Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Hi all, Am trying to send MMS through MM1 using GPRS modem. Everything seems Ok but still getting an error when sending the MMS. Below is the MMSBOX log: 2010-09-07 19:12:50 [11712] [3] DEBUG: HTTP: Creating HTTPClient for `xxx.xxx.xxx.xxx'. 2010-09-07 19:12:50 [11712] [3] DEBUG: HTTP: Created HTTPClient area 0x8c58820. 2010-09-07 19:12:50 [11712] [6] DEBUG: HTTP: Resetting HTTPClient for `xxx.xxx.xxx.xxx'. 2010-09-07 19:13:50 [11712] [2] DEBUG: Timeout for fd:56 appeares. 2010-09-07 19:13:50 [11712] [2] DEBUG: HTTP: Destroying HTTPClient area 0x8c58820. 2010-09-07 19:13:50 [11712] [2] DEBUG: HTTP: Destroying HTTPClient for `xxx.xxx.xxx.xxx'. 2010-09-07 19:15:49 [11712] [3] DEBUG: HTTP: Creating HTTPClient for `xxx.xxx.xxx.xxx'. 2010-09-07 19:15:49 [11712] [3] DEBUG: HTTP: Created HTTPClient area 0x8c58788. 2010-09-07 19:15:49 [11712] [14] DEBUG: WSP: Mapping `text/plain', WSP 1.2 to 0x0003. 2010-09-07 19:15:49 [11712] [14] INFO: mmsbox.c:1366 [mmsbox] [n/a] MMSBox: Queued message from service [sendmms-user], [transid [Mbuni-msg.8149.x1.12.51]: qf8149.1.x712.50 2010-09-07 19:15:49 [11712] [14] DEBUG: HTTP: Destroying HTTPClient area 0x8c58788. 2010-09-07 19:15:49 [11712] [14] DEBUG: HTTP: Destroying HTTPClient for `xxx.xxx.xxx.xxx'. 2010-09-07 19:15:49 [11712] [14] INFO: mmsbox.c:1613 [mmsbox] [n/a] MMSBox.mmssend: u=know1221, Queued [Accepted: Mbuni-msg.8149.x1.12.51] 2010-09-07 19:15:50 [11712] [8] DEBUG: Queued to thread 0 for /var/www/html/mms/mmsbox_outgoing/qf8149.1.x712.50, sendt=1283858149, tnow=1283858150 SMSC `WAVECOM' shut down arg 0: pppd arg 1: call arg 2: wavecom-auth chat: Sep 07 19:15:57 CONNECT 115200 Serial connection established. using channel 20 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1] rcvd [LCP ConfRej id=0x1 ] sent [LCP ConfReq id=0x2 ] rcvd [LCP ConfAck id=0x2 ] rcvd [LCP ConfReq id=0x1 ] sent [LCP ConfAck id=0x1 ] sent [PAP AuthReq id=0x1 user="xx" password=] cat: /var/run/ppp0-mbuni.pid: No such file or directory 2010-09-07 19:16:00 [11712] [5] INFO: mmsbox_mm1.c:659 [mmsbox-mm1] [n/a] waiting for connection: 0, pid=11747 cpid=0, ifexited=1, exitstatus=0 rcvd [PAP AuthAck id=0x1 "Welcome!"] Remote message: Welcome! PAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [LCP ProtRej id=0x14 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [IPCP ConfAck id=0x2 ] local IP address 10.237.136.238 remote IP address 192.168.111.111 primary DNS address xxx.xxx.xxx.xxx secondary DNS address xxx.xxx.xxx.xxx Script /etc/ppp/ip-up started (pid 11765) Script /etc/ppp/ip-up finished (pid 11765), status = 0x0 2010-09-07 19:16:05 [11712] [5] INFO: mmsbox_mm1.c:379 [mmsbox-mm1] [n/a] start_gprs returned PID: 11747 2010-09-07 19:16:05 [11712] [5] DEBUG: WSP: Mapping `text/plain', WSP 1.2 to 0x0003. 2010-09-07 19:16:06 [11712] [5] INFO: mmsbox_mm1.c:589 [mmsbox-mm1] [n/a] write_data called with nmemn=401, size=1 2010-09-07 19:16:06 [11712] [5]* WARNING: Error parsing application-header.* 2010-09-07 19:16:06 [11712] [5] DEBUG: Octet string at 0x8c4a910: 2010-09-07 19:16:06 [11712] [5] DEBUG: len: 401 2010-09-07 19:16:06 [11712] [5] DEBUG: size: 1024 2010-09-07 19:16:06 [11712] [5] DEBUG: immutable: 0 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 .http://www. 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 77 61 70 66 6f 72 75 6d 2e 6f 72 67 2f 44 54 44 wapforum.org/DTD 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 2f 78 68 74 6d 6c 2d 6d 6f 62 69 6c 65 31 30 2e /xhtml-mobile10. 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 64 74 64 27 3e 0a 3c 68 74 6d 6c 20 78 6d 6c 6e dtd'>... 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 54 68 65 20 72 65 71 75 65 73 74 20 66 61 69 6c The request fail 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 65 64 3c 2f 74 69 74 6c 65 3e 0a 3c 2f 68 65 61 ed...*The request is* 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 20 6e 6f 74 20 75 6e 64 65 72 73 74 6f 6f 64 2e * not understood*. 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 3c 2f 62 69 67 3e 3c 2f 70 3e 0a 3c 70 3e 0a 3c ..< 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 69 3e 54 65 63 68 6e 69 63 61 6c 20 64 65 73 63 i>Technical desc 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 72 69 70 74 69 6f 6e 3a 3c 2f 69 3e 3c 62 72 2f ription:*400 Bad Request* 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 20 2d 20 43 68 65 63 6b 20 79 6f 75 72 20 73 70-* Check your sp* 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 65 6c 6c 69 6e 67 20 66 6f 72 20 74 68 65 20 72 *elling for the r* 2010-09-07 19:16:06 [11712] [5] DEBUG: data: 65 71 75 65 73 74 65 64 20 55 52 4c 2e 3c 2f 70 * equested URL*... 2010-09-07 19:16:06 [11712] [5] DEBUG: Octet string d
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
This is more link how the message is sent: I use: # lynx -dump " http://localhost:10001/?username=tester&password=foobar&mmsc=modem&from=%2BYY/TYPE=PLMN&to=%2BXX/TYPE=PLMN&subject=Test&text=test+mbuni " Did you url-encode your link? I don't have others ideas, maybe somes experts can help here :) Emmanuel 2010/8/25 Michel TOKO > Thanks you Emmanuel, > > Am no more getting this error but unfortunately no matter what i send, > either a simple text or a smil file, get > > *2010-08-25 09:57:32 [8318] [5] WARNING: Error parsing application-header* > . > > > 2010*-08-25 09:57:32 [8318] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* > 2010-08-25 09:57:32 [8318] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0 > Terminating on signal 15 > 2010-08-25 09:57:32 [8318] [18] INFO: mmsbox_mm1.c:345 > [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) > 2010-08-25 09:57:32 [8318] [18] INFO: bearerbox.c:1519 [MM7] > [n/a] Retry later MMSBox Outgoing Queue MMS Send: From x/TYPE=PLMN, > to xx/TYPE=PLMN, msgsize=116: msgid=[N/A] > Connect time 0.1 minutes. > Sent 553 bytes, received 700 bytes. > Script /etc/ppp/ip-down started (pid 8366) > > sent [LCP TermReq id=0x3 "User request"] > Script /etc/ppp/ip-down finished (pid 8366), status = 0x0 > > rcvd [LCP TermAck id=0x3 "User request"] > Connection terminated. > > > ___ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > > -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02 Mobile France: +33 (0) 6.68.03.89.56 @email : [email protected] ___ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Thanks you Emmanuel, Am no more getting this error but unfortunately no matter what i send, either a simple text or a smil file, get *2010-08-25 09:57:32 [8318] [5] WARNING: Error parsing application-header*. 2010*-08-25 09:57:32 [8318] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* 2010-08-25 09:57:32 [8318] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 Terminating on signal 15 2010-08-25 09:57:32 [8318] [18] INFO: mmsbox_mm1.c:345 [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) 2010-08-25 09:57:32 [8318] [18] INFO: bearerbox.c:1519 [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From x/TYPE=PLMN, to xx/TYPE=PLMN, msgsize=116: msgid=[N/A] Connect time 0.1 minutes. Sent 553 bytes, received 700 bytes. Script /etc/ppp/ip-down started (pid 8366) sent [LCP TermReq id=0x3 "User request"] Script /etc/ppp/ip-down finished (pid 8366), status = 0x0 rcvd [LCP TermAck id=0x3 "User request"] Connection terminated. ___ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
What is you custom setting in mmsbox.conf? It seems you keep ppp0.pid and didn't manage using ppp0-mbuni.pid. Mbuni wait until this ppp0.pid file is created before sending the MMS BUT Mbuni doesn't wait that the routing is done to reach MMSC so using ip-up script you should create a ppp0-mbuni.pid lynk (symlink to ppp0.pid) This symlink is created as soon as routing is done in ip-up script * mmsbox.conf in custom settings: gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1* ip-down should contain the command to remove this symlink when ppp0 connection is closed Emmanuel 2010/8/25 Michel TOKO > This is a part of the log. If you need more than this please let me know. > > 2010-08-25 08:17:34 [6800] [5] INFO: mmsbox_mm1.c:659 > [mmsbox-mm1] [n/a] waiting for connection: 0, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > cat: /var/run/ppp0.pid: No such file or directory > 2010-08-25 08:17:39 [6800] [5] INFO: mmsbox_mm1.c:659 > [mmsbox-mm1] [n/a] waiting for connection: 1, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > cat: /var/run/ppp0.pid: No such file or directory > 2010-08-25 08:17:44 [6800] [5] INFO: mmsbox_mm1.c:659 > [mmsbox-mm1] [n/a] waiting for connection: 2, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > chat: Aug 25 08:17:47 CONNECT 115200 > Serial connection established. > using channel 38 > Using interface ppp0 > Connect: ppp0 <--> /dev/ttyUSB0 > sent [LCP ConfReq id=0x1 > ] > rcvd [LCP ConfRej id=0x1 ] > sent [LCP ConfReq id=0x2 ] > rcvd [LCP ConfAck id=0x2 ] > 2010-08-25 08:17:49 [6800] [5] INFO: mmsbox_mm1.c:379 > [mmsbox-mm1] [n/a] start_gprs returned PID: 7470 > 2010-08-25 08:17:49 [6800] [5] DEBUG: WSP: Mapping `image/gif', WSP 1.2 to > 0x001d. > rcvd [LCP ConfReq id=0x1 pap>] > sent [LCP ConfAck id=0x1 pap>] > sent [PAP AuthReq id=0x1 user="65eideas" password=] > rcvd [PAP AuthAck id=0x1 "Welcome!"] > Remote message: Welcome! > PAP authentication succeeded > sent [CCP ConfReq id=0x1 ] > sent [IPCP ConfReq id=0x10.0.0.0>] > rcvd [IPCP ConfReq id=0x1 ] > sent [IPCP ConfAck id=0x1 ] > rcvd [LCP ProtRej id=0x26 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] > Protocol-Reject for 'Compression Control Protocol' (0x80fd) received > rcvd [IPCP ConfNak id=0x1 > ] > sent [IPCP ConfReq id=0x2 > ] > rcvd [IPCP ConfAck id=0x2 > ] > local IP address 10.237.205.147 > > remote IP address 192.168.111.111 > primary DNS address 165.21.83.88 > secondary DNS address 165.21.100.88 > *Script /etc/ppp/ip-up started (pid 7498)* > *Script /etc/ppp/ip-up finished (pid 7498), status = 0x1 > 2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:628 > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host* > 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string at 0xb4c0ba68: > 2010-08-25 08:20:58 [6800] [5] DEBUG: len: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: size: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: immutable: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string dump ends. > *2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* > 2010-08-25 08:20:58 [6800] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0 > 2010-08-25 08:20:58 [6800] [20] INFO: mmsbox_mm1.c:345 > [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) > 2010-08-25 08:20:58 [6800] [20] INFO: bearerbox.c:1519 [MM7] > [n/a] Retry later MMSBox Outgoing Queue MMS Send: From +x/TYPE=PLMN, > to xx/TYPE=PLMN, msgsize=5517: msgid=[N/A] > Terminating on signal 15 > > Connect time 3.2 minutes. > *Sent 300 bytes, received 676 bytes.* > Script /etc/ppp/ip-down started (pid 7507) > sent [LCP TermReq id=0x3 "User request"] > Script /etc/ppp/ip-down finished (pid 7507), status = 0xff > rcvd [LCP TermAck id=0x3 "User request"] > Connection terminated. > > > > > > On 25 August 2010 00:36, Emmanuel CHANSON wrote: > >> You can reach your MMS-C as you successfully open a telnet connection on >> port 8080 so this is something else. >> >> Try to remove the smil part and send just a text? >> >> >> $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&text=test"; >> >> Other thing >> Try to check your logs to see if the fetch error happens before ppp0 >> connection is up? >> Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing >> is done in order to reach MMS-C. >> >> Check also that /var/run/ppp0-mbuni.pid is correclty removed after each >> connection close. >> Try to delete it by hand before a test if it was present. >> >> Mbuni wait until the ppp0-mbuni.pid file is created (by ip-up script) and >> then will send MMS. >> >> Post your full logs in case of problem. >> >> >> Emmanuel >> >> 2010/8/25 Michel TOKO >> >>> telnet 165.21.42.84 8080 >>> Trying 165.21.42.84... >>> Connected to 165.21.42.84 (165.21.42.84). >>> Escape character is '^]'. >>> >>> >>> posting the mms, i run a php script : >>> >>> >>> $url=$pat
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
This is a part of the log. If you need more than this please let me know. 2010-08-25 08:17:34 [6800] [5] INFO: mmsbox_mm1.c:659 [mmsbox-mm1] [n/a] waiting for connection: 0, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:39 [6800] [5] INFO: mmsbox_mm1.c:659 [mmsbox-mm1] [n/a] waiting for connection: 1, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:44 [6800] [5] INFO: mmsbox_mm1.c:659 [mmsbox-mm1] [n/a] waiting for connection: 2, pid=7470 cpid=0, ifexited=1, exitstatus=5 chat: Aug 25 08:17:47 CONNECT 115200 Serial connection established. using channel 38 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1] rcvd [LCP ConfRej id=0x1 ] sent [LCP ConfReq id=0x2 ] rcvd [LCP ConfAck id=0x2 ] 2010-08-25 08:17:49 [6800] [5] INFO: mmsbox_mm1.c:379 [mmsbox-mm1] [n/a] start_gprs returned PID: 7470 2010-08-25 08:17:49 [6800] [5] DEBUG: WSP: Mapping `image/gif', WSP 1.2 to 0x001d. rcvd [LCP ConfReq id=0x1 ] sent [LCP ConfAck id=0x1 ] sent [PAP AuthReq id=0x1 user="65eideas" password=] rcvd [PAP AuthAck id=0x1 "Welcome!"] Remote message: Welcome! PAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [LCP ProtRej id=0x26 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [IPCP ConfAck id=0x2 ] local IP address 10.237.205.147 remote IP address 192.168.111.111 primary DNS address 165.21.83.88 secondary DNS address 165.21.100.88 *Script /etc/ppp/ip-up started (pid 7498)* *Script /etc/ppp/ip-up finished (pid 7498), status = 0x1 2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host* 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string at 0xb4c0ba68: 2010-08-25 08:20:58 [6800] [5] DEBUG: len: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: size: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: immutable: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string dump ends. *2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* 2010-08-25 08:20:58 [6800] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 2010-08-25 08:20:58 [6800] [20] INFO: mmsbox_mm1.c:345 [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) 2010-08-25 08:20:58 [6800] [20] INFO: bearerbox.c:1519 [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From +x/TYPE=PLMN, to xx/TYPE=PLMN, msgsize=5517: msgid=[N/A] Terminating on signal 15 Connect time 3.2 minutes. *Sent 300 bytes, received 676 bytes.* Script /etc/ppp/ip-down started (pid 7507) sent [LCP TermReq id=0x3 "User request"] Script /etc/ppp/ip-down finished (pid 7507), status = 0xff rcvd [LCP TermAck id=0x3 "User request"] Connection terminated. On 25 August 2010 00:36, Emmanuel CHANSON wrote: > You can reach your MMS-C as you successfully open a telnet connection on > port 8080 so this is something else. > > Try to remove the smil part and send just a text? > > > $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&text=test"; > > Other thing > Try to check your logs to see if the fetch error happens before ppp0 > connection is up? > Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing > is done in order to reach MMS-C. > > Check also that /var/run/ppp0-mbuni.pid is correclty removed after each > connection close. > Try to delete it by hand before a test if it was present. > > Mbuni wait until the ppp0-mbuni.pid file is created (by ip-up script) and > then will send MMS. > > Post your full logs in case of problem. > > > Emmanuel > > 2010/8/25 Michel TOKO > >> telnet 165.21.42.84 8080 >> Trying 165.21.42.84... >> Connected to 165.21.42.84 (165.21.42.84). >> Escape character is '^]'. >> >> >> posting the mms, i run a php script : >> >> >> $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&smil=$smil"; >> >> where $path= http://xxx.xxx.xxx.xxx:10001/cgi-bin/sendmms and $smil is a >> simple smil file contaning a gif image >> >> thanks >> >> >> On 24 August 2010 23:59, Emmanuel CHANSON wrote: >> >>> Yes it should be ok >>> >>> Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is >>> up and rounting is done. >>> Or do this test with mbuni stop and launch ppd by hand *'pppd call >>> mobile-auth'* >>> >>> If you succeed then maybe you post a bad MMS. What is the command you run >>> to post a MMS to Mbuni ? >>> >>> Emmanuel >>> >>> 2010/8/25 Michel TOKO >>> sorry, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.25
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
You can reach your MMS-C as you successfully open a telnet connection on port 8080 so this is something else. Try to remove the smil part and send just a text? $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&text=test"; Other thing Try to check your logs to see if the fetch error happens before ppp0 connection is up? Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing is done in order to reach MMS-C. Check also that /var/run/ppp0-mbuni.pid is correclty removed after each connection close. Try to delete it by hand before a test if it was present. Mbuni wait until the ppp0-mbuni.pid file is created (by ip-up script) and then will send MMS. Post your full logs in case of problem. Emmanuel 2010/8/25 Michel TOKO > telnet 165.21.42.84 8080 > Trying 165.21.42.84... > Connected to 165.21.42.84 (165.21.42.84). > Escape character is '^]'. > > > posting the mms, i run a php script : > > > $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&smil=$smil"; > > where $path= http://xxx.xxx.xxx.xxx:10001/cgi-bin/sendmms and $smil is a > simple smil file contaning a gif image > > thanks > > > On 24 August 2010 23:59, Emmanuel CHANSON wrote: > >> Yes it should be ok >> >> Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is >> up and rounting is done. >> Or do this test with mbuni stop and launch ppd by hand *'pppd call >> mobile-auth'* >> >> If you succeed then maybe you post a bad MMS. What is the command you run >> to post a MMS to Mbuni ? >> >> Emmanuel >> >> 2010/8/25 Michel TOKO >> >>> sorry, >>> >>> >>> netstat -rn >>> Kernel IP routing table >>> Destination Gateway Genmask Flags MSS Window irtt >>> Iface >>> 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 >>> ppp0 >>> 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 >>> ppp0 >>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 >>> eth0 >>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >>> eth0 >>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 >>> eth0 >>> >>> is it normal ? >>> >>> >>> On 24 August 2010 23:38, Michel TOKO wrote: >>> Emmanuel, resultat du netstat, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 un problème ici ? On 24 August 2010 23:33, Michel TOKO wrote: > Yes i did. > > *port=8080;mmsc-url= > http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* > > > On 24 August 2010 23:24, Emmanuel CHANSON > wrote: > >> Michel, >> >> >> *in my config file the mmsc proxy is set as suggested. >> ** >> mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> * >> Did you replace these values by your config used in your provider >> network ? >> ie: your mmsc ip address & your mmsc port ? and mms url ? >> >> You have to. >> >> Otherwise second solution below with routing. >> >> Emmanuel >> >> 2010/8/25 Michel TOKO >> >> Thanks Emmanuel, >>> >>> in my config file the mmsc proxy is set as suggested. >>> * >>> mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>> >>> May be i've to check your second advice >>> >>> * >>> maybe you can not reach your mms-c cause of some routing not >>> configured, check your routing table after ppp0 is up and you can try to >>> "telnet mms-c_ip mmsc_port" to see if you reach it. >>> >>> If not then you have to add a route to reach it, by hand first to >>> test, then inside /etc/ppp/ip-up. >>> >>> Will get back to you very soon. >>> >>> Thanks >>> >>> >>> On 24 August 2010 22:27, Emmanuel CHANSON >> > wrote: >>> Hello Michel, *.. **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>>
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
telnet 165.21.42.84 8080 Trying 165.21.42.84... Connected to 165.21.42.84 (165.21.42.84). Escape character is '^]'. posting the mms, i run a php script : $url=$path."?username=$username&password=$password&to=xx&subject=MBUNI&smil=$smil"; where $path= http://xxx.xxx.xxx.xxx:10001/cgi-bin/sendmms and $smil is a simple smil file contaning a gif image thanks On 24 August 2010 23:59, Emmanuel CHANSON wrote: > Yes it should be ok > > Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is up > and rounting is done. > Or do this test with mbuni stop and launch ppd by hand *'pppd call > mobile-auth'* > > If you succeed then maybe you post a bad MMS. What is the command you run > to post a MMS to Mbuni ? > > Emmanuel > > 2010/8/25 Michel TOKO > >> sorry, >> >> >> netstat -rn >> Kernel IP routing table >> Destination Gateway Genmask Flags MSS Window irtt >> Iface >> 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 >> ppp0 >> 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 >> ppp0 >> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 >> eth0 >> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >> eth0 >> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 >> eth0 >> >> is it normal ? >> >> >> On 24 August 2010 23:38, Michel TOKO wrote: >> >>> Emmanuel, resultat du netstat, >>> netstat -rn >>> Kernel IP routing table >>> Destination Gateway Genmask Flags MSS Window irtt >>> Iface >>> 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 >>> ppp0 >>> 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 >>> ppp0 >>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 >>> eth0 >>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >>> eth0 >>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 >>> eth0 >>> >>> un problème ici ? >>> >>> >>> >>> On 24 August 2010 23:33, Michel TOKO wrote: >>> Yes i did. *port=8080;mmsc-url= http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* On 24 August 2010 23:24, Emmanuel CHANSON wrote: > Michel, > > > *in my config file the mmsc proxy is set as suggested. > ** > mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > * > Did you replace these values by your config used in your provider > network ? > ie: your mmsc ip address & your mmsc port ? and mms url ? > > You have to. > > Otherwise second solution below with routing. > > Emmanuel > > 2010/8/25 Michel TOKO > > Thanks Emmanuel, >> >> in my config file the mmsc proxy is set as suggested. >> * >> mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> >> May be i've to check your second advice >> >> * >> maybe you can not reach your mms-c cause of some routing not >> configured, check your routing table after ppp0 is up and you can try to >> "telnet mms-c_ip mmsc_port" to see if you reach it. >> >> If not then you have to add a route to reach it, by hand first to >> test, then inside /etc/ppp/ip-up. >> >> Will get back to you very soon. >> >> Thanks >> >> >> On 24 August 2010 22:27, Emmanuel CHANSON >> wrote: >> >>> Hello Michel, >>> >>> >>> *.. >>> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>> [mmsbox-mm1] [n/a] failed to fetch/post content: >>> couldn't >>> connect to host >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >>> ..* >>> >>> I think Mbuni can not reach your MMS-C (provider), so try to see if >>> your MMS-C proxy address and port is correct inside mmsbox.conf: >>> >>> In my case: >>> >>> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >>> >>> this part: >>> >>> *mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>> >>> * >>> I think your problem may be here.* >>> >>> **Or * >>> maybe you can not reach your mms-c cause of some rout
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Yes it should be ok Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is up and rounting is done. Or do this test with mbuni stop and launch ppd by hand *'pppd call mobile-auth'* If you succeed then maybe you post a bad MMS. What is the command you run to post a MMS to Mbuni ? Emmanuel 2010/8/25 Michel TOKO > sorry, > > > netstat -rn > Kernel IP routing table > Destination Gateway Genmask Flags MSS Window irtt > Iface > 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 > ppp0 > 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 > ppp0 > xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 > eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 > eth0 > 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 > eth0 > > is it normal ? > > > On 24 August 2010 23:38, Michel TOKO wrote: > >> Emmanuel, resultat du netstat, >> netstat -rn >> Kernel IP routing table >> Destination Gateway Genmask Flags MSS Window irtt >> Iface >> 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 >> ppp0 >> 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 >> ppp0 >> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 >> eth0 >> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >> eth0 >> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 >> eth0 >> >> un problème ici ? >> >> >> >> On 24 August 2010 23:33, Michel TOKO wrote: >> >>> Yes i did. >>> >>> *port=8080;mmsc-url= >>> http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* >>> >>> >>> On 24 August 2010 23:24, Emmanuel CHANSON wrote: >>> Michel, *in my config file the mmsc proxy is set as suggested. ** mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; * Did you replace these values by your config used in your provider network ? ie: your mmsc ip address & your mmsc port ? and mms url ? You have to. Otherwise second solution below with routing. Emmanuel 2010/8/25 Michel TOKO Thanks Emmanuel, > > in my config file the mmsc proxy is set as suggested. > * > mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > > May be i've to check your second advice > > * > maybe you can not reach your mms-c cause of some routing not > configured, check your routing table after ppp0 is up and you can try to > "telnet mms-c_ip mmsc_port" to see if you reach it. > > If not then you have to add a route to reach it, by hand first to test, > then inside /etc/ppp/ip-up. > > Will get back to you very soon. > > Thanks > > > On 24 August 2010 22:27, Emmanuel CHANSON > wrote: > >> Hello Michel, >> >> >> *.. >> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't >> connect to host >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >> ..* >> >> I think Mbuni can not reach your MMS-C (provider), so try to see if >> your MMS-C proxy address and port is correct inside mmsbox.conf: >> >> In my case: >> >> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >> >> this part: >> >> *mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> >> * >> I think your problem may be here.* >> >> **Or * >> maybe you can not reach your mms-c cause of some routing not >> configured, check your routing table after ppp0 is up and you can try to >> "telnet mms-c_ip mmsc_port" to see if you reach it. >> >> If not then you have to add a route to reach it, by hand first to >> test, then inside /etc/ppp/ip-up. >> >> Regards, >> >> Emmanuel >> >> 2010/8/24 Michel TOKO >> >>> HI Emmanuel, ppp connection is ok using your config but still getting >>> : >>> >>> .. >>> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>> [mmsbox-mm1] [n/a] failed to fetch/post content:
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
sorry, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 is it normal ? On 24 August 2010 23:38, Michel TOKO wrote: > Emmanuel, resultat du netstat, > netstat -rn > Kernel IP routing table > Destination Gateway Genmask Flags MSS Window irtt > Iface > 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 > ppp0 > 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 > ppp0 > xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 > eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 > eth0 > 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 > eth0 > > un problème ici ? > > > > On 24 August 2010 23:33, Michel TOKO wrote: > >> Yes i did. >> >> *port=8080;mmsc-url= >> http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* >> >> >> On 24 August 2010 23:24, Emmanuel CHANSON wrote: >> >>> Michel, >>> >>> >>> *in my config file the mmsc proxy is set as suggested. >>> ** >>> mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 >>> " >>> * >>> Did you replace these values by your config used in your provider network >>> ? >>> ie: your mmsc ip address & your mmsc port ? and mms url ? >>> >>> You have to. >>> >>> Otherwise second solution below with routing. >>> >>> Emmanuel >>> >>> 2010/8/25 Michel TOKO >>> >>> Thanks Emmanuel, in my config file the mmsc proxy is set as suggested. * mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; May be i've to check your second advice * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to "telnet mms-c_ip mmsc_port" to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Will get back to you very soon. Thanks On 24 August 2010 22:27, Emmanuel CHANSON wrote: > Hello Michel, > > > *.. > **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't > connect to host > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: > 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. > 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)! > 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0 > ..* > > I think Mbuni can not reach your MMS-C (provider), so try to see if > your MMS-C proxy address and port is correct inside mmsbox.conf: > > In my case: > > *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* > > this part: > > *mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > > * > I think your problem may be here.* > > **Or * > maybe you can not reach your mms-c cause of some routing not > configured, check your routing table after ppp0 is up and you can try to > "telnet mms-c_ip mmsc_port" to see if you reach it. > > If not then you have to add a route to reach it, by hand first to test, > then inside /etc/ppp/ip-up. > > Regards, > > Emmanuel > > 2010/8/24 Michel TOKO > >> HI Emmanuel, ppp connection is ok using your config but still getting >> : >> >> .. >> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't >> connect to host >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >> 2010-08-25 05:00:01 [5301] [5] INFO: mms
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Emmanuel, resultat du netstat, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 un problème ici ? On 24 August 2010 23:33, Michel TOKO wrote: > Yes i did. > > *port=8080;mmsc-url= > http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* > > > On 24 August 2010 23:24, Emmanuel CHANSON wrote: > >> Michel, >> >> >> *in my config file the mmsc proxy is set as suggested. >> ** >> mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> * >> Did you replace these values by your config used in your provider network >> ? >> ie: your mmsc ip address & your mmsc port ? and mms url ? >> >> You have to. >> >> Otherwise second solution below with routing. >> >> Emmanuel >> >> 2010/8/25 Michel TOKO >> >> Thanks Emmanuel, >>> >>> in my config file the mmsc proxy is set as suggested. >>> * >>> mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 >>> " >>> >>> May be i've to check your second advice >>> >>> * >>> maybe you can not reach your mms-c cause of some routing not configured, >>> check your routing table after ppp0 is up and you can try to "telnet >>> mms-c_ip mmsc_port" to see if you reach it. >>> >>> If not then you have to add a route to reach it, by hand first to test, >>> then inside /etc/ppp/ip-up. >>> >>> Will get back to you very soon. >>> >>> Thanks >>> >>> >>> On 24 August 2010 22:27, Emmanuel CHANSON wrote: >>> Hello Michel, *.. **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 ..* I think Mbuni can not reach your MMS-C (provider), so try to see if your MMS-C proxy address and port is correct inside mmsbox.conf: In my case: *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* this part: *mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; * I think your problem may be here.* **Or * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to "telnet mms-c_ip mmsc_port" to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Regards, Emmanuel 2010/8/24 Michel TOKO > HI Emmanuel, ppp connection is ok using your config but still getting : > > .. > *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't > connect to host > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: > 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. > 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)! > 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0* > .. > > Please did use solve this issue? > > tail -f /var/log/messages > * > .. > Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. > Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 > Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 > Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! > Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded > Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 > Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 > Aug 25 04:56:53 localhost pppd[5547]: prim
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Yes i did. *port=8080;mmsc-url= http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"* On 24 August 2010 23:24, Emmanuel CHANSON wrote: > Michel, > > > *in my config file the mmsc proxy is set as suggested. > ** > mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > * > Did you replace these values by your config used in your provider network ? > ie: your mmsc ip address & your mmsc port ? and mms url ? > > You have to. > > Otherwise second solution below with routing. > > Emmanuel > > 2010/8/25 Michel TOKO > > Thanks Emmanuel, >> >> in my config file the mmsc proxy is set as suggested. >> * >> mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> >> May be i've to check your second advice >> >> * >> maybe you can not reach your mms-c cause of some routing not configured, >> check your routing table after ppp0 is up and you can try to "telnet >> mms-c_ip mmsc_port" to see if you reach it. >> >> If not then you have to add a route to reach it, by hand first to test, >> then inside /etc/ppp/ip-up. >> >> Will get back to you very soon. >> >> Thanks >> >> >> On 24 August 2010 22:27, Emmanuel CHANSON wrote: >> >>> Hello Michel, >>> >>> >>> *.. >>> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >>> ..* >>> >>> I think Mbuni can not reach your MMS-C (provider), so try to see if your >>> MMS-C proxy address and port is correct inside mmsbox.conf: >>> >>> In my case: >>> >>> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >>> >>> this part: >>> >>> *mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>> >>> * >>> I think your problem may be here.* >>> >>> **Or * >>> maybe you can not reach your mms-c cause of some routing not configured, >>> check your routing table after ppp0 is up and you can try to "telnet >>> mms-c_ip mmsc_port" to see if you reach it. >>> >>> If not then you have to add a route to reach it, by hand first to test, >>> then inside /etc/ppp/ip-up. >>> >>> Regards, >>> >>> Emmanuel >>> >>> 2010/8/24 Michel TOKO >>> HI Emmanuel, ppp connection is ok using your config but still getting : .. *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0* .. Please did use solve this issue? tail -f /var/log/messages * .. Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. .* Thanks On 24 August 2010 20:54, Emmanuel CHANSON wrote: > Thanks to Piotr who help me with pppd > > BR > > Emmanuel > > 2010/8/24 Michel TOKO > > Thanks Emmanuel will get back to you. >> >> >> Merci! >> >> On 24 August 2010 09:45, Emmanuel CHANSON >> wrote: >> >>> Nokia 6230 config with Mbuni latest CVS: >>>
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Michel, *in my config file the mmsc proxy is set as suggested. ** mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; * Did you replace these values by your config used in your provider network ? ie: your mmsc ip address & your mmsc port ? and mms url ? You have to. Otherwise second solution below with routing. Emmanuel 2010/8/25 Michel TOKO > Thanks Emmanuel, > > in my config file the mmsc proxy is set as suggested. > * > mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > > May be i've to check your second advice > > * > maybe you can not reach your mms-c cause of some routing not configured, > check your routing table after ppp0 is up and you can try to "telnet > mms-c_ip mmsc_port" to see if you reach it. > > If not then you have to add a route to reach it, by hand first to test, > then inside /etc/ppp/ip-up. > > Will get back to you very soon. > > Thanks > > > On 24 August 2010 22:27, Emmanuel CHANSON wrote: > >> Hello Michel, >> >> >> *.. >> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >> ..* >> >> I think Mbuni can not reach your MMS-C (provider), so try to see if your >> MMS-C proxy address and port is correct inside mmsbox.conf: >> >> In my case: >> >> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >> >> this part: >> >> *mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 >> " >> >> * >> I think your problem may be here.* >> >> **Or * >> maybe you can not reach your mms-c cause of some routing not configured, >> check your routing table after ppp0 is up and you can try to "telnet >> mms-c_ip mmsc_port" to see if you reach it. >> >> If not then you have to add a route to reach it, by hand first to test, >> then inside /etc/ppp/ip-up. >> >> Regards, >> >> Emmanuel >> >> 2010/8/24 Michel TOKO >> >>> HI Emmanuel, ppp connection is ok using your config but still getting : >>> >>> .. >>> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0* >>> .. >>> >>> Please did use solve this issue? >>> >>> tail -f /var/log/messages >>> * >>> .. >>> Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. >>> Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 >>> Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 >>> Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! >>> Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded >>> Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 >>> Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 >>> Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 >>> Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 >>> Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 >>> Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. >>> Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. >>> .* >>> >>> Thanks >>> >>> >>> On 24 August 2010 20:54, Emmanuel CHANSON wrote: >>> Thanks to Piotr who help me with pppd BR Emmanuel 2010/8/24 Michel TOKO Thanks Emmanuel will get back to you. > > > Merci! > > On 24 August 2010 09:45, Emmanuel CHANSON > wrote: > >> Nokia 6230 config with Mbuni latest CVS: >> >> /etc/mbuni/mmsbox.conf: >> - >> ... >> # Sample conf for MMSBox using a modem (MM1) >> group = mmsc >> #id = modem >> id = nokiaphone >> type = custom >> custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >> /var/run/ppp0-mbuni.p
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Thanks Emmanuel, in my config file the mmsc proxy is set as suggested. *mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; May be i've to check your second advice *maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to "telnet mms-c_ip mmsc_port" to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Will get back to you very soon. Thanks On 24 August 2010 22:27, Emmanuel CHANSON wrote: > Hello Michel, > > > *.. > **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: > 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. > 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)! > 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0 > ..* > > I think Mbuni can not reach your MMS-C (provider), so try to see if your > MMS-C proxy address and port is correct inside mmsbox.conf: > > In my case: > > *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* > > this part: > > *mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > > * > I think your problem may be here.* > > **Or * > maybe you can not reach your mms-c cause of some routing not configured, > check your routing table after ppp0 is up and you can try to "telnet > mms-c_ip mmsc_port" to see if you reach it. > > If not then you have to add a route to reach it, by hand first to test, > then inside /etc/ppp/ip-up. > > Regards, > > Emmanuel > > 2010/8/24 Michel TOKO > >> HI Emmanuel, ppp connection is ok using your config but still getting : >> >> .. >> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >> [mmsbox-mm1] [n/a] GPRS turned off returned: 0* >> .. >> >> Please did use solve this issue? >> >> tail -f /var/log/messages >> * >> .. >> Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. >> Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 >> Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 >> Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! >> Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded >> Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 >> Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 >> Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 >> Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 >> Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 >> Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. >> Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. >> .* >> >> Thanks >> >> >> On 24 August 2010 20:54, Emmanuel CHANSON wrote: >> >>> Thanks to Piotr who help me with pppd >>> >>> BR >>> >>> Emmanuel >>> >>> 2010/8/24 Michel TOKO >>> >>> Thanks Emmanuel will get back to you. Merci! On 24 August 2010 09:45, Emmanuel CHANSON wrote: > Nokia 6230 config with Mbuni latest CVS: > > /etc/mbuni/mmsbox.conf: > - > ... > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > #id = modem > id = nokiaphone > type = custom > custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so > ... > > /etc/ppp/peers/mobile-auth: > > file /etc/ppp/peers/options-mobile > user "" > password "" > connect "/usr/sbin/chat -v -t15 -f > /etc/ppp/chatscripts/mobile-modem.chat" > > > /etc/ppp/peers/options-mobile: > > ttyACM0
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Hello Richard, In my case as an MMS, because I use a MMS APN given to all mobile contract here. Emmanuel 2010/8/24 Richard Eicher[Skycore] > Hi Emmanuel, > > > > Question regarding the MM1 Modem – Was your billing attributed as SMS and > Data or as an MMS? > > > > > > Richard Eicher Jr. > > Skycore LLC > > Skycore.com / Cellyspace.com > > [email protected] > > O: 617 314 7688 x706 > > M: 781 492 6436 > > Skype: riche127 > > [image: skycore_logoWebWhite_small] > > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Emmanuel CHANSON > *Sent:* Tuesday, August 24, 2010 4:54 PM > *To:* [email protected] > *Subject:* Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1) > > > > Thanks to Piotr who help me with pppd > > BR > > Emmanuel > > 2010/8/24 Michel TOKO > > Thanks Emmanuel will get back to you. > > > Merci! > > On 24 August 2010 09:45, Emmanuel CHANSON > wrote: > > Nokia 6230 config with Mbuni latest CVS: > > /etc/mbuni/mmsbox.conf: > - > ... > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > #id = modem > id = nokiaphone > type = custom > custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so > ... > > /etc/ppp/peers/mobile-auth: > > file /etc/ppp/peers/options-mobile > user "" > password "" > connect "/usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat" > > > /etc/ppp/peers/options-mobile: > > ttyACM0 > 115200 > lock > crtscts > modem > passive > novj > nodefaultroute > nodetach > noipdefault > usepeerdns > noauth > hide-password > persist > holdoff 10 > maxfail 0 > debug > > /etc/ppp/chatscripts/mobile-modem.chat: > --- > ABORT 'BUSY' > ABORT 'NO CARRIER' > ABORT 'VOICE' > ABORT 'NO DIALTONE' > ABORT 'NO DIAL TONE' > ABORT 'NO ANSWER' > ABORT 'DELAYED' > REPORT CONNECT > TIMEOUT 6 > '' 'ATQ0' > 'OK-AT-OK' 'ATZ' > TIMEOUT 3 > 'OK' @/etc/ppp/chatscripts/pin.NONE > 'OK-AT-OK' 'ATI' > 'OK' 'ATZ' > 'OK' @/etc/ppp/chatscripts/mode.NONE > 'OK-AT-OK' @/etc/ppp/chatscripts/apn > 'OK' 'ATDT*99***1#' > TIMEOUT 30 > CONNECT '' > > /etc/ppp/chatscripts/mode.NONE: > - > AT > > /etc/ppp/chatscripts/pin.NONE: > - > AT > > /etc/ppp/chatscripts/apn: > > AT+CGDCONT=1,"IP","" > > You need 2 additionnal scripts to be launched when modem got the > connection: > > /etc/ppp/ip-up: > > #!/bin/sh > IFNAME="$1" > LOCAL_IP="$4" > REMOTE_IP="$5" > IPPARAM="$6" > MMS_PROXY="192.168.39.201" > /sbin/ip route add to 192.168.39.201 dev ppp0 > # routing has been set up, so: > ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid > > /etc/ppp/ip-down: > - > # remove pid file > rm -rf /var/run/ppp0-mbuni.pid > > > Regards, > > Emmanuel > > 2010/8/24 patrick meye > > Hi Emmanuel, > > I need config files using Nokia 6230,can you send it to me please?? > > Regards. > > *Patrick* > > > -- > > *De :* Emmanuel CHANSON > *À :* [email protected] > *Envoyé le :* Mar 24 août 2010, 0h 59min 12s > *Objet :* [Users] Mbuni & Huawei E220 > > > Does anyone has already configured a Huawei E220 with Mbuni and pppd ? > > I am looking for any config with E220. > > Note: I use actually a Nokia 6230 that work well if anybody needs config > files. > > Regards, > > -- > Emmanuel > > > > > > ___ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > > > ___ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > <>___ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Hello Michel, *.. **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 ..* I think Mbuni can not reach your MMS-C (provider), so try to see if your MMS-C proxy address and port is correct inside mmsbox.conf: In my case: *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* this part: *mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; *I think your problem may be here.* **Or * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to "telnet mms-c_ip mmsc_port" to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Regards, Emmanuel 2010/8/24 Michel TOKO > HI Emmanuel, ppp connection is ok using your config but still getting : > > .. > *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: > 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 > 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. > 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 > [mmsbox-mm1] [n/a] Sending failed: (none), (none)! > 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 > [mmsbox-mm1] [n/a] GPRS turned off returned: 0* > .. > > Please did use solve this issue? > > tail -f /var/log/messages > * > .. > Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. > Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 > Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 > Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! > Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded > Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 > Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 > Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 > Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 > Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 > Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. > Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. > .* > > Thanks > > > On 24 August 2010 20:54, Emmanuel CHANSON wrote: > >> Thanks to Piotr who help me with pppd >> >> BR >> >> Emmanuel >> >> 2010/8/24 Michel TOKO >> >> Thanks Emmanuel will get back to you. >>> >>> >>> Merci! >>> >>> On 24 August 2010 09:45, Emmanuel CHANSON wrote: >>> Nokia 6230 config with Mbuni latest CVS: /etc/mbuni/mmsbox.conf: - ... # Sample conf for MMSBox using a modem (MM1) group = mmsc #id = modem id = nokiaphone type = custom custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so ... /etc/ppp/peers/mobile-auth: file /etc/ppp/peers/options-mobile user "" password "" connect "/usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat" /etc/ppp/peers/options-mobile: ttyACM0 115200 lock crtscts modem passive novj nodefaultroute nodetach noipdefault usepeerdns noauth hide-password persist holdoff 10 maxfail 0 debug /etc/ppp/chatscripts/mobile-modem.chat: --- ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'ATQ0' 'OK-AT-OK' 'ATZ' TIMEOUT 3 'OK' @/etc/ppp/chatscripts/pin.NONE 'OK-AT-OK' 'ATI' 'OK' 'ATZ' 'OK' @/etc/ppp/chatscripts/mode.NONE 'OK-AT-OK' @/etc/ppp/chatscripts/apn
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
HI Emmanuel, ppp connection is ok using your config but still getting : .. *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 [mmsbox-mm1] [n/a] GPRS turned off returned: 0* .. Please did use solve this issue? tail -f /var/log/messages * .. Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> /dev/ttyUSB0 Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. .* Thanks On 24 August 2010 20:54, Emmanuel CHANSON wrote: > Thanks to Piotr who help me with pppd > > BR > > Emmanuel > > 2010/8/24 Michel TOKO > > Thanks Emmanuel will get back to you. >> >> >> Merci! >> >> On 24 August 2010 09:45, Emmanuel CHANSON wrote: >> >>> Nokia 6230 config with Mbuni latest CVS: >>> >>> /etc/mbuni/mmsbox.conf: >>> - >>> ... >>> # Sample conf for MMSBox using a modem (MM1) >>> group = mmsc >>> #id = modem >>> id = nokiaphone >>> type = custom >>> custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>> mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so >>> ... >>> >>> /etc/ppp/peers/mobile-auth: >>> >>> file /etc/ppp/peers/options-mobile >>> user "" >>> password "" >>> connect "/usr/sbin/chat -v -t15 -f >>> /etc/ppp/chatscripts/mobile-modem.chat" >>> >>> >>> /etc/ppp/peers/options-mobile: >>> >>> ttyACM0 >>> 115200 >>> lock >>> crtscts >>> modem >>> passive >>> novj >>> nodefaultroute >>> nodetach >>> noipdefault >>> usepeerdns >>> noauth >>> hide-password >>> persist >>> holdoff 10 >>> maxfail 0 >>> debug >>> >>> /etc/ppp/chatscripts/mobile-modem.chat: >>> --- >>> ABORT 'BUSY' >>> ABORT 'NO CARRIER' >>> ABORT 'VOICE' >>> ABORT 'NO DIALTONE' >>> ABORT 'NO DIAL TONE' >>> ABORT 'NO ANSWER' >>> ABORT 'DELAYED' >>> REPORT CONNECT >>> TIMEOUT 6 >>> '' 'ATQ0' >>> 'OK-AT-OK' 'ATZ' >>> TIMEOUT 3 >>> 'OK' @/etc/ppp/chatscripts/pin.NONE >>> 'OK-AT-OK' 'ATI' >>> 'OK' 'ATZ' >>> 'OK' @/etc/ppp/chatscripts/mode.NONE >>> 'OK-AT-OK' @/etc/ppp/chatscripts/apn >>> 'OK' 'ATDT*99***1#' >>> TIMEOUT 30 >>> CONNECT '' >>> >>> /etc/ppp/chatscripts/mode.NONE: >>> - >>> AT >>> >>> /etc/ppp/chatscripts/pin.NONE: >>> - >>> AT >>> >>> /etc/ppp/chatscripts/apn: >>> >>> AT+CGDCONT=1,"IP","" >>> >>> You need 2 additionnal scripts to be launched when modem got the >>> connection: >>> >>> /etc/ppp/ip-up: >>> >>> #!/bin/sh >>> IFNAME="$1" >>> LOCAL_IP="$4" >>> REMOTE_IP="$5" >>> IPPARAM="$6" >>> MMS_PROXY="192.168.39.201" >>> /sbin/ip route add to 192.168.39.201 dev ppp0 >>> # routing has been set up, so: >>> ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid >>> >>> /etc/ppp/ip-down: >>> - >>> # remove pid file >>> rm -rf /var/run/ppp0-mbuni.pid >>> >>> >>> Regards, >>> >>> Emmanuel >>> >>> >>> 2010/8/24 patrick meye >>> Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. Patrick -- *De :* Emmanuel CHANSON *À :* [email protected] *Envoyé le :* Mar 24 août 2010, 0h 59min 12s *Objet :* [Users] Mbuni & Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel >>> ___ >>>
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Thanks to Piotr who help me with pppd BR Emmanuel 2010/8/24 Michel TOKO > Thanks Emmanuel will get back to you. > > > Merci! > > On 24 August 2010 09:45, Emmanuel CHANSON wrote: > >> Nokia 6230 config with Mbuni latest CVS: >> >> /etc/mbuni/mmsbox.conf: >> - >> ... >> # Sample conf for MMSBox using a modem (MM1) >> group = mmsc >> #id = modem >> id = nokiaphone >> type = custom >> custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >> http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >> mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so >> ... >> >> /etc/ppp/peers/mobile-auth: >> >> file /etc/ppp/peers/options-mobile >> user "" >> password "" >> connect "/usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat" >> >> >> /etc/ppp/peers/options-mobile: >> >> ttyACM0 >> 115200 >> lock >> crtscts >> modem >> passive >> novj >> nodefaultroute >> nodetach >> noipdefault >> usepeerdns >> noauth >> hide-password >> persist >> holdoff 10 >> maxfail 0 >> debug >> >> /etc/ppp/chatscripts/mobile-modem.chat: >> --- >> ABORT 'BUSY' >> ABORT 'NO CARRIER' >> ABORT 'VOICE' >> ABORT 'NO DIALTONE' >> ABORT 'NO DIAL TONE' >> ABORT 'NO ANSWER' >> ABORT 'DELAYED' >> REPORT CONNECT >> TIMEOUT 6 >> '' 'ATQ0' >> 'OK-AT-OK' 'ATZ' >> TIMEOUT 3 >> 'OK' @/etc/ppp/chatscripts/pin.NONE >> 'OK-AT-OK' 'ATI' >> 'OK' 'ATZ' >> 'OK' @/etc/ppp/chatscripts/mode.NONE >> 'OK-AT-OK' @/etc/ppp/chatscripts/apn >> 'OK' 'ATDT*99***1#' >> TIMEOUT 30 >> CONNECT '' >> >> /etc/ppp/chatscripts/mode.NONE: >> - >> AT >> >> /etc/ppp/chatscripts/pin.NONE: >> - >> AT >> >> /etc/ppp/chatscripts/apn: >> >> AT+CGDCONT=1,"IP","" >> >> You need 2 additionnal scripts to be launched when modem got the >> connection: >> >> /etc/ppp/ip-up: >> >> #!/bin/sh >> IFNAME="$1" >> LOCAL_IP="$4" >> REMOTE_IP="$5" >> IPPARAM="$6" >> MMS_PROXY="192.168.39.201" >> /sbin/ip route add to 192.168.39.201 dev ppp0 >> # routing has been set up, so: >> ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid >> >> /etc/ppp/ip-down: >> - >> # remove pid file >> rm -rf /var/run/ppp0-mbuni.pid >> >> >> Regards, >> >> Emmanuel >> >> >> 2010/8/24 patrick meye >> >>> Hi Emmanuel, >>> >>> I need config files using Nokia 6230,can you send it to me please?? >>> >>> Regards. >>> >>> Patrick >>> >>> -- >>> *De :* Emmanuel CHANSON >>> *À :* [email protected] >>> *Envoyé le :* Mar 24 août 2010, 0h 59min 12s >>> *Objet :* [Users] Mbuni & Huawei E220 >>> >>> Does anyone has already configured a Huawei E220 with Mbuni and pppd ? >>> >>> I am looking for any config with E220. >>> >>> Note: I use actually a Nokia 6230 that work well if anybody needs config >>> files. >>> >>> Regards, >>> >>> -- >>> Emmanuel >>> >>> >> ___ >> Users mailing list >> [email protected] >> http://lists.mbuni.org/mailman/listinfo/users >> >> > ___ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > > -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02 Mobile France: +33 (0) 6.68.03.89.56 @email : [email protected] ___ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni & Nokia 6230 configuration (mmsbox-mm1)
Thanks Emmanuel will get back to you. Merci! On 24 August 2010 09:45, Emmanuel CHANSON wrote: > Nokia 6230 config with Mbuni latest CVS: > > /etc/mbuni/mmsbox.conf: > - > ... > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > #id = modem > id = nokiaphone > type = custom > custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= > http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; > mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so > ... > > /etc/ppp/peers/mobile-auth: > > file /etc/ppp/peers/options-mobile > user "" > password "" > connect "/usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat" > > > /etc/ppp/peers/options-mobile: > > ttyACM0 > 115200 > lock > crtscts > modem > passive > novj > nodefaultroute > nodetach > noipdefault > usepeerdns > noauth > hide-password > persist > holdoff 10 > maxfail 0 > debug > > /etc/ppp/chatscripts/mobile-modem.chat: > --- > ABORT 'BUSY' > ABORT 'NO CARRIER' > ABORT 'VOICE' > ABORT 'NO DIALTONE' > ABORT 'NO DIAL TONE' > ABORT 'NO ANSWER' > ABORT 'DELAYED' > REPORT CONNECT > TIMEOUT 6 > '' 'ATQ0' > 'OK-AT-OK' 'ATZ' > TIMEOUT 3 > 'OK' @/etc/ppp/chatscripts/pin.NONE > 'OK-AT-OK' 'ATI' > 'OK' 'ATZ' > 'OK' @/etc/ppp/chatscripts/mode.NONE > 'OK-AT-OK' @/etc/ppp/chatscripts/apn > 'OK' 'ATDT*99***1#' > TIMEOUT 30 > CONNECT '' > > /etc/ppp/chatscripts/mode.NONE: > - > AT > > /etc/ppp/chatscripts/pin.NONE: > - > AT > > /etc/ppp/chatscripts/apn: > > AT+CGDCONT=1,"IP","" > > You need 2 additionnal scripts to be launched when modem got the > connection: > > /etc/ppp/ip-up: > > #!/bin/sh > IFNAME="$1" > LOCAL_IP="$4" > REMOTE_IP="$5" > IPPARAM="$6" > MMS_PROXY="192.168.39.201" > /sbin/ip route add to 192.168.39.201 dev ppp0 > # routing has been set up, so: > ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid > > /etc/ppp/ip-down: > - > # remove pid file > rm -rf /var/run/ppp0-mbuni.pid > > > Regards, > > Emmanuel > > > 2010/8/24 patrick meye > >> Hi Emmanuel, >> >> I need config files using Nokia 6230,can you send it to me please?? >> >> Regards. >> >> Patrick >> >> -- >> *De :* Emmanuel CHANSON >> *À :* [email protected] >> *Envoyé le :* Mar 24 août 2010, 0h 59min 12s >> *Objet :* [Users] Mbuni & Huawei E220 >> >> Does anyone has already configured a Huawei E220 with Mbuni and pppd ? >> >> I am looking for any config with E220. >> >> Note: I use actually a Nokia 6230 that work well if anybody needs config >> files. >> >> Regards, >> >> -- >> Emmanuel >> >> > ___ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > > ___ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
