Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-10 Thread Vinzenz Feenstra 

> On Jun 9, 2016, at 10:03 AM, Anantha Raghava  
> wrote:
> 
> Hello Michal,
> 
> The live migration fails as mentioned in below mail thread. Events does not 
> provide much details, but shows fails. Screen shot is attached. Host upgrade 
> also fails as it cannot move running VM to another host, put host in 
> maintenance mode.
> 
> 

Well the only way for you to figure out why it fails is to look at 
/var/log/vdsm/vdsm.log on the SourceHost (Host-1) and DestinationHost (Host-2) 
and see what the logs are saying, you should be finding there some ‘ERROR’ or 
at least ‘WARNING’ entries.

> 
> -- 
> 
> Thanks & Regards,
> Anantha Raghava
> 
> On Wednesday 08 June 2016 07:58 PM, Anantha Raghava wrote:
>> Hello Michal,
>> 
>> The Live Migration fails. Events does not show any information but just 
>> mentioning migration failed. This happens even when we put the host into 
>> maintenance. VMs do not migrate and host fails to move into maintenance mode.
>> 
>> Attempted to upgrade the Hosts, but failed, no reasons attached.
>> 
>> I am a bit lost at this stage. Should we check for some more information in 
>> some logs? If yes, where do we find the logs?
>> -- 
>> 
>> Thanks & Regards,
>> Anantha Raghava
>> 
>> On Tuesday 07 June 2016 11:13 PM, Anantha Raghava wrote:
>>> Hello Michal,
>>> 
>>> Guest tools are working and getting all details about guest vm as needed.
>>> 
>>> But one thing I didn't understand. What is the relationship between 
>>> virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
>>> guest services does not start.
>>> 
>>> Also, how do we install memory baloon driver?
>>> 
>>> Tomorrow morning, I will post about Live Migration events after I attempt 
>>> it.
>>> -- 
>>> 
>>> Thanks & Regards,
>>> 
>>> 
>>> 
>>> Anantha Raghava
>>> 
>>> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
 
> On 03 Jun 2016, at 12:57, Anantha Raghava  > wrote:
> 
> Hello Michal,
> 
> Thanks for quick feed back.
> 
> Windows Guests Agents - Where do I download them from? Not getting the 
> proper links. Or is to a part of virt-drivers that we use during 
> installation.
 
 Hi Anantha,
 it’s part of ovirt-guest-tools. See  
 http://lists.ovirt.org/pipermail/users/2016-May/039779.html
  
 
> 
> Live migration failure - These are pretty busy VMs if not big. The event 
> does not show any specific message but just as migration failed. Is the 
> reason logged somewhere? Please share the log location so that I can 
> check & share the log for meaningful message and proper screen shots.
 
 There should be more details in the events at the bottom of the webadmin 
 page (just make it a bit bigger it may not be te last message)
 If they are busy VMs then you may have issues migrating them. There is 
 some simple tuning available and it may help. You can increase the maximum 
 downtime in VM properties dialog (500ms by default, you can go up to 
 whatever is feasible for your VM, seconds, tens of seconds)
 Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you 
 can also tune /etc/vdsm.conf on each host and increase the maximum 
 bandwidth 10 times
 
 Thanks,
 michal
 
> 
> --
> Thanks & Regards,
> 
> 
> 
> Anantha Raghava
> 
>>> On 03 Jun 2016, at 07:14, Anantha Raghava 
>>> > 
>>> wrote:
>>> 
>>> Hi,
>>> 
>>> We have just installed oVirt 3.6 on 3 hosts with storage volumes on 
>>> Fibre Channel storage box. Every thing is working fine except the 
>>> following.
>>> 
>>> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 
>>> R2 OS. VM properties does not report the Operating System nor it shows 
>>> the IP and FQDN in the Admin Portal. There is always an exclamation 
>>> mark that reports about OS being different from the template and 
>>> timezone issues. We have changed the timezone to Indian Standard Time 
>>> in both VM and Host, same result continues. We have installed Windows 
>>> Gues Tools, same result continues. Screen shot is below.
>> 
>> you doesn’t seem to run the guest agent. Make sure the service is 
>> started and works, then you’ll see IPs and more detailed info about each 
>> guest, and exclamation marks should go away
>> 
>>> 
>>> 
>>> 
>>> 2. When we manually tried to migrate the VMs from one host to another 
>>> one, the migration gets initiated, but will eventually fail.
>>> 
>>> Any specific setting missing here or is it a bug.
>> 
>> are they big

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-08 Thread Anantha Raghava 

Hello Michal,

The Live Migration fails. Events does not show any information but just 
mentioning migration failed. This happens even when we put the host into 
maintenance. VMs do not migrate and host fails to move into maintenance 
mode.


Attempted to upgrade the Hosts, but failed, no reasons attached.

I am a bit lost at this stage. Should we check for some more information 
in some logs? If yes, where do we find the logs?


--

Thanks & Regards,

Anantha Raghava


On Tuesday 07 June 2016 11:13 PM, Anantha Raghava wrote:

Hello Michal,

Guest tools are working and getting all details about guest vm as needed.

But one thing I didn't understand. What is the relationship between 
virtioserial driver and oVirt Guest Service? Without virtio serial 
driver, guest services does not start.


Also, how do we install memory baloon driver?

Tomorrow morning, I will post about Live Migration events after I 
attempt it.


--

Thanks & Regards,


Anantha Raghava


On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:


On 03 Jun 2016, at 12:57, Anantha Raghava 
 wrote:


Hello Michal,

Thanks for quick feed back.

Windows Guests Agents - Where do I download them from? Not getting 
the proper links. Or is to a part of virt-drivers that we use during 
installation.


Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html




Live migration failure - These are pretty busy VMs if not big. The 
event does not show any specific message but just as migration 
failed. Is the reason logged somewhere? Please share the log 
location so that I can check & share the log for meaningful message 
and proper screen shots.


There should be more details in the events at the bottom of the 
webadmin page (just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There 
is some simple tuning available and it may help. You can increase the 
maximum downtime in VM properties dialog (500ms by default, you can 
go up to whatever is feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb 
availabl you can also tune /etc/vdsm.conf on each host and increase 
the maximum bandwidth 10 times


Thanks,
michal



--

Thanks & Regards,


Anantha Raghava


On 03 Jun 2016, at 07:14, Anantha Raghava 
 wrote:


Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes 
on Fibre Channel storage box. Every thing is working fine except 
the following.


1. We have created 15 Virtual Machines all VM with Windows Server 
2012 R2 OS. VM properties does not report the Operating System nor 
it shows the IP and FQDN in the Admin Portal. There is always an 
exclamation mark that reports about OS being different from the 
template and timezone issues. We have changed the timezone to 
Indian Standard Time in both VM and Host, same result continues. 
We have installed Windows Gues Tools, same result continues. 
Screen shot is below.


you doesn’t seem to run the guest agent. Make sure the service is 
started and works, then you’ll see IPs and more detailed info about 
each guest, and exclamation marks should go away






2. When we manually tried to migrate the VMs from one host to 
another one, the migration gets initiated, but will eventually fail.


Any specific setting missing here or is it a bug.


are they big or busy VMs? What does it fail on? There should be a 
menaingful message even if it’s just a timeout




Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt 
node is installed and activated.

We do not have a DNS in our environment. We have to do with IPs.


as long as engine works with FQDN it’s ok


We are yet to apply the 3.6.6 patch on Engine and Nodes.


that may help with some of the issues above, so please try to do that

Thanks,
michal


We are running a stand alone engine, not a Hosted Engine.
--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users










___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Vinzenz Feenstra 

> On Jun 7, 2016, at 11:13 PM, Pavel Gashev <p...@acronis.com> wrote:
> 
> It seems guest tools installer is broken at least for Windows 2012 R2. It 
> installs files into Program Files, but doesn't actually install drivers and 
> QEMU guest tools. No errors, it reports that everything is ok, but it's not. 
> oVirt guest tools is installed and work properly.
>  
> Workarounds are the following:
> 1. Start Device Manager and make sure all devices have drivers. Install 
> drivers from «C:\Program Files (x86)\oVirt Guest Tools\drivers» if needed. Do 
> not install video driver.
> 2. Start «C:\Program Files (x86)\oVirt Guest Tools\drivers\qemu-ga-x64.exe» 
> manually.
> 3. Rename «C:\Program Files (x86)\oVirt Guest Tools\drivers\Balloon\2k12R2» 
> into «…\w2k12R2», otherwise installed balloon service doesn't start.
>  

Lev: This ^ looks like a regression in the installer - Please have a look :-) 
Thanks

>  
> From: <users-boun...@ovirt.org <mailto:users-boun...@ovirt.org>> on behalf of 
> Anantha Raghava <rag...@exzatechconsulting.com 
> <mailto:rag...@exzatechconsulting.com>>
> Organization: eXza Technology Consulting & Services
> Reply-To: "rag...@exzatechconsulting.com" <rag...@exzatechconsulting.com>
> Date: Tuesday 7 June 2016 at 20:43
> To: Michal Skrivanek <michal.skriva...@redhat.com>
> Cc: users <users@ovirt.org>
> Subject: Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.
>  
> Hello Michal,
> 
> Guest tools are working and getting all details about guest vm as needed.
> 
> But one thing I didn't understand. What is the relationship between 
> virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
> guest services does not start.
> 
> Also, how do we install memory baloon driver?
> 
> Tomorrow morning, I will post about Live Migration events after I attempt it.
> -- 
> 
> Thanks & Regards,
>  
> Anantha Raghava
>  
> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
>  
> On 03 Jun 2016, at 12:57, Anantha Raghava <rag...@exzatechconsulting.com 
> <mailto:rag...@exzatechconsulting.com>> wrote:
>  
> Hello Michal,
> 
> Thanks for quick feed back.
> 
> Windows Guests Agents - Where do I download them from? Not getting the proper 
> links. Or is to a part of virt-drivers that we use during installation.
>  
> Hi Anantha,
> it’s part of ovirt-guest-tools. See 
> http://lists.ovirt.org/pipermail/users/2016-May/039779.html 
> <http://lists.ovirt.org/pipermail/users/2016-May/039779.html>
>  
> 
> Live migration failure - These are pretty busy VMs if not big. The event does 
> not show any specific message but just as migration failed. Is the reason 
> logged somewhere? Please share the log location so that I can check & share 
> the log for meaningful message and proper screen shots.
>  
> There should be more details in the events at the bottom of the webadmin page 
> (just make it a bit bigger it may not be te last message)
> If they are busy VMs then you may have issues migrating them. There is some 
> simple tuning available and it may help. You can increase the maximum 
> downtime in VM properties dialog (500ms by default, you can go up to whatever 
> is feasible for your VM, seconds, tens of seconds)
> Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you 
> can also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 
> 10 times
>  
> Thanks,
> michal
> 
> 
>  
> -- 
> Thanks & Regards,
> 
>  
> 
> Anantha Raghava
>  
> On 03 Jun 2016, at 07:14, Anantha Raghava <rag...@exzatechconsulting.com 
> <mailto:rag...@exzatechconsulting.com>> wrote:
>  
> Hi,
> 
> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
> Channel storage box. Every thing is working fine except the following.
> 
> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. 
> VM properties does not report the Operating System nor it shows the IP and 
> FQDN in the Admin Portal. There is always an exclamation mark that reports 
> about OS being different from the template and timezone issues. We have 
> changed the timezone to Indian Standard Time in both VM and Host, same result 
> continues. We have installed Windows Gues Tools, same result continues. 
> Screen shot is below.
>  
> you doesn’t seem to run the guest agent. Make sure the service is started and 
> works, then you’ll see IPs and more detailed info about each guest, and 
> exclamation marks should go away
> 
> 
> 
> 
> 
> 2. When we manually tried to migrate the VMs from one host to another one, 
&g

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Pavel Gashev 
It seems guest tools installer is broken at least for Windows 2012 R2. It 
installs files into Program Files, but doesn't actually install drivers and 
QEMU guest tools. No errors, it reports that everything is ok, but it's not. 
oVirt guest tools is installed and work properly.

Workarounds are the following:
1. Start Device Manager and make sure all devices have drivers. Install drivers 
from «C:\Program Files (x86)\oVirt Guest Tools\drivers» if needed. Do not 
install video driver.
2. Start «C:\Program Files (x86)\oVirt Guest Tools\drivers\qemu-ga-x64.exe» 
manually.
3. Rename «C:\Program Files (x86)\oVirt Guest Tools\drivers\Balloon\2k12R2» 
into «…\w2k12R2», otherwise installed balloon service doesn't start.


From: <users-boun...@ovirt.org> on behalf of Anantha Raghava 
<rag...@exzatechconsulting.com>
Organization: eXza Technology Consulting & Services
Reply-To: "rag...@exzatechconsulting.com" <rag...@exzatechconsulting.com>
Date: Tuesday 7 June 2016 at 20:43
To: Michal Skrivanek <michal.skriva...@redhat.com>
Cc: users <users@ovirt.org>
Subject: Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

Hello Michal,

Guest tools are working and getting all details about guest vm as needed.

But one thing I didn't understand. What is the relationship between 
virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
guest services does not start.

Also, how do we install memory baloon driver?

Tomorrow morning, I will post about Live Migration events after I attempt it.

--

Thanks & Regards,



Anantha Raghava

On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:

On 03 Jun 2016, at 12:57, Anantha Raghava 
<rag...@exzatechconsulting.com<mailto:rag...@exzatechconsulting.com>> wrote:

Hello Michal,

Thanks for quick feed back.

Windows Guests Agents - Where do I download them from? Not getting the proper 
links. Or is to a part of virt-drivers that we use during installation.

Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html


Live migration failure - These are pretty busy VMs if not big. The event does 
not show any specific message but just as migration failed. Is the reason 
logged somewhere? Please share the log location so that I can check & share the 
log for meaningful message and proper screen shots.

There should be more details in the events at the bottom of the webadmin page 
(just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There is some 
simple tuning available and it may help. You can increase the maximum downtime 
in VM properties dialog (500ms by default, you can go up to whatever is 
feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you can 
also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 10 
times

Thanks,
michal



--
Thanks & Regards,

Anantha Raghava

On 03 Jun 2016, at 07:14, Anantha Raghava 
<rag...@exzatechconsulting.com<mailto:rag...@exzatechconsulting.com>> wrote:

Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
Channel storage box. Every thing is working fine except the following.

1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. 
VM properties does not report the Operating System nor it shows the IP and FQDN 
in the Admin Portal. There is always an exclamation mark that reports about OS 
being different from the template and timezone issues. We have changed the 
timezone to Indian Standard Time in both VM and Host, same result continues. We 
have installed Windows Gues Tools, same result continues. Screen shot is below.

you doesn’t seem to run the guest agent. Make sure the service is started and 
works, then you’ll see IPs and more detailed info about each guest, and 
exclamation marks should go away





2. When we manually tried to migrate the VMs from one host to another one, the 
migration gets initiated, but will eventually fail.

Any specific setting missing here or is it a bug.

are they big or busy VMs? What does it fail on? There should be a menaingful 
message even if it’s just a timeout



Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt node is 
installed and activated.
We do not have a DNS in our environment. We have to do with IPs.

as long as engine works with FQDN it’s ok


We are yet to apply the 3.6.6 patch on Engine and Nodes.

that may help with some of the issues above, so please try to do that

Thanks,
michal


We are running a stand alone engine, not a Hosted Engine.
--
Thanks & Regards,

Anantha Raghava
eXza Technology Consulting & Services

___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users




___

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Yaniv Kaul 
On Tue, Jun 7, 2016 at 8:43 PM, Anantha Raghava <
rag...@exzatechconsulting.com> wrote:

> Hello Michal,
>
> Guest tools are working and getting all details about guest vm as needed.
>
> But one thing I didn't understand. What is the relationship between
> virtioserial driver and oVirt Guest Service? Without virtio serial driver,
> guest services does not start.
>

True. The transport to communicate with the guest agent is via the virtio
serial channel.


> Also, how do we install memory baloon driver?
>

The regular guest tools installer should install it.
If you can provide more details, that'd be helpful.
Y.


>
> Tomorrow morning, I will post about Live Migration events after I attempt
> it.
>
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava
> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
>
>
> On 03 Jun 2016, at 12:57, Anantha Raghava <
> rag...@exzatechconsulting.com> wrote:
>
> Hello Michal,
>
> Thanks for quick feed back.
>
> Windows Guests Agents - Where do I download them from? Not getting the
> proper links. Or is to a part of virt-drivers that we use during
> installation.
>
>
> Hi Anantha,
> it’s part of ovirt-guest-tools. See
> http://lists.ovirt.org/pipermail/users/2016-May/039779.html
>
>
> Live migration failure - These are pretty busy VMs if not big. The event
> does not show any specific message but just as migration failed. Is the
> reason logged somewhere? Please share the log location so that I can check
> & share the log for meaningful message and proper screen shots.
>
>
> There should be more details in the events at the bottom of the webadmin
> page (just make it a bit bigger it may not be te last message)
> If they are busy VMs then you may have issues migrating them. There is
> some simple tuning available and it may help. You can increase the maximum
> downtime in VM properties dialog (500ms by default, you can go up to
> whatever is feasible for your VM, seconds, tens of seconds)
> Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you
> can also tune /etc/vdsm.conf on each host and increase the maximum
> bandwidth 10 times
>
> Thanks,
> michal
>
>
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava
>
> On 03 Jun 2016, at 07:14, Anantha Raghava 
> wrote:
>
> Hi,
>
> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre
> Channel storage box. Every thing is working fine except the following.
>
> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2
> OS. VM properties does not report the Operating System nor it shows the IP
> and FQDN in the Admin Portal. There is always an exclamation mark that
> reports about OS being different from the template and timezone issues. We
> have changed the timezone to Indian Standard Time in both VM and Host, same
> result continues. We have installed Windows Gues Tools, same result
> continues. Screen shot is below.
>
>
> you doesn’t seem to run the guest agent. Make sure the service is started
> and works, then you’ll see IPs and more detailed info about each guest, and
> exclamation marks should go away
>
>
> 
>
> 2. When we manually tried to migrate the VMs from one host to another one,
> the migration gets initiated, but will eventually fail.
>
> Any specific setting missing here or is it a bug.
>
>
> are they big or busy VMs? What does it fail on? There should be a
> menaingful message even if it’s just a timeout
>
>
> Note:
>
> All hosts are installed with CentOS 7.2 minimal installation oVirt node is
> installed and activated.
> We do not have a DNS in our environment. We have to do with IPs.
>
>
> as long as engine works with FQDN it’s ok
>
> We are yet to apply the 3.6.6 patch on Engine and Nodes.
>
>
> that may help with some of the issues above, so please try to do that
>
> Thanks,
> michal
>
> We are running a stand alone engine, not a Hosted Engine.
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava eXza Technology Consulting & Services
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Anantha Raghava 

Hello Michal,

Guest tools are working and getting all details about guest vm as needed.

But one thing I didn't understand. What is the relationship between 
virtioserial driver and oVirt Guest Service? Without virtio serial 
driver, guest services does not start.


Also, how do we install memory baloon driver?

Tomorrow morning, I will post about Live Migration events after I 
attempt it.


--

Thanks & Regards,


Anantha Raghava


On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:


On 03 Jun 2016, at 12:57, Anantha Raghava 
> wrote:


Hello Michal,

Thanks for quick feed back.

Windows Guests Agents - Where do I download them from? Not getting 
the proper links. Or is to a part of virt-drivers that we use during 
installation.


Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html




Live migration failure - These are pretty busy VMs if not big. The 
event does not show any specific message but just as migration 
failed. Is the reason logged somewhere? Please share the log location 
so that I can check & share the log for meaningful message and proper 
screen shots.


There should be more details in the events at the bottom of the 
webadmin page (just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There is 
some simple tuning available and it may help. You can increase the 
maximum downtime in VM properties dialog (500ms by default, you can go 
up to whatever is feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl 
you can also tune /etc/vdsm.conf on each host and increase the maximum 
bandwidth 10 times


Thanks,
michal



--

Thanks & Regards,


Anantha Raghava


On 03 Jun 2016, at 07:14, Anantha Raghava 
 wrote:


Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes on 
Fibre Channel storage box. Every thing is working fine except the 
following.


1. We have created 15 Virtual Machines all VM with Windows Server 
2012 R2 OS. VM properties does not report the Operating System nor 
it shows the IP and FQDN in the Admin Portal. There is always an 
exclamation mark that reports about OS being different from the 
template and timezone issues. We have changed the timezone to 
Indian Standard Time in both VM and Host, same result continues. We 
have installed Windows Gues Tools, same result continues. Screen 
shot is below.


you doesn’t seem to run the guest agent. Make sure the service is 
started and works, then you’ll see IPs and more detailed info about 
each guest, and exclamation marks should go away






2. When we manually tried to migrate the VMs from one host to 
another one, the migration gets initiated, but will eventually fail.


Any specific setting missing here or is it a bug.


are they big or busy VMs? What does it fail on? There should be a 
menaingful message even if it’s just a timeout




Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt 
node is installed and activated.

We do not have a DNS in our environment. We have to do with IPs.


as long as engine works with FQDN it’s ok


We are yet to apply the 3.6.6 patch on Engine and Nodes.


that may help with some of the issues above, so please try to do that

Thanks,
michal


We are running a stand alone engine, not a Hosted Engine.
--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users








___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-03 Thread Michal Skrivanek 

> On 03 Jun 2016, at 12:57, Anantha Raghava  
> wrote:
> 
> Hello Michal,
> 
> Thanks for quick feed back.
> 
> Windows Guests Agents - Where do I download them from? Not getting the proper 
> links. Or is to a part of virt-drivers that we use during installation.

Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html 


> 
> Live migration failure - These are pretty busy VMs if not big. The event does 
> not show any specific message but just as migration failed. Is the reason 
> logged somewhere? Please share the log location so that I can check & share 
> the log for meaningful message and proper screen shots.

There should be more details in the events at the bottom of the webadmin page 
(just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There is some 
simple tuning available and it may help. You can increase the maximum downtime 
in VM properties dialog (500ms by default, you can go up to whatever is 
feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you can 
also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 10 
times

Thanks,
michal

> 
> --
> Thanks & Regards,
> 
> Anantha Raghava
> 
>>> On 03 Jun 2016, at 07:14, Anantha Raghava < 
>>> rag...@exzatechconsulting.com 
>>> > wrote:
>>> 
>>> Hi,
>>> 
>>> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
>>> Channel storage box. Every thing is working fine except the following.
>>> 
>>> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 
>>> OS. VM properties does not report the Operating System nor it shows the IP 
>>> and FQDN in the Admin Portal. There is always an exclamation mark that 
>>> reports about OS being different from the template and timezone issues. We 
>>> have changed the timezone to Indian Standard Time in both VM and Host, same 
>>> result continues. We have installed Windows Gues Tools, same result 
>>> continues. Screen shot is below.
>> 
>> you doesn’t seem to run the guest agent. Make sure the service is started 
>> and works, then you’ll see IPs and more detailed info about each guest, and 
>> exclamation marks should go away
>> 
>>> 
>>> 
>>> 
>>> 2. When we manually tried to migrate the VMs from one host to another one, 
>>> the migration gets initiated, but will eventually fail.
>>> 
>>> Any specific setting missing here or is it a bug.
>> 
>> are they big or busy VMs? What does it fail on? There should be a menaingful 
>> message even if it’s just a timeout
>> 
>>> 
>>> Note: 
>>> 
>>> All hosts are installed with CentOS 7.2 minimal installation oVirt node is 
>>> installed and activated.
>>> We do not have a DNS in our environment. We have to do with IPs. 
>> 
>> as long as engine works with FQDN it’s ok
>> 
>>> We are yet to apply the 3.6.6 patch on Engine and Nodes.
>> 
>> that may help with some of the issues above, so please try to do that 
>> 
>> Thanks,
>> michal
>> 
>>> We are running a stand alone engine, not a Hosted Engine.
>>> -- 
>>> Thanks & Regards,
>>> 
>>> 
>>> Anantha Raghava
>>> eXza Technology Consulting & Services
>>> 
>>> ___
>>> Users mailing list
>>> Users@ovirt.org 
>>> http://lists.ovirt.org/mailman/listinfo/users 
>>> 
>> 
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-03 Thread Michal Skrivanek 

> On 03 Jun 2016, at 07:14, Anantha Raghava  
> wrote:
> 
> Hi,
> 
> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
> Channel storage box. Every thing is working fine except the following.
> 
> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. 
> VM properties does not report the Operating System nor it shows the IP and 
> FQDN in the Admin Portal. There is always an exclamation mark that reports 
> about OS being different from the template and timezone issues. We have 
> changed the timezone to Indian Standard Time in both VM and Host, same result 
> continues. We have installed Windows Gues Tools, same result continues. 
> Screen shot is below.

you doesn’t seem to run the guest agent. Make sure the service is started and 
works, then you’ll see IPs and more detailed info about each guest, and 
exclamation marks should go away

> 
> 
> 
> 2. When we manually tried to migrate the VMs from one host to another one, 
> the migration gets initiated, but will eventually fail.
> 
> Any specific setting missing here or is it a bug.

are they big or busy VMs? What does it fail on? There should be a menaingful 
message even if it’s just a timeout

> 
> Note: 
> 
> All hosts are installed with CentOS 7.2 minimal installation oVirt node is 
> installed and activated.
> We do not have a DNS in our environment. We have to do with IPs. 

as long as engine works with FQDN it’s ok

> We are yet to apply the 3.6.6 patch on Engine and Nodes.

that may help with some of the issues above, so please try to do that 

Thanks,
michal

> We are running a stand alone engine, not a Hosted Engine.
> -- 
> Thanks & Regards,
> 
> Anantha Raghava
> eXza Technology Consulting & Services
> 
> ___
> Users mailing list
> Users@ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users 
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-02 Thread Anantha Raghava 

Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes on 
Fibre Channel storage box. Every thing is working fine except the following.


1. We have created 15 Virtual Machines all VM with Windows Server 2012 
R2 OS. VM properties does not report the Operating System nor it shows 
the IP and FQDN in the Admin Portal. There is always an exclamation mark 
that reports about OS being different from the template and timezone 
issues. We have changed the timezone to Indian Standard Time in both VM 
and Host, same result continues. We have installed Windows Gues Tools, 
same result continues. Screen shot is below.


VMs

2. When we manually tried to migrate the VMs from one host to another 
one, the migration gets initiated, but will eventually fail.


Any specific setting missing here or is it a bug.

Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt node 
is installed and activated.

We do not have a DNS in our environment. We have to do with IPs.
We are yet to apply the 3.6.6 patch on Engine and Nodes.
We are running a stand alone engine, not a Hosted Engine.
--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools

2015-01-20 Thread Federico Alberto Sayd 

On 19/01/15 12:25, Itamar Heim wrote:

On 01/19/2015 04:20 PM, Blaster wrote:

The Wiki doesn’t bother to tell you that these are actually in an RPM.

install this RPM:

ovirt-guest-tools-*iso*-3.5-7.noarch

That will install the ISO here:

/usr/share/ovirt-guest-*tool*s-iso/

Copy it to where you need it...



its a wiki - please update it to make it easy for future use...
thanks


+1
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools

2015-01-20 Thread Martin Pavlík 
Hi,

can you check section Installation and let me know if it will do? 

http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools#oVirt_Windows_Guest_Tools_ISO
 
http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools#oVirt_Windows_Guest_Tools_ISO

HTH

Martin Pavlik

 On 19 Jan 2015, at 15:20, Blaster blas...@556nato.com wrote:
 
 The Wiki doesn’t bother to tell you that these are actually in an RPM.
 
 install this RPM:
 
 ovirt-guest-tools-iso-3.5-7.noarch
 
 That will install the ISO here:
 
 /usr/share/ovirt-guest-tools-iso/
 
 Copy it to where you need it...
 
 
 On Jan 17, 2015, at 7:28 PM, Nick Kesick cybertimber2...@gmail.com 
 mailto:cybertimber2...@gmail.com wrote:
 
 Hey guys, I see that the feature page for the oVirt Windows Guest Tools [1] 
 has been updated to show that the tools have been released, but I don't see 
 *any* download links anywhere. 
 Can anyone shed some light on the download path so I can update the wiki?
 
 -- 
 cybertimber2...@gmail.com mailto:cybertimber2...@gmail.com
 
 [1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools 
 http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools___
 Users mailing list
 Users@ovirt.org mailto:Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools

2015-01-19 Thread Blaster 
The Wiki doesn’t bother to tell you that these are actually in an RPM.

install this RPM:

ovirt-guest-tools-iso-3.5-7.noarch

That will install the ISO here:

/usr/share/ovirt-guest-tools-iso/

Copy it to where you need it...


On Jan 17, 2015, at 7:28 PM, Nick Kesick cybertimber2...@gmail.com wrote:

 Hey guys, I see that the feature page for the oVirt Windows Guest Tools [1] 
 has been updated to show that the tools have been released, but I don't see 
 *any* download links anywhere. 
 Can anyone shed some light on the download path so I can update the wiki?
 
 -- 
 cybertimber2...@gmail.com
 
 [1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools

2015-01-19 Thread Itamar Heim 

On 01/19/2015 04:20 PM, Blaster wrote:

The Wiki doesn’t bother to tell you that these are actually in an RPM.

install this RPM:

ovirt-guest-tools-*iso*-3.5-7.noarch

That will install the ISO here:

/usr/share/ovirt-guest-*tool*s-iso/

Copy it to where you need it...



its a wiki - please update it to make it easy for future use...
thanks



On Jan 17, 2015, at 7:28 PM, Nick Kesick cybertimber2...@gmail.com
mailto:cybertimber2...@gmail.com wrote:


Hey guys, I see that the feature page for the oVirt Windows Guest
Tools [1] has been updated to show that the tools have been released,
but I don't see *any* download links anywhere.
Can anyone shed some light on the download path so I can update the wiki?

--
cybertimber2...@gmail.com mailto:cybertimber2...@gmail.com

[1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools
___
Users mailing list
Users@ovirt.org mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools

2015-01-17 Thread Donny Davis 
http://plain.resources.ovirt.org/pub/ovirt-3.5/exe/ovirt-guest-tools/

 

Regards

Donny D

 

From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of 
Nick Kesick
Sent: Saturday, January 17, 2015 6:29 PM
To: users@ovirt.org
Subject: [ovirt-users] oVirt Windows Guest Tools

 

Hey guys, I see that the feature page for the oVirt Windows Guest Tools [1] has 
been updated to show that the tools have been released, but I don't see *any* 
download links anywhere. 
Can anyone shed some light on the download path so I can update the wiki?


-- 

cybertimber2...@gmail.com

 

[1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Windows Guest Tools

2015-01-17 Thread Nick Kesick 
Hey guys, I see that the feature page for the oVirt Windows Guest Tools [1]
has been updated to show that the tools have been released, but I don't see
*any* download links anywhere.
Can anyone shed some light on the download path so I can update the wiki?

-- 
cybertimber2...@gmail.com

[1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users