On Fri, Jun 16, 2017 at 6:27 PM, Gianluca Cecchi
wrote:
> Hello,
> between problems solved in upcoming 4.1.3 release I see this:
>
> Lost Connection After Host Deploy when 4.1.3 Host Added to 4.1.2 Engine
> tracked by
>
Good day oVirt Users,
I need some little help. I have a KVM and used oVirt for the management of
VMs. What I want is that my client will log on to their account and access
their virtual machine using their Smart phone. I tried to install mOvirt
and yes can connect to the console of my machine,
Hi.
I'm trying to set up a 3 node ovirt cluster with gluster as this guide
describes:
https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/
I've installed oVirt node 4.1.2 in one partition and left a partition to
hold the gluster volumes on all three nodes. The
On Fri, Jun 16, 2017 at 5:20 PM, Gianluca Cecchi
wrote:
> On Thu, Apr 27, 2017 at 11:25 AM, Evgenia Tokar wrote:
>
>> Hi,
>>
>> It looks like the graphical console fields are not editable for hosted
>> engine vm.
>> We are trying to figure out how
Thanks. I did this previously and got many errors and it didn't work. Since
then I have tried several thing, one of which was reinitialize lockspace as the
errors seemed to indicate that might be the problem.
Now I was able to run the clean-metadata command successfully.
Will that command fail
On Fri, Jun 16, 2017 at 9:11 AM, Andrew Dent wrote:
> Hi
>
> Well I've got myself into a fine mess.
>
> host01 was setup with hosted-engine v4.1. This was successful.
> Imported 3 VMs from a v3.6 OVirt AIO instance. (This OVirt 3.6 is still
> running with more VMs on it)
Hey Team!
We are trying to nest some of our existing technology into the oVirt host
as to not have to reinvent tooling, etc. Our proposal is to have a
sub-interface on the 10G nic and place the VMs in that network. The network
will be advertised to the Top of Rack switch via BGP.
My current
If I reinstall and the rerun the hosted-engine setup how do I get the VMs in
their current running state back into and being recognised by the new hosted
engine?
Kind regards
Andrew
> On 17 Jun 2017, at 6:54 AM, Yaniv Kaul wrote:
>
>
>
>> On Fri, Jun 16, 2017 at 9:11 AM,
Hi,
grafton_sanity_check.sh checks if the disk has any labels or
partitions present on it. Since your disk has already a partition and
you are using the same disk to create gluster brick as well it fails.
commenting out this script in the conf file and running again would
resolve your
Hi,
we just set up a new 4.1.2 OVirt cluster. It is a quite normal
HDD/XFS/NFS stack that worked quit well with 4.0 in the past.
Inside the VMs we use XFS too.
To our surprise we observe abysmal high IO during mkfs.xfs
and fstrim inside the VM. A simple example:
Step 1: Create 100G Thin disk
> Le 16 juin 2017 à 10:13, Juan Hernández a écrit :
>
> On 06/16/2017 09:52 AM, Fabrice Bacchella wrote:
>> I just read the blog entry about performance increate in for the python sdk
>> (https://www.ovirt.org/blog/2017/05/higher-performance-for-python-sdk/).
>>
>> I'm
I just read the blog entry about performance increate in for the python sdk
(https://www.ovirt.org/blog/2017/05/higher-performance-for-python-sdk/).
I'm quite sceptical about pipelining.
A few explanation about that can be found at:
Hi,
It seems like some storage issue, could you please share your engine logs?
Regards
Martin Perina
On Thursday, June 15, 2017, khalid mahmood wrote:
> Dear Users
> Procedure :
> 1- create clean volume replica 2 distributed with glusterfs .
> 2- create clean
On 06/16/2017 09:52 AM, Fabrice Bacchella wrote:
> I just read the blog entry about performance increate in for the python sdk
> (https://www.ovirt.org/blog/2017/05/higher-performance-for-python-sdk/).
>
> I'm quite sceptical about pipelining.
>
> A few explanation about that can be found at:
>
El 2017-06-16 08:52, Fabrice Bacchella escribió:
I just read the blog entry about performance increate in for the
python sdk
(https://www.ovirt.org/blog/2017/05/higher-performance-for-python-sdk/).
I'm quite sceptical about pipelining.
I disagree. Even without reading the post you mention,
Hi
Well I've got myself into a fine mess.
host01 was setup with hosted-engine v4.1. This was successful.
Imported 3 VMs from a v3.6 OVirt AIO instance. (This OVirt 3.6 is still
running with more VMs on it)
Tried to add host02 to the new Ovirt 4.1 setup. This partially succeeded
but I couldn't
>From the agent.log,
MainThread::INFO::2017-06-15
11:16:50,583::states::473::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm is running on host ovirt-hyp-02.reis.com (id 2)
It looks like the HE VM was started successfully? Is it possible that the
ovirt-engine service
Good morning,
Info requested below.
[root@ovirt-hyp-02 ~]# hosted-engine --vm-start
Exception in thread Client localhost:54321 (most likely raised during
interpreter shutdown):VM exists and its status is Up
[root@ovirt-hyp-02 ~]# ping engine
PING engine.example.lan (192.168.170.149) 56(84)
The oVirt Project is pleased to announce the availability of the Second
Release Candidate of oVirt 4.1.3 for testing, as of June 16th, 2017
This is pre-release software. Please take a look at our community page[1]
to know how to ask questions and interact with developers and users.
All issues or
I don't notice anything wrong on the gluster end.
Maybe Simone can help take a look at HE behaviour?
On Fri, Jun 16, 2017 at 6:14 PM, Joel Diaz wrote:
> Good morning,
>
> Info requested below.
>
> [root@ovirt-hyp-02 ~]# hosted-engine --vm-start
>
> Exception in thread
Hello,
between problems solved in upcoming 4.1.3 release I see this:
Lost Connection After Host Deploy when 4.1.3 Host Added to 4.1.2 Engine
tracked by
https://bugzilla.redhat.com/show_bug.cgi?id=1459484
As a matter of principle I would prefer to force that an engine version
must be greater or
On Fri, Jun 16, 2017 at 5:27 PM, Gianluca Cecchi
wrote:
> Hello,
> between problems solved in upcoming 4.1.3 release I see this:
>
> Lost Connection After Host Deploy when 4.1.3 Host Added to 4.1.2 Engine
> tracked by
>
On Thu, Apr 27, 2017 at 11:25 AM, Evgenia Tokar wrote:
> Hi,
>
> It looks like the graphical console fields are not editable for hosted
> engine vm.
> We are trying to figure out how to solve this issue, it is not recommended
> to change db values manually.
>
> Thanks,
> Jenny
23 matches
Mail list logo