HI Folks,
For the Open MPI 2.1.1 release, the only OSHMEM SPML's that work are the
ikrit and ucx.
yoda doesn't work.
Ikrit only works on systems with Mellanox iinterconnects and requires MXM
to be installed.
This is recommended for systems with connectx3 or older HCAs. For systems
with
connectx4 or connectx5 you should be using UCX.
You'll need to add --with-ucx + arguments as required to the configure
command line when
you build Open MPI/OSHMEM to pick up the ucx stuff.
A gotcha is that by default, the ucx spml is not selected, so either on the
oshrun
command line add
--mca spml ucx
or via env. variable
export OMPI_MCA_spml=ucx
I verified that a 2.1.1 release + UCX 1.2.0 builds your test (after fixing
the unusual
include files) and passes on my mellanox connectx5 cluster.
Howard
2017-11-21 8:24 GMT-07:00 Hammond, Simon David <sdha...@sandia.gov>:
> Hi Howard/OpenMPI Users,
>
>
>
> I have had a similar seg-fault this week using OpenMPI 2.1.1 with GCC
> 4.9.3 so I tried to compile the example code in the email below. I see
> similar behavior to a small benchmark we have in house (but using inc not
> finc).
>
>
>
> When I run on a single node (both PE’s on the same node) I get the error
> below. But, if I run on multiple nodes (say 2 nodes with one PE per node)
> then the code runs fine. Same thing for my benchmark which uses
> shmem_longlong_inc. For reference, we are using InfiniBand on our cluster
> and dual-socket Haswell processors.
>
>
>
> Hope that helps,
>
>
>
> S.
>
>
>
> $ shmemrun -n 2 ./testfinc
>
> --
>
> WARNING: There is at least non-excluded one OpenFabrics device found,
>
> but there are no active ports detected (or Open MPI was unable to use
>
> them). This is most certainly not what you wanted. Check your
>
> cables, subnet manager configuration, etc. The openib BTL will be
>
> ignored for this job.
>
>
>
> Local host: shepard-lsm1
>
> --
>
> [shepard-lsm1:49505] *** Process received signal ***
>
> [shepard-lsm1:49505] Signal: Segmentation fault (11)
>
> [shepard-lsm1:49505] Signal code: Address not mapped (1)
>
> [shepard-lsm1:49505] Failing at address: 0x18
>
> [shepard-lsm1:49505] [ 0] /lib64/libpthread.so.0(+0xf710)[0x7ffc4cd9e710]
>
> [shepard-lsm1:49505] [ 1] /home/projects/x86-64-haswell/
> openmpi/2.1.1/gcc/4.9.3/lib/openmpi/mca_spml_yoda.so(mca_
> spml_yoda_get+0x86d)[0x7ffc337cf37d]
>
> [shepard-lsm1:49505] [ 2] /home/projects/x86-64-haswell/
> openmpi/2.1.1/gcc/4.9.3/lib/openmpi/mca_atomic_basic.so(
> atomic_basic_lock+0x9a)[0x7ffc32f190aa]
>
> [shepard-lsm1:49505] [ 3] /home/projects/x86-64-haswell/
> openmpi/2.1.1/gcc/4.9.3/lib/openmpi/mca_atomic_basic.so(
> mca_atomic_basic_fadd+0x39)[0x7ffc32f19409]
>
> [shepard-lsm1:49505] [ 4] /home/projects/x86-64-haswell/
> openmpi/2.1.1/gcc/4.9.3/lib/liboshmem.so.20(shmem_int_
> fadd+0x80)[0x7ffc4d2fc110]
>
> [shepard-lsm1:49505] [ 5] ./testfinc[0x400888]
>
> [shepard-lsm1:49505] [ 6] /lib64/libc.so.6(__libc_start_
> main+0xfd)[0x7ffc4ca19d5d]
>
> [shepard-lsm1:49505] [ 7] ./testfinc[0x400739]
>
> [shepard-lsm1:49505] *** End of error message ***
>
> --
>
> shmemrun noticed that process rank 1 with PID 0 on node shepard-lsm1
> exited on signal 11 (Segmentation fault).
>
> --
>
> [shepard-lsm1:49499] 1 more process has sent help message
> help-mpi-btl-openib.txt / no active ports found
>
> [shepard-lsm1:49499] Set MCA parameter "orte_base_help_aggregate" to 0 to
> see all help / error messages
>
>
>
> --
>
> Si Hammond
>
> Scalable Computer Architectures
>
> Sandia National Laboratories, NM, USA
>
>
>
>
>
> *From: *users <users-boun...@lists.open-mpi.org> on behalf of Howard
> Pritchard <hpprit...@gmail.com>
> *Reply-To: *Open MPI Users <users@lists.open-mpi.org>
> *Date: *Monday, November 20, 2017 at 4:11 PM
> *To: *Open MPI Users <users@lists.open-mpi.org>
> *Subject: *[EXTERNAL] Re: [OMPI users] Using shmem_int_fadd() in
> OpenMPI's SHMEM
>
>
>
> HI Ben,
>
>
>
> What version of Open MPI are you trying to use?
>
>
>
> Also, could you describe something about your system. If its a cluster
>
> what sort of interconnect is being used.
>
>
>
> Howard
>
>
>
>
>
> 2017-11-20 14:13 GMT-07:00 Benjamin Brock <br...@cs.berkeley.edu>:
>
> What's the proper way to use
