Re: [ovirt-users] oVirt Hosted Engine Setup fails

2017-03-15 Thread Simone Tiraboschi
On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar < manuel.luis.az...@gmail.com> wrote: > Hello Simone, > > The quoted lines on your last message are on lines 1238-1245 on the > attached log ovirt-hosted-engine-setup file. > > That file is the first hosted-engine setup. But this log file is not

Re: [ovirt-users] Suggestion for configuration with only 2 nics and equallogic ISCSI

2017-03-15 Thread Gianluca Cecchi
On Tue, Mar 14, 2017 at 7:00 PM, Phil Meyer wrote: > > You can create a bonded interface, with as many physicals as you need. > You can then create tagged interfaces on the bonded interfaces. > You can then create bridges to those, with or without IPs depending > on what

[ovirt-users] add a machine to center again

2017-03-15 Thread 单延明
Hi everyone, When I add a machine to center again, I got some error? I don’t want to change the machine’s name. Error while executing action: Cannot add Host. The Host name is already in use, please choose a unique name and try again. shan yanming 单延明

Re: [ovirt-users] oVirt Hosted Engine Setup fails

2017-03-15 Thread Manuel Luis Aznar
Hello there again, Yes that is correct. I interrupted the setup with Ctrl+C. That was because while I was answering, at the same time, I was looking at this file, and I saw this: FAILED: conflicting vdsm and libvirt-qemu tls configuration. vdsm.conf with ssl=True requires the following changes:

Re: [ovirt-users] oVIRT 3.5 / Virtual Machine / 10GB possible?

2017-03-15 Thread Yaniv Kaul
On Wed, Mar 15, 2017 at 11:14 AM Phil Meyer wrote: > On 03/14/2017 12:50 PM, Devin Acosta wrote: > > > > Yaniv, > > > > So are you telling me that the virtual machine will get 10Gbit speeds > > even though it only reports 1Gbit? > > It is up to the driver used on the VM

Re: [ovirt-users] Suggestion for configuration with only 2 nics and equallogic ISCSI

2017-03-15 Thread Phil Meyer
On 03/14/2017 06:16 AM, Gianluca Cecchi wrote: > Hello, > I'm going to configure an environment where I would have: > - 2 x 1Gbit/s nics that I have to dedicate to ovirt mgmt network only, > due to design constraints > > - 2 x 10Gbit/s nics where I have to configure all other VLANS > > In

Re: [ovirt-users] oVIRT 3.5 / Virtual Machine / 10GB possible?

2017-03-15 Thread Phil Meyer
On 03/14/2017 12:50 PM, Devin Acosta wrote: > > Yaniv, > > So are you telling me that the virtual machine will get 10Gbit speeds > even though it only reports 1Gbit? It is up to the driver used on the VM and what the qemu process does with it. by default, neither libvirt or vdsm will mess with

Re: [ovirt-users] add a machine to center again

2017-03-15 Thread Arman Khalatyan
remove simply the host id from /etc/vdsm/vdsm.id On Wed, Mar 15, 2017 at 11:03 AM, 单延明 wrote: > Hi everyone, > > > > When I add a machine to center again, I got some error? > > I don’t want to change the machine’s name. > > > > Error while executing action: Cannot add

[ovirt-users] Delete ISO from ISO storage

2017-03-15 Thread Juan Jose
Hello everybody, I have a 3.5.0.1-1.el6 ovirt infrastructure installed and with many ISO uploaded in my ISO storage. Is there some way to delete unusable ISOs from my ISO storage?, Many thanks in advanced, Juanjo. ___ Users mailing list

Re: [ovirt-users] upgrade 3.5 to 3.6 auto import storage domain failed

2017-03-15 Thread Резников А . А .
15.03.2017 10:35, Simone Tiraboschi пишет: On Wed, Mar 15, 2017 at 6:24 AM, Резников А.А. > wrote: 14.03.2017 11:40, Резников А.А. пишет: Hi list! During the upgrade ovirt from 3.5 to 3.6, I get errors:

Re: [ovirt-users] Delete ISO from ISO storage

2017-03-15 Thread Luca 'remix_tj' Lorenzetto
On Wed, Mar 15, 2017 at 1:19 PM, Juan Jose wrote: > Hello everybody, > > I have a 3.5.0.1-1.el6 ovirt infrastructure installed and with many ISO > uploaded in my ISO storage. Is there some way to delete unusable ISOs from > my ISO storage?, > Hello, you can simply remove

Re: [ovirt-users] oVirt 4.1 Dashboard

2017-03-15 Thread Andrea Ghelardi
Cheers ☺ @Shirley: being this the second report of the same issue, probably there is really a bug/problem somewhere? AG From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Arsène Gschwind Sent: Wednesday, March 15, 2017 8:22 AM To: Shirly Radco Cc:

Re: [ovirt-users] Suggestion for configuration with only 2 nics and equallogic ISCSI

2017-03-15 Thread Phil Meyer
On 03/15/2017 04:24 AM, Gianluca Cecchi wrote: > ... > that I can't do because the storage target is EQL and they don't > support bonding way to connect ... There is more than one way to do bonded interfaces. You must be doing something other than LACP. Using LACP, (mode=4) the bonded interfaces

Re: [ovirt-users] Error on Node upgrade 2

2017-03-15 Thread FERNANDO FREDIANI
Find it attached Yuval. Fernando On 14/03/2017 18:21, Yuval Turgeman wrote: Adding Ryan, Fernando, can you please attach /tmp/imgbased.log ? On Mar 13, 2017 2:43 PM, "FERNANDO FREDIANI" > wrote: Hi Yedidyah. Running

Re: [ovirt-users] oVirt 4.1 Dashboard

2017-03-15 Thread Nelson Lameiras
Hello, We had the same problem for almost a year, and the solution proposed in https://bugzilla.redhat.com/show_bug.cgi?id=1414379 worked perfectly for us! yay!!! cordialement, regards, Nelson LAMEIRAS Ingénieur Systèmes et Réseaux / Systems and Networks engineer Tel: +33 5 32

Re: [ovirt-users] Delete ISO from ISO storage

2017-03-15 Thread Luca 'remix_tj' Lorenzetto
On Wed, Mar 15, 2017 at 1:32 PM, Juan Jose wrote: > Ok, many thanks, > > I though that delete it directly woulb be some bad impact in the DB. I have > deleted and it has worked properly. > No issues, since it does a rescan of the contents of the directory. Luca -- "E'

[ovirt-users] Error on Adding Host

2017-03-15 Thread FERNANDO FREDIANI
Hi folks. I think I have been hit by the most annoying error you can get on oVirt. I have removed a Host from Engine, re-installed it with the latest ovirt-node-ng ISO, tried to add the freshly installed Host back to Engine and got the following error: "Command returned failure code 1 during SSH

[ovirt-users] host node non-operational

2017-03-15 Thread Angel R. Gonzalez
Hello, I've installed a engine server and 2 host nodes. After install the 2 nodes I've configured a nfs domain storage in the first node. After few minutes, the second host is down and I dont put it online. The log in the engine show: >Host node2 cannot access the Storage Domain(s)

[ovirt-users] Windows 2012 VM novnc mouse not in vnc

2017-03-15 Thread William Cooley
When connecting to a Windows 2012 VM using the novnc web console the mouse is offset by fair bit. The distance changes depending on from where you enter the console area. Is there some way to fix this? William ___ Users mailing list Users@ovirt.org

Re: [ovirt-users] Serious Trouble - Lost Domains

2017-03-15 Thread Fred Rolland
Here are the feature page for importing storage domain : [1] Can you provide more information on the error when you tried to import ? [1] https://www.ovirt.org/develop/release-management/features/storage/importstoragedomain/ On Tue, Mar 14, 2017 at 1:46 PM, JC Clark wrote:

Re: [ovirt-users] oVirt 4.1.0 - Gluster - Hosted Engine deploy howto

2017-03-15 Thread NUNIN Roberto
Hi kasturi >> Hosted Engine tab is visible only after hosted_storage and hosted_engine vm is imported to the >>cluster. Once the first node is installed, you will need to create a storage domain of vmstore or >>data volume . Data storage domain is already created and activated. I've also

Re: [ovirt-users] oVirt 4.1.0 - Gluster - Hosted Engine deploy howto

2017-03-15 Thread knarra
Hi Roberto, Hosted Engine tab is visible only after hosted_storage and hosted_engine vm is imported to the cluster. Once the first node is installed, you will need to create a storage domain of vmstore or data volume . Once one of these storage domains are created, hosted_storage and

Re: [ovirt-users] upgrade 3.5 to 3.6 auto import storage domain failed

2017-03-15 Thread Simone Tiraboschi
On Wed, Mar 15, 2017 at 6:24 AM, Резников А.А. wrote: > 14.03.2017 11:40, Резников А.А. пишет: > >> Hi list! >> >> During the upgrade ovirt from 3.5 to 3.6, I get errors: >> "VDSM command failed: Can not acquire host id: >> (u'8905c9ac-d892-478d-8346-63b8fa1c5763 ',

Re: [ovirt-users] hosted engine without the appliance?

2017-03-15 Thread Yedidyah Bar David
On Tue, Mar 14, 2017 at 7:49 PM, Devin A. Bougie wrote: > Hi, All. Is it still possible or supported to run a hosted engine without > using the oVirt Engine Appliance? In other words, to install our own OS on a > VM and have it act as a hosted engine? "hosted-engine

Re: [ovirt-users] oVirt 4.1 Dashboard

2017-03-15 Thread Arsène Gschwind
Hi, When creating the bug report I've found a similar bug https://bugzilla.redhat.com/show_bug.cgi?id=1414379. I've tried the provided solution and it did work for me, now the Dashboard shows everything. Thanks a lot for your help. Regards, Arsène On 03/13/2017 08:26 PM, Shirly Radco

Re: [ovirt-users] Error on Node upgrade 2

2017-03-15 Thread FERNANDO FREDIANI
Well, this failed badly. In another try it did the upgrade to the newer version it was not being able to do before, but upon reboot several services fail to start and the host doesn't come up. I then rebooted into the previous version. A complete re-install seems to be the only option. Seems