Hello Ralph,
Is there any update on this?
Thanks,
Adam LeBlanc
On Fri, Nov 2, 2018 at 11:06 AM Adam LeBlanc wrote:
> Hello Ralph,
>
> When I do the -np 7 it still fails with "There are not enough slots
> available in the system to satisfy the 7 slots that were requested by the
> application",
While using the mca parameter in a real application I noticed a strange
effect, which took me a while to figure out: It appears that on the
Aries network the accumulate operations are not atomic anymore. I am
attaching a test program that shows the problem: all but one processes
continuously in
Quick scan of the program and it looks ok to me. I will dig deeper and see if I can determine the underlying cause.What Open MPI version are you using?-NathanOn Nov 08, 2018, at 11:10 AM, Joseph Schuchart wrote:While using the mca parameter in a real application I noticed a strange effect, which t
Sorry for the delay, I wanted to make sure that I test the same version
on both Aries and IB: git master bbe5da4. I realized that I had
previously tested with 3.1.3 on the IB cluster, which ran fine. If I use
the same version I run into the same problem on both systems (with --mca
btl_openib_al
Ok, then it sounds like a regression. I will try to track it down today or
tomorrow.
-Nathan
On Nov 08, 2018, at 01:41 PM, Joseph Schuchart wrote:
Sorry for the delay, I wanted to make sure that I test the same version
on both Aries and IB: git master bbe5da4. I realized that I had
previous
