Re: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR

Thx for all! Now we are testing this basic configuration (it can be helpfull for somebody): c2960-169-sed-stack#enablec2960-169-sed-stack#configure terminalc2960-169-sed-stack(config)#interface range gigabitEthernet 1/0/1-24, gigabitEthernet 2/0/1-24c2960-169-sed-stack(config-if-range)#no

Re: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR

Hello Alexey, I'm not a switch guy, but I think the Cisco keyword for bond mode 4 is LACP - you should probably Google that with respect to your specific switch or look for it in the manual. Or maybe someone more knowledgeable from the community would be able to help... Yours, Lior. On

Re: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR

Il 14/Dic/2014 09:56 Lior Vernia lver...@redhat.com ha scritto: Hello Alexey, I'm not a switch guy, but I think the Cisco keyword for bond mode 4 is LACP - you should probably Google that with respect to your specific switch or look for it in the manual. Or maybe someone more knowledgeable

Re: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR

Hi Alex, I'm using a similar setup on c3560-X (configuration should be the same). on the switch: interface Port-channel1 description srv, RHEV-01, lacp, trunk switchport trunk encapsulation dot1q switchport trunk native vlan 666 switchport mode trunk and on all ports leading to the

[ovirt-users] oVirt bonding mode4 + cisco 2960 XR

Hi, community! I have made bond0 mode4 (eth0+eth1+eth2+eth3) by oVirt portal. It's work well on CentOS 7 node. How I can setup my cisco 2960 XR switch for work with this bond0 for loadbalancing + aggregation (802.3ad)? ___ Users mailing list