Re: [ovirt-users] oVirt Engine 4.1 fails on specifying interface for ovirtmgmt
Great to hear Karli :) Thank you! On Sun, Feb 5, 2017 at 11:03 AM, Karli Sjöbergwrote: > > Den 5 feb. 2017 9:30 fm skrev Michael Burman : > > > > Hi > > > > Karil, it is seems like you didn't configured the vlan device eno1.1 > properly before you run hosted-engine --deploy. > > How did you configured it? > > If the vlan device was properly configured then you should have seen > something like : > > Please indicate a nic to set ovirtmgmt bridge on: (eno1, eno1.1) [eno1]: > > No that wasn't the problem, the network was fine, since I was connected to > it over SSH:) > > What was wrong was that I already had a bridge called 'Public' on that > interface and the deploy couldn't handle that. Maybe RFE material... I just > removed the bridge and deployed again, and then I could specify 'eno1.1'. I > am bummed over the fact that I couldn't create the ovirtmgmt bridge before > the deploy, it just bombed, apparently by design: > https://bugzilla.redhat.com/show_bug.cgi?id=1317125 > > I know how to configure it correctly, and if I don't, I won't blame you > for my mistakes! > > Other than that I have had no problems deploying 4.1 hosted engine. Really > nice new dashboard and I love the new import from KVM feature, which I used > to empty my old environment before reinstalling as the second hosted engine > host. > > Great job everyone! It works great! > > /K > > > > > Regards, > > > > On Sun, Feb 5, 2017 at 9:03 AM, Yedidyah Bar David > wrote: > >> > >> On Fri, Feb 3, 2017 at 3:19 PM, Karli Sjöberg > wrote: > >> > Heya! > >> > > >> > I´m trying to complete 'hosted-engine --deploy' but I´m stuck at: > >> > Please indicate a nic to set ovirtmgmt bridge on: (eno1) [eno1]: > eno1.1 > >> > [ ERROR ] Invalid value > >> > >> This should generally work. Is the vlan interface configured, before you > >> run deploy? > >> > >> Please share both runs' logs. Thanks. > >> > >> Adding Simone. > >> > >> > > >> > As you can see it´s a vlan-tagged interface. If I type in just 'eno1', > >> > the setup continues but fails obviously since it´s the wrong network. > >> > > >> > Any pointers? > >> > > >> > /K > >> > ___ > >> > Users mailing list > >> > Users@ovirt.org > >> > http://lists.ovirt.org/mailman/listinfo/users > >> > >> > >> > >> -- > >> Didi > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > -- > > Michael Burman > > RedHat Israel, RHV-M Network QE > > > > Mobile: 054-5355725 > > IRC: mburman > -- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Engine 4.1 fails on specifying interface for ovirtmgmt
Den 5 feb. 2017 9:30 fm skrev Michael Burman: > > Hi > > Karil, it is seems like you didn't configured the vlan device eno1.1 properly > before you run hosted-engine --deploy. > How did you configured it? > If the vlan device was properly configured then you should have seen > something like : > Please indicate a nic to set ovirtmgmt bridge on: (eno1, eno1.1) [eno1]: No that wasn't the problem, the network was fine, since I was connected to it over SSH:) What was wrong was that I already had a bridge called 'Public' on that interface and the deploy couldn't handle that. Maybe RFE material... I just removed the bridge and deployed again, and then I could specify 'eno1.1'. I am bummed over the fact that I couldn't create the ovirtmgmt bridge before the deploy, it just bombed, apparently by design: https://bugzilla.redhat.com/show_bug.cgi?id=1317125 I know how to configure it correctly, and if I don't, I won't blame you for my mistakes! Other than that I have had no problems deploying 4.1 hosted engine. Really nice new dashboard and I love the new import from KVM feature, which I used to empty my old environment before reinstalling as the second hosted engine host. Great job everyone! It works great! /K > > Regards, > > On Sun, Feb 5, 2017 at 9:03 AM, Yedidyah Bar David wrote: >> >> On Fri, Feb 3, 2017 at 3:19 PM, Karli Sjöberg wrote: >> > Heya! >> > >> > I´m trying to complete 'hosted-engine --deploy' but I´m stuck at: >> > Please indicate a nic to set ovirtmgmt bridge on: (eno1) [eno1]: eno1.1 >> > [ ERROR ] Invalid value >> >> This should generally work. Is the vlan interface configured, before you >> run deploy? >> >> Please share both runs' logs. Thanks. >> >> Adding Simone. >> >> > >> > As you can see it´s a vlan-tagged interface. If I type in just 'eno1', >> > the setup continues but fails obviously since it´s the wrong network. >> > >> > Any pointers? >> > >> > /K >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> -- >> Didi >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Engine 4.1 fails on specifying interface for ovirtmgmt
Hi Karil, it is seems like you didn't configured the vlan device eno1.1 properly before you run hosted-engine --deploy. How did you configured it? If the vlan device was properly configured then you should have seen something like : Please indicate a nic to set ovirtmgmt bridge on: (eno1, eno1.1) [eno1]: Regards, On Sun, Feb 5, 2017 at 9:03 AM, Yedidyah Bar Davidwrote: > On Fri, Feb 3, 2017 at 3:19 PM, Karli Sjöberg > wrote: > > Heya! > > > > I´m trying to complete 'hosted-engine --deploy' but I´m stuck at: > > Please indicate a nic to set ovirtmgmt bridge on: (eno1) [eno1]: eno1.1 > > [ ERROR ] Invalid value > > This should generally work. Is the vlan interface configured, before you > run deploy? > > Please share both runs' logs. Thanks. > > Adding Simone. > > > > > As you can see it´s a vlan-tagged interface. If I type in just 'eno1', > > the setup continues but fails obviously since it´s the wrong network. > > > > Any pointers? > > > > /K > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Didi > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Engine 4.1 fails on specifying interface for ovirtmgmt
On Fri, Feb 3, 2017 at 3:19 PM, Karli Sjöbergwrote: > Heya! > > I´m trying to complete 'hosted-engine --deploy' but I´m stuck at: > Please indicate a nic to set ovirtmgmt bridge on: (eno1) [eno1]: eno1.1 > [ ERROR ] Invalid value This should generally work. Is the vlan interface configured, before you run deploy? Please share both runs' logs. Thanks. Adding Simone. > > As you can see it´s a vlan-tagged interface. If I type in just 'eno1', > the setup continues but fails obviously since it´s the wrong network. > > Any pointers? > > /K > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Engine 4.1 fails on specifying interface for ovirtmgmt
Heya! I´m trying to complete 'hosted-engine --deploy' but I´m stuck at: Please indicate a nic to set ovirtmgmt bridge on: (eno1) [eno1]: eno1.1 [ ERROR ] Invalid value As you can see it´s a vlan-tagged interface. If I type in just 'eno1', the setup continues but fails obviously since it´s the wrong network. Any pointers? /K ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users