[ovirt-users] Re: oVirt 4.4.0 Release is now generally available

2020-08-11 Thread Strahil Nikolov via Users
I have been using v7 for quite some time. Best Regards, Strahil Nikolov На 11 август 2020 г. 15:26:51 GMT+03:00, olaf.buitel...@gmail.com написа: >Dear oVirt users, > >any news on the gluster support side on oVirt 4.3. With 6.10 being >possibly the latest release, it would be nice if there is

[ovirt-users] Re: Hosted Engine Deployment stuck at 3. Prepare VM

2020-08-11 Thread Gobinda Das
You can check /var/log/ovirt-hosted-engine-setup log for prepare vm --- Thanks Gobinda From: hkexdong--- via Users Sent: Tuesday, August 11, 2020 8:03:31 PM To: users@ovirt.org Subject: [ovirt-users] Hosted Engine Deployment stuck at 3. Prepare VM oVirt Node

[ovirt-users] Re: oVirt 4.4.0 Release is now generally available

2020-08-11 Thread Strahil Nikolov via Users
Hey Olaf, you can add the CentOS Storage SIG repo and patch. Best Regards, Strahil Nikolov На 11 август 2020 г. 21:27:23 GMT+03:00, Olaf Buitelaar написа: >Hi Strahil, > >Thanks for confirming v7 is working fine with oVirt 4.3, it being from >you, >gives quite some faith. >If that's generally

[ovirt-users] Re: Hosted Engine Deployment stuck at 3. Prepare VM

2020-08-11 Thread Strahil Nikolov via Users
Have you tried to install the applance rpm manually ? Most problem you got repo issues . Best Regards, Strahil Nikolov На 11 август 2020 г. 17:33:31 GMT+03:00, hkexdong--- via Users написа: >oVirt Node version is 4.4.1. This version can successful deploy before. >But after I compile the RAID

[ovirt-users] Re: oVirt 4.4.0 Release is now generally available

2020-08-11 Thread Olaf Buitelaar
Hi Strahil, Thanks for confirming v7 is working fine with oVirt 4.3, it being from you, gives quite some faith. If that's generally the case it would be nice if the yum repo ovirt-4.3-dependencies.repo could be updated to the gluster - v7 in the official repository e.g.;

[ovirt-users] uprade from 4.3 to 4.4

2020-08-11 Thread suporte
Hello, is possible to upgrade from ovirt 4.3 to 4.4 ? Thanks -- Jose Ferradeira http://www.logicworks.pt ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: Request for feedback about "Overview of Networking in oVirt"

2020-08-11 Thread thomas
Thanks for putting in the effort! I learned a lot of new things. I also learned that I need to learn a few more now. The table could use some alternating background or a grid: Too easy to get lost. Environments change over time, e.g. you find you really should have split the management,

[ovirt-users] Is the udev settling issue more wide spread? Getting failed 'qemu-img -convert' also while copying disks between data and vmstore domains

2020-08-11 Thread thomas
While trying to diagnose an issue with a set of VMs that get stopped for I/O problems at startup, I try to deal with the fact that their boot disks cause this issue, no matter where I connect them. They might have been the first disks I ever tried to sparsify and I was afraid that might have

[ovirt-users] Re: Hosted Engine Deployment stuck at 3. Prepare VM

2020-08-11 Thread thomas
I came across this in an environment where the proxy was very slow. The downloaded image for the appliance gets deleted every so often (and perhaps also via the cleanup script), so when it needs to be reloaded from the internet, it can take its time, because its quite large (>1GB). Another

[ovirt-users] Re: Is the udev settling issue more wide spread? Getting failed 'qemu-img -convert' also while copying disks between data and vmstore domains

2020-08-11 Thread Strahil Nikolov via Users
Sounds like the gluster ACL bug. Did you recently patchbyour gluster ? Did you test functionality of oVirt after gluster upgrade? Check the brick logs for errors mentioning 'acl' (you might need to increase log level temporarily). If you do brick log reporting issues related to acl - you can

[ovirt-users] Re: Is the udev settling issue more wide spread? Getting failed 'qemu-img -convert' also while copying disks between data and vmstore domains

2020-08-11 Thread thomas
Hi Strahil, no updates, especially since I am stuck on 4.3.11 and they tell us it's final. Glusterfs is 6.9-1.el7. Apart from those three VMs and the inability to copy disks the whole farm runs fine so far. Where would I configure the verbosity of logging? Can't find an obvious config option.

[ovirt-users] Re: Is the udev settling issue more wide spread? Getting failed 'qemu-img -convert' also while copying disks between data and vmstore domains

2020-08-11 Thread Strahil Nikolov via Users
Gluster log level (both volume and brick) can be done by following https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level Can you test with a fresh (blank template) VM: - create a test VM - create snapshot - delete snapshot -

[ovirt-users] Re: Request for feedback about "Overview of Networking in oVirt"

2020-08-11 Thread Strahil Nikolov via Users
For the migration of the HCI to another set of NICs, it's possible. WARNING: Ensure that all hosts can reach themselves on the new IPs. ssh is a good test (unless it has been hardened). There are 2 paths to take: - Add the new ip as a peer and replace-brick to use the new ip/hostname/fqdn

[ovirt-users] Reverting to Snapshot

2020-08-11 Thread Christian Reiss
Hey folks, this, I hope, is a trivial question. But I really can't find the button for it. If you take a snapshot of any vm - how do you revert to that snapshot, discarding all changes after? I see options to clone, delete, take snapshot, preview... but revert? Really in the true sense of

[ovirt-users] Re: ovirt4.4.1 engine Deployment failure

2020-08-11 Thread Asaf Rachmani
Hi, Can you please share ansible version and logs from /var/log/ovirt-hosted-engine-setup. If the ansible version < 2.9.11, please upgrade it and try again. Regards, Asaf On Mon, Aug 10, 2020 at 10:17 AM wrote: > Hello, everyone > I am using these versions for my test : > -

[ovirt-users] Re: migrating standalone engine to selfhosted and upgrade from 4.3 to 4.4 in one step

2020-08-11 Thread Yedidyah Bar David
On Fri, Aug 7, 2020 at 1:37 PM Jiří Sléžka wrote: > > On 8/7/20 9:50 AM, Jiří Sléžka wrote: > > On 8/5/20 2:07 PM, Jiří Sléžka wrote: > >> On 8/3/20 11:12 AM, Jiří Sléžka wrote: > >>> Hello, > >>> > >>> I have 4 host cluster managed with standalone engine in version 4.3 and > >>> I would like to

[ovirt-users] Re: ovirt4.4 and ldap auth with starttls

2020-08-11 Thread Jiří Sléžka
On 8/7/20 5:11 PM, Martin Perina wrote: > Hi, > > legacy ciphers and protocols are disabled on EL8 by default, for more > information please take a look at crypto-policies: > > https://access.redhat.com/articles/3666211 > https://access.redhat.com/articles/3642912 > > So in theory if you switch

[ovirt-users] Request for feedback about "Overview of Networking in oVirt"

2020-08-11 Thread Dominik Holler
Hello, there is a new documentation "Overview of Networking in oVirt" available in https://www.ovirt.org/documentation/networking-overview/ Please let me know if you have any questions, comments, suggestions, or any kind of critics about this text. If you want to improve, you could also create

[ovirt-users] Re: oVirt 4.4.0 Release is now generally available

2020-08-11 Thread olaf . buitelaar
Dear oVirt users, any news on the gluster support side on oVirt 4.3. With 6.10 being possibly the latest release, it would be nice if there is an known stable upgrade path to either gluster 7 and possibly 8 for the oVirt 4.3 branch. Thanks Olaf ___

[ovirt-users] Hosted Engine Deployment stuck at 3. Prepare VM

2020-08-11 Thread hkexdong--- via Users
oVirt Node version is 4.4.1. This version can successful deploy before. But after I compile the RAID driver. It now stuck at Prepare VM. The last message is "[ INFO ] TASK [ovirt.hosted_engine_setup : Install ovirt-engine-appliance rpm]" According to the instructions from RAID controller