Re: [ovirt-users] VM has been paused due to storage I/O problem

2017-02-01 Thread Gianluca Cecchi
On Wed, Feb 1, 2017 at 8:22 PM, Gianluca Cecchi wrote: > > OK. In the mean time I have applied your suggested config and restarted > the 2 nodes. > Let we test and see if I find any problems running also some I/O tests. > Thanks in the mean time, > Gianluca > Quick

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Nicolas Ecarnot
Le 01/02/2017 à 18:18, Nicolas Ecarnot a écrit : Le 01/02/2017 à 17:37, Michael Watters a écrit : I have ovirt-engine 3.6 set up on a dedicated host which is managing two ovirt hosts. I am seeing errors when the engine attempts to check for updates as follows. Failed to check for available

[ovirt-users] How to update ovirt nodes

2017-02-01 Thread Shalabh Goel
Hi Ovirt 4.1 has been released, I want to to know how to upgrade the Ovirt nodes to 4.1. I was able to upgrade ovirt-engine but I could not find how to upgrade node. Thank You -- Shalabh Goel ___ Users mailing list Users@ovirt.org

[ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Nicolas Ecarnot
Hello, I'm starting over on this subject because I wanted to clarify what was the oVirt way to manage multipathing. (Here I will talk only about the data/iSCSI/SAN/LUN/you name it networks.) According to what I see in the host network setup, one can assign *ONE* data network to an interface

Re: [ovirt-users] "Setup Host Networks" fails (was: Ovirt 4 failing to setup CentOS 7.2 host (everything default))

2017-02-01 Thread Edward Haas
The server seems to have a special network configuration that limits its communication to the Gateway through SCOPE definition. IPADDR=176.9.146.137 NETMASK=255.255.255.255 SCOPE="peer 176.9.146.129" oVirt host does not support such a setup. VDSM acquires the iface and tries to configure it based

[ovirt-users] [ANN] oVirt 4.1.0 Release is now available

2017-02-01 Thread Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the oVirt 4.1.0 Release, as of February 1st, 2017 This major release update is the first of the 4.1 release series. 4.1.0 brings more than 260 enhancements and 790 bugfixes, including 340 high or urgent severity fixes, on top of oVirt

Re: [ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Yura Poltoratskiy
Hi, As for me personally I have such a config: compute nodes with 4x1G nics and storages with 2x1G nics and 2 switches (not stackable). All servers runs on CentOS 7.X (7.3 at this monent). On compute nodes I have bonding with two nic1 and nic2 (attached to different switches) for mgmt and

Re: [ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Pavel Gashev
Nicolas, Take a look at http://www.ovirt.org/documentation/admin-guide/chap-Storage/#configuring-iscsi-multipathing The recommended way is to use different VLANs. Equallogic has to be connected to the different VLANs as well. On Wed, 2017-02-01 at 11:50 +0100, Nicolas Ecarnot wrote: Hello,

Re: [ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Nicolas Ecarnot
Hello, Before replying further, may I ask you, Yura, to post a screenshot of your iSCSI multipathing setup in the web GUI? And also the same for the network setup of a host ? Thank you. -- Nicolas ECARNOT Le 01/02/2017 à 13:14, Yura Poltoratskiy a écrit : Hi, As for me personally I have

Re: [ovirt-users] Request for oVirt Ansible modules testing feedback

2017-02-01 Thread Jiří Sléžka
Hi Ondra, I am testing oVirt ansible modules and I am stucked in this simple scenario. I would like to create a new vm with new bootable disk attached to it. I wrote this simple role for it http://pastebin.com/XwwyCH4b when I run it I got $ ansible-playbook site.yml PLAY [create ovirt

Re: [ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Nicolas Ecarnot
Le 01/02/2017 à 15:31, Yura Poltoratskiy a écrit : Here you are: iSCSI multipathing network setup of a host 01.02.2017 15:31, Nicolas Ecarnot пишет:

Re: [ovirt-users] Multipath handling in oVirt

2017-02-01 Thread Yura Poltoratskiy
Here you are: iSCSI multipathing network setup of a host 01.02.2017 15:31, Nicolas Ecarnot пишет: Hello, Before replying further, may I ask you, Yura,

Re: [ovirt-users] Request for oVirt Ansible modules testing feedback

2017-02-01 Thread Ondra Machacek
On Wed, Feb 1, 2017 at 3:27 PM, Jiří Sléžka wrote: > Hi Ondra, > > > I am testing oVirt ansible modules and I am stucked in this simple scenario. > I would like to create a new vm with new bootable disk attached to it. > > I wrote this simple role for it > >

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Nicolas Ecarnot
Le 01/02/2017 à 17:37, Michael Watters a écrit : I have ovirt-engine 3.6 set up on a dedicated host which is managing two ovirt hosts. I am seeing errors when the engine attempts to check for updates as follows. Failed to check for available updates on host ovirt-node-production2 with message

Re: [ovirt-users] Request for oVirt Ansible modules testing feedback

2017-02-01 Thread Jiří Sléžka
Hi, On 02/01/2017 04:06 PM, Ondra Machacek wrote: On Wed, Feb 1, 2017 at 3:27 PM, Jiří Sléžka wrote: Hi Ondra, I am testing oVirt ansible modules and I am stucked in this simple scenario. I would like to create a new vm with new bootable disk attached to it. I wrote

[ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Michael Watters
I have ovirt-engine 3.6 set up on a dedicated host which is managing two ovirt hosts. I am seeing errors when the engine attempts to check for updates as follows. Failed to check for available updates on host ovirt-node-production2 with message 'Command returned failure code 1 during SSH

Re: [ovirt-users] NIC Teaming x Bonding

2017-02-01 Thread Fernando Frediani
Well, I just found that Teaming doesn't seem to be recognized by oVirt, only Bonding. Am I correct ? Fernando On 30/01/2017 12:59, Fernando Frediani wrote: Has anyone used NIC Teaming in production with oVirt Node ? How are you finding it compared to Bonding ? Has it helped in some way

Re: [ovirt-users] NIC Teaming x Bonding

2017-02-01 Thread Yaniv Kaul
On Wed, Feb 1, 2017 at 8:06 PM, Fernando Frediani < fernando.fredi...@upx.com.br> wrote: > Well, I just found that Teaming doesn't seem to be recognized by oVirt, > only Bonding. Am I correct ? Yes, that's correct. Does it make a difference in your deployment? Y. > > Fernando > > > > On

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Michael Watters
I don't think IPv6 is the cause. When the engine checks for updates there is a yum error shown in the debug logs as follows. 2017-02-01 10:38:39 INFO otopi.plugins.ovirt_host_mgmt.packages.update update.info:98 Yum: Performing yum transaction rollback 2017-02-01 10:38:39 DEBUG otopi.context

Re: [ovirt-users] VM has been paused due to storage I/O problem

2017-02-01 Thread Gianluca Cecchi
On Wed, Feb 1, 2017 at 8:39 AM, Nir Soffer wrote: > > > Hi Gianluca, > > This should be a number, not a string, maybe multipath is having trouble > parsing this and it ignores your value? > I don't think so. Also because reading dm multipath guide at

Re: [ovirt-users] NIC Teaming x Bonding

2017-02-01 Thread Fernando Frediani
Hi Yaniv. Not that much. As I am starting a new environment I wanted to make usage of some new features present in Teaming. Guess suport will come soon. Thanks for replying. Fernando On 01/02/2017 16:49, Yaniv Kaul wrote: On Wed, Feb 1, 2017 at 8:06 PM, Fernando Frediani

Re: [ovirt-users] VM has been paused due to storage I/O problem

2017-02-01 Thread Michael Watters
I'm also seeing this error using a Dell MD3800i array. The multipath errors shown in our logs are different however. Feb 1 15:11:58 ovirt-node-production2 kernel: dd: sending ioctl 80306d02 to a partition! Feb 1 15:21:01 ovirt-node-production2 multipathd: dm-31: remove map (uevent) Feb 1

[ovirt-users] a2fcc701-96ed-2bdc-dd98-630e814b7...@ecarnot.net

2017-02-01 Thread Victor Jose Acosta
Hello ovirt-imageio-daemon is part of ovirt 4 repository, is your engine version 4 or 3.6? -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] ovirt-engine failed to check for updates (Nicolas Ecarnot)

2017-02-01 Thread Victor Jose Acosta
Hello ovirt-imageio-daemon is part of ovirt 4 repository, is your engine version 4 or 3.6? On 01/02/17 16:22, users-requ...@ovirt.org wrote: Send Users mailing list submissions to users@ovirt.org To subscribe or unsubscribe via the World Wide Web, visit

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Victor Jose Acosta
Hello ovirt-imageio-daemon is part of ovirt 4 repository, is your engine version 4 or 3.6? On 01/02/17 16:37, users-requ...@ovirt.org wrote: Send Users mailing list submissions to users@ovirt.org To subscribe or unsubscribe via the World Wide Web, visit

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Michael Watters
The engine is 4.0, the host nodes are running 3.6 with VDSM 4.17.35. On 02/01/2017 02:41 PM, Victor Jose Acosta wrote: > Hello > > ovirt-imageio-daemon is part of ovirt 4 repository, is your engine > version 4 or 3.6? ___ Users mailing list

Re: [ovirt-users] ovirt-engine failed to check for updates

2017-02-01 Thread Victor Jose Acosta
So, that's the problem, engine is looking for updates for version 4, it does not matter if your node is version 3.6, i think this is a bug. Engine should be looking for node version updates instead of engine version. On 01/02/17 17:33, users-requ...@ovirt.org wrote: Re: ovirt-engine failed