Re: Unable to lower cpu frequency
On Thu, 17 May 2018 13:13:34 -0600 JD wrote: > You hit the nail on the head. > I found that the command line I was using contained the word > performance. Now, I am doing: > /bin/cpupower --cpu all frequency-set -u 2.00G > > and cpu-info is showing: > current CPU frequency is 1.60 GHz (asserted by call to hardware). > for both cpus. > > This was necessary because of running ffmpeg alongside with > playing videos cause HW errors. > Even thought the kernel throttled the cpu, it did not help much. > > Now, I do not get the HW errors and kernel ooops messages. Glad to hear it worked out for you. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/4C37UFL72OQWBDDBADH2OEWWG5RQOX7C/
Re: Unable to lower cpu frequency
You hit the nail on the head. I found that the command line I was using contained the word performance. Now, I am doing: /bin/cpupower --cpu all frequency-set -u 2.00G and cpu-info is showing: current CPU frequency is 1.60 GHz (asserted by call to hardware). for both cpus. This was necessary because of running ffmpeg alongside with playing videos cause HW errors. Even thought the kernel throttled the cpu, it did not help much. Now, I do not get the HW errors and kernel ooops messages. On Wed, May 16, 2018 at 10:00 AM, stan wrote: > On Tue, 15 May 2018 19:59:53 -0600 > JD wrote: > > > # /bin/cpupower --cpu all frequency-set -g performance 2G > > # /bin/cpupower --cpu all frequency-info | grep "current CPU > > frequency is" current CPU frequency is 2.80 GHz (asserted by call to > > hardware). current CPU frequency is 2.80 GHz (asserted by call to > > hardware). > > > > Cpu can accept frquencies as low as 800MHz. > > > > So, does anyone have a more magical incantation to force the 2 cores > > to run at 2.0 GHz? > > You could try adding --max? I'm not sure what the default is, might be > --min. > > When governor is set to performance, the CPU runs full out all the time. > It is possible to change the governor on a running system, but I'm not > sure how. You could change it to one of the below other than > performance, if it has been compiled into the kernel. As you can see, > I have only the ondemand governor in my kernel. > > These are the settings for my CPU, from boot/config-[] > # DEVFREQ Governors > CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y > # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set > # CONFIG_DEVFREQ_GOV_POWERSAVE is not set > # CONFIG_DEVFREQ_GOV_USERSPACE is not set > # CONFIG_DEVFREQ_GOV_PASSIVE is not set > > > Also, IIRC, the setting of CPU frequency is usually done directly in the > BIOS / firmware. In the kernel docs they say that some CPUs can't be > set from the kernel (but don't give a list). i.e. the BIOS would be > your only option if you have one of those, and it sounds like you > might. > ___ > users mailing list -- users@lists.fedoraproject.org > To unsubscribe send an email to users-le...@lists.fedoraproject.org > ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/KL7W3GGAKH77KGRBYTXZO3KYBMMO6APU/
Re: Unable to lower cpu frequency
On Tue, 15 May 2018 19:59:53 -0600 JD wrote: > # /bin/cpupower --cpu all frequency-set -g performance 2G > # /bin/cpupower --cpu all frequency-info | grep "current CPU > frequency is" current CPU frequency is 2.80 GHz (asserted by call to > hardware). current CPU frequency is 2.80 GHz (asserted by call to > hardware). > > Cpu can accept frquencies as low as 800MHz. > > So, does anyone have a more magical incantation to force the 2 cores > to run at 2.0 GHz? You could try adding --max? I'm not sure what the default is, might be --min. When governor is set to performance, the CPU runs full out all the time. It is possible to change the governor on a running system, but I'm not sure how. You could change it to one of the below other than performance, if it has been compiled into the kernel. As you can see, I have only the ondemand governor in my kernel. These are the settings for my CPU, from boot/config-[] # DEVFREQ Governors CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set Also, IIRC, the setting of CPU frequency is usually done directly in the BIOS / firmware. In the kernel docs they say that some CPUs can't be set from the kernel (but don't give a list). i.e. the BIOS would be your only option if you have one of those, and it sounds like you might. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org