Hello to everybody,
I am testing mbuni and I would like to use a HTTP mobile phone (not WAP).
So I am confused with the use of squid and its role in the system.
Can someone explain why and how to use squid in the system? Do I have to use
it to reach mms-port 8191?
I try also to find which port
I succeed to send MMS from mmssend to a mobile that retrieve it so my
previous issue is an Openwave issue..
I will try to find another MMS simulator
Emmanuel
2009/10/28 Emmanuel CHANSON emmanuelchan...@gmail.com
Still trying to send an retrieve mms using mmssend:
# mmssend -f +687xx -t
the phone (say http://mmsc) to the real
mbuni URL (say http://localhost:8191/ )
In terms of configuring the phone, you should put in a URL that can (one
way or the other) be translated into the Mbuni host and port.
On Oct 25, 2009, at 23:35, Emmanuel CHANSON wrote:
Hello to everybody,
I am
to do this. Much easier, if a little less wide-spread.
On Oct 28, 2009, at 23:04, Emmanuel CHANSON wrote:
Thnaks Paul for this answer,
So I should be able to 'NAT' using squid any port configured in input port
(let's say 3130) to the output port 8191 used by mbuni ?
I don't find any
160,
then it should split.
As far as notification goes, I imagine that in the first case, that you
have a picture, you get a notification to get it. In the second case that
you don't have anything, what to be notified for?
BR,
Nikos
- Original Message -
*From:* Emmanuel CHANSON
, at 00:24, Emmanuel CHANSON wrote:
Dears,
I am testing MMSBox and MMSC (both Mbuni gateway) but I am faced to an
issue regarding the use of the sendmms CGI script.
The issue for me is located on Kannel side but I would like your
confirmation first before asking Kannel users.
I have send a MMS
run Mbuni
MMSBox if you are a VASP, connecting to an operator to send/receive messages
through them. That's the key difference between the two modes and is
important to understanding how to use the two together.
On Nov 13, 2009, at 13:27, Emmanuel CHANSON wrote:
Hello Paul,
I am trying
the
MMS it fails...
For this sort of setup to work do I need to install and configure
'squid'?
regards,
Insim
___
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
--
Emmanuel
CHANSON Emmanuel
Mobile
Hello,
My goal is to retrieve a MMS from Mbuni VASP through a sms-service defined
in Kannel.
Has anyone already implement this config? (or know how to do this?)
What sms-service config should I use in Kannel in order to trigg mbuni
configured as VASP ?
And on mbuni side, what step do I have to
Emmanuel CHANSON emmanuelchan...@gmail.com
Hello,
My goal is to retrieve a MMS from Mbuni VASP through a sms-service defined
in Kannel.
Has anyone already implement this config? (or know how to do this?)
What sms-service config should I use in Kannel in order to trigg mbuni
configured as VASP
Any idea?
Regards,
Emmanuel
2009/11/25 Emmanuel CHANSON emmanuelchan...@gmail.com
Maybe I juste have to setup a sms-service on Kannel with a get-url
parameter triggering a PHP script that use the sendmms CGI script?
I am looking for something dedicated to Mbuni but maybe this is the answer
configuration.
BR,
Nikos
- Original Message -
*From:* Emmanuel CHANSON emmanuelchan...@gmail.com
*To:* users@mbuni.org
*Sent:* Tuesday, December 01, 2009 9:15 AM
*Subject:* [Users] Re: Kannel sms-service configuration in order to
triggMbuni VASP and retrieve a MMS
Any idea?
Regards
] ERROR: MMSBox: Error parsing SMIL response
from service[sendmms-user], msgid (none)!
What is wrong in my request?
Regards,
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-Calédonie: +687.77.35.02
Mobile France: +33 (0) 6.68.03.89.56
@email : emmanuelchan...@gmail.com
Any help?
Regards,
Emmanuel
2009/12/3 Emmanuel CHANSON emmanuelchan...@gmail.com
Hello everyone,
Have you ever seen this kind of error when trying to use the sendmms
interface of MBuni ?
*# lynx -dump
http://localhost:10001/?username=altmmspassword=altmmsfrom=%2B687971204to
as a full URL so Mbuni can
find it.
On Dec 09, 2009, at 05:39, Emmanuel CHANSON wrote:
Any help?
Regards,
Emmanuel
2009/12/3 Emmanuel CHANSON emmanuelchan...@gmail.com
Hello everyone,
Have you ever seen this kind of error when trying to use the sendmms
interface of MBuni ?
*# lynx
Hello,
Trying to send a MMS through GPRS modem, I am faced to an issue:
Mbuni CVS-20100125 with extras/mmbox-mm1 library compiled
Kannel CVS working and handling SMS
I am not sure about the custom config in mmsbox.conf, expecially how to
configure wvdial...
If I stop my smsc through Kannel then
-archive.com/users@mbuni.org/msg01844.html
On Mar 15, 2010, at 03:50, Emmanuel CHANSON wrote:
Hello,
Trying to send a MMS through GPRS modem, I am faced to an issue:
Mbuni CVS-20100125 with extras/mmbox-mm1 library compiled
Kannel CVS working and handling SMS
I am not sure about the custom
One thing, I don't have the same version of libcurl:
curl-7.19.7-7.fc12.i686
libcurl-7.19.7-7.fc12.i686
libcurl-devel-7.19.7-7.fc12.i686
I have a newer version, is it a problem?
BR
Emmanuel
2010/3/15 Emmanuel CHANSON emmanuelchan...@gmail.com
Thanks for the mail-archive ¨Paul,
I tried
:
group = core
admin-port = 13001
Hope to be of any help.
Best regards
Nuno Freitas
___
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-Calédonie: +687.77.35.02
-mms-user
username = altmms
password = altmms
faked-sender = 100
Regards,
Emmanuel
2010/3/16 Paul Bagyenda bagye...@dsmagic.com
Answers inline.
On Mar 16, 2010, at 00:08, Emmanuel CHANSON wrote:
*Thanks Nuno for your help,
*
*First thing is that the text I sent before is for receiving a mms
...@mbuni.org] *En nombre
de *Emmanuel CHANSON
*Enviado el:* miércoles, 17 de marzo de 2010 15:36
*Para:* users@mbuni.org
*Asunto:* Re: [Users] MMSBox and MM1 GPRS modem
I tried many things (even Mbuni CVS + Kannel recommended release) but I got
always the same behavior, I am blocked since 3 days
Any chance to get a lead ?
Emmanuel
2010/3/18 Emmanuel CHANSON emmanuelchan...@gmail.com
Thanks Cristian to help me.
I did not modify this part of mmsbox.conf because I did not setup for the
moment any mms service. So yes this directory does not exist but I don't
need it for the moment, my
.
or
*Mar 21 15:47:44 kannel pppd[18129]: PAP authentication succeeded
*Mar 21 15:47:46 kannel pppd[18129]: LCP terminated by peer
Thanks by advance,
Emmanuel
**
*
2010/3/21 Emmanuel CHANSON emmanuelchan...@gmail.com
I succeed to get something interresting :)
I set mbuni to use wvdial but I shutdown
Hello,
Does anyone know why the mbuni web site is down?
BR,
--
Emmanuel
CHANSON Emmanuel
@email : emmanuelchan...@gmail.com
___
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
Hello mbuni users and developers,
Mbuni CVS 20100702
Modem: Sagem My300x
Purpose: Try to send MMS through MM1 GPRS modem but failed.
I did not succeed to send a MMS through MM1 GPRS modem connection.
When sending a MMS through mmsbox interface I do see the pppd process
starting to connect to
pid
file is created _before_ interface IP and routing is set up. I solved
this by symlinking ppp pid to some path in if-up after everything is
set-up and making mbuni to look for a file on that path.
On Tue, Aug 03, 2010 at 03:13:09PM +1100, Emmanuel CHANSON wrote:
Hello mbuni users
for your help
Emmanuel
2010/8/3 Piotr Isajew p...@ex.com.pl
On Tue, Aug 03, 2010 at 05:44:30PM +1100, Emmanuel CHANSON wrote:
One question:
Does Mbuni will open and close GPRS connection each time it will have to
send a MMS ? or does it keep the connection always open ?
It opens
*Hello Piotr,
Still Mbuni does not want to wait after GPRS connection even with ip-up
script, do I miss something?
Following your advises I have configured:
in /etc/ppp/ip-up symlink to ip-up.sh:*
*#!/bin/sh
IFNAME=$1
LOCAL_IP=$4
REMOTE_IP=$5
IPPARAM=$6
MMS_PROXY=192.168.39.201
ip route add
Yeah, thanks Piotr,
It seems better using 'nodetach', mbuni does not block anymore but retry to
send MMS
but I have an issue with routing to reach MMS-C, when pppd is established it
should set the route in ip-up script: ip route to 192.168.39.201 dev ppp0 I
guess?
Can I use route add -host
MMS stored in spool before closing it ?
Many thanks Piotr for your support, you helped me to solve this :)
I plan to developp a web interface that can use mbuni to send MMS.
BR,
Emmanuel
2010/8/5 Piotr Isajew p...@ex.com.pl
On Thu, Aug 05, 2010 at 01:29:24PM +1100, Emmanuel CHANSON wrote
connect and disconnect for each MMS
If this is normal behavior of Mbuni, need to check for a patch or a script
that handle pppd
Emmanuel
2010/8/5 Piotr Isajew p...@ex.com.pl
On Thu, Aug 05, 2010 at 04:59:59AM +0200, Emmanuel CHANSON wrote:
I forgot to add
/sbin before 'ip route' in ip-up
to add a 2 second sleep at end of inner loop in
handle_mm1 function that will solve your problem.
On Thu, Aug 05, 2010 at 02:55:16PM +1100, Emmanuel CHANSON wrote:
Yes, by default mmsbox.conf has the following config:
group = mbuni
storage-directory = /var/spool/mbuni
max-send-threads
Hello,
This time I am installing Mbuni on a x86_64 plateform.
I got this error trying to compile Mbuni on Fedora 13 x86_64:
./bootstrap
./configure
make install
...
make[2]: entrant dans le répertoire «
/opt/mediaserver/softs/mbuni/mbuni/extras/mmsbox-mm1 »
/bin/sh ../../libtool --tag=CC
« /opt/mediaserver/softs/mbuni/mbuni/extras
»
make: *** [install-recursive] Erreur 1
#
Emmanuel
2010/8/5 Vincent CHAVANIS v.chava...@telemaque.fr
just read the warnings ;-)
recompile the kannel libs with -fPIC
regards
Vincent.
Le 05/08/2010 13:26, Emmanuel CHANSON a écrit :
Hello
with '-fPIC' too?
On Fri, Aug 06, 2010 at 07:24:56AM +0200, Emmanuel CHANSON wrote:
When compiling kannel using :
./configure --with-mysql --with-cflags=-fPIC
And then mbuni I got the same errors:
*/usr/bin/ld: /usr/lib64/kannel/libgwlib.a(gwmem-native.o): relocation
R_X86_64_32 against
solution). Maybe
try:
CFLAGS=-fPIC ./configure
for both projects instead of --with-cflags option.
On Fri, Aug 06, 2010 at 06:34:20PM +1100, Emmanuel CHANSON wrote:
Yes I tried using:
For Kannel:
# ./configure --with-mysql --with-cflags=-fPIC
...
# make rpm
For Mbuni
make install
# echo /usr/local/mbuni/lib /etc/ld.so.conf
# ldconfig
For mbuni:
# CFLAGS=-fPIC ./configure --prefix=/usr/local/mbuni
--with-kannel-dir=/usr/local/mbuni
# make
On Fri, Aug 06, 2010 at 09:35:39PM +1100, Emmanuel CHANSON wrote:
Same errors :(
2010/8/6 Vincent CHAVANIS
I already reported this behavior but I think it is better to open a new
thread for this.
I notice that in my config, Mbuni connect and disconnect from ppp GPRS
connection for each MMS stored in queue.
Is it a normal behavior ?
Piotr told me that in its config:
*With settings similar to yours I
Any advises ? :(
Emmanuel
2010/8/10 Emmanuel CHANSON emmanuelchan...@gmail.com
Hello,
I am using Mbuni CVS
I have configured Mbuni in order to access its admin interface:
...
*group = mbuni
storage-directory = /var/spool/mbuni
max-send-threads = 5
maximum-send-attempts = 50
default
Any help from some experts?
Best regards,
Emmanuel
2010/8/20 Emmanuel CHANSON emmanuelchan...@gmail.com
I tested with 1010 as sender in the URL and 1010 also configured in
fake-sender that overide the from url value:
In mbuni log I see:
bearerbox.c:1519 sendMsg [MM7] [n/a] Sent MMSBox
. The MMSC pretty much always inserts a sender address for
you, hence Mbuni removes the sender address and tells the MMSC to insert
one.
On Aug 19, 2010, at 23:53, Emmanuel CHANSON wrote:
Yes, I know that in SMS messaging it is restricted,
but in MMS I am quite sure it is possible by setting
Does anyone has already configured a Huawei E220 with Mbuni and pppd ?
I am looking for any config with E220.
Note: I use actually a Nokia 6230 that work well if anybody needs config
files.
Regards,
--
Emmanuel
___
Users mailing list
Users@mbuni.org
database accordingly.
Regards,
Emmanuel
2010/8/19 Emmanuel CHANSON emmanuelchan...@gmail.com
Hello,
After successfully having configured mmsbox to handle MM1 through GPRS
modem (mm1-send-req), I try to configure DLR-URL:
*How to handle DLR correctly ? I have some missundertanding.
- What
Hi Emmanuel,
I need config files using Nokia 6230,can you send it to me please??
Regards.
Patrick
--
*De :* Emmanuel CHANSON emmanuelchan...@gmail.com
*À :* users@mbuni.org
*Envoyé le :* Mar 24 août 2010, 0h 59min 12s
*Objet :* [Users] Mbuni Huawei E220
Jr.
Skycore LLC
Skycore.com / Cellyspace.com
reic...@skycore.com
O: 617 314 7688 x706
M: 781 492 6436
Skype: riche127
[image: skycore_logoWebWhite_small]
*From:* users-boun...@mbuni.org [mailto:users-boun...@mbuni.org] *On
Behalf Of *Emmanuel CHANSON
*Sent:* Tuesday, August 24
0 0 0
eth0
un problème ici ?
On 24 August 2010 23:33, Michel TOKO tokomic...@gmail.com wrote:
Yes i did.
*port=8080;mmsc-url=
http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100*
On 24 August 2010 23:24, Emmanuel CHANSON emmanuelchan...@gmail.comwrote
[LCP TermReq id=0x3 User request]
Script /etc/ppp/ip-down finished (pid 7507), status = 0xff
rcvd [LCP TermAck id=0x3 User request]
Connection terminated.
On 25 August 2010 00:36, Emmanuel CHANSON emmanuelchan...@gmail.comwrote:
You can reach your MMS-C as you successfully open a telnet
Thanks it is correct now, I found this old URL in a thread.
BR,
Emmanuel
2010/8/30 Paul Bagyenda bagye...@dsmagic.com
The URL is wrong it should be
http://localhost:10005/status?password=xxxmmsc-id=modem
On Aug 30, 2010, at 07:08, Emmanuel CHANSON wrote:
One more try if someone has
Sagem My300x also
Emmanuel
2010/9/1 Emmanuel CHANSON emmanuelchan...@gmail.com
I am using Nokia 6230
Only tested with MM1 send to MMS-C, but I receive also ACK as incoming MMS
so it should works in both sending and receivingencore demain et
BR,
Emmanuel
2010/9/1 Paul Bagyenda bagye
Hello Ben,
I have post a question about Huawei E220 and its config using Mbuni, is it
possible to get information about it? (ppp config or wvdial, mmsbox.conf and
so one?
I did not succeed to make it work using Mbuni.
Regards,
Emmanuel
2010/9/21 Ben Hardill b.hard...@gmail.com
Hi,
I have
Hello Ben,
Can you post your huawei config used with Mbuni?
Regards,
Emmanuel
2010/9/21 Emmanuel CHANSON emmanuelchan...@gmail.com
Hello Ben,
I have post a question about Huawei E220 and its config using Mbuni, is it
possible to get information about it? (ppp config or wvdial, mmsbox.conf
Hello,
2011-03-28 15:29:11 [5042] [0] PANIC: No Message supplied, or failed to
decode binary data!
It seems your mms is not in mms format.
try to use the one attached.
BR
Emmanuel
2011/3/29 ranjani kr ranjani14...@gmail.com
Hi All,
I'm trying to set up MMS gateway.
With the help of some
Hello Jamo,
To compose MMS check on Nokia MMS forum.
You can also use the HTTP API from Mbuni to send MMS:
# lynx -dump
http://localhost:10001/?username=altmmspassword=altmmsto=+687783548/TYPE=PLMNsubject=Test-MMStext=MMSTexte;
With a SMIL file:
# lynx -dump '
Thanks Paul !
Emmanuel
2011/3/31 Paul Bagyenda bagye...@dsmagic.com
Hi All,
It's been a couple of years since we had a new release out. This does not
mean that nothing much has been happening with Mbuni (ChangeLog is out
witness). We thought the time was right for another release, so here
Would be helpful yes.
I still did not get this config too.
BR
Emmanuel
2011/4/14 Stanisław Czech s.cz...@nowatel.com
Hi,
After browsing few hours through various posts and sites I didn't find
complete setup for Huawei modems (E220 or other). Does anyone have such
working
configuration
Thanks !
2011/4/17 Stanisław Czech s.cz...@nowatel.com
In 1.5.0 this is no longer (necessarily) a custom MMSC. So you could add
something like this:
group = mmsc
id=modem
type = mm1
mm1-sms-on-command = lynx -dump
'http://localhost:13000/start-smsc?password=barsmsc=modemsmsc'
Is Mbuni able to detect a a mobile that does not support MMS ?
Emmanuel
2012/3/7 Oltion Kola oltion.k...@myself.com
Hi,
Any idea anyone?
Thank you,
Olti
On Mon, 05 Mar 2012 14:43:09 +0100, Oltion Kola oltion.k...@myself.com
wrote:
Hi,
Thank you for the fast reply. Could you
57 matches
Mail list logo