 127.0.0.1:323 *:* users:(("chronyd",pid=795,fd=1))
> >>>  udp UNCONN 0 0 *:959 *:* users:(("rpcbind",pid=827,fd=7))
> >>>  udp UNCONN 0 0 127.0.0.1:25375 *:* users:(("snmpd",pid=1609,fd=8))
> >>>  udp UNCONN 0 0 127.0.0.1:25376 *:* users:(("cmapeerd",pid=2056,fd=5))
> >>>  udp UNCONN 0 0 127.0.0.1:25393 *:* users:(("cmanicd",pid=2278,fd=3))
> >>>  udp UNCONN 0 0 :::111 :::* users:(("rpcbind",pid=827,fd=9))
> >>>  udp UNCONN 0 0 :::959 :::* users:(("rpcbind",pid=827,fd=10))
> >>>  tcp LISTEN 0 128 *:2381 *:*
> users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
> >>>  tcp LISTEN 0 128 *:111 *:* users:(("rpcbind",pid=827,fd=8))
> >>>  tcp LISTEN 0 5 *:54322 *:* users:(("ovirt-imageio-d",pid=753,fd=3))
> >>>  tcp LISTEN 0 128 *:22 *:* users:(("sshd",pid=1606,fd=3))
> >>>  tcp LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1948,fd=13))
> >>>  tcp LISTEN 0 128 *:2301 *:*
> users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
> >>>  tcp LISTEN 0 30 *:16514 *:* users:(("libvirtd",pid=10688,fd=13))
> >>>  tcp LISTEN 0 128 127.0.0.1:199 *:* users:(("snmpd",pid=1609,fd=9))
> >>>  tcp LISTEN 0 128 :::111 :::* users:(("rpcbind",pid=827,fd=11))
> >>>  tcp LISTEN 0 5 :::54321 :::* users:(("vdsm",pid=11077,fd=23))
> >>
> >> vdsm is properly bind over ipv6.
> >>
> >> Can you please check if you can connect to vdsm with:
> >>  telnet kom-ad01-vm31.holding.com 54321
> >> and with
> >>  telnet ::1 54321
> >> ?
> >>
> >>>  tcp LISTEN 0 30 :::16514 :::* users:(("libvirtd",pid=10688,fd=14))
> >>>
> >>>  25.07.2016, 15:11, "Simone Tiraboschi" :
>   On Mon, Jul 25, 2016 at 2:03 PM,  wrote:
> >   Yes.
> >
> >   # ping $(python -c 'import socket; print(socket.gethostname())')
> >
> >   PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
> >   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1
> ttl=64 time=0.030 ms
> >   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2
> ttl=64 time=0.015 ms
> >   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3
> ttl=64 time=0.011 ms
> >   ^C
> >   --- KOM-AD01-VM31.holding.com ping statistics ---
> >   3 packets transmitted, 3 received, 0% packet loss, time 2001ms
> >   rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
> >
> >   but...
> 
>   and the output of
>    ss -plutn
> 
> >   # vdsClient -s 0 getVdsCaps
> >
> >   Traceback (most recent call last):
> > File "/usr/share/vdsm/vdsClient.py", line 2980, in 
> >   code, message = commands[command][0](commandArgs)
> > File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
> >   return self.ExecAndExit(self.s.getVdsCapabilities())
> > File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
> >   return

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

telnet kom-ad01-vm31.holding.com 54321 = success connection

telnet ::1 54321
Trying ::1...
telnet: connect to address ::1: Network is unreachable
 
(ipv6 on my server disabled)

25.07.2016, 15:35, "Simone Tiraboschi" :
> On Mon, Jul 25, 2016 at 2:15 PM,  wrote:
>>  # ss -plutn
>>
>>  Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
>>
>>  udp UNCONN 0 0 *:111 *:* users:(("rpcbind",pid=827,fd=6))
>>  udp UNCONN 0 0 *:161 *:* users:(("snmpd",pid=1609,fd=6))
>>  udp UNCONN 0 0 127.0.0.1:323 *:* users:(("chronyd",pid=795,fd=1))
>>  udp UNCONN 0 0 *:959 *:* users:(("rpcbind",pid=827,fd=7))
>>  udp UNCONN 0 0 127.0.0.1:25375 *:* users:(("snmpd",pid=1609,fd=8))
>>  udp UNCONN 0 0 127.0.0.1:25376 *:* users:(("cmapeerd",pid=2056,fd=5))
>>  udp UNCONN 0 0 127.0.0.1:25393 *:* users:(("cmanicd",pid=2278,fd=3))
>>  udp UNCONN 0 0 :::111 :::* users:(("rpcbind",pid=827,fd=9))
>>  udp UNCONN 0 0 :::959 :::* users:(("rpcbind",pid=827,fd=10))
>>  tcp LISTEN 0 128 *:2381 *:* 
>> users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
>>  tcp LISTEN 0 128 *:111 *:* users:(("rpcbind",pid=827,fd=8))
>>  tcp LISTEN 0 5 *:54322 *:* users:(("ovirt-imageio-d",pid=753,fd=3))
>>  tcp LISTEN 0 128 *:22 *:* users:(("sshd",pid=1606,fd=3))
>>  tcp LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1948,fd=13))
>>  tcp LISTEN 0 128 *:2301 *:* 
>> users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
>>  tcp LISTEN 0 30 *:16514 *:* users:(("libvirtd",pid=10688,fd=13))
>>  tcp LISTEN 0 128 127.0.0.1:199 *:* users:(("snmpd",pid=1609,fd=9))
>>  tcp LISTEN 0 128 :::111 :::* users:(("rpcbind",pid=827,fd=11))
>>  tcp LISTEN 0 5 :::54321 :::* users:(("vdsm",pid=11077,fd=23))
>
> vdsm is properly bind over ipv6.
>
> Can you please check if you can connect to vdsm with:
>  telnet kom-ad01-vm31.holding.com 54321
> and with
>  telnet ::1 54321
> ?
>
>>  tcp LISTEN 0 30 :::16514 :::* users:(("libvirtd",pid=10688,fd=14))
>>
>>  25.07.2016, 15:11, "Simone Tiraboschi" :
>>>  On Mon, Jul 25, 2016 at 2:03 PM,  wrote:
   Yes.

   # ping $(python -c 'import socket; print(socket.gethostname())')

   PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 
 time=0.030 ms
   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 
 time=0.015 ms
   64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 
 time=0.011 ms
   ^C
   --- KOM-AD01-VM31.holding.com ping statistics ---
   3 packets transmitted, 3 received, 0% packet loss, time 2001ms
   rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms

   but...
>>>
>>>  and the output of
>>>   ss -plutn
>>>
   # vdsClient -s 0 getVdsCaps

   Traceback (most recent call last):
 File "/usr/share/vdsm/vdsClient.py", line 2980, in 
   code, message = commands[command][0](commandArgs)
 File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
   return self.ExecAndExit(self.s.getVdsCapabilities())
 File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
   return self.__send(self.__name, args)
 File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
   verbose=self.__verbose
 File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
   return self.single_request(host, handler, request_body, verbose)
 File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
   self.send_content(h, request_body)
 File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
   connection.endheaders(request_body)
 File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
   self._send_output(message_body)
 File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
   self.send(msg)
 File "/usr/lib64/python2.7/httplib.py", line 797, in send
   self.connect()
 File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
 connect
   sock = socket.create_connection((self.host, self.port), self.timeout)
 File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
   raise err
   error: [Errno 101] Network is unreachable

   25.07.2016, 14:58, "aleksey.maksi...@it-kb.ru" 
 :
>   Ok.
>
>   1) I stopped and disabled the service NetworkManager
>   # systemctl stop NetworkManager
>   # systemctl disable NetworkManager
>
>   2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in 
>

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 2:15 PM,   wrote:
> # ss -plutn
>
> Netid State  Recv-Q Send-Q
>Local Address:Port Peer Address:Port
>
> udp   UNCONN 0  0 
>*:111  
> *:*   
> users:(("rpcbind",pid=827,fd=6))
> udp   UNCONN 0  0 
>*:161  
> *:*   
> users:(("snmpd",pid=1609,fd=6))
> udp   UNCONN 0  0 
>127.0.0.1:323  
> *:*   
> users:(("chronyd",pid=795,fd=1))
> udp   UNCONN 0  0 
>*:959  
> *:*   
> users:(("rpcbind",pid=827,fd=7))
> udp   UNCONN 0  0 
>127.0.0.1:25375
> *:*   
> users:(("snmpd",pid=1609,fd=8))
> udp   UNCONN 0  0 
>127.0.0.1:25376
> *:*   
> users:(("cmapeerd",pid=2056,fd=5))
> udp   UNCONN 0  0 
>127.0.0.1:25393
> *:*   
> users:(("cmanicd",pid=2278,fd=3))
> udp   UNCONN 0  0 
>   :::111  
>:::*   
> users:(("rpcbind",pid=827,fd=9))
> udp   UNCONN 0  0 
>   :::959  
>:::*   
> users:(("rpcbind",pid=827,fd=10))
> tcp   LISTEN 0  128   
>*:2381 
> *:*   
> 
> users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
> tcp   LISTEN 0  128   
>*:111  
> *:*   
> users:(("rpcbind",pid=827,fd=8))
> tcp   LISTEN 0  5 
>*:54322
> *:*   
> users:(("ovirt-imageio-d",pid=753,fd=3))
> tcp   LISTEN 0  128   
>*:22   
> *:*   
> users:(("sshd",pid=1606,fd=3))
> tcp   LISTEN 0  100   
>127.0.0.1:25   
> *:*   
> users:(("master",pid=1948,fd=13))
> tcp   LISTEN 0  128   
>*:2301 
> *:*   
> 
> users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
> tcp   LISTEN 0  30
>*:16514
> *:*   
>

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

# ss -plutn

Netid State  Recv-Q Send-Q  
 Local Address:Port Peer Address:Port

udp   UNCONN 0  0   
 *:111  
*:*   
users:(("rpcbind",pid=827,fd=6))
udp   UNCONN 0  0   
 *:161  
*:*   
users:(("snmpd",pid=1609,fd=6))
udp   UNCONN 0  0   
 127.0.0.1:323  
*:*   
users:(("chronyd",pid=795,fd=1))
udp   UNCONN 0  0   
 *:959  
*:*   
users:(("rpcbind",pid=827,fd=7))
udp   UNCONN 0  0   
 127.0.0.1:25375
*:*   
users:(("snmpd",pid=1609,fd=8))
udp   UNCONN 0  0   
 127.0.0.1:25376
*:*   
users:(("cmapeerd",pid=2056,fd=5))
udp   UNCONN 0  0   
 127.0.0.1:25393
*:*   
users:(("cmanicd",pid=2278,fd=3))
udp   UNCONN 0  0   
:::111  
   :::*   
users:(("rpcbind",pid=827,fd=9))
udp   UNCONN 0  0   
:::959  
   :::*   
users:(("rpcbind",pid=827,fd=10))
tcp   LISTEN 0  128 
 *:2381 
*:*   
users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
tcp   LISTEN 0  128 
 *:111  
*:*   
users:(("rpcbind",pid=827,fd=8))
tcp   LISTEN 0  5   
 *:54322
*:*   
users:(("ovirt-imageio-d",pid=753,fd=3))
tcp   LISTEN 0  128 
 *:22   
*:*   
users:(("sshd",pid=1606,fd=3))
tcp   LISTEN 0  100 
 127.0.0.1:25   
*:*   
users:(("master",pid=1948,fd=13))
tcp   LISTEN 0  128 
 *:2301 
*:*   
users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
tcp   LISTEN 0  30  
 *:16514
*:*   
users:(("libvirtd",pid=10688,fd=13))
tcp   LISTEN 0  128 
 127.0.0.1:199

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 2:03 PM,   wrote:
> Yes.
>
> # ping $(python -c 'import socket; print(socket.gethostname())')
>
> PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 
> time=0.030 ms
> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 
> time=0.015 ms
> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 
> time=0.011 ms
> ^C
> --- KOM-AD01-VM31.holding.com ping statistics ---
> 3 packets transmitted, 3 received, 0% packet loss, time 2001ms
> rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
>
>
> but...

and the output of
 ss -plutn

> # vdsClient -s 0 getVdsCaps
>
> Traceback (most recent call last):
>   File "/usr/share/vdsm/vdsClient.py", line 2980, in 
> code, message = commands[command][0](commandArgs)
>   File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
> return self.ExecAndExit(self.s.getVdsCapabilities())
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
> return self.__send(self.__name, args)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
> verbose=self.__verbose
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
> return self.single_request(host, handler, request_body, verbose)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
> self.send_content(h, request_body)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
> connection.endheaders(request_body)
>   File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
> self._send_output(message_body)
>   File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
> self.send(msg)
>   File "/usr/lib64/python2.7/httplib.py", line 797, in send
> self.connect()
>   File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
> connect
> sock = socket.create_connection((self.host, self.port), self.timeout)
>   File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
> raise err
> error: [Errno 101] Network is unreachable
>
>
>
>
> 25.07.2016, 14:58, "aleksey.maksi...@it-kb.ru" :
>> Ok.
>>
>> 1) I stopped and disabled the service NetworkManager
>> # systemctl stop NetworkManager
>> # systemctl disable NetworkManager
>>
>> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in 
>> ifcfg-* file.
>>
>> 3) Reboot server
>>
>> 4) Try deploy oVirt HE 4 and I get the same error
>>
>> [ INFO ] Creating Volume Group
>> [ INFO ] Creating Storage Domain
>> [ INFO ] Creating Storage Pool
>> [ INFO ] Connecting Storage Pool
>> [ INFO ] Verifying sanlock lockspace initialization
>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network 
>> is unreachable
>> [ INFO ] Stage: Clean up
>> [ INFO ] Generating answer file 
>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, 
>> please check the issue, fix and redeploy
>>   Log file is located at 
>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>>
>> What ideas further?
>>
>> 25.07.2016, 13:06, "Simone Tiraboschi" :
>>>  On Mon, Jul 25, 2016 at 11:54 AM,  wrote:
   What am I supposed to do for successfully deploy ovirt 4 ?
   Any ideas ?
>>>
>>>  Can you please try to explicitly configure your DNS with nameserver
>>>  under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>>>  the interface you are going to use?
>>>
   25.07.2016, 12:47, "aleksey.maksi...@it-kb.ru" 
 :
>   "Aleksey, was your DNS configured with DNS1 and DNS2 just on the 
> interface you used to create the management bridge on?"
>
>   Yes. Of course
>
>   25.07.2016, 12:27, "Simone Tiraboschi" :
>>On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>> wrote:
>>> This could be the issue here as well as for BZ #1358530
>>>
>>> On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
 Could this be due to the fact that the ovirt installer has changed 
 network configuration files (ifcfg-*, resolv.conf) ?
 After the error in ovirt installation process I see from 
 resolv.conf disappeared on my DNS servers entry and now the server is 
 unable to resolve names.
>>
>>So it could be related to 
>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>
>>Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>interface you used to create the management bridge on?
>>Can you please try the workaround described here

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

Yes.

# ping $(python -c 'import socket; print(socket.gethostname())')

PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 
time=0.030 ms
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 
time=0.015 ms
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 
time=0.011 ms
^C
--- KOM-AD01-VM31.holding.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms


but...


# vdsClient -s 0 getVdsCaps

Traceback (most recent call last):
  File "/usr/share/vdsm/vdsClient.py", line 2980, in 
code, message = commands[command][0](commandArgs)
  File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
return self.ExecAndExit(self.s.getVdsCapabilities())
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
return self.__send(self.__name, args)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
verbose=self.__verbose
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
return self.single_request(host, handler, request_body, verbose)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
self.send_content(h, request_body)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
connection.endheaders(request_body)
  File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
self._send_output(message_body)
  File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
self.send(msg)
  File "/usr/lib64/python2.7/httplib.py", line 797, in send
self.connect()
  File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
sock = socket.create_connection((self.host, self.port), self.timeout)
  File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
raise err
error: [Errno 101] Network is unreachable




25.07.2016, 14:58, "aleksey.maksi...@it-kb.ru" :
> Ok.
>
> 1) I stopped and disabled the service NetworkManager
> # systemctl stop NetworkManager
> # systemctl disable NetworkManager
>
> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in 
> ifcfg-* file.
>
> 3) Reboot server
>
> 4) Try deploy oVirt HE 4 and I get the same error
>
> [ INFO ] Creating Volume Group
> [ INFO ] Creating Storage Domain
> [ INFO ] Creating Storage Pool
> [ INFO ] Connecting Storage Pool
> [ INFO ] Verifying sanlock lockspace initialization
> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network 
> is unreachable
> [ INFO ] Stage: Clean up
> [ INFO ] Generating answer file 
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, 
> please check the issue, fix and redeploy
>   Log file is located at 
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>
> What ideas further?
>
> 25.07.2016, 13:06, "Simone Tiraboschi" :
>>  On Mon, Jul 25, 2016 at 11:54 AM,  wrote:
>>>   What am I supposed to do for successfully deploy ovirt 4 ?
>>>   Any ideas ?
>>
>>  Can you please try to explicitly configure your DNS with nameserver
>>  under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>>  the interface you are going to use?
>>
>>>   25.07.2016, 12:47, "aleksey.maksi...@it-kb.ru" 
>>> :
   "Aleksey, was your DNS configured with DNS1 and DNS2 just on the 
 interface you used to create the management bridge on?"

   Yes. Of course

   25.07.2016, 12:27, "Simone Tiraboschi" :
>    On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>     wrote:
>> This could be the issue here as well as for BZ #1358530
>>
>> On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
>>> Could this be due to the fact that the ovirt installer has changed 
>>> network configuration files (ifcfg-*, resolv.conf) ?
>>> After the error in ovirt installation process I see from 
>>> resolv.conf disappeared on my DNS servers entry and now the server is 
>>> unable to resolve names.
>
>    So it could be related to 
> https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>
>    Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>    interface you used to create the management bridge on?
>    Can you please try the workaround described here
>    https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>
>>> 25.07.2016, 11:26, "Simone Tiraboschi" :
 On Mon, Jul 25, 2016 at 10:22 AM,  
 wrote:
>  #

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 1:46 PM,   wrote:
> Ok.
>
> 1) I stopped and disabled the service NetworkManager
> # systemctl stop NetworkManager
> # systemctl disable NetworkManager
>
> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in 
> ifcfg-* file.
>
> 3) Reboot server
>
> 4) Try deploy oVirt HE 4 and I get the same error
>
> [ INFO  ] Creating Volume Group
> [ INFO  ] Creating Storage Domain
> [ INFO  ] Creating Storage Pool
> [ INFO  ] Connecting Storage Pool
> [ INFO  ] Verifying sanlock lockspace initialization
> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network 
> is unreachable
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file 
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, 
> please check the issue, fix and redeploy
>   Log file is located at 
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>
>
> What ideas further?

Is your host hostname resolvable now?
Can you please check it with:
 ping $(python -c 'import socket; print(socket.gethostname())')

> 25.07.2016, 13:06, "Simone Tiraboschi" :
>> On Mon, Jul 25, 2016 at 11:54 AM,  wrote:
>>>  What am I supposed to do for successfully deploy ovirt 4 ?
>>>  Any ideas ?
>>
>> Can you please try to explicitly configure your DNS with nameserver
>> under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>> the interface you are going to use?
>>
>>>  25.07.2016, 12:47, "aleksey.maksi...@it-kb.ru" :
  "Aleksey, was your DNS configured with DNS1 and DNS2 just on the 
 interface you used to create the management bridge on?"

  Yes. Of course

  25.07.2016, 12:27, "Simone Tiraboschi" :
>   On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>    wrote:
>>This could be the issue here as well as for BZ #1358530
>>
>>On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
>>>Could this be due to the fact that the ovirt installer has changed 
>>> network configuration files (ifcfg-*, resolv.conf) ?
>>>After the error in ovirt installation process I see from resolv.conf 
>>> disappeared on my DNS servers entry and now the server is unable to 
>>> resolve names.
>
>   So it could be related to 
> https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>
>   Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>   interface you used to create the management bridge on?
>   Can you please try the workaround described here
>   https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>
>>>25.07.2016, 11:26, "Simone Tiraboschi" :
On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
> # vdsClient -s 0 getVdsCaps
>
> Traceback (most recent call last):
>   File "/usr/share/vdsm/vdsClient.py", line 2980, in 
> code, message = commands[command][0](commandArgs)
>   File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
> return self.ExecAndExit(self.s.getVdsCapabilities())
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
> return self.__send(self.__name, args)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in 
> __request
> verbose=self.__verbose
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
> return self.single_request(host, handler, request_body, 
> verbose)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in 
> single_request
> self.send_content(h, request_body)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in 
> send_content
> connection.endheaders(request_body)
>   File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
> self._send_output(message_body)
>   File "/usr/lib64/python2.7/httplib.py", line 835, in 
> _send_output
> self.send(msg)
>   File "/usr/lib64/python2.7/httplib.py", line 797, in send
> self.connect()
>   File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 
> 203, in connect
> sock = socket.create_connection((self.host, self.port), 
> self.timeout)
>   File "/usr/lib64/python2.7/socket.py", line 571, in 
> create_connection
> raise err
> error: [Errno 101] Network is unreachable

Yaniv,

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 11:54 AM,   wrote:
> What am I supposed to do for successfully deploy ovirt 4 ?
> Any ideas ?

Can you please try to explicitly configure your DNS with nameserver
under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
the interface you are going to use?

> 25.07.2016, 12:47, "aleksey.maksi...@it-kb.ru" :
>> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface 
>> you used to create the management bridge on?"
>>
>> Yes. Of course
>>
>> 25.07.2016, 12:27, "Simone Tiraboschi" :
>>>  On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>>   wrote:
   This could be the issue here as well as for BZ #1358530

   On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
>   Could this be due to the fact that the ovirt installer has changed 
> network configuration files (ifcfg-*, resolv.conf) ?
>   After the error in ovirt installation process I see from resolv.conf 
> disappeared on my DNS servers entry and now the server is unable to 
> resolve names.
>>>
>>>  So it could be related to 
>>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>>
>>>  Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>>  interface you used to create the management bridge on?
>>>  Can you please try the workaround described here
>>>  https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>>
>   25.07.2016, 11:26, "Simone Tiraboschi" :
>>   On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
>>># vdsClient -s 0 getVdsCaps
>>>
>>>Traceback (most recent call last):
>>>  File "/usr/share/vdsm/vdsClient.py", line 2980, in 
>>>code, message = commands[command][0](commandArgs)
>>>  File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>return self.ExecAndExit(self.s.getVdsCapabilities())
>>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>return self.__send(self.__name, args)
>>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>verbose=self.__verbose
>>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>return self.single_request(host, handler, request_body, verbose)
>>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in 
>>> single_request
>>>self.send_content(h, request_body)
>>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in 
>>> send_content
>>>connection.endheaders(request_body)
>>>  File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>self._send_output(message_body)
>>>  File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>self.send(msg)
>>>  File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>self.connect()
>>>  File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 
>>> 203, in connect
>>>sock = socket.create_connection((self.host, self.port), 
>>> self.timeout)
>>>  File "/usr/lib64/python2.7/socket.py", line 571, in 
>>> create_connection
>>>raise err
>>>error: [Errno 101] Network is unreachable
>>
>>   Yaniv, can you please take also a look to this one?
>>   it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>   Here the jsonrpcclient works but not the xmlrpc one.
>>
>>>25.07.2016, 11:17, "Simone Tiraboschi" :
On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
> Simone, there is something interesting in the vdsm.log?

For what I saw the issue is not related to the storage but to the 
 network.
ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere 
 and
this happens also when the setup asks to create the lockspace 
 volume.
It seams that in your case the xmlrpc client could not connect vdsm 
 on
the localhost.
It could be somehow related to:
https://bugzilla.redhat.com/1358530

Can you please try executing
 sudo vdsClient -s 0 getVdsCaps
on that host?

> 22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
> :
>> Simone, thanks for link.
>> vdsm.log attached
>>
>> 22.07.2016, 19:28, "Simone Tiraboschi" :
>>>  On Fri, Jul 22, 2016 at 5:59 PM,  
>>> wrote:
   Thank you for your response, Simone.

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

What am I supposed to do for successfully deploy ovirt 4 ?
Any ideas ?

25.07.2016, 12:47, "aleksey.maksi...@it-kb.ru" :
> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface 
> you used to create the management bridge on?"
>
> Yes. Of course
>
> 25.07.2016, 12:27, "Simone Tiraboschi" :
>>  On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>   wrote:
>>>   This could be the issue here as well as for BZ #1358530
>>>
>>>   On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
   Could this be due to the fact that the ovirt installer has changed 
 network configuration files (ifcfg-*, resolv.conf) ?
   After the error in ovirt installation process I see from resolv.conf 
 disappeared on my DNS servers entry and now the server is unable to 
 resolve names.
>>
>>  So it could be related to 
>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>
>>  Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>  interface you used to create the management bridge on?
>>  Can you please try the workaround described here
>>  https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>
   25.07.2016, 11:26, "Simone Tiraboschi" :
>   On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
>>    # vdsClient -s 0 getVdsCaps
>>
>>    Traceback (most recent call last):
>>  File "/usr/share/vdsm/vdsClient.py", line 2980, in 
>>    code, message = commands[command][0](commandArgs)
>>  File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>    return self.ExecAndExit(self.s.getVdsCapabilities())
>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>    return self.__send(self.__name, args)
>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>    verbose=self.__verbose
>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>    return self.single_request(host, handler, request_body, verbose)
>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in 
>> single_request
>>    self.send_content(h, request_body)
>>  File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>    connection.endheaders(request_body)
>>  File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>    self._send_output(message_body)
>>  File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>    self.send(msg)
>>  File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>    self.connect()
>>  File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, 
>> in connect
>>    sock = socket.create_connection((self.host, self.port), 
>> self.timeout)
>>  File "/usr/lib64/python2.7/socket.py", line 571, in 
>> create_connection
>>    raise err
>>    error: [Errno 101] Network is unreachable
>
>   Yaniv, can you please take also a look to this one?
>   it's exactly the opposite of https://bugzilla.redhat.com/1358530
>   Here the jsonrpcclient works but not the xmlrpc one.
>
>>    25.07.2016, 11:17, "Simone Tiraboschi" :
>>>    On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
 Simone, there is something interesting in the vdsm.log?
>>>
>>>    For what I saw the issue is not related to the storage but to the 
>>> network.
>>>    ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>    from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere 
>>> and
>>>    this happens also when the setup asks to create the lockspace volume.
>>>    It seams that in your case the xmlrpc client could not connect vdsm 
>>> on
>>>    the localhost.
>>>    It could be somehow related to:
>>>    https://bugzilla.redhat.com/1358530
>>>
>>>    Can you please try executing
>>> sudo vdsClient -s 0 getVdsCaps
>>>    on that host?
>>>
 22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
 :
> Simone, thanks for link.
> vdsm.log attached
>
> 22.07.2016, 19:28, "Simone Tiraboschi" :
>>  On Fri, Jul 22, 2016 at 5:59 PM,  
>> wrote:
>>>   Thank you for your response, Simone.
>>>
>>>   Log attached.
>>
>>  It seams it comes from VDSM, can you please attach also 
>> vdsm.log?
>>
>>>   I don't use ovirt-engine-appliance because I have not found 
>>> "how-to" for ovirt-engine-appliance deployment in hosted engine 
>>> configuration.
>>
>>  yum install

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

"Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface you 
used to create the management bridge on?"

Yes. Of course

25.07.2016, 12:27, "Simone Tiraboschi" :
> On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>  wrote:
>>  This could be the issue here as well as for BZ #1358530
>>
>>  On Mon, Jul 25, 2016 at 10:53 AM,  wrote:
>>>  Could this be due to the fact that the ovirt installer has changed network 
>>> configuration files (ifcfg-*, resolv.conf) ?
>>>  After the error in ovirt installation process I see from resolv.conf 
>>> disappeared on my DNS servers entry and now the server is unable to resolve 
>>> names.
>
> So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>
> Aleksey, was your DNS configured with DNS1 and DNS2 just on the
> interface you used to create the management bridge on?
> Can you please try the workaround described here
> https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>
>>>  25.07.2016, 11:26, "Simone Tiraboschi" :
  On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
>   # vdsClient -s 0 getVdsCaps
>
>   Traceback (most recent call last):
> File "/usr/share/vdsm/vdsClient.py", line 2980, in 
>   code, message = commands[command][0](commandArgs)
> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>   return self.ExecAndExit(self.s.getVdsCapabilities())
> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>   return self.__send(self.__name, args)
> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>   verbose=self.__verbose
> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>   return self.single_request(host, handler, request_body, verbose)
> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>   self.send_content(h, request_body)
> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>   connection.endheaders(request_body)
> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>   self._send_output(message_body)
> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>   self.send(msg)
> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>   self.connect()
> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, 
> in connect
>   sock = socket.create_connection((self.host, self.port), 
> self.timeout)
> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>   raise err
>   error: [Errno 101] Network is unreachable

  Yaniv, can you please take also a look to this one?
  it's exactly the opposite of https://bugzilla.redhat.com/1358530
  Here the jsonrpcclient works but not the xmlrpc one.

>   25.07.2016, 11:17, "Simone Tiraboschi" :
>>   On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
>>>    Simone, there is something interesting in the vdsm.log?
>>
>>   For what I saw the issue is not related to the storage but to the 
>> network.
>>   ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>   from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>   this happens also when the setup asks to create the lockspace volume.
>>   It seams that in your case the xmlrpc client could not connect vdsm on
>>   the localhost.
>>   It could be somehow related to:
>>   https://bugzilla.redhat.com/1358530
>>
>>   Can you please try executing
>>    sudo vdsClient -s 0 getVdsCaps
>>   on that host?
>>
>>>    22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
>>> :
    Simone, thanks for link.
    vdsm.log attached

    22.07.2016, 19:28, "Simone Tiraboschi" :
> On Fri, Jul 22, 2016 at 5:59 PM,  
> wrote:
>>  Thank you for your response, Simone.
>>
>>  Log attached.
>
> It seams it comes from VDSM, can you please attach also vdsm.log?
>
>>  I don't use ovirt-engine-appliance because I have not found 
>> "how-to" for ovirt-engine-appliance deployment in hosted engine 
>> configuration.
>
> yum install ovirt-engine-appliance
>
> Then follow the instruction here:
> 
> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>
>>  22.07.2016, 17:09, "Simone Tiraboschi" :
>>>  Hi Aleksey,
>>>  Can you please attach hosted-engine-setup logs?

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
 wrote:
> This could be the issue here as well as for BZ #1358530
>
> On Mon, Jul 25, 2016 at 10:53 AM,   wrote:
>> Could this be due to the fact that the ovirt installer has changed network 
>> configuration files (ifcfg-*, resolv.conf) ?
>> After the error in ovirt installation process I see from resolv.conf 
>> disappeared on my DNS servers entry and now the server is unable to resolve 
>> names.

So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423

Aleksey, was your DNS configured with DNS1 and DNS2 just on the
interface you used to create the management bridge on?
Can you please try the workaround described here
https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?



>> 25.07.2016, 11:26, "Simone Tiraboschi" :
>>> On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
  # vdsClient -s 0 getVdsCaps

  Traceback (most recent call last):
File "/usr/share/vdsm/vdsClient.py", line 2980, in 
  code, message = commands[command][0](commandArgs)
File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
  return self.ExecAndExit(self.s.getVdsCapabilities())
File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
  return self.__send(self.__name, args)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
  verbose=self.__verbose
File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
  return self.single_request(host, handler, request_body, verbose)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
  self.send_content(h, request_body)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
  connection.endheaders(request_body)
File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
  self._send_output(message_body)
File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
  self.send(msg)
File "/usr/lib64/python2.7/httplib.py", line 797, in send
  self.connect()
File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
 connect
  sock = socket.create_connection((self.host, self.port), self.timeout)
File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
  raise err
  error: [Errno 101] Network is unreachable
>>>
>>> Yaniv, can you please take also a look to this one?
>>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>> Here the jsonrpcclient works but not the xmlrpc one.
>>>
  25.07.2016, 11:17, "Simone Tiraboschi" :
>  On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
>>   Simone, there is something interesting in the vdsm.log?
>
>  For what I saw the issue is not related to the storage but to the 
> network.
>  ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>  from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>  this happens also when the setup asks to create the lockspace volume.
>  It seams that in your case the xmlrpc client could not connect vdsm on
>  the localhost.
>  It could be somehow related to:
>  https://bugzilla.redhat.com/1358530
>
>  Can you please try executing
>   sudo vdsClient -s 0 getVdsCaps
>  on that host?
>
>>   22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
>> :
>>>   Simone, thanks for link.
>>>   vdsm.log attached
>>>
>>>   22.07.2016, 19:28, "Simone Tiraboschi" :
On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
> Thank you for your response, Simone.
>
> Log attached.

It seams it comes from VDSM, can you please attach also vdsm.log?

> I don't use ovirt-engine-appliance because I have not found 
> "how-to" for ovirt-engine-appliance deployment in hosted engine 
> configuration.

yum install ovirt-engine-appliance

Then follow the instruction here:

 http://www.ovirt.org/develop/release-management/features/heapplianceflow/

> 22.07.2016, 17:09, "Simone Tiraboschi" :
>> Hi Aleksey,
>> Can you please attach hosted-engine-setup logs?
>>
>> On Fri, Jul 22, 2016 at 3:46 PM,  
>> wrote:
>>
>>>  Hello oVirt guru`s !
>>>
>>>  I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>
>>>  My environment :
>>>  
>>>  * Two servers HP ProLiant DL 360 G5

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Piotr Kliczewski

This could be the issue here as well as for BZ #1358530

On Mon, Jul 25, 2016 at 10:53 AM,   wrote:
> Could this be due to the fact that the ovirt installer has changed network 
> configuration files (ifcfg-*, resolv.conf) ?
> After the error in ovirt installation process I see from resolv.conf 
> disappeared on my DNS servers entry and now the server is unable to resolve 
> names.
>
> 25.07.2016, 11:26, "Simone Tiraboschi" :
>> On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
>>>  # vdsClient -s 0 getVdsCaps
>>>
>>>  Traceback (most recent call last):
>>>File "/usr/share/vdsm/vdsClient.py", line 2980, in 
>>>  code, message = commands[command][0](commandArgs)
>>>File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>  return self.ExecAndExit(self.s.getVdsCapabilities())
>>>File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>  return self.__send(self.__name, args)
>>>File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>  verbose=self.__verbose
>>>File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>  return self.single_request(host, handler, request_body, verbose)
>>>File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>  self.send_content(h, request_body)
>>>File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>  connection.endheaders(request_body)
>>>File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>  self._send_output(message_body)
>>>File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>  self.send(msg)
>>>File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>  self.connect()
>>>File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
>>> connect
>>>  sock = socket.create_connection((self.host, self.port), self.timeout)
>>>File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>  raise err
>>>  error: [Errno 101] Network is unreachable
>>
>> Yaniv, can you please take also a look to this one?
>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>> Here the jsonrpcclient works but not the xmlrpc one.
>>
>>>  25.07.2016, 11:17, "Simone Tiraboschi" :
  On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
>   Simone, there is something interesting in the vdsm.log?

  For what I saw the issue is not related to the storage but to the network.
  ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
  from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
  this happens also when the setup asks to create the lockspace volume.
  It seams that in your case the xmlrpc client could not connect vdsm on
  the localhost.
  It could be somehow related to:
  https://bugzilla.redhat.com/1358530

  Can you please try executing
   sudo vdsClient -s 0 getVdsCaps
  on that host?

>   22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
> :
>>   Simone, thanks for link.
>>   vdsm.log attached
>>
>>   22.07.2016, 19:28, "Simone Tiraboschi" :
>>>On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
 Thank you for your response, Simone.

 Log attached.
>>>
>>>It seams it comes from VDSM, can you please attach also vdsm.log?
>>>
 I don't use ovirt-engine-appliance because I have not found 
 "how-to" for ovirt-engine-appliance deployment in hosted engine 
 configuration.
>>>
>>>yum install ovirt-engine-appliance
>>>
>>>Then follow the instruction here:
>>>
>>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>>
 22.07.2016, 17:09, "Simone Tiraboschi" :
> Hi Aleksey,
> Can you please attach hosted-engine-setup logs?
>
> On Fri, Jul 22, 2016 at 3:46 PM,  
> wrote:
>
>>  Hello oVirt guru`s !
>>
>>  I have problem with initial deploy of ovirt 4.0 hosted engine.
>>
>>  My environment :
>>  
>>  * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA 
>> connected (with
>>  multipathd) to storage HP 3PAR 7200
>>  * On each server installed CentOS 7.2 Linux 
>> (3.10.0-327.22.2.el7.x86_64)
>>  * On 3PAR storage I created 2 LUNs for oVirt.
>>  - First LUN for oVirt Hosted Engine VM (60GB)
>>  - Second LUN for all other VMs (2TB)
>>
>>  # multipath -ll
>>
>>  3par-vv1 (360002ac0001bcec9) dm-0

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

Could this be due to the fact that the ovirt installer has changed network 
configuration files (ifcfg-*, resolv.conf) ?
After the error in ovirt installation process I see from resolv.conf 
disappeared on my DNS servers entry and now the server is unable to resolve 
names.

25.07.2016, 11:26, "Simone Tiraboschi" :
> On Mon, Jul 25, 2016 at 10:22 AM,  wrote:
>>  # vdsClient -s 0 getVdsCaps
>>
>>  Traceback (most recent call last):
>>    File "/usr/share/vdsm/vdsClient.py", line 2980, in 
>>  code, message = commands[command][0](commandArgs)
>>    File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>  return self.ExecAndExit(self.s.getVdsCapabilities())
>>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>  return self.__send(self.__name, args)
>>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>  verbose=self.__verbose
>>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>  return self.single_request(host, handler, request_body, verbose)
>>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>  self.send_content(h, request_body)
>>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>  connection.endheaders(request_body)
>>    File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>  self._send_output(message_body)
>>    File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>  self.send(msg)
>>    File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>  self.connect()
>>    File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
>> connect
>>  sock = socket.create_connection((self.host, self.port), self.timeout)
>>    File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>  raise err
>>  error: [Errno 101] Network is unreachable
>
> Yaniv, can you please take also a look to this one?
> it's exactly the opposite of https://bugzilla.redhat.com/1358530
> Here the jsonrpcclient works but not the xmlrpc one.
>
>>  25.07.2016, 11:17, "Simone Tiraboschi" :
>>>  On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
   Simone, there is something interesting in the vdsm.log?
>>>
>>>  For what I saw the issue is not related to the storage but to the network.
>>>  ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>  from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>>  this happens also when the setup asks to create the lockspace volume.
>>>  It seams that in your case the xmlrpc client could not connect vdsm on
>>>  the localhost.
>>>  It could be somehow related to:
>>>  https://bugzilla.redhat.com/1358530
>>>
>>>  Can you please try executing
>>>   sudo vdsClient -s 0 getVdsCaps
>>>  on that host?
>>>
   22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" 
 :
>   Simone, thanks for link.
>   vdsm.log attached
>
>   22.07.2016, 19:28, "Simone Tiraboschi" :
>>    On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
>>> Thank you for your response, Simone.
>>>
>>> Log attached.
>>
>>    It seams it comes from VDSM, can you please attach also vdsm.log?
>>
>>> I don't use ovirt-engine-appliance because I have not found 
>>> "how-to" for ovirt-engine-appliance deployment in hosted engine 
>>> configuration.
>>
>>    yum install ovirt-engine-appliance
>>
>>    Then follow the instruction here:
>>    
>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>
>>> 22.07.2016, 17:09, "Simone Tiraboschi" :
 Hi Aleksey,
 Can you please attach hosted-engine-setup logs?

 On Fri, Jul 22, 2016 at 3:46 PM,  wrote:

>  Hello oVirt guru`s !
>
>  I have problem with initial deploy of ovirt 4.0 hosted engine.
>
>  My environment :
>  
>  * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected 
> (with
>  multipathd) to storage HP 3PAR 7200
>  * On each server installed CentOS 7.2 Linux 
> (3.10.0-327.22.2.el7.x86_64)
>  * On 3PAR storage I created 2 LUNs for oVirt.
>  - First LUN for oVirt Hosted Engine VM (60GB)
>  - Second LUN for all other VMs (2TB)
>
>  # multipath -ll
>
>  3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VV
>  size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>  `-+- policy='round-robin 0' prio=50 status=active
>    |- 2:0:1:1 sdd 8:48 active ready running
>    |- 3:0:0:1 sdf 8:80 active

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread Simone Tiraboschi

On Mon, Jul 25, 2016 at 10:22 AM,   wrote:
> # vdsClient -s 0 getVdsCaps
>
> Traceback (most recent call last):
>   File "/usr/share/vdsm/vdsClient.py", line 2980, in 
> code, message = commands[command][0](commandArgs)
>   File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
> return self.ExecAndExit(self.s.getVdsCapabilities())
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
> return self.__send(self.__name, args)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
> verbose=self.__verbose
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
> return self.single_request(host, handler, request_body, verbose)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
> self.send_content(h, request_body)
>   File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
> connection.endheaders(request_body)
>   File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
> self._send_output(message_body)
>   File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
> self.send(msg)
>   File "/usr/lib64/python2.7/httplib.py", line 797, in send
> self.connect()
>   File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in 
> connect
> sock = socket.create_connection((self.host, self.port), self.timeout)
>   File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
> raise err
> error: [Errno 101] Network is unreachable

Yaniv, can you please take also a look to this one?
it's exactly the opposite of https://bugzilla.redhat.com/1358530
Here the jsonrpcclient works but not the xmlrpc one.

> 25.07.2016, 11:17, "Simone Tiraboschi" :
>> On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
>>>  Simone, there is something interesting in the vdsm.log?
>>
>> For what I saw the issue is not related to the storage but to the network.
>> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>> this happens also when the setup asks to create the lockspace volume.
>> It seams that in your case the xmlrpc client could not connect vdsm on
>> the localhost.
>> It could be somehow related to:
>> https://bugzilla.redhat.com/1358530
>>
>> Can you please try executing
>>  sudo vdsClient -s 0 getVdsCaps
>> on that host?
>>
>>>  22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" :
  Simone, thanks for link.
  vdsm.log attached

  22.07.2016, 19:28, "Simone Tiraboschi" :
>   On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
>>Thank you for your response, Simone.
>>
>>Log attached.
>
>   It seams it comes from VDSM, can you please attach also vdsm.log?
>
>>I don't use ovirt-engine-appliance because I have not found "how-to" 
>> for ovirt-engine-appliance deployment in hosted engine configuration.
>
>   yum install ovirt-engine-appliance
>
>   Then follow the instruction here:
>   
> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>
>>22.07.2016, 17:09, "Simone Tiraboschi" :
>>>Hi Aleksey,
>>>Can you please attach hosted-engine-setup logs?
>>>
>>>On Fri, Jul 22, 2016 at 3:46 PM,  wrote:
>>>
 Hello oVirt guru`s !

 I have problem with initial deploy of ovirt 4.0 hosted engine.

 My environment :
 
 * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected 
 (with
 multipathd) to storage HP 3PAR 7200
 * On each server installed CentOS 7.2 Linux 
 (3.10.0-327.22.2.el7.x86_64)
 * On 3PAR storage I created 2 LUNs for oVirt.
 - First LUN for oVirt Hosted Engine VM (60GB)
 - Second LUN for all other VMs (2TB)

 # multipath -ll

 3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VV
 size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
 `-+- policy='round-robin 0' prio=50 status=active
   |- 2:0:1:1 sdd 8:48 active ready running
   |- 3:0:0:1 sdf 8:80 active ready running
   |- 2:0:0:1 sdb 8:16 active ready running
   `- 3:0:1:1 sdh 8:112 active ready running

 3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VV
 size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
 `-+- policy='round-robin 0' prio=50 status=active
   |- 2:0:0:0 sda 8:0 active ready running
   |- 3:0:0:0 sde 8:64 active ready running
   |- 2:0:1:0 sdc 8:32 active ready running

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

# vdsClient -s 0 getVdsCaps

Traceback (most recent call last):
  File "/usr/share/vdsm/vdsClient.py", line 2980, in 
code, message = commands[command][0](commandArgs)
  File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
return self.ExecAndExit(self.s.getVdsCapabilities())
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
return self.__send(self.__name, args)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
verbose=self.__verbose
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
return self.single_request(host, handler, request_body, verbose)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
self.send_content(h, request_body)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
connection.endheaders(request_body)
  File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
self._send_output(message_body)
  File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
self.send(msg)
  File "/usr/lib64/python2.7/httplib.py", line 797, in send
self.connect()
  File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
sock = socket.create_connection((self.host, self.port), self.timeout)
  File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
raise err
error: [Errno 101] Network is unreachable


25.07.2016, 11:17, "Simone Tiraboschi" :
> On Mon, Jul 25, 2016 at 7:51 AM,  wrote:
>>  Simone, there is something interesting in the vdsm.log?
>
> For what I saw the issue is not related to the storage but to the network.
> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
> this happens also when the setup asks to create the lockspace volume.
> It seams that in your case the xmlrpc client could not connect vdsm on
> the localhost.
> It could be somehow related to:
> https://bugzilla.redhat.com/1358530
>
> Can you please try executing
>  sudo vdsClient -s 0 getVdsCaps
> on that host?
>
>>  22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" :
>>>  Simone, thanks for link.
>>>  vdsm.log attached
>>>
>>>  22.07.2016, 19:28, "Simone Tiraboschi" :
   On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
>    Thank you for your response, Simone.
>
>    Log attached.

   It seams it comes from VDSM, can you please attach also vdsm.log?

>    I don't use ovirt-engine-appliance because I have not found "how-to" 
> for ovirt-engine-appliance deployment in hosted engine configuration.

   yum install ovirt-engine-appliance

   Then follow the instruction here:
   http://www.ovirt.org/develop/release-management/features/heapplianceflow/

>    22.07.2016, 17:09, "Simone Tiraboschi" :
>>    Hi Aleksey,
>>    Can you please attach hosted-engine-setup logs?
>>
>>    On Fri, Jul 22, 2016 at 3:46 PM,  wrote:
>>
>>> Hello oVirt guru`s !
>>>
>>> I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>
>>> My environment :
>>> 
>>> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected 
>>> (with
>>> multipathd) to storage HP 3PAR 7200
>>> * On each server installed CentOS 7.2 Linux 
>>> (3.10.0-327.22.2.el7.x86_64)
>>> * On 3PAR storage I created 2 LUNs for oVirt.
>>> - First LUN for oVirt Hosted Engine VM (60GB)
>>> - Second LUN for all other VMs (2TB)
>>>
>>> # multipath -ll
>>>
>>> 3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VV
>>> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>> `-+- policy='round-robin 0' prio=50 status=active
>>>   |- 2:0:1:1 sdd 8:48 active ready running
>>>   |- 3:0:0:1 sdf 8:80 active ready running
>>>   |- 2:0:0:1 sdb 8:16 active ready running
>>>   `- 3:0:1:1 sdh 8:112 active ready running
>>>
>>> 3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VV
>>> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>> `-+- policy='round-robin 0' prio=50 status=active
>>>   |- 2:0:0:0 sda 8:0 active ready running
>>>   |- 3:0:0:0 sde 8:64 active ready running
>>>   |- 2:0:1:0 sdc 8:32 active ready running
>>>   `- 3:0:1:0 sdg 8:96 active ready running
>>>
>>> My steps on first server (initial deploy of ovirt 4.0 hosted 
>>> engine):
>>> 
>>>
>>> # systemctl stop NetworkManager
>>> # systemctl disable NetworkManager
>>> # yum -y install 
>>>

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-25 Thread aleksey . maksimov

Simone, there is something interesting in the vdsm.log?

22.07.2016, 19:36, "aleksey.maksi...@it-kb.ru" :
> Simone, thanks for link.
> vdsm.log attached
>
> 22.07.2016, 19:28, "Simone Tiraboschi" :
>>  On Fri, Jul 22, 2016 at 5:59 PM,  wrote:
>>>   Thank you for your response, Simone.
>>>
>>>   Log attached.
>>
>>  It seams it comes from VDSM, can you please attach also vdsm.log?
>>
>>>   I don't use ovirt-engine-appliance because I have not found "how-to" for 
>>> ovirt-engine-appliance deployment in hosted engine configuration.
>>
>>  yum install ovirt-engine-appliance
>>
>>  Then follow the instruction here:
>>  http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>
>>>   22.07.2016, 17:09, "Simone Tiraboschi" :
   Hi Aleksey,
   Can you please attach hosted-engine-setup logs?

   On Fri, Jul 22, 2016 at 3:46 PM,  wrote:

>    Hello oVirt guru`s !
>
>    I have problem with initial deploy of ovirt 4.0 hosted engine.
>
>    My environment :
>    
>    * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
>    multipathd) to storage HP 3PAR 7200
>    * On each server installed CentOS 7.2 Linux 
> (3.10.0-327.22.2.el7.x86_64)
>    * On 3PAR storage I created 2 LUNs for oVirt.
>    - First LUN for oVirt Hosted Engine VM (60GB)
>    - Second LUN for all other VMs (2TB)
>
>    # multipath -ll
>
>    3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VV
>    size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>    `-+- policy='round-robin 0' prio=50 status=active
>  |- 2:0:1:1 sdd 8:48 active ready running
>  |- 3:0:0:1 sdf 8:80 active ready running
>  |- 2:0:0:1 sdb 8:16 active ready running
>  `- 3:0:1:1 sdh 8:112 active ready running
>
>    3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VV
>    size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>    `-+- policy='round-robin 0' prio=50 status=active
>  |- 2:0:0:0 sda 8:0 active ready running
>  |- 3:0:0:0 sde 8:64 active ready running
>  |- 2:0:1:0 sdc 8:32 active ready running
>  `- 3:0:1:0 sdg 8:96 active ready running
>
>    My steps on first server (initial deploy of ovirt 4.0 hosted engine):
>    
>
>    # systemctl stop NetworkManager
>    # systemctl disable NetworkManager
>    # yum -y install 
> http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>    # yum -y install epel-release
>    # wget
>    
> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
>    -P /tmp/
>    # yum install ovirt-hosted-engine-setup
>    # yum install screen
>    # screen -RD
>
>    ...in screen session :
>
>    # hosted-engine --deploy
>
>    ...
>    in configuration process I chose "fc" as storage type for oVirt hosted
>    engine vm and select 60GB LUN...
>    ...
>
>    --== CONFIGURATION PREVIEW ==--
>
>    ...
>  Firewall manager : iptables
>  Gateway address : 10.1.0.1
>  Host name for web application : KOM-AD01-OVIRT1
>  Storage Domain type : fc
>  Host ID : 1
>  LUN ID :
>    360002ac0001bcec9
>  Image size GB : 40
>  Console type : vnc
>  Memory size MB : 4096
>  MAC address : 00:16:3e:77:1d:07
>  Boot type : cdrom
>  Number of CPUs : 2
>  ISO image (cdrom boot/cloud-init) :
>    /tmp/CentOS-7-x86_64-NetInstall-1511.iso

   Can I ask why you prefer/need to manually create a VM installing from
   a CD instead of using the ready-to-use ovirt-engine-appliance?
   Using the appliance makes the setup process a lot shorted and more 
 comfortable.

>  CPU Type : model_Penryn
>    ...
>    and get error after step "Verifying sanlock lockspace initialization"
>    ...
>
>    [ INFO ] Verifying sanlock lockspace initialization
>    [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] 
> Network
>    is unreachable
>    [ INFO ] Stage: Clean up
>    [ INFO ] Generating answer file
>    
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
>    [ INFO ] Stage: Pre-termination
>    [ INFO ] Stage: Termination
>    [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>    please check the issue, fix and redeploy
>  Log file is located at
>    
>

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-24 Thread aleksey . maksimov

Hello oVirt guru`s !I have problem with initial deploy of ovirt 4.0 hosted engine.My environment :* Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with multipathd) to storage HP 3PAR 7200* On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)* On 3PAR storage I created 2 LUNs for oVirt.- First LUN for oVirt Hosted Engine VM (60GB)- Second LUN for all other VMs (2TB)# multipath -ll3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VVsize=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:1:1 sdd 8:48  active ready running  |- 3:0:0:1 sdf 8:80  active ready running  |- 2:0:0:1 sdb 8:16  active ready running  `- 3:0:1:1 sdh 8:112 active ready running3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VVsize=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:0:0 sda 8:0   active ready running  |- 3:0:0:0 sde 8:64  active ready running  |- 2:0:1:0 sdc 8:32  active ready running  `- 3:0:1:0 sdg 8:96  active ready running My steps on first server (initial deploy of ovirt 4.0 hosted engine):# systemctl stop NetworkManager# systemctl disable NetworkManager# yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm# yum -y install epel-release# wget http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso -P /tmp/# yum install ovirt-hosted-engine-setup# yum install screen# screen -RD...in screen session :# hosted-engine --deploy...in configuration process I chose "fc" as storage type for oVirt hosted engine vm and select 60GB LUN..--== CONFIGURATION PREVIEW ==--...  Firewall manager   : iptables  Gateway address    : 10.1.0.1  Host name for web application  : KOM-AD01-OVIRT1  Storage Domain type    : fc  Host ID    : 1  LUN ID : 360002ac0001bcec9  Image size GB  : 40  Console type   : vnc  Memory size MB : 4096  MAC address    : 00:16:3e:77:1d:07  Boot type  : cdrom  Number of CPUs : 2  ISO image (cdrom boot/cloud-init)  : /tmp/CentOS-7-x86_64-NetInstall-1511.iso  CPU Type   : model_Penryn...and get error after step "Verifying sanlock lockspace initialization"...[ INFO  ] Verifying sanlock lockspace initialization[ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable[ INFO  ] Stage: Clean up[ INFO  ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'[ INFO  ] Stage: Pre-termination[ INFO  ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy  Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.logInterestinglyIf I try to deploy hosted-engine v3.6, everything goes well in the same configuration !! :[ INFO  ] Stage: Transaction setup[ INFO  ] Stage: Misc configuration[ INFO  ] Stage: Package installation[ INFO  ] Stage: Misc configuration[ INFO  ] Configuring libvirt[ INFO  ] Configuring VDSM[ INFO  ] Starting vdsmd[ INFO  ] Waiting for VDSM hardware info[ INFO  ] Configuring the management bridge[ INFO  ] Creating Volume Group[ INFO  ] Creating Storage Domain[ INFO  ] Creating Storage Pool[ INFO  ] Connecting Storage Pool[ INFO  ] Verifying sanlock lockspace initialization[ INFO  ] Creating Image for 'hosted-engine.lockspace' ...[ INFO  ] Image for 'hosted-engine.lockspace' created successfully[ INFO  ] Creating Image for 'hosted-engine.metadata' ...[ INFO  ] Image for 'hosted-engine.metadata' created successfully[ INFO  ] Creating VM Image[ INFO  ] Destroying Storage Pool[ INFO  ] Start monitoring domain[ INFO  ] Configuring VM[ INFO  ] Updating hosted-engine configuration[ INFO  ] Stage: Transaction commit[ INFO  ] Stage: Closing up[ INFO  ] Creating VM  You can now connect to the VM with the following command:    /bin/remote-viewer vnc://localhost:5900...What could be the problem?___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-22 Thread Simone Tiraboschi

Hi Aleksey,
Can you please attach hosted-engine-setup logs?

On Fri, Jul 22, 2016 at 3:46 PM,   wrote:
>
> Hello oVirt guru`s !
>
> I have problem with initial deploy of ovirt 4.0 hosted engine.
>
> My environment :
> 
> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
> multipathd) to storage HP 3PAR 7200
> * On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)
> * On 3PAR storage I created 2 LUNs for oVirt.
> - First LUN for oVirt Hosted Engine VM (60GB)
> - Second LUN for all other VMs (2TB)
>
> # multipath -ll
>
> 3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VV
> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
> `-+- policy='round-robin 0' prio=50 status=active
>   |- 2:0:1:1 sdd 8:48  active ready running
>   |- 3:0:0:1 sdf 8:80  active ready running
>   |- 2:0:0:1 sdb 8:16  active ready running
>   `- 3:0:1:1 sdh 8:112 active ready running
>
> 3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VV
> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
> `-+- policy='round-robin 0' prio=50 status=active
>   |- 2:0:0:0 sda 8:0   active ready running
>   |- 3:0:0:0 sde 8:64  active ready running
>   |- 2:0:1:0 sdc 8:32  active ready running
>   `- 3:0:1:0 sdg 8:96  active ready running
>
>
>
> My steps on first server (initial deploy of ovirt 4.0 hosted engine):
> 
>
> # systemctl stop NetworkManager
> # systemctl disable NetworkManager
> # yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
> # yum -y install epel-release
> # wget
> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
> -P /tmp/
> # yum install ovirt-hosted-engine-setup
> # yum install screen
> # screen -RD
>
> ...in screen session :
>
> # hosted-engine --deploy
>
> ...
> in configuration process I chose "fc" as storage type for oVirt hosted
> engine vm and select 60GB LUN...
> ...
>
> --== CONFIGURATION PREVIEW ==--
>
> ...
>   Firewall manager   : iptables
>   Gateway address: 10.1.0.1
>   Host name for web application  : KOM-AD01-OVIRT1
>   Storage Domain type: fc
>   Host ID: 1
>   LUN ID :
> 360002ac0001bcec9
>   Image size GB  : 40
>   Console type   : vnc
>   Memory size MB : 4096
>   MAC address: 00:16:3e:77:1d:07
>   Boot type  : cdrom
>   Number of CPUs : 2
>   ISO image (cdrom boot/cloud-init)  :
> /tmp/CentOS-7-x86_64-NetInstall-1511.iso

Can I ask why you prefer/need to manually create a VM installing from
a CD instead of using the ready-to-use ovirt-engine-appliance?
Using the appliance makes the setup process a lot shorted and more comfortable.

>   CPU Type   : model_Penryn
> ...
> and get error after step "Verifying sanlock lockspace initialization"
> ...
>
> [ INFO  ] Verifying sanlock lockspace initialization
> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network
> is unreachable
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
> please check the issue, fix and redeploy
>   Log file is located at
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log
>
>
> Interestingly
> 
> If I try to deploy hosted-engine v3.6, everything goes well in the same
> configuration !! :
>
> 
> [ INFO  ] Stage: Transaction setup
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Stage: Package installation
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Configuring libvirt
> [ INFO  ] Configuring VDSM
> [ INFO  ] Starting vdsmd
> [ INFO  ] Waiting for VDSM hardware info
> [ INFO  ] Configuring the management bridge
> [ INFO  ] Creating Volume Group
> [ INFO  ] Creating Storage Domain
> [ INFO  ] Creating Storage Pool
> [ INFO  ] Connecting Storage Pool
> [ INFO  ] Verifying sanlock lockspace initialization
> [ INFO  ] Creating Image for 'hosted-engine.lockspace' ...
> [ INFO  ] Image for 'hosted-engine.lockspace' created successfully
> [ INFO  ] Creating Image for 'hosted-engine.metadata' ...
> [ INFO  ] Image for 'hosted-engine.metadata' created successfully
> [ INFO  ] Creating VM Image
> [ INFO  ] Destroying Storage Pool
> [ INFO  ] Start monitoring domain
> [ INFO  ] Configuring VM
> [ INFO  ] Updating hosted-engine configuration
> [ INFO  ] Stage: Transaction commit
> [ INFO  ] Stage: Closing up
> [ INFO  ]

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-22 Thread aleksey . maksimov

Hello oVirt guru`s ! I have problem with initial deploy of ovirt 4.0 hosted engine. My environment :* Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with multipathd) to storage HP 3PAR 7200* On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)* On 3PAR storage I created 2 LUNs for oVirt.- First LUN for oVirt Hosted Engine VM (60GB)- Second LUN for all other VMs (2TB) # multipath -ll 3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VVsize=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:1:1 sdd 8:48  active ready running  |- 3:0:0:1 sdf 8:80  active ready running  |- 2:0:0:1 sdb 8:16  active ready running  `- 3:0:1:1 sdh 8:112 active ready running 3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VVsize=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:0:0 sda 8:0   active ready running  |- 3:0:0:0 sde 8:64  active ready running  |- 2:0:1:0 sdc 8:32  active ready running  `- 3:0:1:0 sdg 8:96  active ready running   My steps on first server (initial deploy of ovirt 4.0 hosted engine): # systemctl stop NetworkManager# systemctl disable NetworkManager# yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm# yum -y install epel-release# wget http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso -P /tmp/# yum install ovirt-hosted-engine-setup# yum install screen# screen -RD ...in screen session : # hosted-engine --deploy ...in configuration process I chose "fc" as storage type for oVirt hosted engine vm and select 60GB LUN.. --== CONFIGURATION PREVIEW ==-- ...  Firewall manager   : iptables  Gateway address    : 10.1.0.1  Host name for web application  : KOM-AD01-OVIRT1  Storage Domain type    : fc  Host ID    : 1  LUN ID : 360002ac0001bcec9  Image size GB  : 40  Console type   : vnc  Memory size MB : 4096  MAC address    : 00:16:3e:77:1d:07  Boot type  : cdrom  Number of CPUs : 2  ISO image (cdrom boot/cloud-init)  : /tmp/CentOS-7-x86_64-NetInstall-1511.iso  CPU Type   : model_Penryn...and get error after step "Verifying sanlock lockspace initialization"... [ INFO  ] Verifying sanlock lockspace initialization[ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable[ INFO  ] Stage: Clean up[ INFO  ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'[ INFO  ] Stage: Pre-termination[ INFO  ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy  Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log  InterestinglyIf I try to deploy hosted-engine v3.6, everything goes well in the same configuration !! : [ INFO  ] Stage: Transaction setup[ INFO  ] Stage: Misc configuration[ INFO  ] Stage: Package installation[ INFO  ] Stage: Misc configuration[ INFO  ] Configuring libvirt[ INFO  ] Configuring VDSM[ INFO  ] Starting vdsmd[ INFO  ] Waiting for VDSM hardware info[ INFO  ] Configuring the management bridge[ INFO  ] Creating Volume Group[ INFO  ] Creating Storage Domain[ INFO  ] Creating Storage Pool[ INFO  ] Connecting Storage Pool[ INFO  ] Verifying sanlock lockspace initialization[ INFO  ] Creating Image for 'hosted-engine.lockspace' ...[ INFO  ] Image for 'hosted-engine.lockspace' created successfully[ INFO  ] Creating Image for 'hosted-engine.metadata' ...[ INFO  ] Image for 'hosted-engine.metadata' created successfully[ INFO  ] Creating VM Image[ INFO  ] Destroying Storage Pool[ INFO  ] Start monitoring domain[ INFO  ] Configuring VM[ INFO  ] Updating hosted-engine configuration[ INFO  ] Stage: Transaction commit[ INFO  ] Stage: Closing up[ INFO  ] Creating VM  You can now connect to the VM with the following command:    /bin/remote-viewer vnc://localhost:5900... What could be the problem?___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

2016-07-22 Thread aleksey . maksimov

 Hello oVirt guru`s !I have problem with initial deploy of ovirt 4.0 hosted engine.My environment :* Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with multipathd) to storage HP 3PAR 7200* On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)* On 3PAR storage I created 2 LUNs for oVirt.- First LUN for oVirt Hosted Engine VM (60GB)- Second LUN for all other VMs (2TB)# multipath -ll3par-vv1 (360002ac0001bcec9) dm-0 3PARdata,VVsize=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:1:1 sdd 8:48  active ready running  |- 3:0:0:1 sdf 8:80  active ready running  |- 2:0:0:1 sdb 8:16  active ready running  `- 3:0:1:1 sdh 8:112 active ready running3par-vv2 (360002ac00016cec9) dm-1 3PARdata,VVsize=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw`-+- policy='round-robin 0' prio=50 status=active  |- 2:0:0:0 sda 8:0   active ready running  |- 3:0:0:0 sde 8:64  active ready running  |- 2:0:1:0 sdc 8:32  active ready running  `- 3:0:1:0 sdg 8:96  active ready running My steps on first server (initial deploy of ovirt 4.0 hosted engine):# systemctl stop NetworkManager# systemctl disable NetworkManager# yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm# yum -y install epel-release# wget http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso -P /tmp/# yum install ovirt-hosted-engine-setup# yum install screen# screen -RD...in screen session :# hosted-engine --deploy...in configuration process I chose "fc" as storage type for oVirt hosted engine vm and select 60GB LUN..--== CONFIGURATION PREVIEW ==--...  Firewall manager   : iptables  Gateway address    : 10.1.0.1  Host name for web application  : KOM-AD01-OVIRT1  Storage Domain type    : fc  Host ID    : 1  LUN ID : 360002ac0001bcec9  Image size GB  : 40  Console type   : vnc  Memory size MB : 4096  MAC address    : 00:16:3e:77:1d:07  Boot type  : cdrom  Number of CPUs : 2  ISO image (cdrom boot/cloud-init)  : /tmp/CentOS-7-x86_64-NetInstall-1511.iso  CPU Type   : model_Penryn...and get error after step "Verifying sanlock lockspace initialization"...[ INFO  ] Verifying sanlock lockspace initialization[ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable[ INFO  ] Stage: Clean up[ INFO  ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'[ INFO  ] Stage: Pre-termination[ INFO  ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy  Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.logInterestinglyIf I try to deploy hosted-engine v3.6, everything goes well in the same configuration !! :[ INFO  ] Stage: Transaction setup[ INFO  ] Stage: Misc configuration[ INFO  ] Stage: Package installation[ INFO  ] Stage: Misc configuration[ INFO  ] Configuring libvirt[ INFO  ] Configuring VDSM[ INFO  ] Starting vdsmd[ INFO  ] Waiting for VDSM hardware info[ INFO  ] Configuring the management bridge[ INFO  ] Creating Volume Group[ INFO  ] Creating Storage Domain[ INFO  ] Creating Storage Pool[ INFO  ] Connecting Storage Pool[ INFO  ] Verifying sanlock lockspace initialization[ INFO  ] Creating Image for 'hosted-engine.lockspace' ...[ INFO  ] Image for 'hosted-engine.lockspace' created successfully[ INFO  ] Creating Image for 'hosted-engine.metadata' ...[ INFO  ] Image for 'hosted-engine.metadata' created successfully[ INFO  ] Creating VM Image[ INFO  ] Destroying Storage Pool[ INFO  ] Start monitoring domain[ INFO  ] Configuring VM[ INFO  ] Updating hosted-engine configuration[ INFO  ] Stage: Transaction commit[ INFO  ] Stage: Closing up[ INFO  ] Creating VM  You can now connect to the VM with the following command:    /bin/remote-viewer vnc://localhost:5900...What could be the problem?___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

Re: [ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable

21 matches

Site Navigation

Mail list logo

Footer information