Re: [ovirt-users] unable to set group on volume
Hi Kasturi, Yes the ‘/var/lib/glusterd/virt’ was missing from my system. I’m running ovirt on a RHEL - 7 - 3.1611.el7.centos on a physical machine. The mistake is due to inexperience on my part. I stated earlier that I completely removed glusterfs and reinstalled it in order to recreate the ‘/var/lib/glusterd/virt’. The way I was uninstalling and reinstalling gluster must have been incorrect. I ran ‘rpm -qa |grep gluster’ to get a list of the gluster components installed. I then proceeded to remove each one on the list. Then I ran a ‘yum install glusterfs* vdsm-gluster’ since I’m not sure which rpm provides the ‘/var/lib/glusterd/virt’ file. I’m not sure if this installs too many components but after that, the ‘/var/lib/glusterd/virt’ was present on my the system. I was able to proceed normally after that. Thanks for taking the time to engage in my question, Joel On May 11, 2017 2:20 AM, "knarra"wrote: > On 05/10/2017 10:47 PM, Joel Diaz wrote: > > I though I would try something different so I removed the key group and > value virt when creating the volumes. I was able to create the volumes. I > stopped the data volume. I then tried to set the volume group by issuing a > "gluster volume data group virt" > > Still get "unable to open file '/var/lib/gluster/Virt'. Error: No such > file or directory. > > I don't know if I should continue with the setup until I can set this > value. > > Please let me know if I can provide some logs to identify the issue. > > Thanks for your help, > > Joel > > On May 10, 2017 6:57 AM, "Joel Diaz" wrote: > > Thanks for the reply. > > The file is empty. I created the file by issuing a "touch > /var/lib/glusterd/groups/virt" > > The first time I attempted to set the group volume, the error was that the > file was missing. I read a bug report that advised to remove and reinstall > the gluster package in order to properly recreate the file. Since that did > not work, I created it manually. > > Thank you, > > Joel > > Hi Joel, > > Do you have this file present on the system ? This file will be > present when glusterfs is installed. I would like to first understand how > is it missing on your system? The error is because i see that you do not > have the file present there. Can you please paste output of "ls -l > /var/lib/glusterd/groups/virt" ? > > > Thanks > kasturi > > > On Wed, May 10, 2017 at 2:12 AM, knarra wrote: > >> On 05/10/2017 06:37 AM, Joel Diaz wrote: >> >> Hello ovirt users, >> >> First off all, thanks for your work. I've been using the software for a >> few months and the experience has been great. >> >> I'm having a hard time trying to set the group on a glusterfs volume >> >> PLAY [master] ** >> >> >> TASK [Sets options for volume] ** >> *** >> failed: [192.168.170.141] (item={u'key': u'group', u'value': u'virt'}) => >> {"failed": true, "item": {"key": "group", "value": "virt"}, "msg": >> "'/var/lib/glusterd/groups/virt' file format not valid.\n"} >> >> From this error it looks like the virt file format is not valid? Can you >> please paste the contents of this file? >> >> changed: [192.168.170.141] => (item={u'key': u'storage.owner-uid', >> u'value': u'36'}) >> changed: [192.168.170.141] => (item={u'key': u'storage.owner-gid', >> u'value': u'36'}) >> changed: [192.168.170.141] => (item={u'key': u'network.ping-timeout', >> u'value': u'30'}) >> changed: [192.168.170.141] => (item={u'key': >> u'performance.strict-o-direct', u'value': u'on'}) >> changed: [192.168.170.141] => (item={u'key': u'network.remote-dio', >> u'value': u'off'}) >> changed: [192.168.170.141] => (item={u'key': >> u'cluster.granular-entry-heal', u'value': u'enable'}) >> to retry, use: --limit @/tmp/tmpdTWQ8B/gluster-volume-set.retry >> >> PLAY RECAP >> * >> 192.168.170.141: ok=0changed=0unreachable=0 >> failed=1 >> >> I've tried to remove remove glusterfs, wiping the glusterfs >> configurations and reinstalling the service. >> >> Any help would be appreciated. >> >> Thank you, >> >> Joel >> >> >> ___ >> Users mailing >> listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users >> >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to set group on volume
I though I would try something different so I removed the key group and value virt when creating the volumes. I was able to create the volumes. I stopped the data volume. I then tried to set the volume group by issuing a "gluster volume data group virt" Still get "unable to open file '/var/lib/gluster/Virt'. Error: No such file or directory. I don't know if I should continue with the setup until I can set this value. Please let me know if I can provide some logs to identify the issue. Thanks for your help, Joel On May 10, 2017 6:57 AM, "Joel Diaz"wrote: Thanks for the reply. The file is empty. I created the file by issuing a "touch /var/lib/glusterd/groups/virt" The first time I attempted to set the group volume, the error was that the file was missing. I read a bug report that advised to remove and reinstall the gluster package in order to properly recreate the file. Since that did not work, I created it manually. Thank you, Joel On Wed, May 10, 2017 at 2:12 AM, knarra wrote: > On 05/10/2017 06:37 AM, Joel Diaz wrote: > > Hello ovirt users, > > First off all, thanks for your work. I've been using the software for a > few months and the experience has been great. > > I'm having a hard time trying to set the group on a glusterfs volume > > PLAY [master] > ** > > TASK [Sets options for volume] ** > *** > failed: [192.168.170.141] (item={u'key': u'group', u'value': u'virt'}) => > {"failed": true, "item": {"key": "group", "value": "virt"}, "msg": > "'/var/lib/glusterd/groups/virt' file format not valid.\n"} > > From this error it looks like the virt file format is not valid? Can you > please paste the contents of this file? > > changed: [192.168.170.141] => (item={u'key': u'storage.owner-uid', > u'value': u'36'}) > changed: [192.168.170.141] => (item={u'key': u'storage.owner-gid', > u'value': u'36'}) > changed: [192.168.170.141] => (item={u'key': u'network.ping-timeout', > u'value': u'30'}) > changed: [192.168.170.141] => (item={u'key': u'performance.strict-o-direct', > u'value': u'on'}) > changed: [192.168.170.141] => (item={u'key': u'network.remote-dio', > u'value': u'off'}) > changed: [192.168.170.141] => (item={u'key': u'cluster.granular-entry-heal', > u'value': u'enable'}) > to retry, use: --limit @/tmp/tmpdTWQ8B/gluster-volume-set.retry > > PLAY RECAP > * > 192.168.170.141: ok=0changed=0unreachable=0failed=1 > > I've tried to remove remove glusterfs, wiping the glusterfs configurations > and reinstalling the service. > > Any help would be appreciated. > > Thank you, > > Joel > > > ___ > Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to set group on volume
Thanks for the reply. The file is empty. I created the file by issuing a "touch /var/lib/glusterd/groups/virt" The first time I attempted to set the group volume, the error was that the file was missing. I read a bug report that advised to remove and reinstall the gluster package in order to properly recreate the file. Since that did not work, I created it manually. Thank you, Joel On Wed, May 10, 2017 at 2:12 AM, knarrawrote: > On 05/10/2017 06:37 AM, Joel Diaz wrote: > > Hello ovirt users, > > First off all, thanks for your work. I've been using the software for a > few months and the experience has been great. > > I'm having a hard time trying to set the group on a glusterfs volume > > PLAY [master] > ** > > TASK [Sets options for volume] ** > *** > failed: [192.168.170.141] (item={u'key': u'group', u'value': u'virt'}) => > {"failed": true, "item": {"key": "group", "value": "virt"}, "msg": > "'/var/lib/glusterd/groups/virt' file format not valid.\n"} > > From this error it looks like the virt file format is not valid? Can you > please paste the contents of this file? > > changed: [192.168.170.141] => (item={u'key': u'storage.owner-uid', > u'value': u'36'}) > changed: [192.168.170.141] => (item={u'key': u'storage.owner-gid', > u'value': u'36'}) > changed: [192.168.170.141] => (item={u'key': u'network.ping-timeout', > u'value': u'30'}) > changed: [192.168.170.141] => (item={u'key': u'performance.strict-o-direct', > u'value': u'on'}) > changed: [192.168.170.141] => (item={u'key': u'network.remote-dio', > u'value': u'off'}) > changed: [192.168.170.141] => (item={u'key': u'cluster.granular-entry-heal', > u'value': u'enable'}) > to retry, use: --limit @/tmp/tmpdTWQ8B/gluster-volume-set.retry > > PLAY RECAP > * > 192.168.170.141: ok=0changed=0unreachable=0failed=1 > > I've tried to remove remove glusterfs, wiping the glusterfs configurations > and reinstalling the service. > > Any help would be appreciated. > > Thank you, > > Joel > > > ___ > Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to set group on volume
On 05/10/2017 06:37 AM, Joel Diaz wrote: Hello ovirt users, First off all, thanks for your work. I've been using the software for a few months and the experience has been great. I'm having a hard time trying to set the group on a glusterfs volume PLAY [master] ** TASK [Sets options for volume] * failed: [192.168.170.141] (item={u'key': u'group', u'value': u'virt'}) => {"failed": true, "item": {"key": "group", "value": "virt"}, "msg": "'/var/lib/glusterd/groups/virt' file format not valid.\n"} From this error it looks like the virt file format is not valid? Can you please paste the contents of this file? changed: [192.168.170.141] => (item={u'key': u'storage.owner-uid', u'value': u'36'}) changed: [192.168.170.141] => (item={u'key': u'storage.owner-gid', u'value': u'36'}) changed: [192.168.170.141] => (item={u'key': u'network.ping-timeout', u'value': u'30'}) changed: [192.168.170.141] => (item={u'key': u'performance.strict-o-direct', u'value': u'on'}) changed: [192.168.170.141] => (item={u'key': u'network.remote-dio', u'value': u'off'}) changed: [192.168.170.141] => (item={u'key': u'cluster.granular-entry-heal', u'value': u'enable'}) to retry, use: --limit @/tmp/tmpdTWQ8B/gluster-volume-set.retry PLAY RECAP * 192.168.170.141: ok=0changed=0 unreachable=0failed=1 I've tried to remove remove glusterfs, wiping the glusterfs configurations and reinstalling the service. Any help would be appreciated. Thank you, Joel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] unable to set group on volume
Hello ovirt users, First off all, thanks for your work. I've been using the software for a few months and the experience has been great. I'm having a hard time trying to set the group on a glusterfs volume PLAY [master] ** TASK [Sets options for volume] * failed: [192.168.170.141] (item={u'key': u'group', u'value': u'virt'}) => {"failed": true, "item": {"key": "group", "value": "virt"}, "msg": "'/var/lib/glusterd/groups/virt' file format not valid.\n"} changed: [192.168.170.141] => (item={u'key': u'storage.owner-uid', u'value': u'36'}) changed: [192.168.170.141] => (item={u'key': u'storage.owner-gid', u'value': u'36'}) changed: [192.168.170.141] => (item={u'key': u'network.ping-timeout', u'value': u'30'}) changed: [192.168.170.141] => (item={u'key': u'performance.strict-o-direct', u'value': u'on'}) changed: [192.168.170.141] => (item={u'key': u'network.remote-dio', u'value': u'off'}) changed: [192.168.170.141] => (item={u'key': u'cluster.granular-entry-heal', u'value': u'enable'}) to retry, use: --limit @/tmp/tmpdTWQ8B/gluster-volume-set.retry PLAY RECAP * 192.168.170.141: ok=0changed=0unreachable=0failed=1 I've tried to remove remove glusterfs, wiping the glusterfs configurations and reinstalling the service. Any help would be appreciated. Thank you, Joel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users