On Tue, 22 Jan 2019 07:33:19 -
"ada per" wrote:
> Thank you i try pinging Host1 from Host 2 with the following results:
> On a logical network Host1 can ping host2 but while on a VLAN host 1 cannot
> ping host2.
>
> The hosts are physically connected via a switch.
Can you please check if
Dears,
Could you answer how can I fix my problem?
Thanks
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovi
The oVirt Project is pleased to announce the general availability of oVirt
4.2.8, as of January 22nd, 2019.
This update is the eighth and last in a series of stabilization updates to
the 4.2 series.
Please note that no further updates will be issued for the 4.2 series.
We encourage users to upgra
I am reading about VirGL but I am not sure how to set it up, can anyone
point me to some documentation?
Cheers.
On 17/1/19 17:20, Josep Manel Andrés Moscardó wrote:
Hi,
I got vGPU through mdev working but I am wondering how I would connect
to the client and make use of the GPU. So far I try
On Wed, 12 Dec 2018 15:25:56 -
"Brian Wilson" wrote:
> Is there a way to prevent Roles Assigned to Groups on Objects to only apply
> to where it is set?
>
>
> Basically looking for a way to do what we had done in VMWare which involved
> using the do not propagate permission setting.
>
>
On Wed, Dec 12, 2018 at 5:27 PM Brian Wilson wrote:
> Is there a way to prevent Roles Assigned to Groups on Objects to only
> apply to where it is set?
>
>
> Basically looking for a way to do what we had done in VMWare which
> involved using the do not propagate permission setting.
>
>
> be able
Hi,
The lastHourAgg should be the hour before last. But for some reason it is 1
hour after that.
Do you know when this started?
Thi fix the issue you need to update the "lastHourAgg" .
Please run the following commands:
service ovirt-engine-dwhd stop
su postgres -c 'psql -d ovirt_engine_histo
Hello!
I'm running oVirt 4.2.7.5-1.el7 on 3 hosts cluster.
Cluster CPU Type is "AMD Opteron G3".
On default cluster I can see the warning:
"Warning: The CPU type 'AMD Opteron G3' will not be supported in the
next minor version update'"
Is it still supported in version 4.2.8? I can't see refer
Thank you Lucie,
I assigned a role to a user and the user can now log in.
Thanks a lot
On Tue, Jan 22, 2019 at 9:03 AM Lucie Leistnerova
wrote:
> Hi Sakhi,
> On 1/22/19 7:52 AM, Sakhi Hadebe wrote:
>
> Hi,
>
> I need some pointers to documentation that will help me to configure users
> to have
Hello Guys,
Thanks for answers.
During install, we’ve fond “final system”, which seem called “0+1” is mount in
a temp partition. All modifications need to be done into this tmp mount.
@Ryan, I will try to make my actions before nodectl init , and give a feedback
Thanks !
De : Ryan
Thank you for your reply amd advice.
I ve tried that, but unfortunately when the vm-router starts on host1 it will
only assign IPs toVMs residing on host1. If i migrate the vm-router on host2
it will assign IPs only on Vms residing on host2.
And even if i assign IPs manually..
I can ping all
Thank you for all the advice.
The reason for the issue was the physical switch like you said!!
The issue is now fixed.
Thanks 😊
On Tue, 22 Jan 2019, 10:04 Dominik Holler On Tue, 22 Jan 2019 07:33:19 -
> "ada per" wrote:
>
> > Thank you i try pinging Host1 from Host 2 with the following
On Tue, 22 Jan 2019 16:18:06 +0200
ada per wrote:
> Thank you for all the advice.
>
> The reason for the issue was the physical switch like you said!!
>
> The issue is now fixed.
>
Thanks for letting us know!
> Thanks 😊
>
>
> On Tue, 22 Jan 2019, 10:04 Dominik Holler
> > On Tue, 22 Jan
Hello Stefano,
On 1/22/19 12:40 PM, Stefano Danzi wrote:
Hello!
I'm running oVirt 4.2.7.5-1.el7 on 3 hosts cluster.
Cluster CPU Type is "AMD Opteron G3".
On default cluster I can see the warning:
"Warning: The CPU type 'AMD Opteron G3' will not be supported in the
next minor version update'"
On Mon, Jan 21, 2019 at 6:10 PM Gianluca Cecchi
wrote:
> Hello,
> it happened two times, always with VMs composed by more than 1 disk.
> Now I have a VM with 9 disks and a total of about 370Gb:
> 1 x 90Gb
> 5 x 50Gb
> 3 x 10Gb
>
> I export vm to an export domain and it started 2 hours and 10 minu
Hi all,
If anyone uses latest pycurl 7.43 provided by pip or ansible tower/awx,
any ovirtsdk4 calling will issue with the log:
The full traceback is:
WARNING: The below traceback may *not* be related to the actual failure.
File "/tmp/ansible_ovirt_auth_payload_L1HK9E/__main__.py", line 202,
Just for the record, oVirt has a VM Portal which enables this use case
without a need to change the permission.
On Sat, Dec 8, 2018, 14:05 Staniforth, Paul Glad your sorted, I've added a bugzilla entry
>
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1656794
>
>
> basically Webadmin allows you t
17 matches
Mail list logo