Re: [SOGo] Misunderstanding SOGo
Hello Am 2013-07-06 01:52, schrieb Mark Madere: if your users login with their full email address (i.e.: u...@host.com), you do not need to set these parameters: SOGoEnableDomainBasedUID SOGoDomainsVisibility SOGoLoginDomains These parameters effect the login page only. You may exclude them from your config. That is not correct for SOGoDomainsVisibility. This option defines, whether the users of one domain can see the global address book of another domain. This affects sharing and autocompletion when writing emails or inviting people to an event. So e.g. if you have a domain per department and you want to have all addresses visible for each user in your company, then you have to set this option. Kind regards, Christian Mack -- Christian Mack Gruppe Informationsdienste Rechenzentrum Universität Konstanz -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
Thanks Christian, for the clarification. I use SOGo SxS with Groupoffice and I find that Groupoffice allows me to have a dropdown of the domains available on the system so that a user only enters their first part of the e-mail address and then chooses the domain from the dropdown.However, where as Groupoffice uses IMAP authentication, I don't know how SOGo achieves the authentication. For SOGo I have to enter the full e-mail address even despite having a dropdown of the domains. In this respect I still find groupoffice easier to use than SOGo - so far. I am sticking to SOGo in order to see if one day I am able to get funambol working on FreeBSD. Right now it doesn't compile. On 23 July 2013 11:50, Christian Mack christian.m...@uni-konstanz.de wrote: Hello Am 2013-07-06 01:52, schrieb Mark Madere: if your users login with their full email address (i.e.: u...@host.com), you do not need to set these parameters: SOGoEnableDomainBasedUID SOGoDomainsVisibility SOGoLoginDomains These parameters effect the login page only. You may exclude them from your config. That is not correct for SOGoDomainsVisibility. This option defines, whether the users of one domain can see the global address book of another domain. This affects sharing and autocompletion when writing emails or inviting people to an event. So e.g. if you have a domain per department and you want to have all addresses visible for each user in your company, then you have to set this option. Kind regards, Christian Mack -- Christian Mack Gruppe Informationsdienste Rechenzentrum Universität Konstanz -- users@sogo.nu https://inverse.ca/sogo/lists -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
On 07/23/13 11:23, Odhiambo Washington wrote: Thanks Christian, for the clarification. I use SOGo SxS with Groupoffice and I find that Groupoffice allows me to have a dropdown of the domains available on the system so that a user only enters their first part of the e-mail address and then chooses the domain from the dropdown.However, where as Groupoffice uses IMAP authentication, I don't know how SOGo achieves the authentication. For SOGo I have to enter the full e-mail address even despite having a dropdown of the domains. In this respect I still find groupoffice easier to use than SOGo - so far. I am sticking to SOGo in order to see if one day I am able to get funambol working on FreeBSD. Right now it doesn't compile. I am using the precompiled version on OpenBSD and it works very well, I think it should run on FreeBSD too: http://sourceforge.net/projects/funambol/files/bundle/v10/funambol-10.0.3.tgz/download Cheers Giovanni -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
Hi Giovanni, Sorry, I meant openchange, not funambol. It was a slip of the brain, transmitted to the fingures:) Do you also have OpenChange installed? On FreeBSD, we have a port (mail/libmapi) which is our openchange equiv. It is stuck on COCHRANE, but doesn't even compile on my FreeBSD It's actually the show stopper I encountered. On 23 July 2013 12:30, Giovanni Bechis giova...@bigio.snb.it wrote: On 07/23/13 11:23, Odhiambo Washington wrote: Thanks Christian, for the clarification. I use SOGo SxS with Groupoffice and I find that Groupoffice allows me to have a dropdown of the domains available on the system so that a user only enters their first part of the e-mail address and then chooses the domain from the dropdown.However, where as Groupoffice uses IMAP authentication, I don't know how SOGo achieves the authentication. For SOGo I have to enter the full e-mail address even despite having a dropdown of the domains. In this respect I still find groupoffice easier to use than SOGo - so far. I am sticking to SOGo in order to see if one day I am able to get funambol working on FreeBSD. Right now it doesn't compile. I am using the precompiled version on OpenBSD and it works very well, I think it should run on FreeBSD too: http://sourceforge.net/projects/funambol/files/bundle/v10/funambol-10.0.3.tgz/download Cheers Giovanni -- users@sogo.nu https://inverse.ca/sogo/lists -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
On 07/23/13 12:24, Odhiambo Washington wrote: Hi Giovanni, Sorry, I meant openchange, not funambol. It was a slip of the brain, transmitted to the fingures:) Do you also have OpenChange installed? On FreeBSD, we have a port (mail/libmapi) which is our openchange equiv. It is stuck on COCHRANE, but doesn't even compile on my FreeBSD It's actually the show stopper I encountered. First we have to finish porting samba4, then we will try with OpenChange, ... Cheers Giovanni -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
On FreeBSD, there is Samba-4.0.7 at the moment, which is the latest. I think the port maintainer for libmapi is perhaps busy with other things to find time to update:) On 23 July 2013 13:30, Giovanni Bechis giova...@bigio.snb.it wrote: On 07/23/13 12:24, Odhiambo Washington wrote: Hi Giovanni, Sorry, I meant openchange, not funambol. It was a slip of the brain, transmitted to the fingures:) Do you also have OpenChange installed? On FreeBSD, we have a port (mail/libmapi) which is our openchange equiv. It is stuck on COCHRANE, but doesn't even compile on my FreeBSD It's actually the show stopper I encountered. First we have to finish porting samba4, then we will try with OpenChange, ... Cheers Giovanni -- users@sogo.nu https://inverse.ca/sogo/lists -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Misunderstanding SOGo
Hi Odhiambo, if your users login with their full email address (i.e.: u...@host.com), you do not need to set these parameters: SOGoEnableDomainBasedUID SOGoDomainsVisibility SOGoLoginDomains These parameters effect the login page only. You may exclude them from your config. You can name your domains anything you want in your config. I ran into a problem having the top entry, SOGoMailDomain, and id the same. I currently use this strategy: -DOMAIN- = { SOGoMailDomain = DOMAIN; SOGoUserSources = ( { id = public-DOMAIN; } ); }; here is a sample from my config: -hooktest2.com- = { SOGoMailDomain = hooktest2.com; SOGoUserSources = ( { CNFieldName = cn; IDFieldName = mail; UIDFieldName = mail; baseDN = mvd=hooktest2.com,o=domains,dc=expanding; bindDN = cn=Manager,dc=expanding; bindPassword = *; canAuthenticate = YES; displayName = Share Users; filter = (objectClass='MaxwellMailAccount' AND accountActive='TRUE' AND delete='FALSE'); hostname = mail.X.com; id = public-hooktest2.com; isAddressBook = YES; port = 389; type = ldap; MailFieldNames = (mail,description); } ); }; Mark Original Message Subject: [SOGo] Misunderstanding SOGo Date: Monday, July 1, 2013 05:15 AM CDT From: Odhiambo Washington odhia...@gmail.com Reply-To: users@sogo.nu To: users@sogo.nu I have installed SOGo on one of the many FreeBSD boxes that I manage and I am kinda failing to understand something when it comes to Multi-domains setup. Here are my clueless moments: First, my config is availavle here - http://goo.gl/lpKZk This is a virtual domains setup, with MySQL. Users authenticate with username@domain as userid, with their password. The following parameters confuse the hell out of me: SOGoEnableDomainBasedUID = YES; SOGoDomainsVisibility = ((domain1,domain2)); SOGoLoginDomains = (domain1,domain1); (a) Since my users already login with full e-mail address as c_uid, I suppose SOGoEnableDomainBasedUID is not applicable in my case, right?? (b) SOGoLoginDomains - this gives me a dropdownlist from the login page, but then I cannot just enter username (without the @domain), as authentication fails. Is this parameter expected to concat username and @domain selected from the dropdownlist, or where am I going wrong? (c) SOGoDomainsVisibility Parameter used to set domains visible among themselves. For what purpose is this visibility? When defining specific domains, can I use a shortname to introduce the domain, much like a placeholder, then define the full domain name in SOGoMailDomain, like below, or must I use FQDN everywhere? domains = { crownkenya = { SOGoMailDomain = crownkenya.com; . -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- users@sogo.nu https://inverse.ca/sogo/lists -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] Misunderstanding SOGo
I have installed SOGo on one of the many FreeBSD boxes that I manage and I am kinda failing to understand something when it comes to Multi-domains setup. Here are my clueless moments: First, my config is availavle here - http://goo.gl/lpKZk This is a virtual domains setup, with MySQL. Users authenticate with username@domain as userid, with their password. The following parameters confuse the hell out of me: SOGoEnableDomainBasedUID = YES; SOGoDomainsVisibility = ((domain1,domain2)); SOGoLoginDomains = (domain1,domain1); (a) Since my users already login with full e-mail address as c_uid, I suppose SOGoEnableDomainBasedUID is not applicable in my case, right?? (b) SOGoLoginDomains - this gives me a dropdownlist from the login page, but then I cannot just enter username (without the @domain), as authentication fails. Is this parameter expected to concat username and @domain selected from the dropdownlist, or where am I going wrong? (c) SOGoDomainsVisibility Parameter used to set domains visible among themselves. For what purpose is this visibility? When defining specific domains, can I use a shortname to introduce the domain, much like a placeholder, then define the full domain name in SOGoMailDomain, like below, or must I use FQDN everywhere? domains = { crownkenya = { SOGoMailDomain = crownkenya.com; . -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- users@sogo.nu https://inverse.ca/sogo/lists