[ovirt-users] oVirt 3.6: Node went into Error state while migrations happening

On the node in question, the metadata isn't coming across (state) wise. It shows VMs being in an unknown state (some are up and some are down), some show as migrating and there are 9 forever hung migrating tasks. We tried to bring up some of the down VMs that had a state of Down, but that

[ovirt-users] oVirt 3.6 SLA and QoS algorithm

Hello! We are using oVirt 3.6 in our infrastructure and storage QoS in passive state (they are configured but not applie) for some of the servers. Last time we needed to activate QoS on high load servers and it caused storage load decrease. And this situation has raised some questions: 1.

Re: [ovirt-users] Ovirt 3.6 to 4.2 upgrade

Hi Yaniv We attempted to share the code a few years back, but I don't think it got accepted. In vdsm.conf we have two bridged interfaces, each connected to a SAN uplink: [irs] iscsi_default_ifaces = san1,san2 And here is a diff of the file /usr/lib/python2.7/site-packages/vdsm/storage/ vs the

Re: [ovirt-users] Ovirt 3.6 to 4.2 upgrade

On Fri, Feb 9, 2018 at 4:06 PM, Gary Lloyd wrote: > Hi > > Is it possible/supported to upgrade from Ovirt 3.6 straight to Ovirt 4.2 ? > No, you go through 4.0, 4.1. > Does live migration still function between the older vdsm nodes and vdsm > nodes with software built

Re: [ovirt-users] Ovirt 3.6 to 4.2 upgrade

Hello Gary, as far as i know upgrade path isn't direct and you have to migrate first to 4.0, then 4.1 and finally 4.2. You can migrate vms from 3.6 to 4.0 IIRC. But don't know if mixing 4.2 and 3.6 it's possible. Luca On Fri, Feb 9, 2018 at 3:06 PM, Gary Lloyd wrote: > Hi

[ovirt-users] Ovirt 3.6 to 4.2 upgrade

Hi Is it possible/supported to upgrade from Ovirt 3.6 straight to Ovirt 4.2 ? Does live migration still function between the older vdsm nodes and vdsm nodes with software built against Ovirt 4.2 ? We changed a couple of the vdsm python files to enable iscsi multipath on direct luns. (It's a

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

Answering my own post... a restart of vdsmd on the affected blade has fixed everything. Thanks everyone who helped. On 02/05/2018 10:02 AM, Christopher Cox wrote: Forgive the top post.  I guess what I need to know now is whether there is a recovery path that doesn't lead to total loss of the

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

Forgive the top post. I guess what I need to know now is whether there is a recovery path that doesn't lead to total loss of the VMs that are currently in the "Unknown" "Not responding" state. We are planning a total oVirt shutdown. I just would like to know if we've effectively lot those

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

Da: users-boun...@ovirt.org <users-boun...@ovirt.org> per conto di Christopher Cox <c...@endlessnow.com> Inviato: venerdì 26 gennaio 2018 01:57 A: dougsl...@redhat.com Cc: users Oggetto: Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

On 01/25/2018 04:57 PM, Douglas Landgraf wrote: On Thu, Jan 25, 2018 at 5:12 PM, Christopher Cox wrote: On 01/25/2018 02:25 PM, Douglas Landgraf wrote: On Wed, Jan 24, 2018 at 10:18 AM, Christopher Cox wrote: Would restarting vdsm on the node in

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

On Thu, Jan 25, 2018 at 5:12 PM, Christopher Cox wrote: > On 01/25/2018 02:25 PM, Douglas Landgraf wrote: >> >> On Wed, Jan 24, 2018 at 10:18 AM, Christopher Cox >> wrote: >>> >>> Would restarting vdsm on the node in question help fix this? Again, all

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

On 01/25/2018 02:25 PM, Douglas Landgraf wrote: On Wed, Jan 24, 2018 at 10:18 AM, Christopher Cox wrote: Would restarting vdsm on the node in question help fix this? Again, all the VMs are up on the node. Prior attempts to fix this problem have left the node in a state

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

On Wed, Jan 24, 2018 at 10:18 AM, Christopher Cox wrote: > Would restarting vdsm on the node in question help fix this? Again, all the > VMs are up on the node. Prior attempts to fix this problem have left the > node in a state where I can issue the "has been rebooted"

Re: [ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

Would restarting vdsm on the node in question help fix this? Again, all the VMs are up on the node. Prior attempts to fix this problem have left the node in a state where I can issue the "has been rebooted" command to it, it's confused. So... node is up. All VMs are up. Can't issue "has

[ovirt-users] ovirt 3.6, we had the ovirt manager go down in a bad way and all VMs for one node marked Unknown and Not Reponding while up

Like the subject says.. I tried to clear the status from the vm_dynamic for a VM, but it just goes back to 8. Any hints on how to get things back to a known state? I tried marking the node in maint, but it can't move the "Unknown" VMs, so that doesn't work. I tried rebooting a VM, that

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

Ah! Okay, thanks for the assistance Yaniv. I'll go ahead and start the upgrade to Centos 7 process asap. Regards. Neil Wilson. On Wed, Aug 2, 2017 at 2:06 PM, Yaniv Kaul wrote: > > > On Wed, Aug 2, 2017 at 2:39 PM, Neil wrote: > >> Thanks Yaniv, >>

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

On Wed, Aug 2, 2017 at 2:39 PM, Neil wrote: > Thanks Yaniv, > > > On Wed, Aug 2, 2017 at 12:12 PM, Yaniv Kaul wrote: > >> >> >> On Wed, Aug 2, 2017 at 1:06 PM, Neil wrote: >> >>> Hi Yaniv, >>> >>> Thanks for the assistance. >>> >>>

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

Thanks Yaniv, On Wed, Aug 2, 2017 at 12:12 PM, Yaniv Kaul wrote: > > > On Wed, Aug 2, 2017 at 1:06 PM, Neil wrote: > >> Hi Yaniv, >> >> Thanks for the assistance. >> >> On Wed, Aug 2, 2017 at 12:01 PM, Yaniv Kaul wrote: >> >>> >>> >>>

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

On Wed, Aug 2, 2017 at 1:06 PM, Neil wrote: > Hi Yaniv, > > Thanks for the assistance. > > On Wed, Aug 2, 2017 at 12:01 PM, Yaniv Kaul wrote: > >> >> >> On Wed, Aug 2, 2017 at 12:09 PM, Neil wrote: >> >>> Hi guys, >>> >>> I upgraded

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

Hi Yaniv, Thanks for the assistance. On Wed, Aug 2, 2017 at 12:01 PM, Yaniv Kaul wrote: > > > On Wed, Aug 2, 2017 at 12:09 PM, Neil wrote: > >> Hi guys, >> >> I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available in >> the ovirt 3.6 repo,

Re: [ovirt-users] oVirt 3.6.x and Centos 6.9

On Wed, Aug 2, 2017 at 12:09 PM, Neil wrote: > Hi guys, > > I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available in > the ovirt 3.6 repo, however I seem to be encountering a known bug ( > https://bugzilla.redhat.com/show_bug.cgi?id=1387949) > This specific

[ovirt-users] oVirt 3.6.x and Centos 6.9

Hi guys, I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available in the ovirt 3.6 repo, however I seem to be encountering a known bug ( https://bugzilla.redhat.com/show_bug.cgi?id=1387949) which looks to be fixed in ovirt 3.6.9.2 but I can't seem to find out how to install this. I

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

On Thu, Mar 30, 2017 at 4:39 PM, Sahina Bose wrote: > > > On Wed, Mar 29, 2017 at 10:36 PM, Liron Aravot wrote: > >> >> >> On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot >> wrote: >> >>> [Please ignore the previous msg] >>> >>>

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

On Wed, Mar 29, 2017 at 10:36 PM, Liron Aravot wrote: > > > On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot > wrote: > >> [Please ignore the previous msg] >> >> Hello, >> >> One of our DC is a very small one, though quite critical. >> It's almost hyper

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot wrote: > [Please ignore the previous msg] > > Hello, > > One of our DC is a very small one, though quite critical. > It's almost hyper converged : hosts are compute+storage, but the engine is > standalone. > > It's made of : >

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

On Wed, Mar 29, 2017 at 5:16 PM, Nicolas Ecarnot wrote: > Le 29/03/2017 à 15:54, Yedidyah Bar David a écrit : >> >> On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot >> wrote: >>> >>> [Please ignore the previous msg] >>> >>> Hello, > > > Hello Didi, > >>>

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

Le 29/03/2017 à 15:54, Yedidyah Bar David a écrit : On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot wrote: [Please ignore the previous msg] Hello, Hello Didi, One of our DC is a very small one, though quite critical. It's almost hyper converged : hosts are

Re: [ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

On Wed, Mar 29, 2017 at 4:35 PM, Nicolas Ecarnot wrote: > [Please ignore the previous msg] > > Hello, > > One of our DC is a very small one, though quite critical. > It's almost hyper converged : hosts are compute+storage, but the engine is > standalone. And you intend to

[ovirt-users] oVirt 3.6 on CentOS 6.7 based HyperConverged DC : Upgradable?

[Please ignore the previous msg] Hello, One of our DC is a very small one, though quite critical. It's almost hyper converged : hosts are compute+storage, but the engine is standalone. It's made of : Hardware : - one physical engine : CentOS 6.7 - 3 physical hosts : CentOS 7.2 Software : -

[ovirt-users] oVirt 3.6 on CentOS 7.1 based HyperConverged DC : Upgradable?

Hello, One of our DC is a very small one, though quite critical. It's almost hyper converged : hosts are compute+storage, but the engine is standalone. It's made of : Hardware : - one physical engine : CentOS 7.1 - 3 physical hosts : CentOS 7.2 Software : - oVirt 3.6.5 - glusterFS 3.7.16 in

Re: [ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

Unfortunatelly no, we decided to use UPN instead of SAM account name, because SAM account name is limit IIRC to 15 characters, while UPN is not limited. On 10/26/2016 08:58 PM, Beckman, Daniel wrote: That’s it! Some background: within our IT department most of us have a regular user account

Re: [ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

That’s it! Some background: within our IT department most of us have a regular user account and an administrative account. For the later account type, the UPN and SAM account name happen to be the same (e.g. jdoead...@example.com) whereas for regular users UPN is something like

Re: [ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

On 10/26/2016 06:31 PM, Beckman, Daniel wrote: I have been updating our oVirt 3.6 (3.6.7.5-1) environment in preparation for upgrading to oVirt 4. We had been using the legacy AD connection (via engine-manage-domains), and since that’s no longer available in oVirt 4, this was a priorty. (I

[ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

I have been updating our oVirt 3.6 (3.6.7.5-1) environment in preparation for upgrading to oVirt 4. We had been using the legacy AD connection (via engine-manage-domains), and since that’s no longer available in oVirt 4, this was a priorty. (I put this off as long as I could – I found the new

Re: [ovirt-users] [ovirt 3.6] Logical network not working

Hello, after some time i had the possibility to get in touch with RH support, since the problem was hitting also a setup with RHV 4.0. Seems that the problem is related to the hardware i'm using, which is a Emulex 554FLB CNA.There is a problem is that the nic uses SR-IOV, which on that model

[ovirt-users] oVirt 3.6 and Fedora 24: How to change display resolution?

I am unable to change the display for a Fedora 24 Workstation using Gnome 3.20 from its default 1024 x 768. I, also, tried a number of spins but the behavior persist. Installing on a physical desktop does not reproduce the symptom. Installing CentOS 7 does not reproduce the symptom. Under the

[ovirt-users] ovirt 3.6: hosted engine migration to glusterfs

Hello, I have just upgraded my ovirt cluster from 3.5 to 3.6 and now I have HostedEngine on the LocalStorage of the node. I have executed the command hosted-engine --deploy on other nodes,  actually I have the HE image on a nfs filesystem mounted on 5 nodes  but I would migrate the HE image to

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Wed, Sep 14, 2016 at 11:49 AM, Edward Haas wrote: > > Yes, it looks like the response gets stuck in the bridge for some reason. > Can you please share your kernel version? Yes, [root@kvmovirt02 ~]# uname -r 3.10.0-327.4.5.el7.x86_64 thank you -- "E' assurdo impiegare gli

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Wed, Sep 14, 2016 at 12:22 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > On Wed, Sep 14, 2016 at 10:54 AM, Edward Haas wrote: > > If I understood correctly, the VM cannot ping the gw/pc even without > vlans in > > place. > > Do you have multiple macs

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Wed, Sep 14, 2016 at 10:54 AM, Edward Haas wrote: > If I understood correctly, the VM cannot ping the gw/pc even without vlans in > place. > Do you have multiple macs on the VM itself? (like a bridge or some sub > interfaces) No, i have not. > The only thing that comes to

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Tue, Sep 13, 2016 at 10:41 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > On Tue, Sep 13, 2016 at 9:20 PM, Edward Haas wrote: > > > > > > On Mon, Sep 12, 2016 at 3:14 PM, Luca 'remix_tj' Lorenzetto > > wrote: > >> > >> On

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Tue, Sep 13, 2016 at 9:20 PM, Edward Haas wrote: > > > On Mon, Sep 12, 2016 at 3:14 PM, Luca 'remix_tj' Lorenzetto > wrote: >> >> On Mon, Sep 12, 2016 at 2:11 PM, Colin Coe wrote: >> > So is the problem getting traffic between

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Mon, Sep 12, 2016 at 3:14 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > On Mon, Sep 12, 2016 at 2:11 PM, Colin Coe wrote: > > So is the problem getting traffic between two different VLANs working? > If > > so, have you double checked your routing? >

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Mon, Sep 12, 2016 at 2:11 PM, Colin Coe wrote: > So is the problem getting traffic between two different VLANs working? If > so, have you double checked your routing? No, the issue is that VM cannot still ping the gateway of it's own network. Resuming: VM can ping the

Re: [ovirt-users] [ovirt 3.6] Logical network not working

So is the problem getting traffic between two different VLANs working? If so, have you double checked your routing? On Mon, Sep 12, 2016 at 8:09 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > On Mon, Sep 12, 2016 at 2:08 PM, Colin Coe wrote: > > I've

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Mon, Sep 12, 2016 at 2:08 PM, Colin Coe wrote: > I've been using RHEV with HP virtual connect (currently C7000 with > Flex10/10D, previously C3000 With Flex10) for years now, mostly without > problems. > > The switch port that connects the virtual connect environment to

Re: [ovirt-users] [ovirt 3.6] Logical network not working

I've been using RHEV with HP virtual connect (currently C7000 with Flex10/10D, previously C3000 With Flex10) for years now, mostly without problems. The switch port that connects the virtual connect environment to the rest of your network, is it configured as a trunk and is VLAN 828 allowed? On

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Mon, Sep 12, 2016 at 2:01 PM, Luca 'remix_tj' Lorenzetto wrote: [cut] > Making some bridge troubleshooting i found out that: > > arp request is sent by the VM > arp request is forwarded by the "Development" bridge > arp reply is sent by the router 10.5.31.254 back to

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Mon, Sep 12, 2016 at 9:44 AM, Luca 'remix_tj' Lorenzetto wrote: > I did also the same using the ovirtmgmt logical network and i'm > experiencing the same problem. Did some other investigation, with new findings. Tried using a CirrOS image to eliminate possible

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Sun, Sep 11, 2016 at 7:32 PM, Edward Haas wrote: > > This means you have a trunk set on the switch port connected to eno5, right? I'm using HP Virtual Connect and i configured the interface as "Multiple Networks". On that interface i can list the VLANs that i need on the

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Fri, Sep 9, 2016 at 2:05 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > On Fri, Sep 9, 2016 at 12:49 PM, Edward Haas wrote: > > > > > > > Can you please elaborate on what address you assigned to the VM and > > to what address did you tried to ping? > >

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Fri, Sep 9, 2016 at 12:49 PM, Edward Haas wrote: > > > Can you please elaborate on what address you assigned to the VM and > to what address did you tried to ping? I can explain more how is the network setup: i have a vlan with vlan id 828. The addressing assigned to this

Re: [ovirt-users] [ovirt 3.6] Logical network not working

; I'll try to recreate and see what the possible causes can be. > > > > Thanks, > > Marcin > > > > > > - Original Message - > >> From: "Luca 'remix_tj' Lorenzetto" <lorenzetto.l...@gmail.com> > >> To: users@ovirt.org >

Re: [ovirt-users] [ovirt 3.6] Logical network not working

On Fri, Sep 9, 2016 at 11:08 AM, Marcin Mirecki wrote: > Luca, > > Have you tried adding a network with no VLAN? Can you try adding > another network the same way, but with no VLAN? > This could help us to establish the cause of the problem (vlan or other). > Hello, i'll

Re: [ovirt-users] [ovirt 3.6] Logical network not working

renzetto" <lorenzetto.l...@gmail.com> > To: users@ovirt.org > Sent: Thursday, September 8, 2016 5:44:27 PM > Subject: [ovirt-users] [ovirt 3.6] Logical network not working > > Hello, > > i'm new to ovirt and i did some months ago a setup of ovirt 3.6 for > playing.

Re: [ovirt-users] ovirt 3.6 python sdk how to find logical network from a host nic?

On 08/16/2016 08:20 PM, Huan He (huhe) wrote: > Hi Juan, > > Thanks! It works. > > One more question, do you know how to do ³save network configuration² in > the api? I did the following > > Params.Action(force=1, check_connectivity=1, host_nics=host_nics) > > but the gui says the network

Re: [ovirt-users] ovirt 3.6 python sdk how to find logical network from a host nic?

Hi Juan, Thanks! It works. One more question, do you know how to do ³save network configuration² in the api? I did the following Params.Action(force=1, check_connectivity=1, host_nics=host_nics) but the gui says the network configuration is not saved. I can¹t find any relevant params in the

Re: [ovirt-users] ovirt 3.6 python sdk how to find logical network from a host nic?

On 08/13/2016 12:17 AM, Huan He (huhe) wrote: > Assuming the logical network ovirtmgmt has been configured in host NIC > enp6s0. > > host = api.hosts.get(‘host-123’) > host_nic = host.nics.get(‘enp6s0’) > > How to get the logical network name ovirtmgmt? > > I basically need to find ovirtmgmt is

[ovirt-users] ovirt 3.6 python sdk how to find logical network from a host nic?

Assuming the logical network ovirtmgmt has been configured in host NIC enp6s0. host = api.hosts.get('host-123') host_nic = host.nics.get('enp6s0') How to get the logical network name ovirtmgmt? I basically need to find ovirtmgmt is configured in which NIC. Thanks, Huan

Re: [ovirt-users] ovirt-3.6 : Hosted-engine crashed and can't restart

> The issue seams here: please ensure that you can correctly connect > your storage server. > Can you please attach vdsm logs? Yes actually I figured out it was a DNS problem : as mentioned in the messages from the log I provided, it wasn't able to reach the NFS where the engine was (as it

Re: [ovirt-users] ovirt-3.6 : Hosted-engine crashed and can't restart

On Wed, Jul 20, 2016 at 5:01 PM, Alexis HAUSER wrote: > After assigning an IP adress to a VLAN network (it was using DHCP by default) > that was on the same NIC than ovirtmgmt, my hosted-engine crashed and can't > start again...I have no idea how to fix this.

[ovirt-users] ovirt-3.6 : Hosted-engine crashed and can't restart

After assigning an IP adress to a VLAN network (it was using DHCP by default) that was on the same NIC than ovirtmgmt, my hosted-engine crashed and can't start again...I have no idea how to fix this. I had a similar issue some months ago but with a different error. I tried to restart the ha

Re: [ovirt-users] Ovirt 3.6.x upgrade to 4.0: HE VM not shutdownable - hyperkonverged r3a1 setup

On Mon, Jul 4, 2016 at 12:02 PM, Roy Golan wrote: > reformatting cause the command I gave you is missing quotes > > > ```bash > su - postgres > psql engine -c "update vm_static set cluster_id = (select cluster_id from > cluster where name = 'NEWCLUSTERNAME') where vm_name =

Re: [ovirt-users] Ovirt 3.6.x upgrade to 4.0: HE VM not shutdownable - hyperkonverged r3a1 setup

reformatting cause the command I gave you is missing quotes ```bash su - postgres psql engine -c "update vm_static set cluster_id = (select cluster_id from cluster where name = 'NEWCLUSTERNAME') where vm_name = 'HostedEngine'; " ``` On Mon, Jul 4, 2016 at 12:02 PM, Roy Golan

Re: [ovirt-users] Ovirt 3.6.x upgrade to 4.0: HE VM not shutdownable - hyperkonverged r3a1 setup

On Thu, Jun 30, 2016 at 12:33 PM, Roy Golan wrote: > > > On Wed, Jun 29, 2016 at 10:25 AM, wrote: > >> Hello all, >> >> yesterday I upgraded my 3.6.x to 4.0 and got stuck with obviously not >> being able to shutdown HE VM itself ("shutdown all VMs" required

Re: [ovirt-users] Ovirt 3.6.x upgrade to 4.0: HE VM not shutdownable - hyperkonverged r3a1 setup

On Wed, Jun 29, 2016 at 10:25 AM, wrote: > Hello all, > > yesterday I upgraded my 3.6.x to 4.0 and got stuck with obviously not > being able to shutdown HE VM itself ("shutdown all VMs" required for > increasing the compatibility level to 4.0). As I luckily already had a 4th >

Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade

to none. Does that make sense? From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Yaniv Dary Sent: dimanche 26 juin 2016 14:43 To: biholc...@l1049h.com Cc: users <users@ovirt.org> Subject: Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade What OS are you r

[ovirt-users] oVirt 3.6 to 4.0 Upgrade

In order to not hijack another thread I wanted to separate this from the "latest CentOS libvirt updates safe?" thread since this is different than what the OP on that thread wants to do. I've been digging through the 4.0 documentation since I'd like to upgrade in the not to distant future so

Re: [ovirt-users] oVirt 3.6 with ScaleIO

Thank you, Gianluca. The OpenStack integration with ScaleIO absolutely warrants further investigation on my part. It looks like a rather recent addition to ScaleIO, so I'll need to run that in a lab setting for a while. It looks like the best long term option. In the meantime, I think

Re: [ovirt-users] oVirt 3.6 with ScaleIO

On Sun, May 29, 2016 at 7:18 AM, Scott Sobotka wrote: > Has anyone gotten an oVirt hosted engine and shared storage environment > running with ScaleIO as the backing storage? > > I was thinking that I would just set up iSCSI LUNs in ScaleIO and have > oVirt point directly to

[ovirt-users] oVirt 3.6 with ScaleIO

Has anyone gotten an oVirt hosted engine and shared storage environment running with ScaleIO as the backing storage? I was thinking that I would just set up iSCSI LUNs in ScaleIO and have oVirt point directly to one for the hosted engine setup. From there, my plan was to assign disks to VMs

Re: [ovirt-users] ovirt 3.6 hosted engine vm not displaying in vms tab

Hi, Can you please provide the logs from the time of the upgrade (engine and vdsm)? On Thu, Apr 21, 2016 at 5:22 PM, Dobó László wrote: > Hi, > > I just upgraded from 3.6.3 to 3.6.5, but the hosted engine vm still not > visible in vms list. > Its running on iscsi storage

[ovirt-users] ovirt 3.6 hosted engine vm not displaying in vms tab

Hi, I just upgraded from 3.6.3 to 3.6.5, but the hosted engine vm still not visible in vms list. Its running on iscsi storage domain. The hosted_storage status is "Inactive", cross data center status is "Locked". I didn't find anything interesting in engine or vdsm log file. Is there any

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Den 28 mars 2016 7:39 em skrev Ondra Machacek : > > On 03/27/2016 11:40 AM, Karli Sjöberg wrote: > > > >> On 26 Mar 2016, at 21:32, Ondra Machacek wrote: > >> > >> On 03/26/2016 02:09 PM, Karli Sjöberg wrote: > >>> > On 26 Mar 2016, at 13:49, Karli

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

> On 26 Mar 2016, at 21:32, Ondra Machacek wrote: > > On 03/26/2016 02:09 PM, Karli Sjöberg wrote: >> >>> On 26 Mar 2016, at 13:49, Karli Sjöberg >> > wrote: >>> >>> On 26 Mar 2016, at 11:35, Ondra Machacek

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

On 03/26/2016 02:09 PM, Karli Sjöberg wrote: On 26 Mar 2016, at 13:49, Karli Sjöberg > wrote: On 26 Mar 2016, at 11:35, Ondra Machacek > wrote: For me it's working completelly fine: ...

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

On 26 Mar 2016, at 13:49, Karli Sjöberg > wrote: On 26 Mar 2016, at 11:35, Ondra Machacek > wrote: For me it's working completelly fine: ... config.mapUser.type = regex

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

On 26 Mar 2016, at 11:35, Ondra Machacek > wrote: For me it's working completelly fine: ... config.mapUser.type = regex config.mapUser.regex.pattern = ^(?[^@]*)$ config.mapUser.regex.replacement = ${user}@DOMAINX.com

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

For me it's working completelly fine: ... config.mapUser.type = regex config.mapUser.regex.pattern = ^(?[^@]*)$ config.mapUser.regex.replacement = ${user}@DOMAINX.com config.mapUser.regex.mustMatch = false ... $ ovirt-engine-extensions-tool aaa login-user --password=pass:password

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

What the heck, my message disappeares! Trying again. Ok, so it's mapping now but the only thing working is: config.mapUser.regex.pattern = u...@baz.foo.bar config.mapUser.regex.replacement = u...@foo.bar And that isn't very useful. Please advice! /K On 03/25/2016 12:26 AM, Karli Sjöberg wrote:

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Den 25 mars 2016 9:32 em skrev Ondra Machacek : > > On 03/25/2016 12:26 AM, Karli Sjöberg wrote: > > On 03/25/2016 12:26 AM, Karli Sjöberg wrote: > > Den 25 mars 2016 12:10 fm skrev Karli Sjöberg : > > > > > > Den 24 mars 2016 11:26 em skrev Ondra

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Den 25 mars 2016 12:10 fm skrev Karli Sjöberg : > > > Den 24 mars 2016 11:26 em skrev Ondra Machacek : > > > > On 03/24/2016 11:14 PM, Karli Sjöberg wrote: > > > > > > Den 24 mars 2016 7:26 em skrev Ondra Machacek : > > > > > > > >

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Den 24 mars 2016 11:26 em skrev Ondra Machacek : > > On 03/24/2016 11:14 PM, Karli Sjöberg wrote: > > > > Den 24 mars 2016 7:26 em skrev Ondra Machacek : > > > > > > On 03/24/2016 06:16 PM, Karli Sjöberg wrote: > > > > Hi! > > > > > > > > > > > >

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

On 03/24/2016 11:14 PM, Karli Sjöberg wrote: Den 24 mars 2016 7:26 em skrev Ondra Machacek : > > On 03/24/2016 06:16 PM, Karli Sjöberg wrote: > > Hi! > > > > > > Starting new thread instead of jacking someone else´s. > > > > > > Managed to migrate from old

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Den 24 mars 2016 7:26 em skrev Ondra Machacek : > > On 03/24/2016 06:16 PM, Karli Sjöberg wrote: > > Hi! > > > > > > Starting new thread instead of jacking someone else´s. > > > > > > Managed to migrate from old 'engine-manage-domains' auth to aaa-ldap using: > > > > #|

Re: [ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

On 03/24/2016 06:16 PM, Karli Sjöberg wrote: Hi! Starting new thread instead of jacking someone else´s. Managed to migrate from old 'engine-manage-domains' auth to aaa-ldap using: #| ovirt-engine-kerbldap-migration-tool --domain baz.foo.bar --cacert /tmp/ca.crt --apply | All OK, no

[ovirt-users] oVirt 3.6 AAA LDAP cannot not log in when end of UPN is different from domain base

Hi! Starting new thread instead of jacking someone else´s. Managed to migrate from old 'engine-manage-domains' auth to aaa-ldap using: # ovirt-engine-kerbldap-migration-tool --domain baz.foo.bar --cacert /tmp/ca.crt --apply All OK, no errors, but cannot log in: #

Re: [ovirt-users] ovirt 3.6 node

Hey Johan, you can find the latest ISO here: http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.6_create-iso-el7_merged/ - fabian On Sun, Mar 6, 2016 at 3:13 PM, Johan Kooijman wrote: > Hi all, > > I can't seem to find ovirt 3.6 node ISO. Is there a specific reason for >

[ovirt-users] ovirt 3.6 node

Hi all, I can't seem to find ovirt 3.6 node ISO. Is there a specific reason for this? I have the issue with 3.5 (ovirt-node-iso-3.5-0.201502231653.el7.iso) that I can't do live merge on machines installed with ovirt node. -- Met vriendelijke groeten / With kind regards, Johan Kooijman

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

When upgrading the hosts I did add another Cluster 3.6 to be able to keep my VMs running ( as I couldn't connect el6 and el7 hosts in 1 cluster ). I was afaraid to lose my hosted-engine during upgrade, so kept hosted-engine as long as possible on old version. I then switched old Cluster to 3.6 and

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Tue, Feb 9, 2016 at 12:10 PM, Simone Tiraboschi wrote: > > > On Tue, Feb 9, 2016 at 11:57 AM, Paul Groeneweg | Pazion > wrote: > >> >> When upgrading the hosts >> I did add another Cluster 3.6 to be able to keep my VMs running ( as I >> couldn't connect

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Tue, Feb 9, 2016 at 9:45 AM, Paul Groeneweg | Pazion wrote: > I have added 2 logs from 2 hosts > > Both the hosts are just additional host: 2016-02-07 20:32:30 DEBUG otopi.plugins.otopi.dialog.human human.queryString:156 query OVEHOSTED_ADDITIONAL_HOST 2016-02-07 20:32:30

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Tue, Feb 9, 2016 at 11:57 AM, Paul Groeneweg | Pazion wrote: > > When upgrading the hosts > I did add another Cluster 3.6 to be able to keep my VMs running ( as I > couldn't connect el6 and el7 hosts in 1 cluster ). > The approach was right since you cannot mix hosts with el6

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Tue, Feb 9, 2016 at 10:53 AM, Paul Groeneweg | Pazion wrote: > The original (first host) was removed ( about a year a go I removed this > one ) and it is also removed from hosted-engine --vm-status overview. > > I ran 'hosted-engine --deploy' again on all the hosts because I

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

The original (first host) was removed ( about a year a go I removed this one ) and it is also removed from hosted-engine --vm-status overview. I ran 'hosted-engine --deploy' again on all the hosts because I upgraded all hosts to EL7. ( I have als ran engine-setup for the upgrade ) How can I fix

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

For the record, my hosted-engine still runs el6. The hosts now run el7. This means I need to save backup and restore to a new instance? I do need to upgrade hosted-engine to el7? I don't get the overall picture, but what I find strange is, the spUUID in my hosted-engine.conf is not found. When I

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Mon, Feb 8, 2016 at 11:25 PM, Paul Groeneweg | Pazion wrote: > > I found vdsClient and ran a few commands. > > [root@geisha-1 ~]# vdsClient -s 0 getStorageDomainInfo > 88b69eba-ef4f-4dbe-ba53-20dadd424d0e > > uuid = 88b69eba-ef4f-4dbe-ba53-20dadd424d0e > > version = 3 > > role

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

On Tue, Feb 9, 2016 at 11:51 AM, Paul Groeneweg | Pazion wrote: > For the record, my hosted-engine still runs el6. > You can run the 3.6 engine also on el6 so no issue there. > The hosts now run el7. > To reach 3.6 cluster compatibility level you need to upgrade all the hosts

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

Thanks for your response. I have reverted the commented entries and restarted ovirt-ha-agent. Now status on the daemon gives the error again: http://screencast.com/t/DCZo6QJM1 The hosted engine domain is not shown in the web storage overview... When I start import it shows a warning:

Re: [ovirt-users] ovirt 3.6 hostedengine.metadata, missing OVF_STORE

Update: 1. I was able to remove the warnirngs about the not found ovf / vm.conf by commenting the conf_volume_UUID, conf_image_UUID entries in the hosted-engine.conf. After a restart of the ovirt-ha-agent the errors were gone. ( I believe this is not a permanent solution ). 2. This morning I

  1   2   >