James,
I deployed CS with ISCSI and CLVM it worked pretty well.
Using the following two items Marcus Sorensen makes it pretty easy to setup.
http://www.slideshare.net/MarcusLSorensen/cloud-stack-clvm
https://www.youtube.com/watch?v=wyv9-87CNZM
Jeremy
-Original Message-
From: James
at a clean install of cloudstack-management and my
cloudstack-agent is stopped on my two kvm hosts.
My storage is on eth1 and public is on cloudbr0 which is bridged off eth0.
Jeremy Peterson
Is it possible to do a multiple VPC IPsec tunnel?
I have CloudStack 4.5.1 installed and VPC works find connecting to PfSense
physical firewall on site at a location.
Now I have a second location that would also like a IPsec tunnel to the hosted
servers in CloudStack.
I am using Advanced
to be the only IP address?
The virtual router has eth3 with the new ip address I could just ifdown eth2
and change the default route in there but that does not clean it up.
Jeremy Peterson
the host and storage utilization and allocates the host
and storage based on the availability of resources for vm deployment.
What do you mean by VM utilization?
-Sanjeev
On Thu, May 21, 2015 at 6:23 AM, Jeremy Peterson jpeter...@acentek.net
wrote:
Is it possible to do a multiple VPC IPsec tunnel
Tomcat/6.0.24
[cid:image001.png@01D0CC5A.BFF1EB50]
I am remote at this time and that is the last couple lines of catalina.out
Anyone have any ideas?
Jeremy Peterson
(probably dropped)
What says the cloudstack-management.log file when your restart the
service ?
(your CS version?)
On 01/08/2015 19:06, Jeremy Peterson wrote:
So out server farm is hosted in our corporate ESX environment.
Our ESX hosts are over provisioned and we are waiting
iSCSI storage LUN's w/4 multipaths for primary
FreeNAS NFS for secondary
Jeremy Peterson
the hypervisor you are patching.
As a last resort, you could just shutdown the remaining instances and reboot
the hypervisor and restart stopped instances once the hypervisor is back !
Yiping
On 10/30/15, 6:06 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
>I was able to mo
30-Oct-2015, at 2:11 AM, Jeremy Peterson <jpeter...@acentek.net> wrote:
>
> http://pastebin.com/jpPbsJb4
>
> I put a host in maintenance mode to apply XenServer patches and it gets all
> but 5 vm's migrated and now if I cancel maintenance mode and try to manually
> move fr
e to put host into maintenance mode. Unable to
> migrate VM
>
> The errors are originating on XenServer Flex-Xen1, check the SMlog for clues.
> Also check if the VMs on that host are running fine.
>
>
> > On 30-Oct-2015, at 2:11 AM, Jeremy Peterson <jpeter...@acentek.ne
We are looking at a new monitoring software for our corporate environment.
Management has requested that CloudStack and XenServer be added to that
monitoring software. One of the software titles we are looking at is DataDogHQ.
https://bigpanda.io/monitoringscape/
Does anyone use a 3rd party
CentOS rpm's) as well as SNMP. Works
reliable except we haven't written any checks for VM metrics so far.
Am Freitag, den 16.10.2015, 21:25 + schrieb Jeremy Peterson:
> We are looking at a new monitoring software for our corporate environment.
> Management has requested tha
dStack,
and Xenserver which should give you deep monitoring of both.
I say shameless, because I am the Zenoss Community Manager.
On Fri, Oct 16, 2015 at 5:25 PM, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> We are looking at a new monitoring software for our corporate
> environment. Manage
Have you looked into the DB for snapshots?
SELECT * FROM cloud.snapshots where status="Allocated" or "BackedUp";
I am in the process of looking for a way to quickly search the db for all
volumes from a curtain domain_id and validating that they have a recurring
snapshot from the night before.
.
Jeremy
From: Jeremy Peterson <jpeter...@acentek.net>
Sent: Saturday, August 29, 2015 8:43 PM
To: users@cloudstack.apache.org
Subject: RE: VPC VPN Connectivity Issues
I have set firewall rules to allow 192.168.71.0/24 And 10.1.2.0/24. Still no
In
you already solve your problem?
Not sure if it is possible to use the IPSec tunnels from remote VPN. Firewall
might be too strict, but haven't looked yet.
Regards, Remi
Sent from my iPhone
> On 29 Aug 2015, at 17:00, Jeremy Peterson <jpeter...@acentek.net> wrote:
>
> I am
---
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Tuesday, September 1, 2015 2:19 PM
To: users@cloudstack.apache.org
Subject: Re: VPC VPN Connectivity Issues
So I have yet to see anyone respond to this.
I will be looking more into it tomorrow but if anyone has any suggestions tha
On Sep 9, 2015, at 7:47 PM, Jeremy Peterson <jpeter...@acentek.net> wrote:
>
> So I'm still looking into this has anyone ever tried this?
>
> Do you have anyone I can talk to?
>
> I've been asking since 8.29.2015
>
> I guess the issue is on a Mac since my VPN
Subject: Re: VPC VPN Connectivity Issues
ok, I also do that, route all traffic over VPN, but in that case, you need to
know Internet stops working on your laptop :) not nice, but good security :)
On 10 September 2015 at 14:15, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> I firs
work as expected.
I don't have a Mac I can test with so I was hoping someone here would have any
advise.
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Tuesday, September 8, 2015 8:12 AM
To: users@cloudstack.apache.org
Subject: RE: VPC VPN
We are using XenServer 6.5 ACS 4.5 iSCSI LUN's for Primary and when I enabled
multipathing I enabled maintenance mode for the LUN in question and I see all
vm's migrate to another they did not reboot or shutdown. Once in maintenance I
was able to remove it from ACS and XenServer and then
I don't use XenServer maintenance mode until after CloudStack has put the Host
in maintenance mode.
When you initiate maintenance mode from the host rather than CloudStack the db
does not know where the VM's are and your UUID's get jacked.
CS is your brains not the hypervisor.
Maintenance in
We use WHMCS and a custom built module. The module will integrate with
cloudstack to add domains networks users vm's from template and allow outbound
traffic. We integrate with the API. I will talk to my co worker who built it
and see if he can respond if anyone wants to know more about it.
I don't see any attachments can you create a pastebin. That's easier to look
through as I think attachments are removed before being sent to user group.
Jeremy
Original message
From: Nezar Madbouh
Date: 3/14/2016 6:38 PM (GMT-06:00)
To:
With XenServer I add my news hosts to the in XenCenter then once all hosts have
been added I go into Cloudstack -> Infrastructure -> Hosts and add one host and
the rest of my new hosts are added. I believe it’s the same with vmware.
Jeremy
-Original Message-
From: Semih Tolga DEMİR
Gabriel's questions are valid. A lot of people use XenServer so ask away, but
NIC count on the hosts will help someone guide you through some issues.
I know one of the first issues I had was the storage network since I was using
ISCSI I wasn't accounting for what storage meant to cloudstack.
Jeremy Peterson:
> So I am running XenCenter and I am trying to create a second pool to
> add hosts to but when I join the pool the errors are coming up
>
> The server joining the pool must have a physical management NIC (i.e.
> the management NIC must not be on a VLAN or bond
I changed my "name" of the Box 4+5 to MGMT to match what my pool has and same
thing error.
Jeremy
-Original Message-----
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Thursday, September 8, 2016 10:03 AM
To: users@cloudstack.apache.org
Subject: RE: Adding Hosts to
Ok so do I have to change my existing pool hosts to have a bond? Is that the
issue ?
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Thursday, September 8, 2016 10:41 AM
To: users@cloudstack.apache.org
Subject: RE: Adding Hosts to XenCenter Pool
So I am running XenCenter and I am trying to create a second pool to add hosts
to but when I join the pool the errors are coming up
The server joining the pool must have a physical management NIC (i.e. the
management NIC must not be on a VLAN or bonded PIF)
I have 6 nics
2 on board 1GB NIC (
IPs
for Xen3 after it has joint the pool.
Yiping
PS: if this is a brand new pool, I would recommend that you rebuild the pool
so that the mgmt. NIC is also a bond.
On 9/8/16, 8:43 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
Ok so do I have to change my existing po
ond4+5, and you can manually assign IPs to other newly
created bonds on Xen4.
Yiping
On 9/8/16, 11:08 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
Xen4 is before joining the pool.
My question is how will I have mgmt? I have a port channel setup for the
bonded
Yiping,
Thanks a ton for going through this with me. It's awesome when you get help on
a user group.
Sent from my Verizon, Samsung Galaxy smartphone
Original message
From: Jeremy Peterson <jpeter...@acentek.net>
Date: 9/8/16 5:52 PM (GMT-06:00)
To:
In the Database you can change it.
My New Cluster name with id=1 will be called Cluster1.
UPDATE `cloud`.`cluster` SET `name`='Cluster1' WHERE `id`='1';
Tell me if I'm wrong but there is no option in the UI to make this change so I
make it in the DB.
Jeremy
-Original Message-
From:
I came from using Solus VM to switching to CloudStack.
In SolusVM you are used to Nodes which are a hypervisor. We used KVM but
talked to the group here and found ShapeBlue who sent us on looking into Tim
Mackey and XenServer. I HIGHLY suggest you look into XenServer. It has helped
us
I have a CS environment setup and I'd like to know how to call CloudStack to
create a VM with sockets and core distinction.
Right now it seems to be created all vms with x number of sockets with 1 core
per socket.
Hypervisor : XenServer
CS Version : 4.5.0
Any ideas?
Jermy
with this?
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Tuesday, March 7, 2017 8:52 AM
To: users@cloudstack.apache.org
Subject: Is it possible... To set Dynamically Scalable after VM was created
I am running CS 4.5.0
XenServer 6.5
Dynamically Scalable
8, 2017 at 12:19 PM, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> Does anyone know if I can just change dynamically_scalable from 0 to
> 1 in cloud.vm_instance ?
>
> I am building a temp server now from ISO and will build out windows
> 2016 and then shutting dow
I am running CS 4.5.0
XenServer 6.5
Dynamically Scalable No
OS Type Windows Server 2012 R2 (64-bit)
Hypervisor XenServer
Original XS Version is 6.1+Yes
Is it possible to set that to Yes after the fact that the VM was deployed and
has been active for
Ok so I am back at the users again.
I had 1 VM lock up today and was forced to issue a restart as the OS was non
responsive.
After powering off the VM bounced around between hosts and ultimately stopped
and failed with an insufficient resources error.
I looked around in XenServer and found
r cloudstack to create a new SSVM.
~Rajani
http://cloudplatform.accelerite.com/
On Thu, Jun 8, 2017 at 1:11 AM, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> Probably agreed.
>
> But I ran toolstack restart on all hypervisors and v-3193 just tried to
> create and fail along
b-148144/job-148145) Done with run of VM
work job: com.cloud.vm.VmWorkStart for VM 446, job origin: 148144
2017-06-21 13:10:19,332 ERROR [c.c.v.VmWorkJobDispatcher]
(Work-Job-Executor-100:ctx-e1276898 job-148144/job-148145) Unable to complete
AsyncJobVO {id:148145, userId: 2, accountId: 2, instan
0 Hyperv 0
Active 0 0
10 routing-10 SystemVM Template (LXC)
5bb9e71c-bb72-11e4-8c76-0050569b16620 0 SYSTEM 0 64
http://download.cloud.com/templates/4.5/systemvm64template-4.5-kvm.qcow2.bz2
QCOW2
) The last
host of this VM is in avoid set
All oddities.
So I did a force reconnect on all 6 hosts and enabled the two hosts that were
pending updates.
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Tuesday, June 20, 2017 12:33 PM
To: users
SAN1-LUN0","id":8,"poolType":"PreSetup","host":"localhost","path":"/FlexSAN1-LUN0","port":0,"url":"PreSetup://localhost/FlexSAN1-LUN0/?ROLE=Primary=FlexSAN1-LUN0"}},"name":"ROOT-22411&qu
primary storage directly from command line on your
XenServers – so can you check all those paths on your primary storage pools?
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 22/06/2017, 17:22, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
1. I downloaded the
: [1]
2017-06-26 08:51:22,066 DEBUG [c.c.d.FirstFitPlanner]
(Work-Job-Executor-4:ctx-17e6813f job-588/job-183327 ctx-a59fc211) No clusters
found after removing disabled clusters and clusters in avoid list, returning.
No change.
Jeremy
-Original Message-
From: Jeremy Peterson
-302e3fd5 job-1042/job-183149 ctx-835c48e1) Checking
if storage pool is suitable, name: null ,poolId: 6
2017-06-26 08:14:19,372 DEBUG [o.a.c.s.a.AbstractStoragePoolAllocator]
(Work-Job-Executor-18:ctx-302e3fd5 job-1042/job-183149 ctx-835c48e1)
StoragePool is in avoid set, skipping this pool
20
mitted primary storage was tidied up ungracefully so you are trying to work
out if the templates are actually still on primary storage like your DB thinks
they are.
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 23/06/2017, 20:09, "Jeremy Peterson" <jpeter...@acentek.net> wro
ould find /var/run/sr-mount/here>/
Under this path you should find the system VM template entries – which are the
same as the “local_path” from template_spool_ref.
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 25/06/2017, 22:17, "Jeremy Peterson" <jpeter...@acentek.net> w
if i am ssh'ed into the xenservers and i do a df -h i do not see those folders
mounted but again i'll check when i get in the morning.
Jeremy
From: Jeremy Peterson <jpeter...@acentek.net>
Sent: Sunday, June 25, 2017 10:15 PM
To:
tup://localhost/FlexSAN2-LUN0/?ROLE=Primary=FlexSAN2-LUN0"}},"name":"ROOT-20685","size":2689602048,"volumeId":25604,"vmName":"s-20685-VM","accountId":1,"format":"VHD","provisioningType":"THIN",&q
the XS host where this VM was
trying to start.
3) Your issues could be storage related – do all SRs (like FlexSAN2-LUN0) show
as connected to your XS hosts in XenCenter? If not can you repair them from
XenCenter?
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 21/06/2017, 19:39, "Jere
all enabled as well as out of
maintenance mode?
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 21/06/2017, 15:13, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
So this morning I reconnected all hosts.
I also disabled my two hosts that need to reboot and powered on
don't have too many hosts, better run on all members including master.
most of i/o related issues squared off by toolstack bounce.
--
Makrand
On Wed, Jun 7, 2017 at 3:01 AM, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> Ok so I pulled this from Sunday morning.
>
> https
it doesn't happen.
--
Erik
tir. 6. jun. 2017 kl. 04.29 skrev Jeremy Peterson
<jpeter...@acentek.net>:
I had an issue Sunday morning with cloudstack 4.9.0 and xenserver 6.5.0.
My hosts stop sending LACP PDU's and caused a network drop to iSCSI primary
storage.
So all my instances recovered
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Tuesday, June 6, 2017 9:23 AM
To: users@cloudstack.apache.org
Subject: RE: Recreating SystemVM's
Thank you all for those responses.
I'll comb through my management-server.log and post a pastebin if I'm
scratching my head
ausing "
HOST_CANNOT_ATTACH_NETWORK"?
~Rajani
http://cloudplatform.accelerite.com/
On Fri, Jun 9, 2017 at 7:00 PM, Jeremy Peterson <jpeter...@acentek.net>
wrote:
> 08:28:43select * from vm_instance where name like 's-%' limit
> 1 7481 row(s) returned0.000 sec / 0
']
Jun 9 09:54:23 Xen3 SM: [13277] pread SUCCESS
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Friday, June 9, 2017 9:53 AM
To: users@cloudstack.apache.org
Subject: RE: Recreating SystemVM's
I am checking SMlog now on all hosts.
Jeremy
...@eaxiom.net]
Sent: Wednesday, June 14, 2017 6:22 PM
To: users@cloudstack.apache.org
Subject: RE: Recreating SystemVM's
Yes,
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Wednesday, June 14, 2017 9:59 PM
To: users@cloudstack.apache.org
Subject: RE: Recreating
?
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Thursday, June 8, 2017 12:47 AM
To: users@cloudstack.apache.org
Subject: Re: Recreating SystemVM's
I'll make that change in the am.
Today I put a host in maintence and rebooted because proxy and secstore
I opened an issue since this is still an issue. CLOUDSTACK-9960
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Sunday, June 11, 2017 9:10 AM
To: users@cloudstack.apache.org
Subject: Re: Recreating SystemVM's
Any other suggestions?
I am going
Is there anyone out there reading these messages?
Am I just not seeing responses?
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Wednesday, June 14, 2017 8:12 AM
To: users@cloudstack.apache.org
Subject: RE: Recreating SystemVM's
I opened
regards,
Swen
-Ursprüngliche Nachricht-
Von: Jeremy Peterson [mailto:jpeter...@acentek.net]
Gesendet: Donnerstag, 15. Juni 2017 01:55
An: users@cloudstack.apache.org
Betreff: RE: Recreating SystemVM's
Hahaha. The best response ever.
I du
Any other suggestions?
I am going to be scheduling to run XenServer updates. But this all points back
to CANNOT_ATTACH_NETWORk.
I've verified nothing is active on the Public IP space that those two VM's were
living on.
Jeremy
From: Jeremy Peterson
I had an issue Sunday morning with cloudstack 4.9.0 and xenserver 6.5.0. My
hosts stop sending LACP PDU's and caused a network drop to iSCSI primary
storage.
So all my instances recovered via HA enabled.
But my console proxy and secondary storage system VM's got stuck in a boot
state that
CloudStack Management = CentOS release 6.9 (Final)
KVM/XEN = XenServer release 6.5.0-90233c
Jeremy
-Original Message-
From: S. Brüseke - proIO GmbH [mailto:s.brues...@proio.com]
Sent: Tuesday, September 12, 2017 7:49 AM
To: users@cloudstack.apache.org
Subject: AW: Quick 1 Question
n my mind I should see that uuid in /dev/mapper/ but I do not.
So I looked at Dag's post and wanted to pull down some info from sql.
+---+-++--+--+------+----++---
-
dag.sonst...@shapeblue.com
www.shapeblue.com
53 Chandos Place, Covent Garden, London WC2N 4HSUK @shapeblue
- Original Message ---
From: Jeremy Peterson <jpeter...@acentek.net>
To: "users@cloudstack.apache.org" <users@cloudstack.apache.org>
Se
Can someone explain the folder structure in secondary storage.
I see /var/cloud_mount/87156045-e430-3fe3-aa4b-3d41c1af8df2
In there I have a bunch of folders
Xen5 snapshots]# ls
10 13 130 153 2 23 390 4 449 480 605 61 64 664 67 684 7 75 8
87 9
Xen5 snapshots]# find . -name
--469b6dcd--8466--3d03--de0e--cc3983e1b6e2-VHD--f5aabea5--2a18--4f24--9f8d--d750a907a699
Sorry I am responding so many times I'm just going through this one by one
trying to figure anything out to recover this data.
Jeremy
-Original Message-
From: Jeremy Peterson [mailto:jpeter
Now looking at Adrian's link
Since the VM is powered off and will not boot due to UUID mismatch.
[root@Flex-Xen5 mapper]# xe vm-list name-label=i-23-223-VM
I don't get anything after issuing the vm-list command for that VM.
Jeremy
-Original Message-
From: Jeremy Peterson
So I need to know if anyone can drop a hint on this.
How can i recover data from cloudstack with xenserver. One of the storage
LUN's got 100% full. I was carefully deleting un-associated disks from the
LUN. A disk that had no VM attached. Then when one of the VM's rebooted it
came online
74 matches
Mail list logo