Hi Simone,
I'm seeing the same error with new hosted-engine0setup RPM...
...
[ ERROR ] fatal: [ovirt.gh.ltresources.co.uk]: FAILED! => {"changed": true,
"cmd": "engine-backup --mode=restore
--log=/var/log/ovirt-engine/setup/restore-backup-$(date -u
+%Y%m%d%H%M%S).log --file=/root/engine_backup
Just to make it clear, by "make an interface" you mean you created new
logical VM networks, one without VLAN set, the rest with VLAN? You should
attach those networks to your bonding in Setup Networks dialog. Then you
should be able to connect VMs to any of these networks. On untagged VM NIC
you
Correct. On the host i have 1 management interface (ovirtmngmt) and 1 bonded
pair of 10GB interfaces (bond0)
Under Networks I have created the following networks.
VLAN70 - Tagged with 70
20GBBond - no tagging
In the host I added both VLAN70 and 20GBBond via the Setup Network. I dragged
the two
Adding also Didi on this.
Brett, are you using the latest ovirt-engine-appliance?
On Fri, Oct 26, 2018 at 1:31 PM Maton, Brett
wrote:
> Hi Simone,
>
> I'm seeing the same error with new hosted-engine0setup RPM...
> ...
> [ ERROR ] fatal: [ovirt.gh.ltresources.co.uk]: FAILED! => {"changed":
>
When I try to export a vm to ova, get this below error in engine log
2018-10-26 12:11:36,657-04 ERROR
[org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback]
(EE-ManagedThreadFactory-engineScheduled-Thread-37) [484d3716] EngineException:
ENGINE (Failed with error ENGINE and code
When I try to export a vm to ova, get this below error in engine log
2018-10-26 12:11:36,657-04 ERROR
[org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback]
(EE-ManagedThreadFactory-engineScheduled-Thread-37) [484d3716] EngineException:
ENGINE (Failed with error ENGINE and code
On Fri, Oct 26, 2018 at 8:58 PM wrote:
> When I try to export a vm to ova, get this below error in engine log
>
> 2018-10-26 12:11:36,657-04 ERROR
> [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback]
> (EE-ManagedThreadFactory-engineScheduled-Thread-37) [484d3716]
>
Hi again!
I found where I did mistake. So, I created custom instance type for vms, and
there is no vNic. This strange, because there is no vNic available at all in
instance. Should I create in some special way?
https://prnt.sc/lar8ph
https://prnt.sc/lar9dt
-Original Message-
From: Luca
Hi,
we observed high count of getVolumeSize() calls in vdsm.log Looking
at the logs it seems as if this is done every minute for all disk that
are currently running on a node.
Is this frequency normal and if yes why?
Best regards.
Markus
Mit freundlichen
Hello I am with same problem.
● origin-master-controllers.service - Atomic OpenShift Master Controllers
Loaded: loaded
(/usr/lib/systemd/system/origin-master-controllers.service; enabled; vendor
preset: disabled)
Active: inactive (dead) (Result: exit-code) since Fri 2018-10-26
15:27:19
Appreciate your quick reply.
1. File permission:
[root@ca-ovsx131 images]# ll
drwxr-xr-x. 2 vdsm kvm 5 Oct 26 13:40 7af3ed03-9be5-4c29-b1f2-2566a00671ba
[root@ca-ovsx131 images]# ll f83b2026-099d-4983-9130-fa999bd2a782/
total 1028
-rw-rw. 1 vdsm kvm 1073741824 Oct 26 13:31
1. file permission
[root@ca-ovsx131 images]# ll 7af3ed03-9be5-4c29-b1f2-2566a00671ba/
total 1286
-rw-rw. 1 vdsm kvm 196624 Oct 26 13:40 f4a9a516-12b1-47ff-b2f9-e5d792669b3c
-rw-rw. 1 vdsm kvm 1048576 Oct 26 13:40
f4a9a516-12b1-47ff-b2f9-e5d792669b3c.lease
-rw-r--r--. 1 vdsm kvm 267
Hello,
the template seems good. How is the pool configured?
On Thu, Oct 25, 2018 at 5:13 PM Администраторы wrote:
>
> Hello Luca,
> But there is an interface, as well as in a virtual machine that was a template
> http://prntscr.com/ladwp9
> But after creating pool, no nic gonna been added, I
On Fri, Oct 26, 2018 at 9:52 AM Maton, Brett
wrote:
> Hi Simone,
>
> Can I simply installed the 4.2.7 hosted-engine-setup rpm on top of the
> 4.2.6 installation on the node I'm using to redeploy SHE, or should I bump
> everything to the 4.2.7 pre-release ?
>
You can simply update
Hi Simone,
Can I simply installed the 4.2.7 hosted-engine-setup rpm on top of the
4.2.6 installation on the node I'm using to redeploy SHE, or should I bump
everything to the 4.2.7 pre-release ?
Regards,
Brett
On Fri, 26 Oct 2018 at 08:35, Simone Tiraboschi wrote:
>
>
> On Fri, Oct 26, 2018
Hi Benny,
As per the doc, I did the following, Is this the correct way to unlock the
VM ?
cd /usr/share/ovirt-engine/setup/dbutils
./unlock_entity.sh -t vm c002bf24-bd34-4954-83ce-03619d7438fd
Caution, this operation may lead to data corruption and should be used with
care. Please contact
oVirt: 4.2.6.2-1
I'm Moving hosted engine from one storage domain to another by backing up
and restoring the engine.
New VM provisioned in new storage domain, I get as far as trying to restore
the backup:
but am getting this DbJustRestored Error:
engine-backup --mode=restore
On Fri, Oct 26, 2018 at 9:23 AM Maton, Brett
wrote:
> oVirt: 4.2.6.2-1
>
> I'm Moving hosted engine from one storage domain to another by backing up
> and restoring the engine.
>
> New VM provisioned in new storage domain, I get as far as trying to
> restore the backup:
>
> but am getting this
On Thu, Oct 25, 2018 at 4:29 PM Brendan Holmes wrote:
> “The issue here is that it seams that your VM never got an address from
> libvirt default network DHCP” – but aren’t I obviating DHCP by using
> parameter:
>
> OVEHOSTED_VM/cloudinitVMStaticCIDR=str:10.0.0.109/24
>
> ? VM should receive a
The oVirt Project is pleased to announce the availability of the oVirt
4.2.7 Fifth Release Candidate, as of October 26th, 2018.
This update is a release candidate of the seventh in a series of
stabilization updates to the 4.2
series.
This is pre-release software. This pre-release should not to be
20 matches
Mail list logo