On Wed, Sep 7, 2022 at 12:28 PM Jehan-Guillaume de Rorthais via Users
wrote:
>
> Hey,
>
> On Wed, 7 Sep 2022 19:12:53 +0900
> 권오성 wrote:
>
> > Hello.
> > I am a student who wants to implement a redundancy system with raspberry pi.
> > Last time, I posted about how to proceed with installation on
Hey,
On Wed, 7 Sep 2022 19:12:53 +0900
권오성 wrote:
> Hello.
> I am a student who wants to implement a redundancy system with raspberry pi.
> Last time, I posted about how to proceed with installation on raspberry pi
> and received a lot of comments.
> Among them, I searched a lot after looking at
Hello.
I am a student who wants to implement a redundancy system with raspberry pi.
Last time, I posted about how to proceed with installation on raspberry pi
and received a lot of comments.
Among them, I searched a lot after looking at the comments saying that
fencing stonith should not be false.
On Mon, 2021-11-01 at 11:22 +0800, 重力加速度 via Users wrote:
> Hello, I have another new problem. Using the cluster environment
> built by centos7.4 and cprosync + pacemaker, the system runs normally
> and suddenly makes an error. The error log is as follows:
>
> How should I solve this problem? My v
On Fri, 2021-09-03 at 12:14 +0800, Roger Zhou via Users wrote:
> On 9/3/21 10:09 AM, 重力加速度 via Users wrote:
> > HELLO!
> > I built a two node corosync + pacemaker cluster, and the main
> > end runs on
> > node0. There are two network ports with the same network segment IP
> > on node0. I
>
On 9/3/21 10:09 AM, ?? via Users wrote:
HELLO!
?0?2 ?0?2 I built a two node corosync + pacemaker cluster?? and the main end runs on
node0. There are two network ports with the same network segment IP on node0. I
This need attention a bit.
"Usually not a good idea to connect two inte
In order to test properly, use firewall rules to drop the corosync traffic.I
remember that this test (ifdown NKC) was inefficient in previous versions of
corosync.
If you wish to be more safe, try to setup ocf:pacemaker:ping.
Best Regards,Strahil Nikolov
On Fri, Sep 3, 2021 at 5:09, 重力加速度
HELLO!
I built a two node corosync + pacemaker cluster?? and the main
end runs on node0. There are two network ports with the same network segment IP
on node0. I created a VIP resource on one of the network ports and specified
the NIC attribute. When I down the network port where the VIP res
Dne 11. 03. 19 v 22:18 Full Name napsal(a):
I have done
pcs resource agents
which returns a long list of resources. Unfortunately, it does not tell you
what standard they are associated with.
'pcs resource list --nodesc' prints a list of resource agents with their
full names, i.e. incl
On 11/03/2019 21:18, Full Name wrote:
I am a complete newbie here, so please bear with me, if I ask something
stupid and/or obvious.
I have been able to deploy and configure the software across three nodes,
each running on a separate Virtual Box VM. Following the steps mentioned in t
On 07/20/2017 12:21 AM, ArekW wrote:
> Hi, How to properly unset a value with pcs? Set to false or null gives error:
>
> # pcs stonith update vbox-fencing verbose=false --force
> or
> # pcs stonith update vbox-fencing verbose= --force
>
> Jul 20 07:14:11 nfsnode1 stonith-ng[11097]: warning: fence
On 07/20/2017 07:21 AM, ArekW wrote:
> Hi, How to properly unset a value with pcs? Set to false or null gives error:
>
> # pcs stonith update vbox-fencing verbose=false --force
> or
> # pcs stonith update vbox-fencing verbose= --force
The latter should be fine actually.
Regards,
Klaus
>
> Jul 20 0
Hi, How to properly unset a value with pcs? Set to false or null gives error:
# pcs stonith update vbox-fencing verbose=false --force
or
# pcs stonith update vbox-fencing verbose= --force
Jul 20 07:14:11 nfsnode1 stonith-ng[11097]: warning: fence_vbox[3092]
stderr: [ WARNING:root:Parse error: Ign
On 24/05/17 04:36 PM, Christopher Pax wrote:
> TO ADMIN: I am going to resubmit this question. please delete this thread.
>
> thanks
We don't delete messages (and couldn't really if we wanted to anyway,
given it is email based). I am sure responders will reply to the new thread.
cheers,
madi
>
TO ADMIN: I am going to resubmit this question. please delete this thread.
thanks
On Wed, May 24, 2017 at 4:10 PM, Christopher Pax wrote:
> In reference to previous email (which I accidentally sent without details)
>
> I am running postgresql as a resource in corosync. and there is a monitor
>
In reference to previous email (which I accidentally sent without details)
I am running postgresql as a resource in corosync. and there is a monitor
process that kicks off every few seconds to see if postgresql is alive (it
runs a select now). My immediate conserning is that it is generating alot
##
## /var/log/auth.log
##
May 24 15:23:19 ssinode02-g2 runuser: pam_unix(runuser:session): session
opened for user postgres by (uid=0)
May 24 15:23:19 ssinode02-g2 runuser: pam_unix(runuser:session): session
closed for user postgres
May 24 15:23:19 ssinode02-g2 runuser: pam_unix(runuser:session):
e to anyone else. In such case, you should destroy this message and
are asked to notify the sender by reply e-mail.
Von: Auer, Jens [jens.a...@cgi.com]
Gesendet: Freitag, 16. September 2016 16:51
An: users@clusterlabs.org
Betreff: [ClusterLabs] (no subject)
Hi,
Hi,
I have an Active/Passive configuration with a drbd mast/slave resource:
MDA1PFP-S01 14:40:27 1803 0 ~ # pcs status
Cluster name: MDA1PFP
Last updated: Fri Sep 16 14:41:18 2016Last change: Fri Sep 16 14:39:49
2016 by root via cibadmin on MDA1PFP-PCS01
Stack: corosync
Current DC: MDA1P
On 08/29/2016 05:34 PM, Scott Greenlese wrote:
> Hi folks,
>
> I'm assigned to system test Pacemaker/Corosync on the KVM on System Z
> platform
> with pacemaker-1.1.13-10 and corosync-2.3.4-7 .
>
> I have a cluster with 5 KVM hosts, and a total of 200
> ocf:pacemakerVirtualDomain resources define
Hi folks,
I'm assigned to system test Pacemaker/Corosync on the KVM on System Z
platform
with pacemaker-1.1.13-10 and corosync-2.3.4-7 .
I have a cluster with 5 KVM hosts, and a total of 200
ocf:pacemakerVirtualDomain resources defined to run
across the 5 cluster nodes (symmertical is true for
Hello Community,
I have an resource group (ctm_service) comprise of various resources. Now
the requirement is when one of its resource stops for soem time (10-20)
seconds, I want entire group will be stopped.
Is it possible to achieve this in pacemaker. Please help!
_
Hi,
I had 4 nodes with Ubuntu 14.04LTS in my cluster and all of then worked well. I
need upgrade all my cluster nodes to Ubuntu 16.04LTS without stop my resources.
Two nodes have been updated to 16.04 and the two others remains with 14.04. The
problem is that my cluster was splited and the node
TaMen说我挑食 <974120...@qq.com>,
You'd better compose your email title with a word like, JUNK or TEST, to
avoid misleading people here.
Digimer,
You are really nice! It is suspicious to me this user just to send a
junk email to confirm the subscription not in digest format ;)
Regards,
Roger
On 08/10/15 09:03 PM, TaMen说我挑食 wrote:
> Corosync+Pacemaker error during failover
You need to ask a question if you want us to be able to help you.
--
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without
access to education?
_
Corosync+Pacemaker error during failover___
Users mailing list: Users@clusterlabs.org
http://clusterlabs.org/mailman/listinfo/users
Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: ht
subscribe___
Users mailing list: Users@clusterlabs.org
http://clusterlabs.org/mailman/listinfo/users
Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org
27 matches
Mail list logo