I increased RX ring params on the interface and restarted networking on
each host. So far the error counts on all three hosts 1gig interfaces are
still at zero. Will see how it holds up
On Thu, Jun 6, 2019 at 12:20 PM Jayme wrote:
> I have a three node HCI setup on Dell R720s running the
Hi -
Looks like Friday is right around the corner...
Have a really stupid question.
Is there a way to edit disk description (or extend it's size) without
attaching that disk to some VM and editing disk there?
Thanks!
--
Dmitry Filonov
Linux Administrator
SBGrid Core | Harvard Medical School
Can you remove bricks that belong to a fried server? Either from a GUI or
CLI
You should be able to do so and then it should allow you to remove host
from the oVirt setup.
--
Dmitry Filonov
Linux Administrator
SBGrid Core | Harvard Medical School
250 Longwood Ave, SGM-114
Boston, MA 02115
On
Hello,
I came upon a problem the previous month that I figured it would be good to
discuss here. I'm sorry I didn't post here earlier but time slipped me.
I have set up a glustered, hyperconverged oVirt environment for experimental
use as a means to see its behaviour and get used to its
When I read your intro, and I hit the memory figure, I was saying to
myself, what
I'd definitely increase the memory if possible. As high as you can
affordably fit into the servers.
Engine asks 16GB at installation time, add some for gluster services and
you're at your limits before you add
I've realized that moving an HE host to another DC/CL is not prevented, leading
to an awkward situation for which the host is UP in the new CL but still
retains the "silver crown". Moreover, "hosted-engine --vm-status" on another HE
host still show the departed host with score 0. The same
Hi,
We're running oVirt 4.1.9 (cannot upgrade yet until [1] is released).
Since a few days ago our event list if full of lines like this:
ETL service sampling has encountered an error. Please consult the
service log for more details.
Having a look at the log I see events like:
The oVirt Project is pleased to announce the availability of the oVirt
4.3.4 FourthRelease Candidate, as of June 6th, 2019.
This update is a release candidate of the fourth in a series of
stabilization updates to the 4.3 series.
This is pre-release software. This pre-release should not to be used
On Sat, May 25, 2019 at 5:06 AM wrote:
> Hello,
>
> I've a problem, all my ovirt hosts and vms are linked with a bonding mode
> 1(Active-Backup)2x10Gbps
> ovirt version:4.3
> topology:
>--eno2
>
I have a three node HCI setup on Dell R720s running the latest stable
version of 4.3.3
Each hosts has a 1gig link and a 10gig link. The 1gig is used for ovirt
management network and 10gig link is used for backend glusterFS traffic.
I haven't noticed before but after installing ovirt metrics
On Jun 6, 2019 12:52, souvaliotima...@mail.com wrote:
>
> Hello,
>
> I came upon a problem the previous month that I figured it would be good to
> discuss here. I'm sorry I didn't post here earlier but time slipped me.
>
> I have set up a glustered, hyperconverged oVirt environment for
Leo, I forgot to mention that I have 1 SSD disk for caching purposes,
wondering how that setup should be achieved?
thanks,
Adrian
On Wed, Jun 5, 2019 at 11:25 PM Adrian Quintero
wrote:
> Hi Leo, yes, this helps a lot, this confirms the plan we had in mind.
>
> Will test tomorrow and post the
Hi Nicolas,
Please open a bug in bugzilla and attach the ovirt-engine-dwh.log,
engine.log,
The versions of ovirt-engine and ovirt-engine-dwh
and any other relevant information that you can tell about your env.
Did you do any change before this issue started?
Best regards,
--
Shirly Radco
BI
I'll presume you didn't fully backup your hosts root file systems on the
host which was fried.
It may be easier to replace with a new hostname/IP.
I would focus on the gluster config first, since it was hyperconverged.
I don't know which way engine UI is using to detect gluster mount on
missing
Definitely is a challenge trying to replace a bad host.
So let me tell you what I see and have done so far:
1.-I have a host that went bad due to HW issues.
2.-This bad host is still showing in the compute --> hosts section.
3.-This host was part of a hyperconverged setup with Gluster.
4.-The
Hi Sandro,
thanks for the update.I have noticed in RC3 and now in RC4 that data gluster
bricks does not provide "Advanced Details", while the arbiter does.
I'm mentioning that , as oVirt is currently being rebased for gluster v6 (my
setup is using gluster v6.1 from CentOS 7 repos) and you can
I tried removing the bad host but running into the following issue , any
idea?
Operation Canceled
Error while executing action:
host1.mydomain.com
- Cannot remove Host. Server having Gluster volume.
On Thu, Jun 6, 2019 at 11:18 AM Adrian Quintero
wrote:
> Leo, I forgot to mention that I
Have you tried with "Force remove" tick ?
Best Regards,Strahil Nikolov
В четвъртък, 6 юни 2019 г., 21:47:20 ч. Гринуич+3, Adrian Quintero
написа:
I tried removing the bad host but running into the following issue , any idea?
Operation Canceled
Error while executing action:
18 matches
Mail list logo