[ovirt-users] Re: Scenario: Ovirt-engine on hardware and recovery

2019-12-03 Thread Yedidyah Bar David
On Tue, Dec 3, 2019 at 3:44 PM Robert Webb wrote: > > Didi, > > Thanks for the reply. > > Yes, backups are done, I am just thinking in the case of Murphy's Law where > nothing works and the engine is gone. I am also new to oVirt and am always > loking for the "proper" backup method as you have

[ovirt-users] Re: Current status of Ceph support in oVirt (2019)?

2019-12-03 Thread Matthias Leopold
Am 24.11.19 um 11:58 schrieb Benny Zlotnik: The current plan to integrate ceph is via cinderlib integration[1] (currently in tech preview mode) because we still have no packaging ready, there are some manual installation steps required, but there is no need to install and configure

[ovirt-users] Windows VirtIO drivers

2019-12-03 Thread Vijay Sachdeva
Dear Team, How can we install virtIO windows drivers to Windows 2016. As of now I tried to attach floppy drive with virtio-win.vfd image but while installing drivers didn’t get loaded. Please guide or let me know the proper way to install drivers. Vijay Sachdeva

[ovirt-users] Re: Upgrade ovirt from 3.4 to 4.3

2019-12-03 Thread Luca 'remix_tj' Lorenzetto
Hello, as far as i remember from my certification course, ovirt/rhv 3.5 is still based on 6. So you can easily upgrade in place and then make detach/attach. Luca On Tue, Dec 3, 2019 at 9:13 AM wrote: > > I have found also this topic: > > https://access.redhat.com/articles/1390733 > > "RHEV 3.5

[ovirt-users] Re: Cannot activate/deactivate storage domain

2019-12-03 Thread Albl, Oliver
Hi, does anybody have an advice how to activate or safely remove that storage domain? Thank you! Oliver -Ursprüngliche Nachricht- Von: Oliver Albl Gesendet: Dienstag, 5. November 2019 11:20 An: users@ovirt.org Betreff: [ovirt-users] Re: Cannot activate/deactivate storage domain >

[ovirt-users] Re: Scenario: Ovirt-engine on hardware and recovery

2019-12-03 Thread Yedidyah Bar David
On Tue, Dec 3, 2019 at 4:38 AM wrote: > > So thinking about my setup, I am thinking through different failure scenarios. > > So lets say I have a small physical server with 8 cores and 16GB RAM and I > install Centos 7 and ovirt-engine on bare metal. This would also be the same > scenario is

[ovirt-users] Re: Current status of Ceph support in oVirt (2019)?

2019-12-03 Thread Benny Zlotnik
> We are using Ceph with oVirt (via standalone Cinder) extensively in a > production environment. > I tested oVirt cinderlib integration in our dev environment, gave some > feedback here on the list and am currently waiting for the future > development. IMHO cinderlib in oVirt is currently not fit

[ovirt-users] Re: oVirt nodes not responding

2019-12-03 Thread herrmann . tim92
Is there no one who has an idea ...? ;( ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:

[ovirt-users] Re: Upgrade ovirt from 3.4 to 4.3

2019-12-03 Thread lu . alfonsi
I have found also this topic: https://access.redhat.com/articles/1390733 "RHEV 3.5 supports both RHEL6 and RHEL7 hosts (RHEL or RHEV-H). It is recommended to upgrade your hosts to RHEL7 once on RHEV 3.5." If this is true i could make an update of the hypervisors 6 and not a reinstall with

[ovirt-users] Re: Disk move succeed but didn't move content

2019-12-03 Thread jplor...@gmail.com
Yes. I'm doing some works arround to see if I can get the domain moved to an ISCSI lun, but as the original domain was on glusterfs, I'm dealing now with gluster stuff. Regards El dom., 1 de diciembre de 2019 5:15 a. m., Amit Bawer escribió: > > > On Sun, Dec 1, 2019 at 1:32 AM

[ovirt-users] Sigh... still vdsmd memory leak

2019-12-03 Thread Chris Adams
I've seen vdsmd leak memory (RSS increasing) for a while, and never gotten anywhere with diagnosing it. I upgraded a small setup (2 hosts with hosted engine and iSCSI SAN) last week to 4.3.7 plus latest CentOS 7.7 updates, and I am still seeing this. Currently, there are only 3 active VMs, plus

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Vijay Sachdeva
Hi Gal, I have downloaded the virtio-win_x86.vfd  and uploaded to ISO domain. Used Run Once and attached the floppy drive, while looking for drivers in A drive it gives below error: I followed all the steps as per the guidelines shared in the document. Don’t know what I am missing.

[ovirt-users] Re: AWX and error using ovirt as an inventory source

2019-12-03 Thread Nathanaël Blanchet
Great, I hope Gianluca will be able to sync with the container version! De: "Guillaume Pavese" À: "Nathanaël Blanchet" Cc: "Gianluca Cecchi" , "users" Envoyé: Mardi 3 Décembre 2019 04:07:53 Objet: Re: [ovirt-users] Re: AWX and error using ovirt as an inventory source My problem was

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Gal Zaidman
Going back to the user list, just in case it will be relevant to others On Tue, Dec 3, 2019 at 3:02 PM Vijay Sachdeva wrote: > Hi Gal, > > > > Thank you so much for replying, can you please a steps to do that. Right > now what I am doing is: > > > >1. Installed Windows 2016 using IDE

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Vijay Sachdeva
Anyone, please let me know. Really stuck at this point. I am using Ovirt Manager 4.3 and while installing Windows VMs If I used disk type as IDE, I can see the disks to install the OS but if I use virtIO-scsi for disks the disk is not seen. So I attached floppy disk to VM, but it says no

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Lev Veyde
Hi Vijay, Have you tried to load them from the VirtIO-Win ISO ? Thanks in advance, On Tue, Dec 3, 2019 at 3:30 PM Vijay Sachdeva wrote: > Hi Gal, > > > > I have downloaded the virtio-win_x86.vfd and uploaded to ISO domain. Used > Run Once and attached the floppy drive, while looking for

[ovirt-users] Ovirt-OSN integration

2019-12-03 Thread siovelrm
Hi, I want to use External Logical Networks Openstack Neutron. For this it is necessary to have all Openstack installed or is it possible to have only Neutron and used as a service? Sorry if the question is very obvious but I am starting now with this topic.

[ovirt-users] Windows Sluggish Performance

2019-12-03 Thread Vijay Sachdeva
Hello Everyone, I managed to install Windows Server 2016 server on Ovirt node using ovirt engine.All virtio-Win drivers also installed, but the performance of Windows using console is very sluggish and mouse pointer is not at all responsive. Can anyone let me know, what could be the reason. Not

[ovirt-users] Failed export to OVA

2019-12-03 Thread Geoff Sweet
I'm currently running a stand alone server on 4.2.0.2-1.el7.centos. I know this is an older version and I am trying to do some exports for migrations off of it. The Export to OVA seems simple enough but it fails consistently and I really can't figure out why. The logfiles don't provide a lot of

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Strahil Nikolov
Also , I forgot to mention that there is a set of tools that can also be used (as far as I know , they are a kind of experimental - so skip using them in production ): https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.173-2/ Any feedback can be

[ovirt-users] Re: Windows Sluggish Performance

2019-12-03 Thread Vijay Sachdeva
Anyone? On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva wrote: > Hello Everyone, > > I managed to install Windows Server 2016 server on Ovirt node using ovirt > engine.All virtio-Win drivers also installed, but the performance of > Windows using console is very sluggish and mouse pointer is not

[ovirt-users] Re: Scenario: Ovirt-engine on hardware and recovery

2019-12-03 Thread Jayme
Take a look at vProtect for backups. Works really well for our environment, and supports incremental backups as well which is very handy. It's free for up to 10 VMs to try. On Tue, Dec 3, 2019 at 4:20 PM Robert Webb wrote: > Didi, > > Thanks for the reply. > > Yes, backups are done, I am just

[ovirt-users] Re: Scenario: Ovirt-engine on hardware and recovery

2019-12-03 Thread Robert Webb
Didi, Thanks for the reply. Yes, backups are done, I am just thinking in the case of Murphy's Law where nothing works and the engine is gone. I am also new to oVirt and am always loking for the "proper" backup method as you have laready mentioned using engine-backup. Storage is NFS backed

[ovirt-users] Re: Windows VirtIO drivers

2019-12-03 Thread Strahil Nikolov
Usually I add a small disk of type virtio and another NIC (also virtio).Then if you install , you set the windows DVD as bootable and once you reach the moment to select your disk , you have an option to search in a DVD for drivers.Then you go to Admin Portal , select your VM and from the 3

[ovirt-users] Re: Windows Sluggish Performance

2019-12-03 Thread Lev Veyde
Hi Vijay, Have you tried to run something in the VM? I want to understand if the performance of the VM is slow, or just the console access seems to be slow. Thanks in advance, On Tue, Dec 3, 2019 at 9:31 PM Vijay Sachdeva wrote: > Anyone? > > On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva >

[ovirt-users] Re: Windows Sluggish Performance

2019-12-03 Thread Strahil
What is your virtual GPU ? I'm using QLX, and despite being sluggish, when you tune windows for best performance -it is workable. Of course, if you passthrough a GPU, performance will be completely different. Best Regards, Strahil NikolovOn Dec 3, 2019 21:19, Vijay Sachdeva wrote: > > Anyone?

[ovirt-users] Re: Windows Sluggish Performance

2019-12-03 Thread Christopher Cox
I tend to VNC my Windows VMs, including server. Last one I tested was 2019 Server, seemed to work ok. On 12/3/19 1:19 PM, Vijay Sachdeva wrote: Anyone? On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva mailto:vijay.sachd...@indiqus.com>> wrote: Hello Everyone, I managed to install

[ovirt-users] Re: Windows Sluggish Performance

2019-12-03 Thread Vijay Sachdeva
Hey, The problem what I have found is when I am using SPICE as default console option, the  console performance is very sluggish. So what I understand here is one needs to install additional spice guest tools to improve the performance as it includes QLX video driver.